Scribd Logo
Upload

Welcome to Scribd!

  • 54 views

    Field Instrumentation & Control: Patron Clients of CRISP About CRISP

    Uploaded by

    Danish Alam
    CRISP is an autonomous organization established under an Indo-German agreement to provide technical training and consultancy. It has a head office in Bhopal and training centers in India and internationally. The document discusses CRISP's Field Instrumentation and Control course, which teaches participants to install, operate, and maintain instrumentation equipment used to measure and control process parameters like pressure, temperature, and flow. The 5-day hands-on course covers topics like sensors, transmitters, loop setup, calibration, and level measurement using techniques like ultrasonic and differential pressure.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Field Instrumentation & Control: Patron Clients of CRISP About CRISP

    Uploaded by

    Danish Alam
    54 views2 pages
    CRISP is an autonomous organization established under an Indo-German agreement to provide technical training and consultancy. It has a head office in Bhopal and training centers in India and internationally. The document discusses CRISP's Field Instrumentation and Control course, which teaches participants to install, operate, and maintain instrumentation equipment used to measure and control process parameters like pressure, temperature, and flow. The 5-day hands-on course covers topics like sensors, transmitters, loop setup, calibration, and level measurement using techniques like ultrasonic and differential pressure.

    Original Title

    Field_Instrumentation_&_Control

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    CRISP is an autonomous organization established under an Indo-German agreement to provide technical training and consultancy. It has a head office in Bhopal and training centers in India and internationally. The document discusses CRISP's Field Instrumentation and Control course, which teaches participants to install, operate, and maintain instrumentation equipment used to measure and control process parameters like pressure, temperature, and flow. The 5-day hands-on course covers topics like sensors, transmitters, loop setup, calibration, and level measurement using techniques like ultrasonic and differential pressure.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    54 views2 pages

    Field Instrumentation & Control: Patron Clients of CRISP About CRISP

    Uploaded by

    Danish Alam
    CRISP is an autonomous organization established under an Indo-German agreement to provide technical training and consultancy. It has a head office in Bhopal and training centers in India and internationally. The document discusses CRISP's Field Instrumentation and Control course, which teaches participants to install, operate, and maintain instrumentation equipment used to measure and control process parameters like pressure, temperature, and flow. The 5-day hands-on course covers topics like sensors, transmitters, loop setup, calibration, and level measurement using techniques like ultrasonic and differential pressure.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    About CRISP Patron Clients of CRISP

    CRISP is established under Indo-German


    Cooperation agreement as an autonomous
    organisation of the Dept. of Technical Education and
    Skill Development, Govt. of M.P.
    CRISP provides technical training and consultancy
    services for Industry Personnel, Government FIELD
    Officers, Faculties of academic and teaching
    institutions, Students and Jobseekers. CRISP is INSTRUMENTATION
    equipped with the state-of-the-art equipment and
    technology, latest software, qualified, trained and & CONTROL
    experienced trainers in the relevant fields.
    CRISP has its head office in Bhopal and training
    centres at several national and international
    locations.

    Other training programmes in Electrical and


    Electronics offered at CRISP are : sesa sterlite

     Embedded System Design


     Electronics Maintenance
    Contact :
     WinCC SCADA
     Industrial Automation Course Co-ordinator
     PLC Programming & Application Mr. Annapurna Nand Tiwari
     PLC Networking Mobile : 9893320613
     Electrical Control and Relay Logic Application email : [email protected]
     AC/DC Drive
     MMI
    Sr. Manager (Marketing)
     MATLAB
    Mr. Faisal Jafri
     Fiber Optic Networking Mobile : 9826334406
    email : [email protected]

    Centre for Research and


    Industrial Staff Performance
    (Established under Indo-German Technical Co-operation)
    Opp. Manas Bhawan, Shyamla Hills, Bhopal – 462 002 ...unleashing the full potential of men & machines
    Phone : +91 755 2661401, 4223702 Fax : 4220022
    www.crispindia.com TB 208/Issue 04
    Introduction of Course
     Configuration of Ultrasonic Level Transmitter
    FIELD INSTRUMENTATION Instrumentation is the art of measuring the value of and Loop power Indicator
    & CONTROL some plant parameter i.e. pressure, flow, level or
     Various flow measurement techniques, mag.
    temperature to name a few and supplying a signal
    that is proportional to the measured parameter. flow meter in detail, Control Valves and E/p
    The output signals are standard signal (4-20 mA) convertor
    and can then be processed by other equipment (PLC  Flow control feedback loop (Integrated
    or DCS) to provide indication, alarms or automatic Instrumentation Plant -forbes marshall )
    control.  Identify Instrument Symbols, draw Read and
    This course deals with the instrumentation Interpret basic P & ID
    equipment used to measure, regulate and/or  Instruments Interfacing
    control the process parameter.  Industrial applications and basic trouble-
    CRISP has setup state-of-art facilities to impart shooting
    training in this area. This lab is equipped with most
    modern analog and digital instruments including Methodology
    calibrators.
    The programme consists of a mix of :
    After completing this course the participants will be
     Lectures & presentations
    able to install, wire, configure, test, maintain and
     Demonstrations
    calibrate instruments.
     Interactive discussions
    Course Contents  Hands-on practice
     Introduction to field Instrumentation and control,
    Pre-requisite
    basic terms, Standard Instrumentation/Output
    signals and Instrument characteristics.  Industry personnel with relevant experience.
     Limit Switch, Reed Switch, Inductive, Capacitive,  Passouts or students pursuing Degree/ Diploma
    Optical Proximity Sensors, counters and ZSS in Electronics/ Electrical/ Instrumentation
    Engineering or equivalent.
    controller, sinking-sourcing concept, applications
     Temperature Switches and Sensors (RTD and Duration
    Thermocouple), temperature transmitter and
    controller Full time: 5 working days (7 hours/day)
     Pressure switches, sensors and Differential Part time: Three weeks (15 working days, 2 hours/day)
    Pressure Transmitter. Course Fee
     Basic 4-20 mA Loop Setup and Loop testing
    K i n d l y refe r to o u r t ra i n i n g ca l e n d a r at
     Calibration Introduction, Understanding
    Instrument's Specifications www.crispindia.com or can be obtaind from CRISP
     Calibration of field devices – Pressure and counselling desk
    temperature
     Hydrostatic and other Level detection Mode of Payment
    techniques, zero elevation & suppression Cash / Online/ Debit/ Credit Card

    You might also like