Scribd Logo
Upload

Welcome to Scribd!

  • 60 views

    B4 Engine Range B4AF40 Operation Datasheet

    Uploaded by

    Truong Nguyen
    This document provides specifications for a B4AF40 diesel engine intended for use in driving fire pumps. The 4-cylinder inline engine has a displacement of 4.5 liters and produces between 48-65 kW of power at speeds ranging from 1760-2600 rpm. The document outlines the engine's cooling, lubrication, electrical, fuel, air intake, and exhaust systems as well as performance data at different operating speeds. Safety features include alarms for low coolant temperature and high raw water temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    B4 Engine Range B4AF40 Operation Datasheet

    Uploaded by

    Truong Nguyen
    60 views3 pages
    This document provides specifications for a B4AF40 diesel engine intended for use in driving fire pumps. The 4-cylinder inline engine has a displacement of 4.5 liters and produces between 48-65 kW of power at speeds ranging from 1760-2600 rpm. The document outlines the engine's cooling, lubrication, electrical, fuel, air intake, and exhaust systems as well as performance data at different operating speeds. Safety features include alarms for low coolant temperature and high raw water temperature.

    Original Title

    A96BODB4AF40_operation_datasheet_REV.0

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides specifications for a B4AF40 diesel engine intended for use in driving fire pumps. The 4-cylinder inline engine has a displacement of 4.5 liters and produces between 48-65 kW of power at speeds ranging from 1760-2600 rpm. The document outlines the engine's cooling, lubrication, electrical, fuel, air intake, and exhaust systems as well as performance data at different operating speeds. Safety features include alarms for low coolant temperature and high raw water temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    60 views3 pages

    B4 Engine Range B4AF40 Operation Datasheet

    Uploaded by

    Truong Nguyen
    This document provides specifications for a B4AF40 diesel engine intended for use in driving fire pumps. The 4-cylinder inline engine has a displacement of 4.5 liters and produces between 48-65 kW of power at speeds ranging from 1760-2600 rpm. The document outlines the engine's cooling, lubrication, electrical, fuel, air intake, and exhaust systems as well as performance data at different operating speeds. Safety features include alarms for low coolant temperature and high raw water temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    UL-FM Approved diesel engine range for fire pump drive Operation datasheet

    B4 ENGINE RANGE
    B4AF40
    OPERATION DATASHEET
    ENGINE GENERAL DATA
    Thermodynamic cycle Diesel - 4 stroke
    Engine architecture 4 cylinders, in line
    Firing order 1-3-4-2
    Air intake NA
    Cooling Water
    Charge air cooling system N/A
    Compression ratio 17,5:1
    Injection system Mecahnical rotary pump
    Combustion Direct injection
    Engine displacement 4.5 l
    Valves per cylinder 2
    Intake 1
    Exhaust 1
    Rotation (viewed from engine flywheel) CCW
    Engine cranckcase ventilation system Recirculated
    Engine weigth

    ENGINE PERFORMANCE
    Engine speed Gross power rating Fuel consumption rate
    [rpm] [kW (hp)] (1) (2) [l/h]

    1760 rpm 48 (55) 15


    2100 rpm 65 (75) 21
    2200 rpm 58 (79) 21
    2350 rpm 61 (83) 22
    2600 rpm 59 (80) 23
    2800 rpm 58 )79) 24
    2940 rpm 58 (79) 25

    EXHAUST SYSTEM
    Engine speed Max allowable back Exhaust gases flow
    Exhaust max temperature [°C]
    [rpm] pressure [kPa] [kg/h]
    1760 rpm 640 5 230
    2100 rpm 850 5 305
    2200 rpm 840 5 325
    2350 rpm 850 5 335
    2600 rpm 830 5 350
    2800 rpm 840 5 355
    2940 rpm 860 5 390

    ELECTRIC SYSTEM
    Voltage 12V 24V
    Alternator 90A 90A
    Starter motor 3 kW 3 kW
    Batteries per bank 1 2
    Battery cables max resistance 0,0013 ohm
    Battery cables min allowed size (3)
    1 m to 3 m AWG 0
    3 m to 4 m AWG 00
    4 m to 5 m AWG 000
    Battery CCA @ -18° C (4) 1000 min
    Reserve capacity (4) 430 min - 180 Ah
    UL-FM Approved diesel engine range for fire pump drive Operation datasheet

    B4 ENGINE RANGE
    B4AF40
    OPERATION DATASHEET
    LUBRICATION SYSTEM
    Lubrication oil minimum pressure @ idle speed 0,7 bar
    Lubrication oil maximum pressure @ rated speed 3,5 bar
    Lubrication oil maximum temperature 120°C
    Lubrication circuit full capacity 9,5 l

    AIR INDUCTION SYSTEM


    Max allowed Max allowed
    Engine speed Max inlet
    Combustion air flow [kg/h] restriction restriction
    [rpm] temperature [°C]
    (clean filter) [kPa] (dirty filter) [kPa]
    1760 rpm 215 55 3,5 6,5
    2100 rpm 285 55 3,5 6,5
    2200 rpm 305 55 3,5 6,5
    2350 rpm 314 55 3,5 6,5
    2600 rpm 328 55 3,5 6,5
    2800 rpm 333 55 3,5 6,5
    2940 rpm 366 55 3,5 6,5

    COOLING SYSTEM
    Engine speed Required raw water Required raw water Engine radiated heat
    Rejected heat [kW]
    [rpm] flow @ 15°C [l/min] flow @ 38°C [l/min] [kW]

    1760 rpm 43 38 42,5 11


    2100 rpm 45 41 45 12
    2200 rpm 47 41 45 14
    2350 rpm 47 45 50 16
    2600 rpm 48 45 50 18
    2800 rpm 48 45 50 20
    2940 rpm 49 45 50 20

    Thermostat Start opening 83°C


    Full opening 95°C
    Primary coolant temperature range 83-95°C
    Primary coolant maximum temperature 99°C
    Primary coolant low temperature alarm 35°C
    Primary coolant capacity 11 l
    Primary coolant pressure (cap) 0,7 bar
    Secondary circuit maximum pressure 3,8 bar
    Raw water temperature alarm 40°C

    LIQUID HEATERS
    Coolant heater 1500 W - 230 V 1500 W - 120 V
    Lubrication oil heater 350 W - 230 V

    FUEL SYSTEM
    Fuel pump max intake restriction 0 bar
    Max allowable fuel head above fuel pump 1m
    Minimum fuel line internal diameter 10 mm

    (1) Power at flywheel according to 97/68 EC (without fan), after 50 hours running, 3% tolerance, fuel Diesel EN 590
    Test conditions : ISO 3046/1, 25 °C air temperature, 100 kPa atmospheric pressure, 30% relative humidity - Applicable also toDIN
    6271, BS 5514, SAE J1349 Standards.

    (2) Power derating conditions: -3% for every 500 m height increment over 1000 m above sea level, -6% for 500 m increment over
    3000 m above sea level, -2% for every 5°C increment above 40°C.
    (3) Length combination of positive and negative cables.
    (4) Parameters evaluated according to SAE Standard J537.
    UL-FM Approved diesel engine range for fire pump drive Operation datasheet

    You might also like