Scribd
Upload
111 views1 page

Miter Bend Design Calculation

The document provides calculations for designing a miter bend, including determining the radius of curvature, number of side and middle pieces, and end and middle miter angles based on inputs of the radius and thickness of the pipe, miter bend angle, and number of segments. It displays the cut back distance, end miter value, and middle miter value for divisions of the miter bend angle from 0 to 360 degrees. The output provides the calculated radius of curvature, numbers of side and middle pieces, and end and middle miter angles.

Uploaded by

Nischal Pokharel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
111 views1 page

Miter Bend Design Calculation

The document provides calculations for designing a miter bend, including determining the radius of curvature, number of side and middle pieces, and end and middle miter angles based on inputs of the radius and thickness of the pipe, miter bend angle, and number of segments. It displays the cut back distance, end miter value, and middle miter value for divisions of the miter bend angle from 0 to 360 degrees. The output provides the calculated radius of curvature, numbers of side and middle pieces, and end and middle miter angles.

Uploaded by

Nischal Pokharel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Miter Bend Design Calculation

Deg. Cut Back (c) End Miter value(En) = Middle Miter Value(Mn)
Divisions =(r+rcos(d))*Tanf c+ (R-r-t/2)*tanb1 =2*En

0 170.86 E1= 595.08 M1= 1190.16


Input 30 159.41 E2= 583.64 M2= 1167.27
Enter Radius of Pipe (r )= 1050 mm 60 128.14 E3= 552.37 M3= 1104.73
Enter Miter Bend Angle(f) 37 Deg 90 85.43 E4= 509.65 M4= 1019.31
Enter Thickness of Pipe(t)= 12 mm 120 42.71 E5= 466.94 M5= 933.88
Enter factor for Radius of Curvature(R)= 3 D 150 11.45 E6= 435.67 M6= 871.34
Enter Number of Segments(N)= 5 parts 180 0.00 E7= 424.23 M7= 848.45
Output 210 11.45 E8= 435.67 M8= 871.34
Radius of Curvature 6300 mm 240 42.71 E9= 466.94 M9= 933.88
No. of side Piece 2 part 270 85.43 E10= 509.65 M10= 1019.31
No. of Middle Piece 3 part 300 128.14 E11= 552.37 M11= 1104.73
End Miter Angle(b 1) 4.625 Deg 330 159.41 E12= 583.64 M12= 1167.27
Middle Miter Angle(b2) 9.25 Deg 360 170.86 E1= 595.08 M1= 1190.16

You might also like