COMPACT AND

POWERFUL WIRED
AND WIRELESS
EMBEDDED MODULES

DIGI CONNECT ME 9210

Ultra-compact high-performance embedded modules for M2M networking
combine on-chip security
The Digi Connect ME 9210 embedded module enables secure BLOCK DIAGRAM
wired and wireless networking. Built on Digi’s powerful
NS9210 ARM9 processor, the high-performance module allows DIGI CONNECT ME®
9210
customers to implement next generation network-enabled
RJ-45
products. Additionally, the RJ-45 form factor is pin compatible w/Integrated
Magnetics
with modules in the Digi Connect ME family.
The module can provide future application-specific interface
options through the programmable Flexible Interface Module
(FIM), while keeping the main serial port or other key peripheral
interfaces available. It is well-suited for more advanced core PHY
I2C SPI
module applications by supporting up to ten shared GPIOs,
Accelerator
Ethernet
10 /100

external IRQs and an extended set of peripheral interface

AES
MAC

options.
ARM
8 MB
The Digi Connect ME 9210 features the development and

JTAG
FLASH
operational benefits of Digi Remote Manager ®. This secure, DRPIC165X FIM ARM926EJ-S
75 MHz
highly-scalable platform seamlessly ties enterprise applications
and remote devices together. Using Digi Remote Manager, 16 MB Mem Power
customers can also easily configure, upgrade, monitor and SDRAM Ctrlr Mgmt UART GPIO

troubleshoot their device from a centralized location.

BENEFITS
– Integrated 10/100 Mbit Ethernet interface 20-Pin JTAG
Connector Connector
– Support for Digi Embedded Linux and Digi NET+OS
– Industrial operating temperature System-on-Module
– RJ-45 form factor compatible with Digi Connect ME
– On-chip hardware encryption engine
– Extended set of on-chip interfaces and signals
– Power management modes RELATED PRODUCTS
– Low-emission design (FCC Class B)

Digi Connect® ConnectCore® ConnectCard™ Digi XBee® Development

ME 9P 9215 for i.MX28 Kits
DIGI JUMPSTART KIT® OVERVIEW
DIGI JUMPSTART KIT® FOR NET+OS DIGI JUMPSTART KIT® FOR EMBEDDED LINUX

This royalty-free turnkey solution for embedded software development is based Built around a standard Linux 2.6 kernel distribution, the Digi JumpStart Kit for Embedded
on the ThreadX Real-Time Operating System (RTOS), one of the most reliable and Linux is tailored to the specific needs of embedded Linux development and provides
field-proven RTOS solutions available. In addition to ThreadX, NET+OS® provides an easy-to-use, complete off-the-shelf embedded development platform. It includes all
the integrated building blocks needed to create product solutions with leading components that are required to build secure network-enabled products based on the Digi
network security using Digi embedded modules and microprocessors. Connect ME 9210 family.

For professional NET+OS software development, the Eclipse based Digi ESP™ The kit includes Digi ESP™ for Embedded Linux, a powerful and fully Linux-hosted
Integrated Development Environment (IDE) with graphical user interface and Integrated Development Environment based on the open Eclipse™ framework. Ideal for
high-speed USB 2.0 hardware debugger is provided out-of-the-box. new and experienced Linux developers, Digi ESP improves software design productivity
by accelerating and greatly simplifying driver and application development through a
• Royalty-free turnkey solution for embedded software development user-friendly graphical interface.
• Built on field-proven and compact ThreadX RTOS
• Fully integrated support for secure, IPv4/IPv6 networking applications • Off-the-shelf development platform for network-enabled embedded systems
• Professional software development using Windows-based Digi ESP IDE • Royalty-free and with optimized 2.6 kernel and services support
• Linux Digi ESP IDE for accelerated software development
• Full Linux and Digi BSP source code included

SOFTWARE PLATFORM NET+OS® EMBEDDED LINUX

MODULE Digi Connect ME 9210 w/ 8 MB Flash, 16 MB SDRAM

1 RS-232 serial port, GPIO configuration switches, screw terminal for GPIO signals, prototyping area, status LEDs
DEVELOPMENT BOARD (serial, GPIO, power), logic signal header, test points, reset button, user/wake-up buttons, PoE module header,
9-30 VDC power supply, JTAG header and RS-232 console/debug port for JTAG-equipped modules

Digi Embedded Linux 4 DVD:

Digi NET+OS CD:
Digi Embedded Linux, Digi ESP IDE, Linux and platform
CD/DVD NET+OS 7, Digi ESP IDE, BSP source code, sample code,
specific source code, Universal boot loader source code
Green Hills MULTI IDE support files, user documentation
(U-Boot), sample code, documentation

Quick start guide, Digi ESP tutorial, NET+OS porting guide,

Quick start guide, Digi Embedded Linux user’s guide, hard-
DOCUMENTATION NET+OS API documentation, Advanced Web Server, hardware
ware reference manual, development board schematics
reference manual, development board schematics

External wall power supply (110/240 VAC) with interchangeable outlet adapters
POWER SUPPLIES AND ACCESSORIES (North America, EU, UK, and Australia), crossover serial cable, Ethernet cable

OTHER Digi JTAG Link USB 2.0 hardware debugger N/A

Please refer to the feature specs on our website for detailed information about the specific software platform capabilities.

WWW.DIGI.COM
 SPECIFICATIONS Digi Connect ME® 9210
HARDWARE

PROCESSOR TYPE 32-bit Digi NS9210 processor

ARM CORE ARM926EJ-S

PROCESSOR SPEED 75 MHz

CACHE 4k I/D Cache

MEMORY BASE POPULATION Support up to 8 MB NOR Flash; Support up to 16 MB SDRAM

FLEXIBLE INTERFACE MODULES (FIMS) 300 MHz DRPIC165X CPU; 2k program/192 bytes data RAM
ON-CHIP 256-BIT AES ACCELERATOR Yes
POWER MANAGEMENT MODES On-the-fly clock scaling; Low-power sleep modes; Configurable scaling/wake-up events (EIRQ, UART, Ethernet, etc.)

PINS/FORM FACTOR RJ-45 connector style with 20-pin micro pin header (Samtec FTS-110-01-F-DV-TR)

HIGH-SPEED TTL SERIAL INTERFACE Full signal support (TXD, RXD, RTS, CTS, DTR, DSR and DCD); Hardware/Software flow control

GPIO 10 shared; Up to 3 external IRQ options

SPI Master data rate up to 16.7 Mbps; Slave data rate up to 7.5 Mbps

IC
2 v1.0 bus interface; 7-bit and 10-bit address modes
FLEXIBLE INTERFACE SUPPORT (FIM) UART, 1-Wire, USB device (low-speed), CAN BUS
WATCHDOG TIMER (16-BIT) Yes
JTAG INTERFACE Available on development modules only
ON-BOARD POWER SUPERVISOR Yes

WAVE-SOLDERABLE DESIGN No clean flux process

DIMENSIONS (L X W X H) 1.445 in (36.7 mm) x 0.75 in (19.05 mm) x 0.735 in (18.67 mm)
NETWORK INTERFACE - WIRED
PHYSICAL LAYER 10/100Base-T
DATA RATE 10/100 Mbps (auto-sensing)

MODE Full- or half-duplex (auto-sensing)

CONNECTOR RJ-45 w/ magnetics

POE POWER PASS-THROUGH 802.3af compliant (Mid- and End-span)

ENVIRONMENTAL

OPERATING TEMPERATURE -40° C to +75° C (-40° F to +167° F) -40° C to +85° C (-40° F to +185° F) with external thermal pad*

STORAGE TEMPERATURE -50° C to +125° C (-58° F to +257° F)

RELATIVE HUMIDITY 5% to 90% (non-condensing)

POWER REQUIREMENTS (3.3 VDC)

MAXIMUM 450 mA (1.485 W)

346 mA (1.14 W)
TYPICAL UART and Ethernet activated
IDLE 186 mA (613 mW)/16 clock scaling, Ethernet activated

SLEEP 3.3 VDC @ 34 mA (113 mW)

WARRANTY
PRODUCT WARRANTY 3 years

*Please see hardware reference manual for detailed information

WWW.DIGI.COM
 SPECIFICATIONS Digi Connect ME® 9210
REGULATORY APPROVALS
FCC PART 15 CLASS B, EN 55022 CLASS B Yes
EN 61000-3-2 AND EN 61000-3-3 Yes
ICES-003 CLASS B, VCCI CLASS II, AS 3548 Yes
FCC PART 15 SUB C SECTION 15.247 Yes
IC RSS-210 ISSUE 5 SECTION 6.2.2(O) Yes
EN 300 328, EN 301 489-17 Yes
UL 60950-1, EN 60950 (EU) Yes
CSA C22.2, NO. 60950 Yes
EN 55024 Yes
INTENTIONAL RADIATION Yes

MODULE PINOUT RECOMMENDED PCB LAYOUT

PIN UART GPIO EXT IRQ I2C SPI FIM OTHER
1 VETH+

2 VETH-

3-6 Positions removed

7 RxD GPIO[3] IN PIC[3]

Timer Out 7
8 TxD GPIO[7] OUT Timer In 8
9 RTS GPIO[5] 3 CLK Timer Out 6

10 DTR GPIO[6] Timer In 7

11 CTS GPIO[1] 0 PIC[1]

12 DSR GPIO[2] 1 PIC[2]

13 DCD GPIO[0] EN PIC[0]

14 /RST

15 3.3V

16 GND

17 GPIO[12] SDA CLK RESET_DONE

18 GPIO[9] 0 SCL

19 Reserved
INIT
20 GPIO[13] CLK Timer Out 9

PART NUMBERS DESCRIPTION

DIGI JUMPSTART KITS
DC-ME-9210-LX Digi Connect ME 9210 Digi JumpStart Kit for Digi Embedded Linux
DC-ME-9210-NET Digi Connect ME 9210 Digi JumpStart Kit for NET+OS 7
DIGI CONNECT ME MODULES
DC-ME-Y402-S Digi Connect ME 9210 w/4 MB Flash, 8 MB RAM (single-unit pack)
DC-ME-Y402-LX Digi Connect ME 9210 w/4 MB Flash, 8 MB RAM (single-unit pack)
DC-ME-Y413-LX Digi Connect ME 9210 w/16MB SDRAM, 8 MB Flash, for Digi Embedded Linux, Single Pack
DC-ME-Y401-C Digi Connect ME 9210 w/2 MB Flash, 8 MB RAM (single-unit pack)
DC-ME-Y402-C Digi Connect ME 9210 w/4 MB Flash, 8 MB RAM (single-unit pack)

DIGI SERVICE AND SUPPORT / You can purchase with confidence knowing that Digi DIGI INTERNATIONAL WORLDWIDE HQ DIGI INTERNATIONAL SINGAPORE
is always available to serve you with expert technical support and our industry 877-912-3444 / 952-912-3444 / www.digi.com +65-6213-5380
leading warranty. For detailed information visit www.digi.com/support.
DIGI INTERNATIONAL GERMANY DIGI INTERNATIONAL CHINA
© 1996-2020 Digi International Inc. All rights reserved. +49-89-540-428-0 +86-21-50492199 / www.digi.com.cn
All trademarks are the property of their respective owners.
91001478 DIGI INTERNATIONAL JAPAN
F8/120 +81-3-5428-0261 / www.digi-intl.co.jp
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

DIGI:
DC-ME-Y401-C DC-ME-9210-NET DC-ME-9210-LX DC-ME-Y402-C DC-ME-Y402-LX DC-ME-Y402-C-B DC-ME-
Y402-LX-B DC-ME-Y402-JT DC-ME-Y413-LX DC-WME-9210-LX DC-WME-9210-NET DC-WME-Y402-C DC-WME-
Y413-C DC-WME-Y413-C-B DC-WME-Y413-LX DC-ME-Y413-LX-B DC-ME-Y402-LX-JT DC-ME-Y402-S-B DC-ME-
Y402-NC DC-ME-Y402-S DC-ME-Y413-C DC-ME-Y413-C-B DC-ME-Y402-MF-B DC-ME-Y402-S-UPW DC-ME-
Y402-MF-VS DC-ME-Y402-MF DC-ME-Y402-NC-B