NEW HOIST

GENERATION
BORN
FROM
EXPERIENCE
 Over
60 years
of know-how

More than
100,000 hoists
installed
vouch for
our experience

2 Contents

GH started out in 1956, as a

manufacturer of lifting components.
Over 50 years We now operate in over 60
of experience… 2 countries, installing our products
and providing solutions for practi-
GHB11, cally all sectors.
the new hoist... 3 Our years of experience and our
customers' recognition of the high
quality of our products have placed
Adaptable,
GH among the leading European
modular design… 4/5
manufacturers in the lifting sector.

Safety and
reliability features… 6

A wide range
of solutions… 7

Energy-efficient… 8

Selection chart… 9

Technical service
and spares… 10

We operate
worldwide… 11
 We've
developed
a new hoist

1956 What do you want

INDUSTRIAS ELECTROMECANICAS GH, S.A. from a new machine?
Safety
1960 Reliability
Performance
Durability
Maintenance

1980

1990 Frequency inverter for cross travel

and hoist motions as standard.
Minimum duty service classification
ISO M5.
C-shaped design for better approa-
ches.
Reduced weight, transmitting less
stress to the structure.
2012
Complies with European Machine
2000 Directive 2006/42/EC.
Designed for higher productivity and
maintenance savings.
Quick connector on motors and
cabinets.
 An adaptable,
modular hoist

Modular design,
easily adaptable
to different
wire rope
arrangements
and girder widths

The new GHB11 hoist's modular

design enables much of the
structure to be used for assembling 4/1 reeving configuration
the different hoist configurations,
different rope arrangements (4/1,
2/1, 4/2, etc.), drum lengths or
installing a second motor.

This design makes GH's new hoist

competitive and quick to manufac-
ture.

2/1 reeving configuration

 A robust,
reliable
range
of hoists

Specific
solutions
for each type
of work and
working
environment

Single-girder suspended hoist

Aeronautics 5
Shipbuilding
Automotive
Metal fabrication
Wind power
Railway
Casting
Container cranes
Steel handling
Stone handling
Boat handling
Public works
Paper mills
Precast concrete
Urban solid waste
Steel industry

Double-girder hoist with tubes

GH's products for all sectors are

designed with a view to offering our
customers the best performance at
the lowest cost, based on reliability,
safety, durability, affordability and
minimum maintenance.

Double-girder hoist with end carriages

 Speed
control
by frequency
inverter,
for higher 5m/min 8m/min 25% of the load
productivity

Features Safety Reliability

Speed selection. Frequency inverter for cross travel and hoist All components are highly robust.
motions as standard.
Smooth running. Acceleration/dece- Longer working life of all compo-
leration control to prevent dange- Wire rope safety factor as per EC directive nents.
rous swing. (Min 5).
New materials for longer machine
Electric braking, allowing the service Two steps limit switch for lifting. working life.
brake to work as a safety brake in
Safe Operating Period Control. Modular design.
practice.
Load swing control. Lower machine downtime costs.
More durable mechanisms.
Operating and maintenance control. Lower maintenance costs during the
Compact design for the closest
hoist's working life.
approaches, making efficient use of Load slip safety system.
available space.
6 Optional loose wire rope indication.
Light weight, with no counterweight,
Phase reversal/phase loss protection.
reducing stress to the structure.
Motor overheating protection.
Energy savings.
Overload limiter.

Reliable load clamping with safety Latch.

No counterweights
- Lower moments of inertia.
Cross travel motor
- GH's own optimised design.
- Speed regulation by frequency
inverter.
- Direct drive, with two wheels on
each side of the girder.
Hoisting motor
- GH's own optimised design.
- Encoder safety.
- IP-55 protection as per DIN
40050.
- Duty cycle 60% ED.
Helical gears
- Smooth running.
- Excellent lubrication.
- All gears in closed housing with
oil bath.
Wire rope guide
- Latest-generation materials.
- Longer wire rope life with less
wear.
 State-of-
the-art
595 mm technology,
adapted to
320 mm the customer's
needs

Load control Hoist versions

All our hoists come equipped with We adapt the features of our products to
the model ALE-100/TN electronic meet our customers' needs.
limiter, with record and control
- Hoist for curves.
function. Designed for overload,
loose wire rope and motor overhea- - Cradled double-girder trolley.
ting control. also records the load - Hoist with console trolley.
spectrum of the hoist as per UNE 58
- Motorised rotary trolley.
919 standard.
- Dual hoist double-girder trolley.
In combination with the overload cell,
it enables optional viewing of - Dual hook double-girder trolley.
hanged load and Safe Operating - Trolley with hoist parallel to end
Period control: carriages.
- Double-girder tube trolley with platform. 7
- Number of lifting manoeuvres.
- Number of inching manoeuvres. - Winder trolley.

- Lifting manoeuvre time. - Hoist between girders.

- Number of overloads. - Recess-mounted double-girder trolley

with 2 cable exits and rack conveying.
- Number of trolley manoeuvres.
- Number of bridge manoeuvres.
- Activation of next inspection Other options
alert by number of hours and/or - Anti- collision photocells.
date.
- Weighing display.
This data can be viewed on the
remote control. - Safety brake on drum.
- Hook blocking system.
- Remote control.
- Data displayed on remote control.
- Data displayed on radio remote control.

Frequency
inverter for
hoist and
cross travel
Electronic load limit device (ALE-100/TN) Radio remote control with display (on the radio) motions
 Machines
with energy
efficiency
and optimised
design

We have used GH's smartphone application provides

information on the Safe Operating Period
state-of-the-art for all its cranes installed worldwide.
technology to
The following information can also be
improve all accessed optionally, in conjunction with
aspects of this ALM100N:

new hoist - Number and duration of hoisting ope-

rations.

- Number of manoeuvres.

- Record of the last 500 overloads and

maintenance alert activation.

Energy savings and environmental

protection have become a major
issue in today's engineering systems

GH's solution in this area centres on

the use of regenerative frequency
inverters. These have major advan-
tages over conventional frequency
inverters:

- High energy efficiency.

- No braking resistance required.

- Minimal heat generation on

braking.

- Huge energy saving potential.

Braking energy feedback can also

be used elsewhere in the installa-
tion, reducing operating costs even
further. Scroll screen
to view
This technology is especially suited
heavy duty cranes with cyclical
processes.
 A wide
range is
available

Standard: Frequency inverter on hoisting B11 R 06 41 04 H2 M5

Models GHA12, GHB11 and GHD13 FEM duty (M5 - M8)
- Nominal speed at full load 5m/min.
Lifting height (H1 - H5)
- Overspeed at 1/4 load 8m/min.
Lifting speed (4 m/min = 04)
Optional: 2-speed motor
Reeving arrangement (2/1, 4/1, 4/2, etc.)
Hoisting speed
Hoist capacity (e.g. 3.2 t = 03; 10 t = 10)
- 5/0.8 m/min. GHB11, GHD13
Hoisting speed Hoist type. Execution (N: Single girder normal headroom, R: Single girder
low headroom; B: Double girder with tubes; F: Fixed; T: with end carriages)
- 5/1.25 m/min. GHA12
Hoist type. Size (A, B, D). Version.
Other options available.

kg. Hoist Speed Falls Duty HOL (Height Of Lift) (m) kg. Hoist Speed Falls Duty HOL (Height Of Lift) (m) 9
m/min FEM H1 H2 H3 H4 m/min FEM H1 H2 H3 H4
GHA12_014105M7 5 4/1 M7 4.5 8 10.8 GHA12_034105M5 5 4/1 M5 4.5 8 10.5
GHA12_012110M6 10 2/1 M6 9 16 21.6 GHB11_034105M7 5 4/1 M7 3.6 6.8 10
GHB11_011116M7 16 1/1 M7 14.5 27.1 37.2 47.3
1.000 GHB11_032108M5 8 2/1 M5 7.26 13.55 18.6 23.6
GHB11_012216M7 16 2/2 M7 4 10.3 15.4 20.5
GHB11_034208M5 8 4/2 M5 5 7.5 10
GHB11_011120M6 20 1/1 M6 14.5 27.1 37.2 47.3 3.200
GHB11_012220M6 20 2/2 M6 4 10.3 15.4 20.5 GHD13_032110M7 10 2/1 M7 7.6 14.4 25.5

GHA12_014105M7 5 4/1 M7 4.5 8 10.8 GHD13_034210M7 10 4/2 M7 7 14.7

GHA12_012110M5 10 2/1 M5 9 16 21.6 GHD13_032216M5 16 2/2 M5 15.9 31

GHB11_012216M5 16 2/2 M5 10.3 15.4 20.5 GHD13_031116M5 16 1/1 M5 15.2 28.8 51
1.600
GHB11_011116M5 16 1/1 M5 14.5 27.1 37.2 47.3 GHB11_044104M7 4 4/1 M7 3.6 6.8 10
GHD13_012220M7 20 2/2 M7 15.9 31
GHB11_044105M6 5 4/1 M6 3.6 6.8 10
GHD13_011120M7 20 1/1 M7 15.2 28.8 51
GHD13_042108M7 8 2/1 M7 7.6 14.4 25.5
GHA12_024105M7 5 4/1 M7 4.5 8 10.8 4.000
GHD13_044208M7 8 4/2 M7 7 14.7
GHB11_022108M7 8 2/1 M7 7.26 13.55 18.6 23.6 GHD13_042110M6 10 2/1 M6 7.6 14.4 25.5
GHB11_024208M7 8 4/2 M7 5 7.5 10 GHD13_044210M6 10 4/2 M6 7 14.7
GHB11_022110M6 10 2/1 M6 7.26 13.55 18.6 23.6
GHB11_054104M6 4 4/1 M6 3.6 6.8 10
2.000 GHB11_024210M6 10 4/2 M6 5 7.5 10
GHB11_054105M5 5 4/1 M5 3.6 6.8 10
GHD13_022216M7 16 2/2 M7 15.9 31
GHD13_054105M7 5 4/1 M7 3.8 7.2 10
GHD13_021116M7 16 1/1 M7 15.2 28.8 51 5.000
GHD13_052108M6 8 2/1 M6 7.6 14.4 25.5
GHD13_022220M6 20 2/2 M6 15.9 31
GHD13_021120M6 20 1/1 M6 15.2 28.8 51 GHD13_054208M6 8 4/2 M6 7 14.7
GHD13_052110M5 10 2/1 M5 7.6 14.4 25.5
GHA12_024105M6 5 4/1 M6 4.5 8 10.8
GHD13_054210M5 10 4/2 M5 7 14.7
GHB11_022108M6 8 2/1 M6 7.26 13.55 18.6 23.6
GHB11_024208M6 8 4/2 M6 5 7.5 10 GHB11_064104M5 4 4/1 M5 3.6 6.8 10
GHB11_022110M5 10 2/1 M5 7.26 13.55 18.6 23.6 GHD13_064105M7 5 4/1 M7 3.8 7.2 10
6.300
GHB11_024210M5 10 4/2 M5 5 7.5 10 GHD13_062108M5 8 2/1 M5 7.6 14.4 25.5
2.500 GHD13_022110M7 10 2/1 M7 7.6 14.4 25.5 GHD13_064208M5 8 4/2 M5 7 14.7
GHD13_024210M7 10 4/2 M7 7 14.7 GHD13_084104M7 4 4/1 M7 3.8 7.2 10
GHD13_022216M6 16 2/2 M6 15.9 31 8.000
GHD13_084105M6 5 4/1 M6 3.8 7.2 10
GHD13_021116M6 16 1/1 M6 15.2 28.8 51
GHD13_104104M6 4 4/1 M6 3.8 7.2 10
GHD13_022220M5 20 2/2 M5 15.9 31 10.000
GHD13_104105M5 5 4/1 M5 3.8 7.2 10
GHD13_021120M5 20 1/1 M5 15.2 28.8 51
12.500 GHD13_124104M5 4 4/1 M5 3.8 7.2 10
Hoist selection chart
 Technical
assistance
service,
maintenance
and original
spare parts

We've designed
a state-of-the-art,
lightweight,
robust hoist
10 requiring
minimum
maintenance
GH spare parts distribution center

To guarantee perfect functioning

and durability of the units we offer an
all-round service, including After-
sales Service, Technical Assistance
and Spare Parts Supply:
- Preventive and predictive
maintenance.
- Corrective maintenance.
- We stock original replacement
parts.
- Crane operator training
courses.
 Presence in

FRANCE
POLAND
RUSSIA
73 COUNTRIES
ON 5 CONTINENTS
USA (IL) SPAIN
PORTUGAL

112.000
USA (TX)
CHINA

UAE
INDIA
MEXICO
sold cranes
THAILAND

COLOMBIA

PERU

BRAZIL
750
GH, SOLUTIONS
WORLDWIDE
IN THE

TOP 5 CRANE
MANUFACTURERS
WORLDWIDE

GH, Spain central offices www.ghcranes.com

Beasain Olaberria Alsasua Bakaiku Jaén

CENTRAL OFFICES
T: +34 943 805 660 T: +34 902 205 100 T: +34 948 467 625 T: +34 948 562 611 T: +34 902 205 100
[email protected] [email protected]

GH, subsidiaries in the world

Brazil Cabreúva China Shangai Colombia Bogotá France Couëron India Pune
GH DO BRASIL IND. E COM. LTDA. GH (SHANGHAI) GH COLOMBIA SAS GH FRANCE SA GH CRANES INDIA PVT. LTD.
T: +55 1144090066 LIFTING EQUIPMENT CO., LTD. T: +57 1 750 4427 T: +33(0) 240 861 212 T: +91 89561 35444
[email protected] T: +86 21 5988 7676 [email protected] [email protected] [email protected]
[email protected]

Mexico Queretaro Peru Lima Poland Kłobuck Portugal Mamede do Coronado Russia Moscow
GRÚAS GH MEXICO SA DE CV GH PERÚ S.A.C. GH CRANES SP. Z O.O. GH PORTUGAL GH RUSSIA
T: +52 44 22 77 55 03 T: +51 987816231 T: +48 34 359 73 17 T: +351 229 821 688 T: +7 (495) 745 69 26
+52 44 22 77 50 74 [email protected] [email protected] [email protected] [email protected]
[email protected]
anfora.net

Thailand Chonburi UAE Dubai USA Illinois USA Texas

LGH Cranes GH Cranes Arabia FZCO GH CRANES USA F&G CRANES
T: +66 (0) 2327 9399 Office no. 517, 5th Floor, Jafza T: (815) 277 5328 T: (972) 563 8333
2018.07

M: +66 (0) 8 4660 1365 Building 16, Jebal Ali Free Zone. [email protected] [email protected]
[email protected] P.O Box Number - 263594
T: +971 4 8810773
[email protected]
DESIGNED, BUILT AND
KEPT IN SHAPE BY OUR
TOP TEAMS

See the video on the new GHB11 hoist by scanning this QR

code, or online at:

http://www.youtube.com/user/ghcranes
anfora.net

TEL.: +34 943 805 660

FAX: +34 943 888 721
E-MAIL: [email protected]
05.2016

APDO. 27 - Bº SALBATORE
20200 BEASAIN (GIPUZKOA) - SPAIN
WWW.GHCRANES.COM