Scribd Logo
Upload

Welcome to Scribd!

  • 9 views

    Connect As Below:: Serial Suite: ECU Plug

    Uploaded by

    rumellemur59
    The document provides instructions for connecting a serial suite to an ECU plug and reading and writing the ECU. It specifies to connect the red wire to the 2 pin red port for power and the black wire to the 1 pin black port for ground. It also notes where to connect the flat cable and to add a bridge wire for writing to the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Connect As Below:: Serial Suite: ECU Plug

    Uploaded by

    rumellemur59
    9 views4 pages
    The document provides instructions for connecting a serial suite to an ECU plug and reading and writing the ECU. It specifies to connect the red wire to the 2 pin red port for power and the black wire to the 1 pin black port for ground. It also notes where to connect the flat cable and to add a bridge wire for writing to the ECU.

    Original Description:

    Ecutuning

    Original Title

    Nissan_2plug_short_var2_micra

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for connecting a serial suite to an ECU plug and reading and writing the ECU. It specifies to connect the red wire to the 2 pin red port for power and the black wire to the 1 pin black port for ground. It also notes where to connect the flat cable and to add a bridge wire for writing to the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    9 views4 pages

    Connect As Below:: Serial Suite: ECU Plug

    Uploaded by

    rumellemur59
    The document provides instructions for connecting a serial suite to an ECU plug and reading and writing the ECU. It specifies to connect the red wire to the 2 pin red port for power and the black wire to the 1 pin black port for ground. It also notes where to connect the flat cable and to add a bridge wire for writing to the ECU.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 4

    Connect as below:

    Serial Suite: ECU Plug:

    Red to 2 Pins Red (Power Supply +12 Volt)


    Black to 1 Pins Black (Ground)

    Piasiniengineering [email protected] – http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298
    Where to connect the flat cable:

    Backside:

    Piasiniengineering [email protected] – http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298
    READ the ECU:

    Backside:

    Piasiniengineering [email protected] – http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298
    WRITE the ECU:

    For write the ECU put 1 wire(Bridge) like in the picture.

    Piasiniengineering [email protected] – http://www.piasiniengineering.it


    Tel: +39 0342 489060 - Fax: +39 0342 488298

    You might also like