Scribd
Upload
84 views1 page

V Pol BiDiR

This document provides specifications for a multi-band bidirectional antenna with vertical polarization and a 65 degree half-power beam width operating within frequency ranges of 790-960 MHz and 1710-2170 MHz. Key specifications include a gain of 5-6.5 dBi, a VSWR of less than 2.2, input power rating of 200W, weight of 0.8kg, and mounting options for wall mounting or on a pipe mast using accessory clamps.

Uploaded by

Tahar Slim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
84 views1 page

V Pol BiDiR

This document provides specifications for a multi-band bidirectional antenna with vertical polarization and a 65 degree half-power beam width operating within frequency ranges of 790-960 MHz and 1710-2170 MHz. Key specifications include a gain of 5-6.5 dBi, a VSWR of less than 2.2, input power rating of 200W, weight of 0.8kg, and mounting options for wall mounting or on a pipe mast using accessory clamps.

Uploaded by

Tahar Slim
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Multi-band Bidirectional Antenna 790 – 960/1710 –2170

Vertical Polarization V
Half-power Beam Width 65°

VPol BiDir 790–960/1710–2170 65° 5dBi

Type No. 738 445 738 446


Input 1 x 7-16 female 1 x N female
Frequency range 790 – 960 MHz, 1710 – 2170 MHz
VSWR 790 – 806 MHz: < 2.2
806 – 824 MHz: < 1.7
824 – 960 / 1710 – 2170 MHz: < 1.5
Gain 790 – 960 MHz: 5 dBi
1710 – 1880 MHz: 5.5 dBi
1880 – 2170 MHz: 6.5 dBi
Impedance 50 Ω
Polarization Vertical
Max. power (total) 200 W (at 50 °C ambient temperature)
Weight 0.8 kg
Wind load Frontal: 25 N (at 150 km/h)
Lateral: 65 N (at 150 km/h)
Rearside: 35 N (at 150 km/h)
13
Max. wind velocity 200 km/h
Packing size 422 x 212 x 95 mm
dia. 8.5
Height/width/depth 312 / 55 / 188 mm

Material: Radiator: Tin-plated copper.


Reflector: Weather-proof aluminum.
Radome: High impact plastic, colour: Grey.
All screws and nuts: Stainless steel.
400
371

Mounting: Wall mounting: No additional mounting kit


needed.
For pipe mast mounting use clamps listed below
(order separately).

Ice protection: The radiating system is protected by the radome.


Due to its very sturdy construction, the antenna
remains operational even under icy conditions.
54.4 188

Grounding: All metal parts of the antenna as well as the inner


All dimensions in mm
conductor are DC grounded.
Subject to alteration.

Accessories (order separately)


Weight Units per
Type No. Description Remarks
approx. antenna

734 360 2 clamps Mast: 34 – 60 mm diameter 60 g 1


10
936.1870/e

734 361 2 clamps Mast: 60 – 80 mm diameter 70 g 1


734 362 2 clamps Mast: 80 – 100 mm diameter 80 g 1
dB

3
734 363 2 clamps Mast: 100 – 120 mm diameter 90 g 1
734 364 2 clamps Mast: 120 – 140 mm diameter 110 g 1 0

734 365 2 clamps Mast: 45 – 125 mm diameter 80 g 1 Typical Horizontal Pattern

738 445, 738 446 Page 1 of 1


Internet: www.kathrein.de
KATHREIN-Werke KG . Anton-Kathrein-Straße 1 – 3 . P.O. Box 10 04 44 . 83004 Rosenheim . Germany . Phone +49 8031 184-0 . Fax +49 8031 184-973

You might also like