100% found this document useful (1 vote)
270 views7 pages

9 G Micro Servo: Smaller

The SG90 9g micro servo is a tiny, lightweight servo that can rotate approximately 180 degrees and works like standard servos but is smaller. It weighs 9g, measures 22.2 x 11.8 x 31mm, and has a stall torque of 1.8 kgf-cm. It operates on 4.8V and takes pulses between 1-2ms to rotate to positions including 0 degrees (middle), 90 degrees (left), and -90 degrees (right).

Uploaded by

qweqwe qwe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
100% found this document useful (1 vote)
270 views7 pages

9 G Micro Servo: Smaller

The SG90 9g micro servo is a tiny, lightweight servo that can rotate approximately 180 degrees and works like standard servos but is smaller. It weighs 9g, measures 22.2 x 11.8 x 31mm, and has a stall torque of 1.8 kgf-cm. It operates on 4.8V and takes pulses between 1-2ms to rotate to positions including 0 degrees (middle), 90 degrees (left), and -90 degrees (right).

Uploaded by

qweqwe qwe
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

SG90 9 g Micro Servo

Tiny and lightweight with high output power. Servo can rotate approximately
180 degrees (90 in each direction), and works just like the standard kinds but
smaller. You can use any servo code, hardware or library to control these
servos. Good for beginners who want to make stuff move without building a
motor controller with feedback & gear box, especially since it will fit in small
places. It comes with a 3 horns (arms) and hardware.

Specifications
• Weight: 9 g
• Dimension: 22.2 x 11.8 x 31 mm approx.
• Stall torque: 1.8 kgf·cm
• Operating speed: 0.1 s/60 degree
• Operating voltage: 4.8 V (~5V)
• Dead band width: 10 μs
• Temperature range: 0 ºC – 55 ºC
Position "0" (1.5 ms pulse) is middle, "90" (~2ms pulse) is all the way to the left.
ms pulse) is all the way to the right, ""-90" (~1ms pulse) is all the way to the
left.
TowerPro SG90 - Micro Servo

Basic Information
Modulation: Analog

Torque: 4.8V: 25.0 oz-in (1.80 kg-cm)

Speed: 4.8V: 0.10 sec/60°

Weight: 0.32 oz (9.0 g)

Dimensions:

Length: 0.91 in (23.1 mm)

Width: 0.48 in (12.2 mm)

Height:1.14 in (29.0 mm)

Motor Type: 3-pole


Gear Type: Plastic
Rotation/Support: Bushing

Additional Specifications
Rotational Range: 180°
Pulse Cycle: ca. 20 ms
Pulse Width: 500-2400 µs
T-Pro Mini Servo SG-90 9G Servo

The TP SG90 is similar in size and weight to the Hitec HS-55, and is a good
choice for most park flyers and helicopters. Hobbyists from around the
world has used the SG90 on famous planes like GWS Slow Stick, E-Flite
Airplanes, Great Planes, Thunder Tiger, Align, EDF jets and more. If you
are looking for a servo that won't break your arm or leg, this is the perfect
choice for you!

The TP SG90 servo weighs 0.32 ounces (9.0 grams). Total weight with wire
and connector is 0.37 ounces (10.6 grams).

The TP SG90 has the universal "S" type connector that fits most receivers,
including Futaba, JR, GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg
and Hitec.

The wire colors are Red = Battery(+) Brown = Battery(-) Orange = Signal

TP SG90 Specifications:

Dimensions (L x W x H) = 0.86 x 0.45 x 1.0 inch (22.0 x 11.5 x 27 mm)

Weight = 0.32 ounces (9 grams)

Weight with wire and connecter = 0.37 ounce (10.6 grams)

Stall Torque at 4.8 volts = 16.7 oz/in (1.2 kg/cm)

Operating Voltage = 4.0 to 7.2 volts

Operating Speed at 4.8 volts (no load) = 0.12 sec/ 60 degrees

Connector Wire Length = 9.75 inches (248 mm)


Universal "S" type connector fits most receivers

9g Tower Pro Servo

Tower Pro 9g servo


These Micro strong and made to last, great for planes. The servos include 3 servo arms.
Specs:

• DIMENSION: 26mm*13mm*24mm
• WEIGHT: 9G
• OPERATING SPEED: 0.12sec/60degree(4.8V);0.11sec/60degree(6V)
• STALL TORQUE: 1.2kg/cm or 17oz-in. (4.8V) 1.6kg/cm or 22oz-in.(6.0V)
• OPERATING VOLTAGE: 4.8V~6.0V
• FEATURE: 3 pole wire, all nylon gear, connector wire length: 15cm
The TG9e boasts the same performance as other servo's 10x the price with a
.10sec travel time and up to 1.5kg in torque and an ultra narrow dead
bandwidth!

The TG9e performance is on par with the famous HXT900, however the TG9e
isn't as resistant to crashes or over-loading.

Please always ensure your control surfaces are bind free.

Spec.

Dimension: 23x12.2x29mm

Torque: 1.5kg/cm (4.8V)

Operating speed: 0.10sec/60 degree 0.09sec/60 degree(6.0V)

Operating voltage: 4.8V

Temperature range: 0-55C

Dead band-width: 7us

Lead Length: 260mm


Important.
The TG9e does not have the same strength and longevity as the HXT900.

Please ensure your control surfaces are bind-free and always check servos
after a hard landing or crash!

Weight (g) 9
Torque (kg) 1.5
Speed(Sec/60deg) 0.09
A(mm) 30
B(mm) 23
C(mm) 27
D(mm) 12
E(mm) 33
F(mm) 16
SERVO MOTOR SG90 DATA SHEET

Tiny and lightweight with high output power. Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds
but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a
motor controller with feedback & gear box, especially since it will fit in small places. It comes with a 3 horns (arms) and hardware.

Position "0" (1.5 ms pulse) is middle, "90" (~2ms pulse) is middle,


is all the way to the right, "-90" (~1ms pulse) is all the way to the left.

You might also like