A114521R1v06

D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-3800)-8x65-
14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R
EasyRET 22-port 2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with Integrated
RCUs - 1.5m
Antenna Specifications

Electrical Properties
2 x (690 - 960) (Lr1 / Rr2)
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45° , -45°
Electrical downtilt (°) 0 - 14 , continuously adjustable, each band separately
at mid Tilt 13.5 13.8 14.0 14.1
Gain (dBi)
over all Tilts 13.5 ±0.5 13.7 ±0.5 13.9 ±0.5 14.0 ±0.5
Side lobe suppression for first side
> 15 > 15 > 15 > 15
lobe above main beam (dB)

Horizontal 3dB beam width (°) 69 ±7 68 ±6 68 ±6 67 ±6

Vertical 3dB beam width (°) 14.9 ±1.4 13.5 ±1.3 12.8 ±1.2 12.2 ±1.1
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio , ±30° (dB) > 20 > 21 > 22 > 22
Cross polar ratio (dB) 0° > 17 > 18 > 18 > 18
Max. power per input (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

Electrical Properties
2 x (1427 - 2200) (Lb1 / Rb2)
Frequency range (MHz) 2 x (2490 - 2690) (Ly1 / Ry3)
1427 - 1518 1695 - 1990 1920 - 2200
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable
at mid Tilt 15.4 16.5 16.8 17.1
Gain (dBi)
over all Tilts 15.2 ±0.6 16.4 ±0.5 16.7 ±0.5 17.0 ±0.5
Side lobe suppression for first side lobe
> 15 > 16 > 16 > 16
above main beam (dB)
Horizontal 3dB beam width (°) 69 ±7 62 ±6 60 ±6 58 ±5
Vertical 3dB beam width (°) 9.1 ±0.8 7.5 ±0.7 6.8 ±0.6 5.3 ±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio , ±30° (dB) > 23 > 26 > 25 > 24
Cross polar ratio (dB) 0° > 17 > 18 > 18 > 17
Max. power per input (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

1
 A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-3800)-8x65-
14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R
EasyRET 22-port 2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with Integrated
RCUs - 1.5m

Electrical Properties
1695 - 2690(Cy2)
Frequency range (MHz)
1695 - 1990 1920 - 2200 2200 - 2490 2490 - 2690
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable
at mid Tilt 16.6 17.0 17.1 17.4
Gain (dBi)
over all Tilts 16.5 ±0.5 16.9 ±0.5 17.0 ±0.6 17.3 ±0.6
Side lobe suppression for first side lobe
> 15 > 16 > 16 > 15
above main beam (dB)
Horizontal 3dB beam width (°) 66 ±6 61 ±6 60 ±6 58 ±6
Vertical 3dB beam width (°) 7.2 ±0.6 6.5 ±0.6 5.7 ±0.5 5.2 ±0.5
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio , ±30° (dB) > 26 > 26 > 26 > 25
Cross polar ratio (dB) 0° > 18 > 18 > 18 > 18
Max. power per input (W) 250 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground

1. Values based on NGMN recommendations on Base Station Antenna Standards (BASTA).

2. Electrical datasheet in XML format is available.

General Electrical Properties

Frequency range (MHz) 3300 - 3800 (p1)
Polarization +45° , -45°

Electrical downtilt (°) 2 - 12, continuously adjustable

General
parameters Electrical downtilt tolerance (°) ±1
Avg. power capacity (W)* 40
Impedance (Ω) 50
Grounding DC Ground

Coupling factor between calibration port and each antenna port (dB) -26 ±2

Max. amplitude tolerance from calibration port to input ports (dB) 0.9
Calibration and
electrical Max. phase tolerance from calibration port to input ports (°) 7
parameters Ports VSWR 1.5
Co-polarization isolation between ports (dB) ≥ 20
Cross-polarization isolation between ports (dB) ≥ 23

* Total power : 800 W (at 50℃ ambient temperature)

2
 A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-3800)-8x65-
14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R
EasyRET 22-port 2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with Integrated
RCUs - 1.5m

TDD LTE Electrical Properties

Frequency range (MHz) 3300 - 3800 (p1)
Gain (dBi) 15.6
Horizontal 3dB beam width (°) 70
Front to back ratio (dB) ≥ 24
Single column
beam Cross polar ratio (0°) (dB) ≥ 15
Vertical 3dB beam width (°) 5.5

Side lobe suppression for first side lobe above main beam (dB) ≥ 15

Gain (dBi) 16.9

Radiation
Horizontal 3dB beam width (°) 65
parameters
Front to back ratio (dB) ≥ 25
65° Broadcast
beam Cross polar ratio (0°) (dB) ≥ 15
Vertical 3dB beam width (°) 5.5

Side lobe suppression for first side lobe above main beam (dB) ≥ 15

0°direct beam gain (dBi) 20.7

0°direction beam horizontal 3dB beam width (°) 21
Service beam
0°direction beam front to back ratio (dB) ≥ 30
0°direction beam cross polar ratio (dB) ≥ 19

Notes：
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.

5G NR Electrical Properties
Frequency range (MHz) 3300 - 3800 (p1)
Gain (dBi) 15.6
Horizontal 3dB beam width (°) 70
Front to back ratio (dB) ≥ 24
Single column beam Cross polar ratio (0°) (dB) ≥ 15
Vertical 3dB beam width (°) 5.5

Side lobe suppression for first side lobe above main beam (dB) ≥ 15

Radiation Gain (dBi) 20.7

parameters Horizontal 3dB beam width (°) 65
NR Broadcast beam
(PBCH/PSCH/SSCH with Front to back ratio (dB) ≥ 25
HUAWEI gNodeB) Vertical 3dB beam width (°) 5.5
Side lobe suppression for first side lobe above main
≥ 15
beam (dB)
0°direct beam gain (dBi) 20.7
0°direction beam horizontal 3dB beam width (°) 21
NR Service beam
0°direction beam front to back ratio (dB) 30
0°direction beam cross polar ratio (0°) (dB) 19

Notes：
1. The 5G NR broadcast beam is the envelope of SSB(synchronization signal block) sweeping beams and the gain is the maximum
gain of SSB sweeping beams.
2. Downlink broadcast beam gain values and pattern files can only be used for broadcast channel coverage prediction.
3. Downlink and uplink budgets need to be calculated based on the gain of single column beam and the correct Tx/Rx number.

3
 A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-3800)-8x65-
14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R
EasyRET 22-port 2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with Integrated
RCUs - 1.5m

Mechanical Properties
Antenna dimensions (H x W x D) (mm) 1509 x 499 x 206 106

Packing dimensions (H x W x D) (mm) 1770 x 555 x 245

Antenna weight (kg) 38.0

85
Clamps weight (kg) 5.8 (2 units)
Antenna packing weight (kg) 49.0 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey

1365
1509
Operational temperature (℃) -40 .. +65
Frontal: 540 (at 150 km/h)
Wind load (N) Lateral: 270 (at 150 km/h)
Maximum: 705 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250

59
14 x 4.3-10 Female
Connector
1 x MQ4 Male + 1 x MQ5 Male
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Downtilt kit ASMDT0F01 Mechanical downtilt: 0 - 16 ° 3.1 kg 1 (Separate packing)

RET S/N:

HWMxxx……Lr1
HWMxxx……Lb1
HWMxxx……Ly1

h HWMxxx……Cy2
Cy2
HWMxxx……Ry3
Lb1 Ly1 Rb2 Ry3
g HWMxxx……Rb2
g HWMxxx……Rr2
p1 p1 p1 p1
h HWMxxx……..p1
r - Red y - Yellow b - Blue p - Purple
L - Left array R - Right array C - Center array RAE S/N:
Lr1 Rr2

h HWXxxx……..p1

Notes：
Before installing the antenna, it is recommended to plan the use of antenna connectors based on frequency bands in use
currently and in the future. This is to avoid adjusting antenna connector configuration when new frequency bands are deployed.

4
 A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-3800)-8x65-
14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R
EasyRET 22-port 2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with Integrated
RCUs - 1.5m

Antenna Information Management Module (AIMM) Specifications

RET Properties
RET type Integrated RET
RET protocols AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 1.5 (when the motor does not work, 12 V)
Power consumption (W) < 6 (when the motor is working, 12 V)
< 10 (when the motor is starting up or shutting down, 12 V)
Adjustment time (full range) (s) Typ. 40
4 x 8 pin connector according to IEC 60130-9
Connectors
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
Lightning protection (kA) 10 (8/20 μs)

RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE V2.1.0

TDD LTE EasyBeam Properties

Frequency range (MHz) 3300 - 3800
Electrical downtilt (°) 2 - 12
Horizontal 3dB beam width (°) 30 65 90
Broadcast
Electrical azimuth (°) -15..+15 0
beam
Electrical azimuth step(°) 1 /

Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor),EN 55032 (Emission),
EN 55024 (Immunity), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE

Pattern sample for reference

690 - 960 MHz 1695 - 2690 MHz

(Lr1 / Rr2) (Cy2)

5
 A114521R1v06
D11X-2x(690-960)/2x(1427-2200)/2x(2490-2690)/1695-2690/4x(3300-3800)-8x65-
14.5i/14.5i/16i/16i/17i/17i/17i/21i-8xM-R
EasyRET 22-port 2L5H FDD/3.3-3.8GHz 8T8R TDD Antenna with Integrated
RCUs - 1.5m

1427 - 2200 MHz 2490 - 2690 MHz

(Lb1/Rb2) (Ly1/Ry3)

Single column 65° Broadcast

(3300 - 3800 MHz) (3300 - 3800 MHz)

Service 0° 5G NR Broadcast
(3300 - 3800 MHz) (3300 - 3800 MHz)
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
Any previous datasheet issues become invalid. 6 Issue: 2019-08-14