Kynar Flex® 2800-20

PVDF

Kynar Flex® 2800-20 resin

Kynar Flex® resins are fluorinated thermoplastic copolymers.

Outstanding characteristics: chemical resistance, imperviousness to UV, high barrier properties, high purity, good mechanical and thermo-
mechanical properties.

Main applications: flexible tubing, corrosion protection in the chemical industry, coating (painting, co-extrusion), off shore, wire and cable jacketing
with and without cross-linking.

Kynar Flex® resin is a standard grade of granules, compared to the homopolymer grades, which exhibits a lower modulus, a better resistance to
stress cracking in alkaline and oxidizing media, and a lower melting point.

For cable coating, extrusion of tube and plaque, injection molding.

Additional characteristics:
- Easily processed using conventional equipment
- Excellent thermal stability
- Retains properties after aging
- Pigmentable
- UL RTI temperature rating 125ºC
Rheological properties Value Unit Test Standard

Melt volume-flow rate, MVR 4.5 cm³/10min ISO 1133

Temperature 230 °C -

Load 5 kg -

Mechanical properties Value Unit Test Standard

Tensile Modulus 700 MPa ISO 527-1/-2

Yield stress 27 MPa ISO 527-1/-2

Yield strain 15 % ISO 527-1/-2

Nominal strain at break >50 % ISO 527-1/-2

Charpy impact strength, +23°C 177 kJ/m² ISO 179/1eU

Charpy impact strength, -30°C 235 kJ/m² ISO 179/1eU

Charpy notched impact strength, +23°C 60 kJ/m² ISO 179/1eA

Charpy notched impact strength, -30°C 5 kJ/m² ISO 179/1eA

Thermal properties Value Unit Test Standard

Melting temperature, 10°C/min 143 °C ISO 11357-1/-3

Glass transition temperature, 10°C/min -36 °C ISO 11357-1/-2

Temp. of deflection under load, 1.80 MPa 48 °C ISO 75-1/-2

Temp. of deflection under load, 0.45 MPa 68 °C ISO 75-1/-2

Vicat softening temperature, 50°C/h 50N 76 °C ISO 306

Coeff. of linear therm. expansion, parallel 160 E-6/K ISO 11359-1/-2

Burning Behav. at 1.5 mm nom. thickn. V-0 class IEC 60695-11-10

Last Change: 2018-03-06 Page: 1/5

Disclaimer - Please consult Arkema’s disclaimer regarding the use of Arkema’s products on http://www.arkema.com/en/products/product-safety/disclaimer/index.html
 Kynar Flex® 2800-20
PVDF

Thickness tested 1.6 mm -

Burning Behav. at thickness h V-0 class IEC 60695-11-10

Thickness tested 0.8 mm -

Oxygen index 42 % ISO 4589-1/-2

Electrical properties Value Unit Test Standard

Relative permittivity, 100Hz 11 - IEC 60250

Relative permittivity, 1MHz 6 - IEC 60250

Dissipation factor, 100Hz 570 E-4 IEC 60250

Dissipation factor, 1MHz 2340 E-4 IEC 60250

Volume resistivity 2E12 Ohm*m IEC 60093

Other properties Value Unit Test Standard

Water absorption 0.03 % Sim. to ISO 62

Density 1780 kg/m³ ISO 1183

Test specimen production Value Unit Test Standard

Injection Molding, melt temperature 240 °C ISO 294

Injection Molding, mold temperature 90 °C ISO 10724

Injection Molding, injection velocity 10 mm/s ISO 294

Injection Molding, pressure at hold 13 MPa ISO 294

Last Change: 2018-03-06 Page: 2/5

Disclaimer - Please consult Arkema’s disclaimer regarding the use of Arkema’s products on http://www.arkema.com/en/products/product-safety/disclaimer/index.html
 Kynar Flex® 2800-20
PVDF

Diagrams

Viscosity-shear rate Shearstress-shear rate

1E5 190 °C 1E6 190 °C

210 °C 210 °C
232 °C 232 °C

Shearstress in Pa
Viscosity in Pa s

1E4

1E5

1E3

1E2 1E4
1E0 1E1 1E2 1E3 1E4 1E0 1E1 1E2 1E3 1E4

Shear rate in 1/s Shear rate in 1/s

Stress-strain Secant modulus-strain

70 -30 °C 2500 -30 °C

23 °C 23 °C
60 °C 60 °C
60 Y
80 °C 80 °C
100 °C 2000 100 °C
50 120 °C 120 °C
Secant modulus in MPa

B - Break B - Break
Stress in MPa

Y - Yield 1500 Y - Yield

40

30
1000
Y
20
Y
500
10
Y
B
B Y
Y
0 0 BB
0 10 20 30 40 50 0 10 20 30 40 50

Strain in % Strain in %

Characteristics

Processing Special Characteristics

Injection Molding, Film Extrusion, Profile Extrusion, Sheet Extrusion, Light stabilized or stable to light, U.V. stabilized or stable to weather,
Other Extrusion Heat stabilized or stable to heat

Delivery form Regional Availability

Pellets North America, Europe, Asia Pacific, South and Central America, Near
East/Africa

Chemical Media Resistance

Acids
Acetic Acid (5% by mass) (23°C)
Citric Acid solution (10% by mass) (23°C)
Last Change: 2018-03-06 Page: 3/5
Disclaimer - Please consult Arkema’s disclaimer regarding the use of Arkema’s products on http://www.arkema.com/en/products/product-safety/disclaimer/index.html
 Kynar Flex® 2800-20
PVDF

Lactic Acid (10% by mass) (23°C)

Hydrochloric Acid (36% by mass) (23°C)
Nitric Acid (40% by mass) (23°C)
Sulfuric Acid (38% by mass) (23°C)
Sulfuric Acid (5% by mass) (23°C)
Chromic Acid solution (40% by mass) (23°C)

Bases
Sodium Hydroxide solution (35% by mass) (23°C)
Sodium Hydroxide solution (1% by mass) (23°C)
Ammonium Hydroxide solution (10% by mass) (23°C)

Alcohols
Isopropyl alcohol (23°C)
Methanol (23°C)
Ethanol (23°C)

Hydrocarbons
n-Hexane (23°C)
Toluene (23°C)
iso-Octane (23°C)

Ketones
Acetone (23°C)

Ethers
Diethyl ether (23°C)

Mineral oils
SAE 10W40 multigrade motor oil (23°C)
SAE 10W40 multigrade motor oil (130°C)
SAE 80/90 hypoid-gear oil (130°C)
Insulating Oil (23°C)

Standard Fuels
ISO 1817 Liquid 1 (60°C)
ISO 1817 Liquid 2 (60°C)
ISO 1817 Liquid 3 (60°C)
ISO 1817 Liquid 4 (60°C)
Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23°C)
Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (23°C)
Diesel fuel (pref. ISO 1817 Liquid F) (90°C)
Diesel fuel (pref. ISO 1817 Liquid F) (>90°C)

Salt solutions
Sodium Chloride solution (10% by mass) (23°C)
Sodium Hypochlorite solution (10% by mass) (23°C)
Sodium Carbonate solution (20% by mass) (23°C)
Sodium Carbonate solution (2% by mass) (23°C)
Zinc Chloride solution (50% by mass) (23°C)

Other

Last Change: 2018-03-06 Page: 4/5

Disclaimer - Please consult Arkema’s disclaimer regarding the use of Arkema’s products on http://www.arkema.com/en/products/product-safety/disclaimer/index.html
 Kynar Flex® 2800-20
PVDF

Ethyl Acetate (23°C)

Hydrogen peroxide (23°C)
Ethylene Glycol (50% by mass) in water (108°C)
Water (23°C)
Deionized water (90°C)
Phenol solution (5% by mass) (23°C)

Last Change: 2018-03-06 Page: 5/5

Disclaimer - Please consult Arkema’s disclaimer regarding the use of Arkema’s products on http://www.arkema.com/en/products/product-safety/disclaimer/index.html