Scribd
Upload
59 views2 pages

Error Log Export Via Transfer Manager

To export an error log from an SRS controller via Transfer Manager: 1. Open the Transfer Manager utility in SRS 2. Connect to the controller using either a crossover cable directly or over the network using the IP address and default login credentials 3. Select the "Logger" box and click Transfer to download the error log file to your PC

Uploaded by

Julio Liranzo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
59 views2 pages

Error Log Export Via Transfer Manager

To export an error log from an SRS controller via Transfer Manager: 1. Open the Transfer Manager utility in SRS 2. Connect to the controller using either a crossover cable directly or over the network using the IP address and default login credentials 3. Select the "Logger" box and click Transfer to download the error log file to your PC

Uploaded by

Julio Liranzo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Export Error Log via Transfer Manager

1. Open SRS.
2. Open the Transfer Manager utility.

3. If connecting directly to the controller use a crossover cable. If connecting to the controller
through a network or hub, use a standard Ethernet cable. Enter the IP address of the port you
are plugged into on the controller (J204 or J205). Use “default” as the username and leave the
password field blank. Click “OK” to connect.

4. Once connected on the right-hand side check the box next to “Logger” and click Transfer to
transfer it to your PC.
5. Once complete close the Transfer Manager and navigate to your SRS cell in Windows Explorer
(C:\Users\username\Documents\Staubli\CS8\cellname).
6. In the “log” folder is the errors.log file.

You might also like