Scribd
Upload
150 views2 pages

Pps Data Sheet

Uploaded by

Yap HS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
150 views2 pages

Pps Data Sheet

Uploaded by

Yap HS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet SIMONA® PPs

Trade name: SIMONA® PPs Revision: 30.04.2020


Date of printing: 26.05.2021

SIMONA® PPs

Data sheet update 30.04.2020

Moulding compound extruded PP-H,ECFH,16-09-003/006

Extruded to moulding compound standard DIN EN ISO 19069-1

Moulding compound pressed PP-H,QCFH,16-09-003/006

Pressed to moulding compound standard DIN EN ISO 19069-1

Density, g/cm³, 0.950


DIN EN ISO 1183

Tensile modulus of elasticity, MPa, 1600


DIN EN ISO 527

Yield stress, MPa, 32


DIN EN ISO 527

Elongation at yield, % , 8
DIN EN ISO 527

Impact strength, kJ/m², without break


DIN EN ISO 179

Notched impact strength Charpy, kJ/m², 6


DIN EN ISO 179-1eA

Dielectric strength, kV/mm , 22


DIN IEC 60243-1

Ball indentation hardness, MPa, 70


DIN EN ISO 2039-1

Shore hardness D (15 s), 72


DIN EN ISO 868

Mean coefficient of linear thermal expansion, K-1 , 1,6 x 10-4


ISO 11359-2

Surface resistivity, Ohm , ≥ 1013


DIN IEC 60093

Temperature range, °C 0 to +100

Fire behaviour DIN 4102 Low flammability in accordance with


DIN 4102 B1

Physiological safety in accordance with BfR no


(German Federal Institute for risk valuation)

All specifications are deemed to be approximate values in respect of the specific material and may vary depending on the
processing methods used. In general, data specified applies to average values measured on extruded sheets with a
thickness of 4 mm. In the case of sheets manufactured by means of pressing, testing is generally performed on sheets
with a thickness of 20 mm. Deviations from the values specified are possible if the sheets in this thickness are not available.
In the case of backed sheets, all technical specifications relate to the non-backed base sheets. Information presented
herein is not necessarily applicable to other products (e.g. pipes, solid rods) of the same material or products that have
undergone downstream processing. Suitability of materials for a specific field of application must be assessed by the party
responsible for processing or the end-user. All technical specifications presented herein are designed merely to provide

Page: 1 of 2
Technical Data Sheet SIMONA® PPs

SIMONA® PPs

assistance in terms of project planning. They do not constitute a guarantee of specific properties or qualities. For further
information, please contact our Technical Service Centre at [email protected].

Page: 2 of 2

You might also like