Wireless Notice Board Using RF Waves
Payal P. patil 1, Hrutuja T. Devarde 2, Prajakta S. Kumbhar 3,
Mr.K.V. Patil 4
Assistant Professor 4, Student 123
Department of Electronics And Telecommunication Engineering
Nanasaheb Mahadik college Of Engineering, Peth.(India)
ABSTRACT
This project deals with an innovative rather an interesting manner of intimating the message to the
people using a wireless electronic display board which is synchronized using the RF waves based
software technology. This will help us in passing any message almost immediately without any delay just
by sending a message by using windows software. Which is better and more reliable than the old
traditional way of pasting the message on notice board. This proposed technology can be used in many
public places, malls or big buildings to enhance the security system and also make awareness of the
emergency situations and avoid many dangers. Using various commands is used to display the message
onto the display board. This technology is used to control the display board and for conveying the
information through a message sent from authenticated user.
Keyword : RF module, VB.net software
I.INTRODUCTION
People are now adapted to the idea of the world at its finger tips .Now a days advertisement is going digital
form. The malls, railway stations and the shopping centers used digital displays now. Also, in trains and buses
the information like platform number, ticket information is displayed in digital boards. [2]
There is long process involve a order to put up the notices on the notice board in the institution. Urgent notices
should be displayed immediately and it should be highlighted. In this digitalized era in the institutions the
notices are still displayed in the board and required paper work sometimes the important notices are missed
which known immediately. Where LED displays are widely used in public areas for various types of display.
Because of large screen, long life and flexibility display the proposed system is very useful in this area. It can
announce a notice just by typing on computer in the application window. [3]
The built application window is easy to use. The authentication feature is also added so that there will be no
misuse, if needed. The authentication can be provided to different person and the limited authority can be added
remove the „delete‟ button for lower authority member. [3]
688 | P a g e
II.LITERATURE REVIEW
Notice board is primary thing in a any institution/ organization or public utility places. A new display using the
RF module technology to access it by communication between PIC controller and PC. This system is compact,
compatible and easy handling. [1]
1970‟s for increasing the lack of frequencies in the radio telephone services which in turn lead to introduction of
AMPS (Advanced Mobile Phone System) where the transmission was analog based. This was known to be the
first generation in cellular networks. The second generation was based on digital transmission and was called
with various abbreviations as GSM (Global System for Mobile communications), ERMES (European Radio
Messaging System).
Various Cordless telephone standards were also introduced during this time only. The third generation has risen
with the unification of different technologies; some of them which are popularly known are FPLMTS (Future
Public Land Mobile Telecommunications System), UMTS (Universal Mobile Telecommunication System), and
IMT-2000(International Mobile Telecommunication). [4]
III.BLOCK DIAGRAM
Transmitter
Computer Software RF
Dot Net/Java TX-RX
Master Unit
Matrix LED display
RF
TX-RX Controller Buzzer
16F877A
Controller
Display 16*2
16F877A
Controller Power Supply Crystal Oscillator
16F877A
689 | P a g e
Slave Unit
RF TX-RX Matrix LED Display
Controller
16F877A
3.1PROPOSED WORK
In the work is done on notice display but PIC16F877A is being used for controlling the system and for display
the notice only LED matrix is used A voltage regulator is designed to automatically maintain constant voltage
level. It is used to stabilize the dc voltage by the processor and other elements. Microcontroller receives the
message from Radio Frequency module on receiver side and display it on LED matrix screen. It provides
synchronization between Transmitter and Receiver.
The power consumption of display is very low. An 8-bit PIC microcontroller is used to control the generating
different character patterns. [3]
IV. CONCLUSION
Using this notice board, paper work will be decreased and its time consuming technique. Message will be
secured. This system is used in the Schools, colleges and various places such as industries, stations to display
any kind of notices or messages. This system also can be used for advertisement. “RF based wireless notice
board using microcontroller” we designed this notice board is working properly for college purpose.
REFERANCE
[1] Journal Paper-IOSR Journals-International journal of advanced technology in engineering and science, this
method can be discarded by using wireless notice board to display.
[2]Advanced in Electronic And Electric Engineering. ISSN 2231-1297, Volume 3 no. 7(2013), pp.827-
832research India publication.
690 | P a g e
[3]International journal of innovative research in computer and communication engineering(an ISO 3297:2007
certified Organization)vol.4,issue 6,june 6
[4]International Journal of Electrical, Electronics and Data Communication, ISSN: 2320-2084 Volume-1, Issue-
10, Dec-2013.
[5]IOSR Journal of Computer Engineering (IOSR-JCE) e-ISSN: 2278-0661, p-ISSN: 2278-8727, PP 15-17
www.iosrjournals.org
691 | P a g e
