0% found this document useful (0 votes)

54 views6 pages

Ensto Voltage Controller: Answer For Today S Power Quality Problems

The document describes the Ensto Voltage Controller, a single-phase voltage controller that measures and adjusts existing line voltage continuously. It is installed close to consumer interfaces to stepwise increase or decrease the voltage from -10% to +15% of the local measurement. The unit is compact at 35 kg, 400x600x350 mm, and provides overvoltage protection, fast response time of 300ms, high efficiency over 98.5%, and safe, isolated operation without grounding needed. It helps solve power quality problems by bringing voltage levels back within operating ranges.

Uploaded by

TBS Máy Phát Điện

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

54 views6 pages

Ensto Voltage Controller: Answer For Today S Power Quality Problems

Uploaded by

TBS Máy Phát Điện

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 6

Ensto Voltage Controller

Answer for today´s

power quality problems

om
c
o.
st
en

Ensto Voltage Controller is a single-phase solution which

measures and adjusts the existing line voltage continuously.
Voltage Controller for
low voltage distribution grids
Product Description
VC6K-1P-000 is a single-phase voltage controller for low voltage distribution grids. It
is installed close to consumer interface, where it measures the feeding line voltage
and stepwise adjusts the output voltage. The unit is able to increase and decrease
the line voltage level. The output control range is -10% - +15% and the voltage in-
crease/decrease function is selected automatically based on the locally measured
voltage. The boosting function is active, while the input voltage is in the range of
160-260V.

The boosting function is active, while the input voltage is in the range
of 160-260V.
Output, V

270

250 Without Voltage Controller

With Voltage Controller

230 Un +10 %
Un +5 %

210 Un
Un -5 %

190 Un -10 %

170

150 Input, V
160 170 180 190 200 210 220 230 240 250 260 270
Product benefits

FAST COMPACT
Quick to install Small size: W= 400 mm,
no special skills needed H= 600 mm and D= 350 mm
Quick to take in use Light-weight, less than 35 kg
no setting or calibration High efficiency
Double-isolated - no need for grounding

PROTECTION SAFE
Voltage Controller is protected Air-cooled, no need for oil
by a miniature circuit breaker. Ecological materials
The temperature of electronics and Fully recyclable
autotransformers is monitored. Simple connections with
In case of overheat the protective Ensto Clampo Pro terminals
bypass mode is activated. Cross-section 10-50 mm2
Unit has IP44 protection level,
hot air is exhausted through the
ventilation.
Product information

Feature VC6K-1P-000

Nominal power (kVA) 6

Nominal current (A) 25

Max input curren (A) 28

Network 1-phasig

Reaction time (ms) 300

No-load loss <5W

Efficiency (%) > 98,5 %

Weight (kg) 35

Size W x H x D (mm) 400 x 600 x 350

+5 %  +10 %  +15 %
Boosting levels
-5 %  -10 %
Casing UV-resistant composite, RAL7035
Recommended accessories
Band and buckle for band hooks
COT36 6418677412189 for band COT37
19 mm x 0.75 mm x 25 m,
COT37 6418677412196
AISI201

Special tools
CT42 6418677412332 Used for steel band COT37

Surge arrester
Al 10-95 mm2 or Cu 1.5-70 mm2
SE46.328-10 6418677432774
surge arrester SGA328-10
10-150 mm2, 280 V / 10 kA,
SE45.328-10 6418677432767
SGA328-10