Scribd
Upload
545 views2 pages

Mfac34-High Impedance Differential Relay

This document summarizes test results for a high impedance differential relay. It includes general information about the relay and circuit under test. It then details the results of various electrical tests performed, including pickup/dropout tests to verify the relay operates within specified parameters at different settings, an operating time test to check speed of operation, and final setting tests. Functional tests were also completed to check components like output contacts and flag operation. The tests were performed and witnessed on a given date.

Uploaded by

THILAKKUMAR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
545 views2 pages

Mfac34-High Impedance Differential Relay

This document summarizes test results for a high impedance differential relay. It includes general information about the relay and circuit under test. It then details the results of various electrical tests performed, including pickup/dropout tests to verify the relay operates within specified parameters at different settings, an operating time test to check speed of operation, and final setting tests. Functional tests were also completed to check components like output contacts and flag operation. The tests were performed and witnessed on a given date.

Uploaded by

THILAKKUMAR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Customer Contract

Location #
Project
Contractor
AREVA T&D Site test record RELAY TEST Doc. Ref.

MFAC34- HIGH IMPEDANCE DIFFERENTIAL RELAY


1. GENERAL DATA AND INFORMATION:
Circuit Ref. Designation
Panel No. Serial No.
Make Model No.
Dwg & Sh No. Frequency:
Flag Type No. of Contacts
Setting Range:

2. MECHANICAL CHECKS AND VISUAL INSPECTION:


ITEM DESCRIPTION CHECKED
1 Inspect for any physical damage or defects.
2 Verify connections as per approved drawings.
3 Check that serial no. of relay matching with serial no. of case.
4 Relay CT shorting function checked.
5 Test switch checked for correct function.
6 Stabilizing resistors final setting value.

3. ELECTRICAL TESTS:
3.1 PICKUP / DORP OFF TEST:
Injection done including METROSIL resistor.
R Y B
Pickup
Voltage
Dropof Dropof Dropof current
setting Pickup Pickup Pickup Pickup Pickup Pickup
f f f limit
(V) current voltage current voltage current voltage
voltage voltage voltage (mA)
(mA) (V) (mA) (V) (mA) (V)
(V) (V) (V)
25 18-20

50 18-20

75 18-23

100 19-28

125 20-39

150 24-60

175 33-95
Plug
33-95
remove
Note: pickup voltage +/- 10% setting ,D/O and P/U ratio >50%.

Test performed by Test witnessed by Date of test


AREVA T&D
Name MUSTAFA HAJI

Signature
Customer Contract
Location #
Project
Contractor
AREVA T&D Site test record RELAY TEST Doc. Ref.

MFAC34- HIGH IMPEDANCE DIFFERENTIAL RELAY


3.2 OPERATING TIME TEST:
Setting voltage Applied voltage Measured operating time in msec
Limits
(V) 2xsetting (V) R Y B
Between 15-30 msec
(Max. to min. setting
respectively)
(Refer graph)

3.3 FINAL SETTING TESTS:


3.3.1 PICKUP / DORP OFF TEST:

R Y B
Opearate
Voltage
Dropof Dropof Dropof current
setting Pickup Pickup Pickup Pickup Pickup Pickup
f f f limits
(V) current voltage current voltage current voltage
voltage voltage voltage (mA)
(mA) (V) (mA) (V) (mA) (V)
(V) (V) (V)

Note: pickup voltage +/- 10% setting ,D/O and P/U ratio >50%.

3.3.2 OPERATING TIME TEST:


Applied voltage Measured operating time in msec
Setting voltage (V) Remarks
2xsetting (V) R Y B
Between 15-30
msec
(Max. to min.
setting respectively)
(Refer graph)

4. FUNCTIONAL TESTS:
Item Description Checked
1 All output contacts resistance measured.
2 Flag operation checked.
3 Check metrosil non-linear resistors connection

Test performed by Test witnessed by Date of test


AREVA T&D
Name MUSTAFA HAJI

Signature

You might also like