Scribd
Upload
144 views

Akhil Bharatvarshiya Marwari Aggarwal Jatiya Kosh: Plate Load Test Report

The document contains two plate load test reports with details of the load applied to a 300mm square test plate and the resulting settlement measurements. For PLT 1, the maximum applied load was 12 tonnes and maximum settlement was 6.4mm. For PLT 2, the maximum applied load was 10 tonnes and maximum settlement was 4.035mm. Both tests recorded the settlement under increasing and decreasing applied loads to determine the load-settlement curves.

Uploaded by

Ganesh
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
144 views

Akhil Bharatvarshiya Marwari Aggarwal Jatiya Kosh: Plate Load Test Report

The document contains two plate load test reports with details of the load applied to a 300mm square test plate and the resulting settlement measurements. For PLT 1, the maximum applied load was 12 tonnes and maximum settlement was 6.4mm. For PLT 2, the maximum applied load was 10 tonnes and maximum settlement was 4.035mm. Both tests recorded the settlement under increasing and decreasing applied loads to determine the load-settlement curves.

Uploaded by

Ganesh
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 2

Akhil Bharatvarshiya Marwari Aggarwal Jatiya Kosh

Plate Load Test Report Pressure Total Gross Pressure Total Gross
Plate Load Test : PLT 1 Gauge Load Settlement Gauge Load Settlement
Plate Size : 300 mm Square Reading Loading Reading Unloading
Least Count of Pressure Gauge = 0.25 Tonne (Tonnes ) (mm) (kg / cm2) (Tonnes ) (mm)
Least Count of Deflectometer = 0.01 mm 0.0 0 93.6 12.0 13.275
1.0 0.5 78.0 10.0 12.975
Maximum Load ( On Jack ) = 50 MT 2.0 0.975 62.4 8.0 12.945
Maximum Load ( On Plate ) = 12 MT 3.0 1.5 46.8 6.0 12.84
Date of Tesing : 4/11/2001 4.0 2.45 31.2 4.0 12.615
Test Stratum : Soft Murrum 5.0 3 15.6 2.0 12.255
6.0 3.56 0.0 0.0 10.735
7.0 4
8.0 4.75
9.0 5
10.0 6.4

Load Vs. Settlement Load ( Tonnes )


0 1 2 3 4 5 6 7 8 9 10 11 12
0

3
Loadi
Settlement

4
ng
(mm)

5
Curve
6 Unloa
7 ding
8 Curve
9

10

11

12

13
Plate Load Test Report Pressure Total Gross Pressure Total Gross
Plate Load Test : PLT 1 Gauge Load Settlement Gauge Load Settlement
Plate Size : 300 mm Square Reading Loading Reading Unloading
Least Count of Pressure Gauge = 5 kg / cm2 kg / cm2 ) (Tonnes ) (mm) (kg / cm2) (Tonnes ) (mm)
Least Count of Deflectometer = 0.01 mm 0.0 0.0 0 78 10 4.035
Ram Diameter : 12.70 cm 7.8 1.0 1.25 52 6.66 3.47
Maximum Load ( On Jack ) = 50 MT 15.6 2.0 1.64 26 3.33 3.27
Maximum Load ( On Plate ) = 9 MT 23.4 3.0 2.04 0 0 1.965
Date of Tesing : 4/4/2001 31.2 4.0 2.62
Test Stratum : Hard Murrum 39.0 5.0 2.81
46.8 6.0 2.78
54.6 7.0 3.025
62.4 8.0 3.345
70.2 9.0 3.38
78.0 10.0 4.035

Load Vs. Settlement


Load ( Tonnes )

0 1 2 3 4 5 6 7 8 9 10
0

0.5

1
Settlement

1.5 Loadin
(mm)

g
2 Curve
2.5 Unload
ing
3 Curve

3.5

4.5

You might also like