Scribd
Upload
332 views1 page

Miter Bend Design Calculation

This document contains calculations for designing a miter bend pipe fitting. It provides formulas for calculating the cut back length, end miter value, and middle miter value based on inputs like the pipe radius, bend angle, thickness, radius of curvature, and number of segments. The output shows the radius of curvature, number of side and middle pieces, and end and middle miter angles calculated using the given inputs of a 24 degree bend angle with a 750mm pipe radius.

Uploaded by

Nischal Pokharel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
332 views1 page

Miter Bend Design Calculation

This document contains calculations for designing a miter bend pipe fitting. It provides formulas for calculating the cut back length, end miter value, and middle miter value based on inputs like the pipe radius, bend angle, thickness, radius of curvature, and number of segments. The output shows the radius of curvature, number of side and middle pieces, and end and middle miter angles calculated using the given inputs of a 24 degree bend angle with a 750mm pipe radius.

Uploaded by

Nischal Pokharel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Miter Bend Design Calculation

Deg. Cut Back (c) End Miter value(En) = Middle Miter Value(Mn)
Divisions =[r+t/2]*[1+cos(d)]*Tanβ1 c+ (R-r-t/2)*tanb1 =2*En

0 79.14 E1= 432.63 M1= 865.25


Input 30 73.83 E2= 427.33 M2= 854.65
Enter Radius of Pipe (r )= 750 mm 60 59.35 E3= 412.84 M3= 825.68
Enter Miter Bend Angle(f ) 24 Deg 90 39.57 E4= 393.06 M4= 786.12
Enter Thickness of Pipe(t)= 10 mm 120 19.78 E5= 373.27 M5= 746.55
Enter factor for Radius of Curvature(R)= 5 D 150 5.30 E6= 358.79 M6= 717.58
Enter Number of Segments(N)= 5 parts 180 0.00 E7= 353.49 M7= 706.98
Output 210 5.30 E8= 358.79 M8= 717.58
Radius of Curvature 7500 mm 240 19.78 E9= 373.27 M9= 746.55
No. of side Piece 2 part 270 39.57 E10= 393.06 M10= 786.12
No. of Middle Piece 3 part 300 59.35 E11= 412.84 M11= 825.68
End Miter Angle(b 1) 3 Deg 330 73.83 E12= 427.33 M12= 854.65
Middle Miter Angle(b2) 6 Deg 360 79.14 E1= 432.63 M1= 865.25

You might also like