Scribd Logo
Upload

Welcome to Scribd!

  • 172 views

    RPM Sensor Wiring OT01-P1: Magnetic RPM Sensor Tap-In Hall or Optic or Tacho RPM Sensor Tap-In

    Uploaded by

    Quốc Vượng
    The document provides wiring instructions for tapping into an RPM sensor signal. It shows diagrams for tapping into either a magnetic or Hall effect RPM sensor. It notes that some ECUs have a green RPM output wire on the P2 connector that can be directly connected to the TCU RPM input, but the ECU and TCU must share the same ground point and the TCU input pulses must match the ECU RPM output pulses. Software settings on the ECU may also need to be configured.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    RPM Sensor Wiring OT01-P1: Magnetic RPM Sensor Tap-In Hall or Optic or Tacho RPM Sensor Tap-In

    Uploaded by

    Quốc Vượng
    172 views5 pages
    The document provides wiring instructions for tapping into an RPM sensor signal. It shows diagrams for tapping into either a magnetic or Hall effect RPM sensor. It notes that some ECUs have a green RPM output wire on the P2 connector that can be directly connected to the TCU RPM input, but the ECU and TCU must share the same ground point and the TCU input pulses must match the ECU RPM output pulses. Software settings on the ECU may also need to be configured.

    Original Title

    RPM-Sensor-Wiring-OT01_P1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides wiring instructions for tapping into an RPM sensor signal. It shows diagrams for tapping into either a magnetic or Hall effect RPM sensor. It notes that some ECUs have a green RPM output wire on the P2 connector that can be directly connected to the TCU RPM input, but the ECU and TCU must share the same ground point and the TCU input pulses must match the ECU RPM output pulses. Software settings on the ECU may also need to be configured.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    172 views5 pages

    RPM Sensor Wiring OT01-P1: Magnetic RPM Sensor Tap-In Hall or Optic or Tacho RPM Sensor Tap-In

    Uploaded by

    Quốc Vượng
    The document provides wiring instructions for tapping into an RPM sensor signal. It shows diagrams for tapping into either a magnetic or Hall effect RPM sensor. It notes that some ECUs have a green RPM output wire on the P2 connector that can be directly connected to the TCU RPM input, but the ECU and TCU must share the same ground point and the TCU input pulses must match the ECU RPM output pulses. Software settings on the ECU may also need to be configured.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    RPM Sensor Wiring OT01-P1

    Last Changed: 05/09/2019


    Harness: OT01-P1

    Magnetic RPM Sensor Tap-In Hall or Optic or Tacho RPM Sensor Tap-In
    Jumper 1 Open
    J1 & J2
    Orion

    Reference Volts Ground Power


    P2

    Signal Signal

    ECU/TCU

    ECU/TCU
    RPM Sensor -
    OEM
    RPM Sensor -

    OEM
    P4 P3

    RPM Sensor + J1 J1
    RPM Sensor +

    J1 RPM Right J3 J1 RPM Left J3

    Green RPM In Hall Mag Hall Mag


    P1

    RPM Open RPM Closed


    INFO
    Magnetic Jumper Settings Hall Jumper Settings
    PWR
    Coms

    Green RPM In Green RPM In

    Note that Mercury2 or Orion ECU's have a green RPM Output on the
    P2 conectors. This can be tied to the TCU RPM Input directly. Ensure
    that both ECU and TCU share the same earth point. TCU Input pulses
    must be the same as RPM output pulses of the ECU.
    Software Settings
    RPM Sensor Wiring OT01-P1
    Last Changed: 05/09/2019
    Harness: OT01-P1

    Magnetic RPM Sensor Tap-In Hall or Optic or Tacho RPM Sensor Tap-In
    Jumper 1 Open
    J1 & J2
    Orion

    Reference Volts Ground Power


    P2

    Signal Signal

    ECU/TCU

    ECU/TCU
    RPM Sensor -
    OEM
    RPM Sensor -

    OEM
    P4 P3

    RPM Sensor + J1 J1
    RPM Sensor +

    J1 RPM Right J3 J1 RPM Left J3

    Green RPM In Hall Mag Hall Mag


    P1

    RPM Open RPM Closed


    INFO
    Magnetic Jumper Settings Hall Jumper Settings
    PWR
    Coms

    Green RPM In Green RPM In

    Note that Mercury2 or Orion ECU's have a green RPM Output on the
    P2 conectors. This can be tied to the TCU RPM Input directly. Ensure
    that both ECU and TCU share the same earth point. TCU Input pulses
    must be the same as RPM output pulses of the ECU.
    Software Settings
    RPM Sensor Wiring OT01-P1
    Last Changed: 05/09/2019
    Harness: OT01-P1

    Magnetic RPM Sensor Tap-In Hall or Optic or Tacho RPM Sensor Tap-In
    Jumper 1 Open
    J1 & J2
    Orion

    Reference Volts Ground Power


    P2

    Signal Signal

    ECU/TCU

    ECU/TCU
    RPM Sensor -
    OEM
    RPM Sensor -

    OEM
    P4 P3

    RPM Sensor + J1 J1
    RPM Sensor +

    J1 RPM Right J3 J1 RPM Left J3

    Green RPM In Hall Mag Hall Mag


    P1

    RPM Open RPM Closed


    INFO
    Magnetic Jumper Settings Hall Jumper Settings
    PWR
    Coms

    Green RPM In Green RPM In

    Note that Mercury2 or Orion ECU's have a green RPM Output on the
    P2 conectors. This can be tied to the TCU RPM Input directly. Ensure
    that both ECU and TCU share the same earth point. TCU Input pulses
    must be the same as RPM output pulses of the ECU.
    Software Settings
    RPM Sensor Wiring OT01-P1
    Last Changed: 05/09/2019
    Harness: OT01-P1

    Magnetic RPM Sensor Tap-In Hall or Optic or Tacho RPM Sensor Tap-In
    Jumper 1 Open
    J1 & J2
    Orion

    Reference Volts Ground Power


    P2

    Signal Signal

    ECU/TCU

    ECU/TCU
    RPM Sensor -
    OEM
    RPM Sensor -

    OEM
    P4 P3

    RPM Sensor + J1 J1
    RPM Sensor +

    J1 RPM Right J3 J1 RPM Left J3

    Green RPM In Hall Mag Hall Mag


    P1

    RPM Open RPM Closed


    INFO
    Magnetic Jumper Settings Hall Jumper Settings
    PWR
    Coms

    Green RPM In Green RPM In

    Note that Mercury2 or Orion ECU's have a green RPM Output on the
    P2 conectors. This can be tied to the TCU RPM Input directly. Ensure
    that both ECU and TCU share the same earth point. TCU Input pulses
    must be the same as RPM output pulses of the ECU.
    Software Settings
    RPM Sensor Wiring OT01-P1
    Last Changed: 05/09/2019
    Harness: OT01-P1

    Magnetic RPM Sensor Tap-In Hall or Optic or Tacho RPM Sensor Tap-In
    Jumper 1 Open
    J1 & J2
    Orion

    Reference Volts Ground Power


    P2

    Signal Signal

    ECU/TCU

    ECU/TCU
    RPM Sensor -
    OEM
    RPM Sensor -

    OEM
    P4 P3

    RPM Sensor + J1 J1
    RPM Sensor +

    J1 RPM Right J3 J1 RPM Left J3

    Green RPM In Hall Mag Hall Mag


    P1

    RPM Open RPM Closed


    INFO
    Magnetic Jumper Settings Hall Jumper Settings
    PWR
    Coms

    Green RPM In Green RPM In

    Note that Mercury2 or Orion ECU's have a green RPM Output on the
    P2 conectors. This can be tied to the TCU RPM Input directly. Ensure
    that both ECU and TCU share the same earth point. TCU Input pulses
    must be the same as RPM output pulses of the ECU.
    Software Settings

    You might also like