Classic Line: Planetary Mills

FRITSCH · PLANETARY MILLS classic line
IDEAL FOR
GEOLOGY AND MINERALOGY
CERAMICS
CHEMISTRY
BIOLOGY
PHARMACEUTICALS
METALLURGY
MATERIAL TECHNOLOGY
SAMPLE PREPARATION
FOR ANALYSIS
classic line
fritsch classic line
THE LABORATORY STANDARD
A D VA N TA G E S T O Y O U O F T H E F R I T S C H
C L A S S I C L I N E AT A G L A N C E :
• Fast grinding to below 1 µm
• Up to 800 rpm
• Safe clamping of the bowls with the Safe-Lock-System
• Simple, ergonomic handling and easy cleaning
• Grinding bowls and balls in 8 different materials to suit all needs and
avoidance of contamination through abrasion
The FRITSCH family business is an internationally respected manufacturer of
application-orientated laboratory instruments. In 1961 FRITSCH applied for a
world wide patent for the first Laboratory Planetary Mill. In 1996 FRITSCH also
F R I T S C H . one step ahead .

patented the first ever Planetary Mill with only one working station (Mono Mill).
Since then FRITSCH Planetary Mills have become the standard in industry and
research laboratories worldwide.
2
pulverisette 6
W O R L D W I D E S TA N D A R D
Worldwide, FRITSCH Planetary Mills of the classic line are Planetary Ball Mills – high-performance all-rounders in routine
the laboratory standard for the widest range of applications. laboratory work
The name PULVERISETTE is synonymous with fast, loss- In Planetary Ball Mills, the comminution of the material to be
free fine grinding of samples, operator friendly, consistent ground takes place primarily through the high-energy impact of
reproducibility and long, reliable service life even under grinding balls. To achieve this, the grinding bowl, containing the
continuous, heavy duty usage. material to be ground and grinding balls, rotates around its own
axis on a main disk whilst rotating rapidly in the opposite direction.
All classic line Planetary Mills are characterised by At a certain speed, with this configuration, the centrifugal force
particularly easy, ergonomic operation, offer fast and easy causes the ground sample material and grinding balls to separate
cleaning and guarantee safe clamping of the bowls. from the inner wall of the grinding bowl. The grinding balls then
cross the bowl at high speed and further grind the sample
Depending on the fineness required, the grinding can be material by impact against the opposite bowl wall. In addition
performed dry, in suspension or in inert gas. In addition impact between the balls themselves on
to comminution, you can also use the Planetary Mills of the sample material adds to the size
the FRITSCH classic line for mixing and homogenising reduction process.
k
di s
ng
of emulsions and pastes or for mechanical alloying and

f th e su p p or ti
activation in material research. Specific application examples

and a table with grinding results
e nt o
Select with confidence the right option for your special needs can be found at www.fritsch.de
ve m
Rotation of the
from the unique FRITSCH classic line -range of Planetary Ball
Mo
grinding bowl
Mills!
Working principle of Planetary Ball Mills
3
THE PROGRAMME
Planetary Mill PULVERISETTE 5 classic line
Fast and fine
4 working stations 2 working stations
Working principle Impact force Impact force

Number of working stations 4 2
Grinding bowl sizes 80, 250, 500 ml 80, 250, 500 ml
Grinding ball diameter 0.5 – 40 mm 0.5 – 40 mm
Max. feed size (depending on the material) 10 mm 10 mm
Min. sample quantity 10 ml 10 ml
Max. sample quantity 900 ml 450 ml
Final fineness < 1 µm < 1 µm
Typical grinding time down to analytical fineness 4 min 4 min
Grinding process Dry/wet Dry/wet
Grinding in inert gas Yes Yes
Gas pressure and temperature measurement Yes Yes
Rotational speed of main disk 50 – 400 rpm 50 – 400 rpm
Transmission ratio
i = 1 : –2.19 i = 1 : –2.19
grinding bowl/planetary disk relative relative
Effective diameter of main disk ~ 250 mm ~ 250 mm

Centrifugal acceleration (g = 9.81 m/s )
2
22 g 22 g
100-120/200-240 V/1~, 100-120/200-240 V/1~,
Electrical details
50-60 Hz, 1300/1600 watt 50-60 Hz, 1300/1600 watt
Motor shaft power in accordance with

1.5 kW 1.5 kW
VDE 0530, EN 60034
Weight Net: 120 kg, gross: 155 kg Net: 100 kg, gross: 135 kg
Dimensions w x d x h Bench top instrument: 58 x 67 x 57 cm Bench top instrument: 58 x 67 x 57 cm
Packing details Pallet case: 100 x 72 x 83 cm Pallet case: 100 x 72 x 83 cm
4
Free FRITSCH-sample grinding!
Send us your samples - we will advise you which mill is the right one for you.
Or take a look in the practical grinding report database by logging on
www.fritsch.de select menu item Sample Preparation / Solutions.
Planetary Mono Mill Planetary Micro Mill Vario-Planetary Mill

PULVERISETTE 6 classic line PULVERISETTE 7 classic line PULVERISETTE 4 classic line
High performance
Ideal for the smallest quantities Unique a variable transmission ratio
in minimum space
Impact force Impact force Impact force

1 2 2
80, 250, 500 ml 12, 45 ml 12, 45, 80, 250, 500 ml
0.5 – 40 mm 0.5 – 15 mm 0.5 – 40 mm
10 mm 5 mm 10 mm
10 ml 0.5 ml 0.5 ml
225 ml 40 ml 450 ml
< 1 µm < 1 µm < 1 µm
4 min 3 min 4 min
Dry/wet Dry/wet Dry/wet
Yes Only possible in glove box Yes
Yes No Yes
100 – 650 rpm 100 – 800 rpm 0 – 400 rpm
i relative = 1 : –1.82 i relative

= 1 : –2 Variable
121.6 mm 140 mm ~ 250 mm

29 g 50 g 22 g
100-120/200-240 V/1~, 100-120/200-240 V/1~, 400 V/3~,
50-60 Hz, 1100 watt 50-60 Hz, 880 watt 50-60 Hz, 6000 watt
2.2 kW supporting disk,

0.75 kW 0.37 kW
2.5 kW planetary disk
Net: 63 kg, gross: 83 kg Net: 35 kg, gross: 55 kg Net: 320 kg, gross: 380 kg
Bench top instrument: 37 x 53 x 50 cm Bench top instrument: 37 x 53 x 50 cm Floor instrument: 60 x 80 x 110 cm
Wooden case: 68 x 54 x 72 cm Wooden case: 68 x 54 x 72 cm Wooden case: 85 x 85 x 140 cm
5
P U L V E R I S E T T E 5 classic line
T H E F R I T S C H P L A N E TA R Y M I L L
• Fast comminution of laboratory samples with up to 400 rpm
• Adjustable timer accurate to one second
• Suitable for grinding hard to soft materials, including in suspensions
• Perfect for homogenising of emulsions and pastes
• 4 or 2 working stations
• Simultaneous processing of up to 8 samples
• Useful capacity up to 4 x 225 ml
• Bowl sizes 80 ml, 250 ml, 500 ml volume
Also available: The p-5 classic line

with 2 working stations
FA S T A N D F I N E
The ideal Planetary Mill: Quick and reliable thanks to the

particularly high-energy effect of the grinding balls, the
PULVERISETTE 5 classic line delivers loss-free grinding
results down to colloidal fineness of dry laboratory samples
or solids in suspension and even mixes and homogenises
emulsions and pastes. The fixed transmission ratio, rotational
speed regulation and precision quartz timing ensure exactly
reproducible grinding conditions.
6
TECHNICAL DATA
Electrical details
100-120/200-240 V/1~, 50-60 Hz, 1300/1600 watt
VDE 0530, EN 60034
1.5 kW
Weight with 4 working stations 2 working stations
Net 120 kg 100 kg
Gross 155 kg 135 kg
Dimensions w x d x h
Bench top instrument: 58 x 67 x 57 cm
Packing w x d x h
Pallet case: 100 x 72 x 83 cm
Emissions value of workplace according to IEC 61672-1
Up to approx. 83 dB(A)
(depending on the material to be ground, grinding bowls/balls, selected
rotational speed)
Order no. for 4 working stations 2 working stations
05.5000.00 05.6000.00
Fast and reliable: The practical Safe- Saves time: Simultaneous grinding of up to 8
Lock-System samples
APPLICATION EXAMPLES
Geology and mineralogy Rock, gravel, sand, minerals
Ceramics Porcelain, sintered ceramics, clay, fireclay
GTM
Chemistry Pesticides, fertilisers, salts,
inorganic and organic materials
compatible
INF
15
Biology Plants, leaves, freeze-dried samples

4/
OR
M
1
AT Pharmaceuticals Ophthalmological agents, gels, creams, extracts,

I O N PA GE
drugs, pastes, dragées, tablets
Metallurgy Ores, sinters
Material technology Pigments, precious materials, new materials,
alloys, mechanical alloying and activating
Analysis preparation Spectroscopy, X-ray fluorescence,
X-ray structure analysis, chromatography
FACTS AND ADVANTAGES

• Toothed belt drive for bowls provides constant transmission ratio
• Rotational speed regulated by microprocessor
• Digital display of the actual rotational speed of the supporting disk
• Programmable grinding and break times and grinding sequences – for short-time operation adjustable down to the second
• Smaller grinding bowls also possible with an adapter
• RS232 interface for transmission of process parameters (validation)
• Reversing function
• Overload protection with automatic rotational speed adjustment and display
• Maintenance-free drive due to electronically regulated rotary current motor (1.5 kW) with frequency converter and permanently lubricated bearings
• Grinding chamber hood safety lock with stoppage monitoring
• Membrane keyboard
• Robust housing of impact-resistant plastic
• Grinding chamber with forced air ventilation
• Gas pressured springs for easy opening of the cover
• Energy-save-function (electricity-saving mode)
• Certified safety CE
• 2-year guarantee
7
T H E F R I T S C H P L A N E TA R Y M O N O M I L L
• Special grinding force due to a rotational speed of up to 650 rpm
• Low space requirements and ergonomic design
• Particularly easy-to-use
• Timer programming precise to ± one second
• Suitable for grinding hard to soft materials, dry or in suspension
• Perfect mixing and homogenising of emulsions
• Useful capacity up to 225 ml
• Bowl sizes 80 ml, 250 ml and 500 ml volume
HIGH PERFORMANCE IN
M I N I M U M S PA C E
The PULVERISETTE 6 classic line is a high-per formance

Planetary Ball Mill with a single grinding bowl mount and
practical, easily adjustable imbalance compensation.
Advantage to you: Particularly easy use and high-energy
effect up to 650 rpm. This ensures a constantly high grinding
performance with extremely low space requirements for loss-
free grinding results even in suspension.
The electronic timer adjustable to one second and the
programmable, automated reversing feature ensure precise,
consistent reproducibility and grinding of even the smallest
samples. At the same time, the PULVERISETTE 6 classic line
is ideally suited for mechanical alloying or for mixing and
perfect homogenising of emulsions and pastes.
8
TECHNICAL DATA
Electrical details
100-120/200-240 V/1~, 50-60 Hz, 1100 watt
Motor shaft power in accordance with VDE 0530,
EN 60034
0.75 kW
Weight
Net 63 kg
Gross 83 kg
Packaging w x d x h
Wooden case: 68 x 54 x 72 cm
rotational speed)
Order no.
06.2000.00
Imbalance compensation with simple Practical: The membrane keyboard can

mechanical adjustment be operated when the mill is closed
GTM
compatible
INF
15

4/
OR
M
1
AT Pharmaceuticals Ophthalmological agents, gels, creams, extracts,

I O N PA GE

• Large rotational speed range with accurate display
• Grinding chamber completely encapsulated but easy to open
• Cooling of the grinding chamber with a built-in fan for long grinding times
• Exactly reproducible grinding results thanks to a regulated drive, precise transmission ratio (toothed belt), programmable microprocessor control electronics
• Programmable interval and break times
• Smaller grinding bowls also possible with an adapter
• RS232 interface for outputting process data (validation)
• Monitoring of the grinding parameters even when grinding chamber is open through an ergonomically positioned and always visible, splash-proof IP65 membrane keyboard
• Easy cleaning of the grinding elements
• Recyclable plastic housing
• Extensive range of accessories
• Mains voltage (100-120/200-240 V) configurable at the instrument
9
T H E F R I T S C H P L A N E TA R Y M I C R O M I L L
• Rotational speed up to 800 rpm
• Fast fine grinding of small quantities
• Small footprint
• Programmable microprocessor control
• Up to 99 repetitions of the grinding cycle
• Suitable for grinding hard to soft materials, including in suspension
• Useful capacity up to 2 x 20 ml
•Grinding bowl sizes of 12 and 45 ml volume
IDEAL FOR SMALLEST QUANTITIES
The PULVERISETTE 7 classic line is ideally suited to fast,

uniform, and extremely fine comminution of very small
samples down to colloidal fineness or for mixing and per-
fect homogenisation of emulsions or pastes.
The special microprocessor control with up to 99 programm
able repetitions of the grinding cycle ensures exceptionally
fast, precise, reproducible results. A mill that combines
particularly high grinding per formance with low bench
space requirements!
10
TECHNICAL DATA
Electrical details
100-120/200-240 V/1~, 50-60 Hz, 880 watt
EN 60034
0.37 kW
Weight
Net 35 kg
Gross 55 kg
Packaging w x d x h
rotational speed)
Order no.
07.4000.00
Unbeatably fast: Rotational speed up Impressive: Fast and fine grinding of smallest
to 800 rpm quantities
Pharmaceuticals Ophthalmological agents, gels, creams, extracts,

• Large rotational speed range
• Grinding chamber completely encapsulated but easy to open
• Cooling of the grinding chamber with a built-in fan for long grinding times
• Programmable microprocessor control
• Precise rotational speed regulation with display of set/actual values
• Programme-timer for grinding operation and cooling phases
• RS232 interface for output of process data and programming of grinding cycles
• Ergonomic IP64 membrane keyboard
• Maintenance-free drive with asynchronous motor and frequency converter
• Mains voltage (100-120/200-240 V) configurable on the instrument
• Recyclable plastic housing
11
T H E F R I T S C H VA R I O - P L A N E TA R Y M I L L
• Flexible configurable grinding conditions: impact and/or friction
• Rotational speed up to 400 rpm
• Ideal for mechanical alloying and activating
• Specially suited for material research and development applications
• Ultimate fineness down to 0.1 µm
• Useful capacity of 2 x 0.5 ml to 2 x 225 ml
• Bowl sizes 12 ml, 45 ml, 80 ml, 250 ml and 500 ml capacity
Par ticularly versatile: The FRITSCH

grinding bowl programme
U N I Q U E : W I T H VA R I A B L E
T R A N S M I S S I O N R AT I O
In contrast to conventional Planetary Mills, the rotational How the variable PULVERISETTE 4 classic line functions
speed of the grinding bowls and supporting disk can be
configured separately in the PULVERISETTE 4 classic line. You can directly influence the movement and paths of the grinding
Advantage to you: A single mill for mechanical activating balls by varying the transmission ratio between the grinding bowls
and alloying providing optimum grinding conditions suited and supporting disk: Depending on the setting, you can obtain high
to the respective material to be ground and the size of impact energy or high friction, according to your needs, or have
the grinding bowls and balls! For results that cannot be your PULVERISETTE 4 classic line operate as a Centrifugal Mill.
achieved with other Ball Mills. You are free to choose all intermediate levels and combinations
between friction-based and impact-based comminution. This
makes the mill uniquely versatile.
The mill is controlled by integral software, in which up to
9 programmes can be saved and then loaded quickly and
easily via the mill display.
12
TECHNICAL DATA
Electrical details
400 V/3~, 50-60 Hz, 6000 watt
EN 60034
2.2 kW supporting disk
2.5 kW planetary disk
Weight
Net 320 kg
Gross 380 kg
Floor instrument: 60 x 80 x 110 cm
Packaging w x d x h
rotational speed)
Order no.
04.1030.00
The PULVERISETTE 4 grinding in inert gas
Chemistry Insecticides, fertilisers, salts,
Pharmaceuticals Ophthalmological agents, gels, creams, extracts,
GTM
compatible
Metallurgy
Analysis preparation
Ores, Sinters
Spectroscopy, X-ray fluorescence,
INF
15

4/
OR
M
1
AT
I O N PA G E

• Free programming of the grinding parameters, incl. grinding and break times and grinding cycles through PC software
• Real-time display of the rotational speed for monitoring of the grinding process
• WINDOWS™ control and evaluation programme
• Forced air ventilation of the grinding chamber
• Safety interlock of the grinding chamber with standstill monitoring
• Overload protection through rotational speed adjustment
• Maintenance-free drive
• Fault free long service life due to high-performance belt drives and permanently lubricated bearings
• Robust steel housing, service-friendly design
• Membrane keyboard
13
GTM
compatible GTM - Gas Pressure and Temperature
Measuring System
• For use with PULVERISETTE 4, PULVERISETTE 5 and PULVERISETTE 6
• Data evaluation via PC
• Range of pressure build up to 15 m
• Operating time with fully charged battery approx. 80 h
• Adaptation of the measurement rate to the signal dynamic for maximum possible
battery life
• Sleep mode of the radio transmitter with consistent measurement signals
This Gas Pressure and Temperature Measuring Through the continuous direct measurement of gas pressure
and temperature, it is possible to monitor thermal effects
System developed in cooperation with the as well as physical and chemical reactions or pressure
variations within the grinding bowl. To achieve this, the
Fraunhofer Institute for Applied Material Research grinding bowl is simply used with a radio transmitter located
in the lid, without any modification to the mill itself. The
(IFAM) in Dresden, is for use with the Planetary monitored data is passed by a receiver to a computer
running a special WINDOWSTM programme and allows for
Mills PULVERISETTE 4, PULVERISETTE 5 and graphical presentation of the measurement values and
collating them in an ExcelTM table.
PULVERISETTE 6 of the FRITSCH classic line
transform them into analytical measurement
systems.
14
TECHNICAL DATA
• System requirements: Standard WINDOWSTM-PC
• UHF radio transmitter, 10 mW, no approval or fees necessary
• Up to two transmitter components can be operated simultaneously in the mill
• Measurement rate for single and dual transmission operation of up to
approx. 200 measurement value/s
• Pressure measurement range 0 to 800 kPa (8 bar)
• Temperature measurement range of the transmitter component 10 to 70 °C
• Resolution of pressure signal: < 0.024 kPa
• Resolution of temperature signal: 0.025 K
• Permissible transient (-2 s) heat of reaction 30 kJ
• Receiver component also functions as charging station for the batteries of the transmitter component
• Range of pressure up to 15 m
• RS232 connection to PC
• 250 ml or 500 ml bowls made of stainless steel
Y O U R A D VA N TA G E S W I T H G T M
The GTM-System can be used wherever batch quantities are Extremely rapid phase formations can for the first time be
ground in a totally enclosed container. Special grinding bowls obser ved IN SITU as an adiabatic process without heat
made of stainless steel in capacities 250 ml and 500 ml are exchange from the system.
available.
Adjustment of the grinding parameters rotational speed, balls/
The GTM-System provides valuable information sample material ratio and grinding time can be performed first
- Investigations in the area of mechanical alloying for the time without expensive, time-consuming and abortive trials.
production of new amorphous and nano-crystalline materials
- Monitoring and optimisation of grinding processes in industrial Due to precise measurement of reaction times, for example,
applications new materials can be prepared through specific addition of
reaction partners, or produced with special mechano-chemical
Through measurement of the grinding bowl temperature, it is properties.
possible to make an integral statement on temperature as a
process variable that takes account of the effects of all friction,
impact and transformation processes. The continuous and highly
sensitive measurement of the gas pressure in the grinding bowl
allows the detection of very rapid reactions. The measured gas
pressure describes, amongst other things, the interactions of
the gas with the surfaces created during grinding (adsorption
and desorption of gases).
15
GRINDING BOWLS AND GRINDING BALLS
To avoid the risk of contaminating the samples with abrasion from the grinding elements, we offer grinding bowls and grinding
balls in 8 different materials for the FRITSCH classic line. In normal cases, grinding bowls and balls of the same material
are used. To shorten the grinding time, balls with a higher density and correspondingly higher impact energy can be used,
e.g. tungsten carbide balls in a steel bowl or zirconium oxide balls in a silicon nitride bowl.
G assing lid
Through the use of a special lid on the grinding bowl, you can
also grind your samples in inert atmospheres. Two valves
allow for easy and safe filling of the bowls with inert gas while
they are firmly clamped in the mill. A special Additional Lock-
System is required for gas-tight removal and transportation
(see below).
ADDITIONAL LOCK-SYSTEM
With this special Additional Lock-System, you can gas-tight

seal your grinding bowls for transport between filling in the
glove box and the mill. With an additional adapter, it can
also be used for small grinding bowls.
16
T E C H N I C A L D ATA
Material Data for Grinding Bowls/Grinding Balls

Material Main component of the material* Density g/cm3 Abrasion resistance Use for material to be ground
Agate SiO2 2.65 Good Soft to medium-hard samples
Sintered corundum Al2O3 3.8 Fairly good Medium-hard, fibrous samples
Silicon nitride Si3N4 3.25 Excellent Abrasive samples, iron-free grinding
Zirconium oxide ZrO2 5.9 Very good Fibrous, abrasive samples
Stainless steel Fe – Cr – Ni 7.8 Fairly good Medium-hard, brittle samples
Tempered steel Fe – Cr 7.9 Good Hard, brittle samples
Hardmetal tungsten carbide WC 14.95 Very good Hard, abrasive samples
Polypropylene disposable bowl

0.9 For homogenisation
(only for PULVERISETTE 7 classic line)
* At www.fritsch.de, you can find the corresponding element analyses with detailed information about the materials.
Recommended Bowl Filling
I. Grinding balls > 5 mm: Recommended number of balls per grinding bowl
Grinding Bowl / 12 ml 45 ml 80 ml 250 ml 500 ml

Useful capacity (sample volume) 0.5 – 5 ml 3 – 20 ml 10 – 30 ml 30 – 125 ml 80 – 225 ml
Balls diameter
40 mm 4
30 mm 6 8
20 mm 5 15 25
15 mm 7 10 45 70
10 mm 6 18 25 50 100
5 mm 50 180 250 1200 2000
II. Grinding balls > 3 mm: Recommended ball mass per grinding bowl in grams
Grinding Bowl / 12 ml 45 ml 80 ml 250 ml 500 ml

Useful capacity (sample volume) 0.5 – 5 ml 3 – 20 ml 10 – 30 ml 30 – 125 ml 80 – 225 ml
Material
Zirconium oxide 20 70 100 400 800
Tempered steel 30 90 150 500 1100
Hardmetal tungsten carbide 50 200 300 1000 2100
Grinding balls with a diameter of 3 mm or less must be weighed out. The above table provides you with the required mass per grinding bowl.
The quantity of grinding balls may be reduced by up to 15%; but, increased abrasion will occur. The specified number/mass of balls per bowl is the minimum quantity; depending
on the material properties, it may need to be increased.
In normal cases, grinding bowls and balls of the same material are used. To shorten the grinding time, larger or heaver balls with higher density can be used, e.g.: Tungsten
carbide balls in a steel bowl or zirconium oxide balls in a silicon nitride bowl.
17
O R D E R I N G D ATA
Order No. Article Order No. Article
PLANETARY MILLS classic line GRINDING BOWL WITH LID AND SEAL RING classic line

PLANETARY MILL pulverisette 5 Grinding bowl 500 ml volume
Instrument without grinding bowls and balls, incl. Safe-Lock for pulverisette 4, pulverisette 5 and pulverisette 6
clamping system 50.1050.00 Agate
• with 4 grinding bowl fasteners 50.1060.00 Sintered corundum (99.7% Al2O3)
05.5000.00 For 100-120/200-240 V/1~, 50-60 Hz, 1300/1600 watt* 50.1310.00 Silicon nitride, with steel casing
• with 2 grinding bowl fasteners 50.1110.00 Zirconium oxide
05.6000.00 For 100-120/200-240 V/1~, 50-60 Hz, 1300/1600 watt* 50.1100.00 Stainless steel
50.1090.00 Tempered steel
50.1010.20 Replacement seal ring PTFE 110/101 mm diameter for silicon nitride
grinding bowls
50.1230.20 Replacement seal ring PTFE 116/100 mm diameter for all other grin-
ding bowls
Grinding bowl 250 ml volume

for pulverisette 4, pulverisette 5 and pulverisette 6
50.2055.00 Agate, with steel casing
PLANETARY MONO MILL pulverisette 6 50.2060.00 Sintered corundum (99.7% Al2O3)
Instrument without grinding bowls and balls, incl. Safe-Lock 50.2310.00 Silicon nitride, with steel casing
clamping system 50.2110.00 Zirconium oxide
06.2000.00 For 100-120/200-240 V/1~, 50-60 Hz, 1100 watt* 50.2100.00 Stainless steel
50.2080.00 Hardmetal tungsten carbide, with steel casing
50.2010.20 Replacement seal ring PTFE 85/76 mm diameter for agate and silicon
nitride grinding bowls
50.2230.20 Replacement seal ring PTFE 90/75 mm diameter for all other grinding
bowls

for pulverisette 4, pulverisette 5 and pulverisette 6
PLANETARY MICRO MILL pulverisette 7
50.4050.00 Agate
Instrument without grinding bowls and balls, incl. clamping system 50.4060.00 Sintered corundum (99.7% Al2O3)
07.4000.00 For 100-120/200-240 V/1~, 50-60 Hz, 880 watt* 50.4310.00 Silicon nitride
50.4110.00 Zirconium oxide
50.4100.00 Stainless steel
50.4080.00 Hardmetal tungsten carbide, with steel casing
50.4230.20 Replacement seal ring PTFE 80/65 mm diameter for all grinding bowls
90.1120.09 Adapter (essential, when only one grinding bowl is located in the grinding bowl holder)

VARIO-PLANETARY MILL pulverisette 4 for pulverisette 4 and pulverisette 7
Instrument without grinding bowls and balls, incl. clamping system 50.7050.00 Agate
04.1030.00 For 400 V/3~, 50-60 Hz, 6000 watt 50.7060.00 Sintered corundum (99.7% Al2O3)
The PULVERISETTE 4 can only be operated on a three-phase supply 50.7310.00 Silicon nitride
network. 50.7110.00 Zirconium oxide
50.7080.00 Hardmetal tungsten carbide
50.7200.00 Polypropylene disposable bowl (only for pulverisette 7 classic line)
07.3280.13 Bowl adapter for disposable bowl (only for pulverisette 7 classic line)
50.7250.20 Replacement seal ring PTFE 50/40 mm diameter for all grinding bowls

* The voltage specified in the order is set. for pulverisette 4 and pulverisette 7
50.5050.00 Agate
50.5060.00 Sintered corundum (99.7% Al2O3)
50.5310.00 Silicon nitride
GTM - GAS PRESSURE AND TEMPERATURE MEASURING SYSTEM 50.5100.00 Stainless steel
50.2510.00 Incl. 250 ml grinding bowl made of stainless steel with special lid, 50.5080.00 Hardmetal tungsten carbide
transmitter and separate receiver 50.5250.20 Replacement seal ring PTFE 37/26 mm diameter for all grinding bowls
50.2540.00 Incl. 500 ml grinding bowl made of stainless steel with special lid,
transmitter and separate receiver
ACCESSORIES FOR GRINDING IN INERT GAS AND FOR MECHANI-
GTM CAL ALLOYING
compatible
assing lid with 2 valves and seal ring for grinding bowls 500 ml
G
50.8000.00 Agate
If further grinding bowls and transmitters are required, please ask! 50.8400.00 Tempered steel
50.1230.16 Replacement seal ring Viton for gassing lid
Gassing lid with 2 valves and seal ring for grinding bowls 250 ml
50.8100.00 Agate
50.2010.16 Replacement seal ring Viton for gassing lid for agate and silicon nitride
grinding bowls
50.2230.16 Replacement seal ring Viton for gassing lid for all other grinding bowls
Gassing lid with 2 valves and seal ring for grinding bowls 80 ml
50.8810.00 Agate
50.4230.16 Replacement seal ring Viton for gassing lid
90.1400.00 Additional lock-system for all grinding bowls 500 ml, 250 ml, 80 ml
volume (for the transport of the closed grinding bowl with gassing lid)
18
Test our
Order No. Article
GRINDING BALLS (PER PIECE)
Grinding balls 40 mm diameter
instruments
in practice!

55.0300.05 Agate, polished
If you would like to be convinced of
55.0300.31 Silicon nitride the performance and ease of use
55.0300.10 Stainless steel of FRITSCH Planetary Mills, we
55.0300.08 Hardmetal tungsten carbide would be happy to call on you with
Grinding balls 20 mm diameter the FRITSCH mobile laboratory and
55.0200.06 Sintered corundum (99.7% Al2O3) provide you with on-site practical
55.0200.27 Zirconium oxide demonstrations.

Alternatively, send us your samples for
a free grinding trial after which we will
55.0150.27 Zirconium oxide submit a fully documented grinding
55.0150.09 Tempered steel report identifying the most suitable
instrument and accessories to meet
55.0100.05 Agate, polished your requirements.
55.0100.10 Stainless steel A comprehensive collection of
55.0100.08 Hardmetal tungsten carbide grinding reports for various materials
and industries can also be found
online at www.fritsch.de under the
55.0050.08 Hardmetal tungsten carbide menu item Sample Preparation /

Solutions.
GRINDING BALLS > 3 MM IN DIAMETER (100-G PACKAGE)
55.0030.27 Zirconium oxide 3 mm
55.0020.27 Zirconium oxide 2 mm It‘s worth to take a look!
55.0015.27 Zirconium oxide 1.5 mm
55.0010.27 Zirconium oxide 1 mm
55.0030.10 Stainless steel 3 mm

55.0010.10 Stainless steel 1 mm

55.0030.09 Tempered steel 3 mm
55.0010.09 Tempered steel 1 mm

55.0030.08 Hardmetal tungsten carbide 3 mm
55.0016.08 Hardmetal tungsten carbide 1.6 mm
55.0006.08 Hardmetal tungsten carbide 0.6 mm
Scheduling and information
+49 67 84 70 0
www.fritsch.de
Technical specifications are subject to change without notice. 19
Jaw Crushers and Disk Mills · classic line
IDEAL FOR
PRE-, FINE- AND ULTRA-FINE-GRINDING
OF HARD AND BRITTLE MATERIALS IN
THE AREAS
- GLASS AND CERAMICS INDUSTRY
- MINING AND METALLURGY
- GEOLOGY AND MINERALOGY classic line
- CHEMICAL INDUSTRY
- SOIL RESEARCH
JAW crUshErs
DisK Mills
fritsch Jaw
Backenbrecher
Crushers and
· Scheibenmühlen
Disk Mills · Scheibenschwingmühlen
FRITSCH is an internationally respected manufacturer of application-
oriented laborator y instruments. For more than 80 years, labora-
tories worldwide have relied on our experience, quality, ser vice
FRITSCH . O N E ST E P A H E A D .
and innovation - for fast industrial applications as well as for
especially accurate results in control- and research laboratories.
See for yourself.
2
fA s t c O M M i N U t i O N O f h A r D A N D
B r i t t l E M At E r i A l s
the compact pre-crusher

fritsch Jaw crusher P U l V E r i s E t t E 1 ...................................................... 4–7
Ideal as the classic workhorse for pre-crushing of brittle materials in the areas of mining and metallurgy,
chemistry, geology and mineralogy, glass industry, ceramics industry, rocks and soils.
high final fineness for large quantities

fritsch Disk Mill P U l V E r i s E t t E 1 3 ......................................................... 8 – 11
Particularly ideal for medium particle sizes in the areas of mining and metallurgy, glass industry,
ceramics industry, soil research, rocks and soils.
Powerful combination – pre- and fine-crushing in a single step

fritsch Jaw crusher P U l V E r i s E t t E 1
and Disk Mill P U l V E r i s E t t E 1 3 ................................................................... 12 – 13
Ideal for fast, continuous pre- and fine-grinding of large quantities, including coarse materials, down
to analytical fineness in the areas of mining and metallurgy, chemistry, geology and mineralogy, glass
industry, ceramics industry, soil research, rocks and soils.
Extremely short grinding time thanks to fritsch technology

fritsch Vibrating cup Mill P U l V E r i s E t t E 9 ............................................. 14 – 17
Ideal for fast sample preparation, such as in the areas of spectroscopy preparation, ore and geology
laboratories, mining and metallurgy, ceramics industry, agriculture and environmental science, infrared
and x-ray fluorescence analysis.
Preparation of solid and high-quality pellets

fritsch Pellet Press ................................................................................................
18
Manual hydraulic Pellet Press for the preparation of pellets with a smooth, homogeneous surface
for spectral analyses such as X-ray fluorescence analysis or infrared spectroscopy for elementary
analysis.
instrument feed size final fineness down to

Jaw Crusher PULVERISETTE 1, model I 60 mm 1 mm
Jaw Crusher PULVERISETTE 1, model II 95 mm 1 mm
Disk Mill PULVERISETTE 13 20 mm 0.1 mm
Jaw Crusher PULVERISETTE 1, model I 60 mm 0.1 mm
in combination with the Disk Mill PULVERISETTE 13
Jaw Crusher PULVERISETTE 1, model II 95 mm 0.1 mm
in combination with the Disk Mill PULVERISETTE 13
Vibrating Cup Mill PULVERISETTE 9 12 mm 0.01 mm
Pellet Press: for the preparation of pellets in a diameter of 32 or 40 mm with a pressure force of up to 250 kN
3
fritsch Jaw Crushers
P U LV E R I S E T T E 1
classic line
t h E c O M PA c t P r E - c r U s h E r
• Very fast, uniform comminution
• Feed size up to 95 mm, final fineness 1–15 mm
• Extremely fast and easy cleaning
• Extremely robust even for very hard materials
• Especially simple crushing jaw removal
• Safe and dust-free operation
• Adaptable crushing jaw kinematics for higher final fineness
the compact fritsch Jaw crusher PUlVErisEttE 1 classic

line is the ideal instrument for fast and effective pre-crushing
of hard and very hard brittle materials – even ferrous alloys
are no problem for this instrument! choose according to Saves time and energy: the especially
your tasks: two different models for various feed sizes and simple crushing jaw removal takes only
sample quantities are available. seconds and requires only two hand
motions to ensure particularly simple
The power ful comminution of the sample takes place in cleaning – fast and thorough.
the Jaw Crusher under high pressure between one fixed
and one movable crushing jaw in an enclosed grinding
chamber. The final fineness is easily set from the outside
with the 10-stage adjustable gap width between the cru-
shing jaws. The ground sample automatically falls down-
ward – into a drawer for batchwise comminution or via
a chute into a larger collection container for continuous
operation or directly into a FRITSCH Disk Mill PULVERI-
SETTE 13 classic line for further comminution.
The especially simple cleaning of the

FRITSCH Jaw Crusher PULVERISETTE 1
classic line saves time and offers ef-
fective contamination protection for
your samples.
4
The funnel of the FRITSCH Jaw Crusher
PULVERISETTE 1 classic line is particularly
accessible, quickly and easily filled even with
larger sample quantities and easy to clean.
Its design enables the crushed material to
be automatically conveyed into the crushing
chamber – blockages are practically impos-
sible.
A practical plexiglas cover for optical inspec-
tion of optimum material flow.
For simple and fast releasing of the fixed

crushing jaw. The crushing jaw can be re-
moved for cleaning quickly and easily with
just 2 hand motions.
Gap width adjustment for setting the distance

between the crushing jaws – and therefore
setting the final fineness.
The kinematics – in other words, the move-

ment between the movable and fixed crushing
jaws – of the FRITSCH Jaw Crusher PULVERI-
SETTE 1 classic line can be easily adapted to
the breaking characteristics of the respec-
tive sample: Select the upward and down-
ward movement of the movable crushing jaw
relative to the fixed one in order to receive a
sample in a narrow particle size range. For a
fast comminution, please select the nearly
circular motion.
The practical collecting vessel for batchwise

comminution is particularly easy to remove.
Especially safe and dust-free: The enclosed grinding chamber prevents users
from reaching inside and ensures a safe and dust-free operation of all moving
parts. An integrated connection makes it very simple to combine the instru-
ment with a dust exhaust system for automatic removal of the fine dust arising
View of the grinding chamber with the during grinding. The dust exhaust system is also very useful when cleaning
housing removed the grinding parts.
5
fritsch Jaw Crushers
classic line
OUr sUggEstiON
Double the service life of your crushing jaws – they can be easily
turned around on the FRITSCH Jaw Crusher PULVERISETTE 1 classic line.
select the right material combination! rohs (restriction of the use of certain hazardous substances)
For the comminution of RoHS samples – such as for the XRF
The crushing jaws and lateral support walls of the FRITSCH analysis – crushing jaws and support walls made of chromium-
Jaw Crusher PULVERISETTE 1 classic line are available in free steel are particularly well suited.
6 different materials in order to avoid undesired contami-
nation due to material abrasion. The standard version is iron-free pre-crushing
equipped with fixed and movable crushing jaws as well as For completely iron-free pre-crushing of medium-hard brittle
lateral support walls made of tempered steel. samples, for example in the ceramics industry, we can
Normally, crushing jaws and support walls of the same mate- equip your FRITSCH Jaw Crusher PULVERISETTE 1 classic
rial are used. Since the lateral support walls are subject to line with crushing jaws made of zirconium oxide, lateral
low stresses, however, the standard lateral support walls support walls in zirconium oxide or aluminium, and with a
made of tempered steel can often be retained. special PVC funnel. So you will have absolute protection
against iron contamination, such as for dental ceramics.
MAtEriAl DAtA fOr crUshiNg JAWs AND sUPPOrt WAlls

steel crushing jaws with a grooved surface
Material Main component Abrasion Use for material to
of the material* resistance be ground If required, we can equip your PULVERISETTE 1 classic line,
Tempered steel Fe – Cr Good Brittle, very hard samples
Stainless steel Fe – Cr – Ni Fairly good Medium-hard, brittle samples model II, with fixed and movable crushing jaws in steel with
Chromium-free steel Fe Good Medium-hard samples a grooved surface, which have a different influence on par-
Manganese steel Mn – Fe Good Hard, brittle samples
Hardmetal tungsten WC Very good Hard, abrasive ticle shape and particle size distribution.
carbide samples
Zirconium oxide¹) ZrO2 Good Medium-hard, brittle
samples, iron-free grinding
Aluminium Al Fairly good Medium-hard, brittle
samples, iron-free grinding
*
At www.fritsch.de, you can find the corresponding element analyses with
detailed information about the materials.
1)
Crushing jaws of zirconium oxide are only suitable for crushing ceramic
materials, minerals, etc. and never for hard-tough samples, such as metals.
6
tEchNicAl DAtA
Electrical details
irON-frEE griNDiNg Model I, 400 V/3~, 50-60 Hz, 1450 watt
Model I, 230 V/1~, 50-60 Hz, 1570 watt
For iron-free grinding, use the practical Model I, 115 V/1~, 50-60 Hz, 1900 watt
Model II, 400 V/3~, 50-60 Hz, 2780 watt
PVC funnel. Motor shaft power in accordance with VDE 0530, EN 60034
Model I, 1.1 kW
Model II, 2.2 kW
Weight
Model I, net 177 kg, gross 202 kg
Model II, net 205 kg, gross 230 kg
Model I and model II, bench top instrument 40 x 80 x 80 cm
Packaging w x d x h
Model I and model II, wooden case 90 x 75 x 90 cm
Emissions value of workplace
according to DiN EN isO 3746:2005
Approx. 85 dB(A)
(depending on the material to be crushed)
Order no. 400 V/3~ 230 V/1~ 115 V/1~
Model I 01.5030.00 01.5020.00 01.5010.00
Model II 01.7030.00
Powerful: Coarse basalt rock crushed by the PULVERISETTE 1 classic line (model I)
at gap position 2 to the final fineness shown in the collecting vessel on the right.
APPlicAtiON EXAMPlEs
Mining and metallurgy Niobium-titanium, ferrovanadium, chrome vanadium,
tungsten carbide, ores, coal, slag, coke
chemistry Wide variety of various raw materials
geology and mineralogy Granite, basalt, barite, silicates and other rocks
glass industry Frits, glass, raw materials
ceramics industry Dental ceramics, steatite, fire-clay, sintered ceramics,
electrotechnical porcelain
rocks and soils Bauxite, clinker, quartz, concrete
fActs AND ADVANtAgEs Model I resp. model II
Working principle Pressure

Bearings Needle and spherical roller bearings
Instrument with fixed and movable crushing jaw and lateral support walls of
standard equipment
tempered steel
Optimal for material type Hard, medium-hard, brittle
Max. feed size (depending on the material) 60 mm resp. 95 mm
Min. sample quantity 20 ml
Max. continuous throughput
140 kg/h resp. 200 kg/h
(depending on material and gap width)
final fineness 1 – 15 mm
feeding Batchwise/continuous
grinding parts Fixed and movable crushing jaws
Eccentric oscillations 308 movements/min
conformity CE mark
guarantee 2 years
7
fritsch Disk Mill
classic line
high fiNAl fiNENEss fOr lArgE QUANtitiEs

• High throughput up to 150 kg/h
• Fine grinding down to 0.1 mm
• Fast, easy cleaning
• Simple operation
• Fast grinding disk change
• Precision setting of the final fineness even during grinding
• High service life due to generously dimensioned bearings
the especially heavy and solid fritsch Disk Mill PUl-

VErisEttE 13 classic line is the ideal instrument for
fine grinding of up to 150 kg per hour of hard-brittle
and medium-hard solids – even in continuous opera-
tion. the maximum feed size per piece is approximately
20 mm edge length, the final fineness is freely adjustable
between 12 mm and 0.1 mm.
The material to be ground is comminuted by pressure and

shearing action between two counteracting grinding disks with Especially time saving: The grinding
coarse interlocking teeth. The ground material automatically chamber can be completely opened
falls down through an output gap into the collection drawer. which makes cleaning especially simple
The desired final fineness can be defined from the outside and the grinding disks are very easily
by changing the gap width. accessible for changing.
8
Especially accurate: The precision sliding
table of the FRITSCH Disk Mill PULVERI-
SETTE 13 classic line for precise gap
setting with an accuracy of 0.1 mm – for
rapid, precise operation and exactly repro-
ducible grinding results.
Especially safe: The centrally located ten-

sion lock of the grinding chamber
Especially convenient: Easy gap width

check from the outside (e.g. with thickness
gauge)
• Especially solid: The thick-walled housing of the FRITSCH PULVERISETTE 13 classic

line consists of recyclable grey cast iron.
• Especially clean: The connecting piece (optional) for a dust exhaust system really
simplifies the automatic removal of fine dust occuring during grinding and is even an
optimal aid for cleaning the grinding parts.
9
fritsch Disk Mill
classic line
OUr sUggEstiON
Lengthen the service life of the grinding disks in your
FRITSCH Disk Mill by simply changing the rotational direction
of the maintenance-free three-phase geared motor.
select the appropriate grinding disks high final fineness in minimum time
For every FRITSCH Disk Mill PULVERISETTE 13 classic line, With the FRITSCH PULVERISETTE 13 classic line, you can
you need at least one fixed and one movable grinding disk, achieve high final finenesses in a very short grinding time.
which are available in various materials. We have listed some examples here – always in refer-
Normally, two grinding disks of the same material are ence to 1 kg feed quantity and 20 mm particle size and
selected, which must always be harder than the sample arranged by material types from hard to medium-hard.
to be ground.
Material to grinding time gap setting fineness throughput
be ground (min) (mm) (µm) kg/h
MAtEriAl DAtA fOr fiXED AND MOVABlE griNDiNg DisKs 90 % < x 50 % < x
Material Main component Abrasion Use for material to Basalt 2.1 1.0 600 28
of the material* resistance be ground 3.5 0.1 220 60 17
Hardened cast steel Cr – Fe Good Hard, brittle samples Clinker 2.0 0.5 900 450 30
Manganese steel Mn – Fe Good Very hard, brittle 10.0 0.1 220 60 6
samples Slate 1.4 1.0 1500 45
Hardmetal tungsten WC Very good Very hard, abrasive 2.2 0.1 300 90 27
carbide samples Hard coal 3.5 1.0 800 17
Zirconium oxide1)
ZrO2 Good Medium-hard, brittle 13.5 0.1 250 100 4
samples, iron-free Limestone 2.0 1.0 1000 420 30
grinding 6.3 0.1 210 100 10
Thomas meal (potash) 1.3 1.0 1000 350 45
*
At www.fritsch.de, you can find the corresponding element analyses with 2.3 0.5 350 150 36
detailed information about the materials. Pumice stone 3.5 0.5 600 250 17
1)
Grinding disks of zirconium oxide are only suitable for grinding ceramic 5.0 0.1 150 30 12
materials, minerals, etc. and never for hard-tough samples, such as metals. Glass 2.5 3.0 4000 2240 25
3.3 2.0 2500 1600 18
3.8 1.0 1400 800 16
The indicated results are to be considered as an orientation guide, since the

chemical and physical properties (e.g. residual moisture, morphology, etc.) can
vary even with the same material to be ground.
10
tEchNicAl DAtA
irON-frEE griNDiNg Electrical details
400 V/3~, 50-60 Hz, 1830 watt
For completely iron-free grinding of hard-brittle and medium-hard solid samples, Motor shaft power in accordance with VDE 0530, EN 60034
1.5 kW
for example for dental ceramics, we can equip your FRITSCH Disk Mill Weight
Net 140 kg
PULVERISETTE 13 classic line with a thorough polymer interior coating – Gross 170 kg
together with grinding disks made of zirconium oxide – an absolutely Bench top instrument 44 x 87 x 40 cm
Packaging w x d x h
reliable protection against iron contamination. Wooden case 100 x 52 x 70 cm
Approx. 89 dB(A)
(depending on the material to be ground)
Order no.
13.1030.00
Filling of the funnel with pre-crushed glass Grinding result with a gap width of 1 mm
bottles
Mining and metallurgy Ores, coal, coke, slags
ceramics industry Steatite, sintered ceramics, electrotechnical porcelain,
fire-proof clay, dental ceramics
rocks and soils Bauxite, slags, quartz, clinker, gypsum, chalk
glass industry Frits, different glass types, raw materials
soil research Dried soil samples, sewage sludge, hydrological sedi-
ments, drilling cores
fActs AND ADVANtAgEs
Working principle Shearing

Bearings Needle and double row angular contact ball bearings
Equipment Instrument without grinding disks
Optimal for material type Hard-brittle, medium-hard
Max. feed size (depending on the material) 20 mm
Min. sample quantity 20 – 30 ml
Max. throughput
150 kg/h
(depending on the material)
final fineness 0.1 - 12 mm

feeding Batchwise/continuous
grinding parts Fixed and movable grinding disks
rotating speed of the grinding disk 440 rpm
conformity CE mark
guarantee 2 years
11
fritsch Jaw Crusher and Disk Mill
P U LV E R I S E T T E 1 / 13
classic line
P O W E r f U l c O M B i N At i O N – P r E - A N D
fiNE-crUshiNg iN A siNglE stEP
• Fast, continuous pre- and fine-grinding
• Compact in a single instrument
• Maximum particle size 95 mm
• Minimum final fineness 0.1 mm
for fast, continuous pre- and fine-grinding particularly of Pre- and fine-grinding, with
large quantities of coarse material, the combination of the quartzite stones as example
fritsch Jaw crusher PUlVErisEttE 1 classic line and the

1 Size of the material filling
fritsch Disk Mill PUlVErisEttE 13 classic line is the ideal into the PUlVErisEttE 1
solution. Mounted together onto a rack and connected to Particle size up to 95 mm
each other by a chute, they automatically grind the material
from a particle size of up to 95 mm to a final fineness of
down to 100 µm – fast, easy and effective in a single step!
Select the appropriate grinding parts and the de- 2 Intermediate results of the
PUlVErisEttE 1
sired configuration from the options available for the
Final fineness down to 1 mm
PULVERISETTE 1 and 13 classic line on pages 6–7
and 10–11.
3 Final result of the

PUlVErisEttE 13
Final fineness down to 100 µm
12
irON-frEE PrE- AND fiNE-griNDiNg
The FRITSCH-Combination is also available for completely iron-free
pre- and fine-grinding. Details can be found on page 6.
A connection chute automatically conveys the pre-

crushed material onward for fine grinding.
Mining and metallurgy Ores, coal, coke, slags, niobium-titanium, ferrovanadium,
chrome vanadium, tungsten carbide
geology and mineralogy Granite, basalt, barite, silicates and other rocks
glass industry Frits, glass, raw materials
ceramics industry Steatite, fire-clay, sintered ceramics, electrotechnical
porcelain, dental ceramics
rocks and soils Bauxite, clinker, quartz, concrete, slags, gypsum, chalk
13
fritsch Vibrating Cup Mill
classic line
s t r O N g E r , fA s t E r , B E t t E r
• More power with new drive concept
• Extra-fast grinding with up to 1500 rpm
• Precise adjustment of rotational speed, grinding time and pause periods
• Programming and storage of grinding cycles
• Self-explanatory multilingual menu navigation
• Optimised tensioning of grinding set with anti-rotation lock
• Especially safe hood locking
• Complete soundproof lining
the new, completely modified fritsch Vibrating cup Mill

PUlVErisEttE 9 offers many practical advantages in all
areas in which hard, brittle and fibrous material must be
ground extremely quick down to analytical fineness. Now
with increased grinding power and a completely new drive
concept, even safer and easier to tension the grinding set,
especially quiet, simple to operate and quick to clean.
Easy working Especially light: The grinding sets of the

No similar mill offers a more convenient operation: The new PULVERISETTE 9 are now consider-
working position is ergonomically optimised; the ease ably lighter and are equipped with heat-
of cleaning is without match. The grinding sets are insulated handles.
especially light, and do not have to be placed directly on
the vibrating plate in the centre of the mill. The grinding
set is simply placed on the guide rail and easily moved
to the final position. This protects your back and saves
energy and time. The grinding set is tensioned in seconds
using a well-thought out one-hand lever.
simply clever!
14
Especially ergonomic: The PULVERI-
SETTE 9 grinding sets, which have been
considerably reduced in weight, are placed
at an optimised working height on a
practical guide rail and then easily moved
to the final position.
Especially well-arranged: The Especially intelligent: A special Especially safe: Tensioned in seconds
self-explanator y, multilingual detector automatically detects with one hand and one grip, the com-
menu navigation on the LCD when you use an agate grinding pletely new rapid and anti-twist tension-
display for setting the grinding set for grinding and reduces the ing for the grinding set.
time precisely to the second, rotational speed independently.
the pause periods and the
rotational speed as well as the
programming and storage of
grinding cycles.
15
fritsch Vibrating Cup Mill
classic line
O U R S U GG E STI O N
Grinding sets with high density, e.g. tempered steel
or tungsten carbide, reduce the grinding time.
Select the appropriate grinding set Optimises your grinding process: the FRITSCH-motor with
torque-optimised frequency converter
Grinding sets in 5 different materials and 3 different sizes
from 50 ml to 250 ml volume are available for the FRITSCH In the Vibrating Cup Mill, the grinding is per formed by
PULVERISETTE 9 – for each application the suitable one! horizontal circular oscillations of the grinding set on a vibrating
plate. The grinding set consisting of ring and puck comminute
the grinding sample with extremely high pressure, impact
Material data for the grinding sets
forces and friction. In this form of grinding, the transmission
Material Main component Density Abrasion Use for material to
of the material* g/cm3 resistance be ground of forces onto the grinding sample is much more important
Tempered steel Fe – Cr 7.9 Good Brittle,
hard samples than the pure motor power. For this reason, FRITSCH as the
Chromium-free steel Fe – Cr 7.8 Fairly good Brittle, first provider worldwide, developed for the PULVERISETTE 9
hard samples
Hardmetal tungsten WC 14.3 Very good Very hard, a special motor and now equipped it with an especially
carbide abrasive samples
Agate SiO2 2.65 Good Soft to medium- interference-resistant, torque-optimised frequency converter
hard, brittle, which fulfils all the relevant safety standards worldwide. It
fibrous samples
Zirconium oxide¹) ZrO2 5.9 Good Medium-hard, ensures that the motor output is precisely matched to the
brittle,
fibrous samples, grinding material and grinding set - which optimises the energy
iron-free grinding consumption.
*
t www.fritsch.de, you can find the corresponding element analyses with detailed
A
information about the materials.
1)
Grinding sets of zirconium oxide are only suitable for grinding ceramic materials,
minerals, etc. and never for hard-tough samples, such as metal.
GRINDING MEDIA AND VOLUMES

Volume Useful capacity (sample volume) Grinding parts
50 ml 15 – 50 ml 1 puck
100 ml 30 – 100 ml 1 puck + 1 ring
250 ml 75 – 250 ml 1 puck + 1 ring
16
tEchNicAl DAtA
Electrical Details
230-240 V/1~, 50-60 Hz, 1200 watt
100-120 V/1~, 50-60 Hz, 1200 watt
Motor shaft power in accordance with VDE 0530, EN 60034
1.1 kW
Weight
Net 267 kg
Gross 330 kg
Floor instrument 77 x 76 x 116 cm
Packaging w x d x h
Pallet box 82 x 88 x 147 cm
Approx. 74 dB(A)
(depending on the material to be ground and grinding set)
Order no. 230-240 V/1~ 100-120 V/1~
09.5000.00 09.5001.00
Pressure elements automatically lift the grinding set, the anti-rotation lock tensions
them absolutely safe and the safety switch checks the firm position.
Mining For processing coal, ores or minerals for physical or chemical
analysis
Metallurgy For grinding blast furnace slag or cast iron samples to
determine additives
ceramics industry For grinding rock samples to produce raw powder to determine
CaCO3- and MgO-content or clinkers to study the constancy of
the mineralogical structure
Agriculture and For preparing samples for chemical analysis of soils, sludges
How to go mobile with the Vibrating Cup Mill: On
environment or vegetable samples
request, we can supply the PULVERISETTE 9 on heavy
duty wheels with arresting brake. infrared and X-ray For preparing samples in a short grinding time without
fluorescence analysis contamination due to undesired abrasion.
fActs AND ADVANtAgEs
Working principle Impact

Bearings Ball- and cylindrical roller bearings
Equipment Instrument without grinding set
Optimal for material type Hard, medium-hard, brittle, fibrous
Max. sample quantity 250 ml
final fineness 10 – 20 µm
feeding Batchwise
grinding parts Grinding set with grinding puck and impact ring
Motor speed 600 – 1500 rpm
Useful capacity 50, 100 or 250 ml
conformity CE mark
guarantee 2 years
17
fritsch Jaw Crushers and Disk Mills
PEllEt PrEss O r D E r i N g D AtA

Order no. Article
ideal for high-quality pellets JAW crUshErs classic line
• Pressing tools: 40 mm diameter included, PUlVErisEttE 1, model i
32 mm diameter optional
• Variable pressure force up to 250 kN
• Clearly designed pressure force display in 10 kN steps
• Simple operation via hand lever
• Easy cleaning
• Single-stage piston stroke of max. 25 mm Instrument incl. fixed and movable crushing jaw and lateral support
• Automatic pressure relief in case of overstress walls made of tempered steel
01.5030.00 For 400 V/3~, 50-60 Hz, 1450 watt
• Solid and compact with impact-resistant cladding 01.5020.00 For 230 V/1~, 50-60 Hz, 1570 watt
01.5010.00 For 115 V/1~, 50-60 Hz, 1900 watt
The PULVERISETTE 1 with voltage of „/3~“ can only be operated on
a three-phase supply network.
stable and impact-resistant: The transparent polycarbonate Other voltages on request.
cladding with all-round observation window. Crushing jaws for model I
43.0010.09* Fixed crushing jaw made of tempered steel
43.0020.09* Movable crushing jaw made of tempered steel
43.0030.10 Fixed crushing jaw made of stainless steel
43.0040.10 Movable crushing jaw made of stainless steel
43.0011.09 Fixed crushing jaw made of chromium-free steel
43.0021.09 Movable crushing jaw made of chromium-free steel
43.0130.23 Fixed crushing jaw made of manganese steel
simple: By pressing the hand 43.0140.23 Movable crushing jaw made of manganese steel
lever down, you create a solid, 43.0050.08 Fixed crushing jaw made of hardmetal tungsten carbide
highly permeable pellet for 43.0060.08 Movable crushing jaw made of hardmetal tungsten carbide
further analysis. 43.0100.27 Fixed crushing jaw made of zirconium oxide 1)
43.0110.27 Movable crushing jaw made of zirconium oxide 1)
Lateral support walls for model I

43.0070.09* 1 pair made of tempered steel
43.0080.10 1 pair made of stainless steel
43.0071.09 1 pair made of chromium-free steel
43.0090.08 1 pair made of hardmetal tungsten carbide
43.0150.13 1 pair made of aluminium
43.0160.27 1 pair made of zirconium oxide 1)
Accessories for iron-free pre-crushing for model I

01.5410.00 Funnel PVC incl. clamping strips
(Please note: fixed and movable crushing jaws made of zirconium oxide
and lateral support walls made of zirconium oxide or aluminium are
additionally necessary!)
PUlVErisEttE 1, model ii
the manually-operated hydraulic fritsch Pellet Instrument incl. fixed and movable crushing jaw and lateral support
walls made of tempered steel
Press is ideal for fast and easy preparation of both: 01.7030.00 For 400 V/3~, 50-60 Hz, 2780 watt
The PULVERISETTE 1 with voltage of „/3~“ can only be operated on a
solid and highly permeable pellets of solid samples three-phase supply network.
Other voltages on request.
for X-ray fluorescence analysis or infrared spectros-
Crushing jaws for model II
copy. 43.3010.09* Fixed crushing jaw made of tempered steel
43.3020.09* Movable crushing jaw made of tempered steel
43.3030.10 Fixed crushing jaw made of stainless steel
43.3040.10 Movable crushing jaw made of stainless steel
The pressure force is variable up to max. 250 kN and 43.3011.09 Fixed crushing jaw made of chromium-free steel
43.3021.09 Movable crushing jaw made of chromium-free steel
is automatically relieved in case of overstress. The 43.3130.23 Fixed crushing jaw made of manganese steel
43.3140.23 Movable crushing jaw made of manganese steel
pressing tool for pellets with 40 mm diameter is in- 43.3050.08 Fixed crushing jaw made of hardmetal tungsten carbide
43.3060.08 Movable crushing jaw made of hardmetal tungsten carbide
cluded in delivery, a 32 mm diameter pressing tool 43.3100.27 Fixed crushing jaw made of zirconium oxide 1)
43.3110.27 Movable crushing jaw made of zirconium oxide 1)
is optional.
Fixed and movable crushing jaws made of steel with grooved surface
on request.
It's as easy as this: Fill in the sample, close the mag- Lateral support walls for model II
43.3070.09* 1 pair made of tempered steel
netically-held door and build-up the desired pressure 43.3080.10 1 pair made of stainless steel
43.3071.09 1 pair made of chromium-free steel
using the hand lever - that's it. 43.3090.08 1 pair made of hardmetal tungsten carbide
43.3150.13 1 pair made of aluminium
43.3160.27 1 pair made of zirconium oxide 1)
If your pellets require binding agents for stabilisation, Accessories for iron-free pre-crushing for model II
01.7410.00 Funnel PVC incl. clamping strips
please contact us and we will be happy to assist. (Please note: fixed and movable crushing jaws made of zirconium oxide
and lateral support walls made of zirconium oxide or aluminium are
additionally necessary!)
* Included in the basic price of the instrument; when ordering a deviating specification from the
standard accessories, please specify the exact article number of the replacement part.
18
Order no. Article Order no. Article
AccEssOriEs fOr JAW crUshEr PUlVErisEttE 1, MODEl i + ii cOMBiNAtiON Of JAW crUshEr AND DisK Mill
PUlVErisEttE 1/13 classic line
Dust exhaust system
43.9050.00 Dust exhaust system, dust category "M"
according to DIN EN 60335-2-69
for 230 V/1~, 50-60 Hz, 1000 watt
43.9055.00 Paper filter bag for exhaust system (pack = 5 pieces) 2)
43.9052.00 Plastic bag for exhaust system (pack = 5 pieces) 2)
43.9051.00 Filter set polyester for exhaust system 2)
For continuous operation JAW crUshEr PUlVErisEttE 1 AND DisK Mill PUlVErisEttE 13
43.5100.00 Mounting rack for combined use of the Jaw Crusher PULVERISETTE 1 iN thE DEsirED cONfigUrAtiON
with the Disk Mill PULVERISETTE 13 To order a Combination for fast pre- and fine-grinding in a single step,
Select the desired configuration from the options offered for the order both instruments individually in the desired configuration plus the
PULVERISETTE 13 on pages 10-11. associated mounting rack that combines the instrument into a single
high-performance grinding instrument.
Select the desired configuration from the options offered for the
DisK Mill classic line PULVERISETTE 1 and 13 on pages 6-7 and 10-11.
43.5100.00 Mounting rack for combined use of the Jaw Crusher PULVERISETTE 1
PUlVErisEttE 13 with the Disk Mill PULVERISETTE 13
ViBrAtiNg cUP Mill

PUlVErisEttE 9
Instrument without grinding disks

13.1030.00 For 400 V/3~, 50-60 Hz, 1830 watt
The PULVERISETTE 13 with voltage of „/3~“ can only be operated on a
three-phase supply network.
Other voltages on request.
Instrument without grinding set
09.5000.00 For 230-240 V/1~, 50-60 Hz, 1200 watt
Grinding disks
09.5001.00 For 100-120 V/1~, 50-60 Hz, 1200 watt
13.1100.09 Fixed grinding disk, 200 mm dia., hardened steel cast
13.1110.09 Movable grinding disk, 200 mm dia., hardened steel cast
Grinding sets
13.1120.23 Fixed grinding disk, 200 mm dia., manganese steel
48.5125.00 Tempered steel, useful volume 250 ml
13.1130.23 Movable grinding disk, 200 mm dia., manganese steel
13.2000.08 Fixed grinding disk, 200 mm dia., hardmetal tungsten carbide
13.2010.08 Movable grinding disk, 200 mm dia., hardmetal tungsten carbide
48.5525.00 Chromium-free steel, useful volume 250 ml
13.2100.27 Fixed grinding disk, 200 mm dia., zirconium oxide 1)
13.2110.27 Movable grinding disk, 200 mm dia., zirconium oxide 1)
48.5225.00 Hardmetal tungsten carbide, useful volume 250 ml
Accessories for iron-free grinding
13.1090.16 Thorough polymer coating inside of grinding chamber
(Please note: fixed and movable grinding disks made of
48.5310.00 Agate, useful volume 100 ml
zirconium oxide are additionally necessary!)
48.5305.00 Agate, useful volume 50 ml
48.5410.00 Zirconium oxide 1), useful volume 100 ml
Dust exhaust system
48.5405.00 Zirconium oxide 1), useful volume 50 ml
43.9050.00 Dust exhaust system, dust category "M"
according to DIN EN 60335-2-69
93.4365.00 Wheels for Vibrating Cup Mill
for 230 V/1~, 50-60 Hz, 1000 watt
(1 set = 4 heavy-duty wheels, 2 with arresting brake)
13.1450.00 Connecting piece for dust exhaust system
43.9055.00 Paper filter bag for exhaust system (pack = 5 pieces) 2)
43.9052.00 Plastic bag for exhaust system (pack = 5 pieces) 2)
43.9051.00 Filter set polyester for exhaust system 2)
PEllEt PrEss
For continuous operation

43.5100.00 Mounting rack for combined use of the Jaw Crusher PULVERISETTE 1
with the Disk Mill PULVERISETTE 13
Select the desired configuration from the options offered for the
PULVERISETTE 1 on pages 6-7.
Instrument incl. pressing tools

1)
Grinding disks of zirconium oxide are only suitable for grinding ceramic materials, 09.9500.00 Pellet Press, hydraulic, manual
minerals, etc. and never for hard-tough samples, such as metals. complete with pressing tool for pellets with 40 mm diameter,
2)
One pack/one piece is included in the order of the exhaust system. pressure force 250 kN
09.9600.00 pressing tool for pellets with 32 mm diameter
Technical specifications are subject to change without notice. 19

Sample Preparation
PRODUCTOVERVIEW
MILLING SIEVING DIVIDING

FRITSCH.
ONE STEP
AHEAD.
FRITSCH is an internationally respected manufacturer of
application-oriented laboratory instruments. Laboratories
worldwide rely on our quality, our experience, our consultation
and our ser vice – for fast industrial applications as well
as for especially accurate results in control- and research
laboratories.
WHEN WILL YOU JOIN US?
F R I T S C H PA R T I C L E S I Z I N G
For over 25 years, FRITSCH is also the right choice in the area of high-tech
particle technology: for particle size determination in the convergent laser
beam or by means of dynamic light scattering (DLS) as well as for analysis
of particle shape and size with dynamic image analysis. For exact, reliable
and reproducible results down to the lower nanometer range. Of course, in
the typical FRITSCH quality for easy, fast and reliable particle size analysis.
Catch up on the state-of-the-art particle technology by FRITSCH!
www.fritsch-sizing.com
2
CONTENTS
S E R V I C E A N D C O N S U L T A T I O N ......................... 4 – 5
FRITSCH helps you quickly and easily to find exactly the right laboratory
instrument for your application – including a free sample grinding. Benefit
from our decades of experience.
M I L L I N G ........................................................................... 6 – 23
FRITSCH-high per formance mills are the laborator y standard around
the world – as Planetary Mills, Ball Mills, Cutting Mills, Rotor Mills,
Beater Mills, Jaw Crushers, Disk Mills and Mortar Grinders for specific
applications.
S I E V I N G ......................................................................... 24 – 25
FRITSCH Sieve Shakers offer ease of use and guarantee precise,
reproducible sieve analysis.
D I V I D I N G ....................................................................... 26 – 27
FRITSCH instruments are second to none for dividing, feeding and ease
of cleaning adding to the performance of your mills, sieve shakers and
particle sizers. They are your guarantee for accurate reproducible sample
preparation.
www.fritsch.de
3
FRITSCH Service and Consultation
Yet another essential side of FRITSCH: Detailed consultation and comprehensive service –
practically anywhere in the world. To help you find exactly the right laboratory instruments
for your specific applications without long drawn out costly investigations – it’s our aim to
provide reliable solutions to questions about laboratory technology in our field of expertise.
TEST US – WE
F R E E S A M P L E G R I N D I N G A N D A N A LY S I S
Finding the right mill can be so easy: Simply send us a sample of your choice – we will perform a
free grinding or particle size analysis and send you a detailed grinding/size analysis report.
O N - S I T E T E S T I N T H E M O B I L E L A B O R AT O R Y
Test the FRITSCH instruments with your own samples – practically and simply in our fully
equipped laboratory bus. Simply schedule a date and we will drive by.
TRAINING AND WORKSHOPS

We share our expertise – at regular workshops and seminars on your site or at convenient
locations worldwide. Ask us about them!
4
A R E P R E PA R E D !
T E C H N I C A L A P P L I C AT I O N C O N S U LT AT I O N
We will advise you on all technical application questions: via phone or personally. Or meet with
us at major national and international fairs and exhibitions.
LONG-TERM MAINTENANCE AND REPL ACEMENT PART S SERVICE

We ensure optimal long-term use of your FRITSCH laboratory instruments with competitive
maintenance contracts and a delivery guarantee for all important spares for at least 10 years
– to maximise the security of your investment.
WORLD-WIDE SERVICE
Wherever you are: FRITSCH is always nearby. With a global network of international
representative offices employing highly trained staff offering: application consultation, advice
on installation, maintenance and repair.
5
FRITSCH Milling
T H E RIGHT M IL L
F O R FIRST-RATE A N A LYSIS
E N S U R E T H E Q U A L I T Y O F Y O U R A N A LY S I S B Y C H O O S I N G
THE RIGHT MILL
The quality of every product or material analysis depends on For this reason, FRITSCH offers a wide selection of high-
the quality of the sample preparation. It is therefore extremely per formance mills in various product groups for ever y
important to consider all the individual milling parameters in application and every specific need: Planetary Mills premium
order to make an informed choice: material properties, feed line and classic line, Ball Mills, Cutting and Rotor Mills, Jaw
size and volume of the sample, grinding time and desired final Crushers, Disk Mills and Mortar Grinders.
particle size, any abrasion of the grinding parts – all these
factors are significant. And of course the costs.
T H E R I G H T M I L L F O R E V E R Y M AT E R I A L
For a simple orientation, you can find the recommended mills for the most common material categories in this brochure.
More detailed information offers the practical grinding report database at www.fritsch.de/solutions. There you will find
comparison grindings with detailed information.
O R S I M P LY G I V E U S A C A L L – O U R E X P E R T S W I L L B E H A P P Y T O A S S I S T Y O U .
+49 67 84 70 - 150 (direct line) · [email protected]
6
M AT E R I A L TA B L E
Abrasives Ball Mills, Planetary Mills, P-9 Lime Ball Mills, Planetary Mills, P-2
Alloys Ball Mills, Planetary Mills, P-1 Materials research Planetary Mills, P-4, P-5
Analysis Ball Mills, Planetary Mills, P-14 Mechanical alloying/ Planetary Mills, P-4
Animal fodder Cutting Mills, P-0, P-23 activation
Biology Ball Mills, Planetary Mills, Cutting Mills Metallurgy Planetary Mills, P-1, P-9
Bones P-19, P-25, P-0 Minerals Ball Mills, Planetary Mills, P-1, P-13, P-9
Building materials Ball Mills, Planetary Mills, P-1, P-13, P-9 Mining Ball Mills, Planetary Mills, P-1, P-13, P-9
Catalysts Ball Mills, Planetary Mills, P-1 Ores Ball Mills, Planetary Mills, P-1, P-13, P-9
Cement clinker Ball Mills, Planetary Mills, P-1, P-13, P-9 Pharmaceuticals P-14, P-2
Ceramics Ball Mills, Planetary Mills, P-1, P-13, P-9 Pigments Ball Mills, Planetary Mills, P-2
Coal Ball Mills, Planetary Mills, P-16, P-1, P-13 Plants Cutting Mills, P-2, P-14
Coating powder Ball Mills, Planetary Mills, P-14 Plastics Cutting Mills, P-14
Compound materials Cutting Mills, P-25/P-19 Combination, P-14 Refractory Ball Mills, Planetary Mills, P-1, P-13, P-9
Drugs Ball Mills, Planetary Mills, Cutting Mills materials
Electronic scrap Cutting Mills, P-0, P-14 Rocks Ball Mills, Planetary Mills, P-1, P-13, P-2, P-9
Environment Cutting Mills, P-0, P-23 RoHS Cutting Mills, P-0, P-9, P-14
Feed (pellets) Cutting Mills, P-2, P-14 Rubber Cutting Mills, P-14
Fertilisers Ball Mills, Planetary Mills, P-14, P-2 Sediments Ball Mills, Planetary Mills, P-2, P-9
Fibres Ball Mills, Planetary Mills, P-1, P-13, P-9 Slags Planetary Mills, P-1, P-9
Foils Cutting Mills Soil research Ball Mills, Planetary Mills, P-1, P-13
Food Ball Mills, Planetary Mills, Cutting Mills, P-2 Spectroscopy Ball Mills, Planetary Mills, P-14
Glass Ball Mills, Planetary Mills, P-1, P-13, P-9 Spices Cutting Mills, P-14
Grains Cutting Mills, P-14 Tablets Ball Mills, Planetary Mills, P-2
Household waste Cutting Mills, P-25/P-19 Combination Textiles Cutting Mills
Leather Cutting Mills Wood Cutting Mills, P-14
M AT E R I A L T Y P E S – D E F I N I T I O N
Every FRITSCH mill is suitable for specific material types as shown in the product tables on the following pages. We
have also summarised the material types for the most common materials, as an additional service for you.
Material Material Type

Slag, alloys, granite, porphyry, iron ore Hard-abrasive
Clinker, quartz, rock, bauxite, ceramics, carborundum Hard-brittle
Glass, cement, calcite, coal, ash, sewage sludge, catalysts, soil, polluted land Medium-hard
samples, tablets, fertilisers, pellets
Grain, gypsum, salts, talc, animal feed, graphite, leaves, grass, pigments, Soft
spices, dragées, mica
Alloys, ceramics, salts, tablets, silicon carbide, silicon nitride, coke, coal, Brittle
embrittled, e.g. with liquid nitrogen: plastics, duroplast, rubber, perspex
Leather, hides, rubber Tough
Wool, resins, wood, cellulose, paper, plant roots Fibrous
Thermoplastics, pharmaceuticals Temperature-sensitive
Soil, grass, hay, leaves Moist
7
FRITSCH premium line and classic line
The FRITSCH
premium principle
Making the best even better: With the FRITSCH premium principle we go one step
further – because even proven and well-tried laboratory mills can always be improved, especially
in detail. Therefore we listened intensively to our customers and continuously collected sugges-
tions for improvement from their daily practical work. This has resulted in the creation of new
instrument concepts that raise our own standards: the FRITSCH premium line is growing.
Due to increased performance all models of the FRITSCH premium line are more powerful than comparable
instruments. And more practice-orientated equipment elements make working with them even easier, more
comfortable, faster and safer. For premium results and absolute reliability. FRITSCH premium line – the
new high-tech standard for the modern laboratory.
Planetary Micro Mill Jaw Crusher

P U LV E R I S E T T E 7 P U LV E R I S E T T E 1
premium line premium line
With highest rotation speeds Extremely strong
for ultra-fine grinding results with up to 3 kW drive power
down to the nano range
In the FRITSCH premium line

you find 5 high-tech laboratory
mills for various applications:
functionally designed to the
smallest detail, even easier to
operate, even more powerful,
faster and safer.
Page 10 – 11 Page 20
8
FRITSCH classic line – international standard
Worldwide, laboratory mills of the FRITSCH classic line are standard

for the most diverse applications in sample preparation. The brand
PULVERISETTE is an international synonym for fast size-reduction, easy
handling, reliable reproducibility and long service life even under con-
tinuous, heavy duty usage.
Disk Mill Planetary Mono Mill Variable Speed Rotor Mill

P U LV E R I S E T T E 1 3 P U LV E R I S E T T E 6 P U LV E R I S E T T E 1 4
premium line premium line premium line
For efficient fine grinding For fast and powerful With multi-functional tool system
of hard-brittle to wet and dry grinding for impact rotor, cutting rotor and
medium-hard solids down to the nano range knife insert
Page 22 e e
Fi na l te st ph as Fi na l te st ph as
avai la bl e 20 14 avai la bl e 20 14
9
FRITSCH Milling
FRITSCH Planetary Mills premium line
A Q U A N T U M L E A P I N T O T H E N A N O C L A S S – E X T R E M E LY H I G H - S P E E D M I L L I N G
W I T H S U N K E N B O W L S R O TAT I N G AT U P T O 1 1 0 0 R P M .
Discover a completely new dimension of high-tech milling: The

grinding bowls sunk into the disk enable to achieve revolutionary
IDEAL FOR rotation speeds of up to 1100 rpm at acceleration 95 times
PHARMACEUTICALS that of gravity. The result: significantly shorter grinding times
MECHANICAL ALLOYING and the finest possible grinding results down to the nano range.
METALLURGY
CERAMICS
MATERIAL RESEARCH
GEOLOGY AND
MINERALOGY
CHEMISTRY The compact design of the
BIOLOGY PULVERISETTE 7 premium line
combines maximum performance,
exceptional safety and quiet running
with minimal space requirements.
Analytical measuring with EASY GTM – Gas pressure and

temperature measuring system
Transform your PULVERISETTE 7 into an analytical
measuring system by using two EASY GTM-bowls with
special lid and a transmitter as well as a receiver board.
The advantage: Simple and easy monitoring of thermal
effects, physical and chemical reactions or increase or
decrease in pressure due to continuous measurement
of gas pressure and temperature directly in the grinding
bowl. The mill is automatically controlled in a manner that
Added time savings and reliability Simple, precise logging is
the set parameters are not exceeded. Especially practical: due to the ability to change bowls in ensured with perfect integration
The receiver unit needs only to be inserted and adjusted seconds and the unique SelfLOCK into the IT structure of your
just once – regardless of the number of EASY GTM-bowls system. laboratory through integrated
USB interfaces.
used. EASY GTM grinding bowls are available in seven
different materials with a bowl volume of 80 ml.
Easy, intuitive user navigation is guaranteed by the

ergonomically designed touch screen featuring
a particularly logical menu structure in 10 languages.
10
REVOLUTIONARY SELFLOCK-TECHNOL-
O G Y : P R O V I D E S A N E X T R E M E LY FA S T
BOWL CHANGE IN JUST TWO MOTIONS.
It could not be simpler or more reliable. The revolutionary

SelfLOCK bowls of the FRITSCH premium line now form a Planetary Micro Mill
single unit with the lid for the first time. They can be firmly PULVERISETTE 7 premium line
and securely closed with one motion and snap just as tightly
High performance
and securely into the mill with a second motion.
for smallest quantities
Working principle Impact force

Optimal for material type (for materials table and material type definitions, see page 7) Hard, medium-hard, brittle
Number of working stations 2
Grinding bowl sizes 20, 45, 80 ml
Grinding ball diameter 0.1 – 20 mm
Min. sample quantity 0.5 ml
Max. sample quantity 70 ml
Final fineness (depending on the material) < 0.1 µm
Typical grinding time down to analytical fineness 3 min
Grinding process Dry/wet
Grinding in inert gas Yes
Gas pressure and temperature measurement Yes
Rotational speed of main disk 100 – 1100 rpm
Transmission ratio
i relative = 1 : -2
planetary disk/grinding bowl
Effective diameter of main disk 140 mm
2
Centrifugal acceleration (g = 9.81 m/s ) 95 g
Interfaces USB
100-240 V/1~,
Electrical details
50-60 Hz, 1100 watt
Motor shaft power in accordance with VDE 0530, EN 60034 0.94 kW
Weight 44 kg
Dimensions w x d x h Bench top instrument: 40 x 58 x 36 cm
11
FRITSCH Milling
FRITSCH Planetary Mills classic line
FRITSCH Planetary Mills of the classic line

e are ideally suited especially easy to operate and clean. Matching grinding parts
for wet and dry comminution of hard, medium-hard, brittle of various materials are also available to provide maximum
and fibrous materials. Samples can be processed from a few protection against undesired contamination of the samples.
milligrams to several kilograms at a wide range of fineness
levels down to less than 1 µm. They are absolutely reliable,
Planetary Mill
IDEAL FOR PULVERISETTE 5 classic line
MATERIALS TECHNOLOGY Fast and fine
MECHANICAL ALLOYING/
ACTIVATION
SAMPLE PREPARATION
FOR ANALYSIS
CERAMICS
CHEMISTRY
4 working stationss 2 working stations
ons
BIOLOGY
PHARMACEUTICALS
METALLURGY

Optimal for material type
Hard, medium-hard, soft, brittle, tough, moist Hard, medium-hard, soft, brittle, tough, moist
(for materials table and material type definitions, see page 7)
Number of working stations 4 2

Grinding bowl sizes 80, 250, 500 ml 80, 250, 500 ml
Grinding ball diameter 0.1 – 40 mm 0.1 – 40 mm
Final fineness (depending on the material) < 1 µm < 1 µm
Typical grinding time down to analytical fineness 4 min 4 min
Grinding in inert gas Yes Yes
Gas pressure and temperature measurement Yes Yes
Rotational speed of main disk 50 – 400 rpm 50 – 400 rpm
Transmission ratio
i relative = 1 : –2.19 i relative = 1 : –2.19
planetary disk/grinding bowl
Effective diameter of main disk ~ 250 mm ~ 250 mm
2
Centrifugal acceleration (g = 9.81 m/s ) 22 g 22 g
Interfaces Yes Yes
100-120/200-240 V/1~, 100-120/200-240 V/1~,
Electrical details
50-60 Hz, 1300/1600 watt 50-60 Hz, 1300/1600 watt

1.5 kW 1.5 kW
EN 60034
Weight 120 kg 100 kg
12
Free FRITSCH sample grinding!
Send us your sample – we will advise you which mill is the right one for
you. Or take a look in the practical grinding report database by logging
on www.fritsch.de/solutions.
Planetary Mono Mill Planetary Micro Mill Vario-Planetary Mill

PULVERISETTE 6 classic line PULVERISETTE 7 classic line PULVERISETTE 4 classic line
High performance Unique – a variable

Ideal for the smallest quantities
in minimum space transmission ratio
Impact force Impact force Impact force
Hard, medium-hard, soft, brittle, tough, moist Hard, medium-hard, brittle, moist Hard, medium-hard, soft, brittle, tough, moist
1 2 2
80, 250, 500 ml 12, 45 ml 12, 45, 80, 250, 500 ml
0.1 – 40 mm 0.1 – 15 mm 0.1 – 40 mm
10 mm 5 mm 10 mm
10 ml 0.5 ml 0.5 ml
225 ml 40 ml 450 ml
< 1 µm < 1 µm < 1 µm
4 min 3 min 4 min
Dry/wet Dry/wet Dry/wet
Yes Only possible in glove box Yes
Yes No Yes
100 – 650 rpm 100 – 800 rpm 0 – 400 rpm
i relative = 1 : –1.82 i relative = 1 : –2 Variable
121.6 mm 140 mm ~ 250 mm

29 g 50 g 22 g
Yes Yes Yes
100-120/200-240 V/1~, 100-120/200-240 V/1~, 200-480 V/3~,
50-60 Hz, 1100 watt 50-60 Hz, 880 watt 50-60 Hz, 6000 watt
0.75 kW 0.37 kW 2.2 kW supporting disk, 2.2 kW planetary disk
63 kg 35 kg 320 kg
Bench top instrument: 37 x 53 x 50 cm Bench top instrument: 37 x 53 x 50 cm Floor instrument: 60 x 80 x 110 cm
13
FRITSCH Milling
FRITSCH Grinding Bowls and Grinding Balls
To avoid the risk of contaminating the samples with abrasion To shorten the grinding time, grinding bowls and balls with
from grinding elements, we offer grinding bowls and grinding a higher density and correspondingly higher impact energy
balls in 8 different materials for the FRITSCH classic line can be used.
and premium line. In normal cases, grinding bowls and balls
of the same material are used.
ed.
T HE R I GH T M AT ER IA L
FOR EVERY
AP PLI C ATI O N
GASSING LID
Through the use of a special lid on the grinding bowl, you can
also grind your samples in inert atmospheres. Two valves
allow for easy and safe filling of the bowls with inert gas
while they are firmly clamped in the mill. A special additional
Lock-System is required for gas-tight removal and transport.
GTM – GAS PRESSURE AND

T E M P E R AT U R E M E A S U R I N G S Y S T E M
GTM
compatible
With this Gas Pressure and Temperature Measurement
System developed in cooperation with the Fraunhofer
Institute for Applied Materials Research (IFAM) in Dresden,
the Planetar y Mills PULVERISETTE 4, PULVERISETTE 5
and PULVERISETTE 6 of the FRITSCH classic line can be
transformed into analytical measurement systems.
14
FRITSCH Ball Mills
FRITSCH Ball Mills are the most effective laboratory mills materials are available. FRITSCH ball mills are also the ideal
for rapid batchwise comminution of medium-hard to very lab assistants for mixing and homogenising.
hard samples down to the finest particle sizes. The grinding
can take place dry or wet. Grinding sets of many different
Vibratory Micro Mill Mini-Mill

IDEAL FOR PULVERISETTE 0 PULVERISETTE 23
PHARMACEUTICALS AND MEDICINE
CHEMICAL ANALYSIS Fine comminution and The smallest instrument
ENVIRONMENTAL RESEARCH sieving in one unit for small quantities
BIOTECHNOLOGY
FORENSIC ANALYSIS
MATERIAL TECHNOLOGY
RoHS

Optimal for material type (for materials table and Medium-hard, brittle, Medium-hard, brittle,
material type definitions, see page 7) temperature-sensitive, moist moist
Grinding bowl sizes – 5, 10, 15 ml
Grinding ball diameter 50 – 70 mm 0.1 – 15 mm
Min. sample quantity 1 ml 0.01 ml
Final fineness (depending on the material) 10 μm 5 μm
Typical grinding time (depending on the material) 10 min 2 min
Liquid nitrogen can be used

Cryogenic grinding Yes
for pre-cooling in the PTFE bowl
Grinding bowl oscillations per minute 3000 – 3600 at 1 – 3 mm amplitude 900 – 3000 at 9 mm amplitude
Electrical details 100-240 V/1~, 50-60 Hz, 50 watt 100-240 V/1~, 50-60 Hz, 90 watt
Weight 21 kg 7 kg
15
FRITSCH Milling
FRITSCH Cutting Mills
Cutting Mills are ideal for comminution of soft to medium- Various knife geometries and replaceable blades ensure
hard, fibrous or tough materials as well as plastics and for maximum flexibility and durability. Cutting tools of various
preparation of heterogeneous mixtures. The samples are steel types as well as of hardmetal tungsten carbide can be
comminuted by cutting and shearing forces, and the selected used for controlling the abrasion problems.
sieve insert determines the final fineness.
Cutting Mill
IDEAL FOR PULVERISETTE 15
PLASTICS AND TEXTILES
AGRICULTURE AND FORESTRY Effective and inexpensive
ENVIRONMENT
RoHS
ANALYTIC
CONSTRUCTION MATERIALS
CHEMISTRY
FOODSTUFFS
Working principle Cutting

Optimal for material type (for materials table and material type definitions, see page 7) Medium-hard, soft, fibrous
Max. feed size (depending on the material and funnel) 70 x 70 mm
Max. throughput (depending on the material and sieve size) 50 l/h
Sieve inserts 0.25 – 6 mm
Feeding Batchwise/continuous
Materials of the cutting tools Tool steel, chromium-free steel
Motor speed (depending on voltage and frequency) 2800 – 3400 rpm
400 V/3~, 50 Hz, 1900 watt

Electrical details 230-240 V/1~, 50 Hz, 2100 watt
100-120 V/1~, 60 Hz, 1850 watt
1.5 kW for all motors,

Motor shaft power in accordance with VDE 0530, EN 60034
except 1.1 kW for 100-120 V/1~ motor
Weight 37 kg
Table-mounting or on stand:
42 x 48 x 69 cm
16
Unmatched ease of cleaning!
FRITSCH cutting mills allow the entire
grinding chamber to be opened without tools
in seconds with just two simple motions
for complete cleaning of all grinding parts.
Unbeatably fast, simple and efficient!
Universal Cutting Mill Power Cutting Mill Cutting Mill Combination

PULVERISETTE 19 PULVERISETTE 25 PULVERISETTE 25/19
Easy cleaning due to simply Powerful pre-crushing Pre-crushing and fine comminution
exchangeable cutting tools even for larger samples in a single step
Cutting Cutting Cutting

Medium-hard, soft, brittle, tough, fibrous Medium-hard, brittle, tough, fibrous Medium-hard, brittle, tough, fibrous
70 x 80 mm 120 x 85 mm 120 x 85 mm
60 l/h 85 l/h 60 l/h
0.20 – 6 mm 1 – 10 mm 0.20 – 6 mm
Batchwise/continuous Batchwise/continuous Batchwise/continuous
Tool steel, hardmetal tungsten carbide, Tool steel, hardmetal tungsten carbide, Tool steel, hardmetal tungsten carbide,
chromium-free steel chromium-free steel chromium-free steel
2800 – 3400 rpm 300 – 360 rpm 300 - 360 / 2800 – 3400 rpm
400 V/3~, 50-60 Hz, 2000 watt

230 V/1~, 50-60 Hz, 2200 watt 400 V/3~, 50-60 Hz, 3240 watt 400 V/3~, 50-60 Hz, 6440 watt
100-120 V/1~, 50-60 Hz, 1850 watt
1.5 kW for all motors,

2.2 kW 2.2/1.5 kW
except 1.1 kW for 100-120 V/1~ motor
56 kg 75 kg 214 kg
Table-mounting or on stand: Table-mounting or on stand: On stand:
44 x 55 x 63 cm 45 x 65 x 63 cm 62 x 82 x 145 cm
17
FRITSCH Milling
FRITSCH Rotor-/Beater Mills
Due to their high grinding energy, Beater Mills are the best To avoid undesired abrasion, the FRITSCH Variable Speed
choice for soft to medium-hard and brittle samples – including Rotor Mill PULVERISETTE 14 classic line can be equipped
plastics. The material is comminuted through impact and with rotors made of stainless steel, titanium or with titanium
friction forces. The final fineness of the samples depends on nitride or tungsten carbide coatings.
the selected sieve insert.
Variable Speed Rotor Mill Cross Beater Mill

IDEAL FOR PULVERISETTE 14 classic line PULVERISETTE 16
ANALYTIC
BIOLOGY
Finest grinding thanks Ideal for soft
to highest speed to medium-hard samples
CHEMISTRY
AGRICULTURE AND FORESTRY
FOODSTUFFS
MINING AND METALLURGY
CERAMICS
PLASTICS AND TEXTILES
PHARMACEUTICALS
ENVIRONMENT/RoHS

Optimal for material type (for materials table and Medium-hard, soft, brittle, fibrous,
Medium-hard, brittle
material type definitions, see page 7) temperature-sensitive
Min. sample quantity 5 – 10 ml 30 – 40 ml
Max. throughput
5 l/h 80 l/h
(depending on the material and sieve size)
Sieve inserts 0.08 – 6 mm 0.12 – 10 mm

Feeding Batchwise/continuous Batchwise/continuous
Grinding parts Impact rotor, pin insert, impact bar Cross beater
Stainless steel, pure titanium, TiN-coated steel,
Materials of the grinding parts Cast iron, stainless steel
WC-coated steel
Motor speed 6000 – 20000 rpm 2850 rpm
400 V/3~, 50 Hz, 1480 watt

Electrical details 100-120/200-240 V/1~, 50-60 Hz, 1150 watt 230 V/1~, 50 Hz, 1590 watt
110 V/1~, 60 Hz, 1250 watt
Motor shaft power in accordance

0.55 kW 1.1 kW
with VDE 0530, EN 60034
Weight 23 kg 38 kg
Bench top instrument: Bench top instrument or on stand:
31 x 48 x 47 cm 42 x 45 x 56 cm
18
Mor tar Grinder
The FRITSCH Mortar Grinder is an all-purpose mill suitable contamination, grinding sets are offered in seven different
for a wide range of materials: hard-brittle to soft-wet and materials.
the popular choice in the chemical/pharmaceutical area. Its
gentle grinding through pressure and friction makes it the
ideal mill for grinding tablets in galenics. To avoid the risk of
Mortar Grinder
IDEAL F0R PULVERISETTE 2
PHARMACY
FOODSTUFFS
Gentle grinding
without thermal effects
CHEMISTRY
GLASS AND CERAMICS INDUSTRY
AGRICULTURE AND FORESTRY
Working principle Friction

Hard, medium-hard, soft, fibrous, abrasive,
Optimal for material type (for materials table and material type definitions, see page 7)
temperature-sensitive
Min. sample quantity 10 ml
Max. sample quantity up to 190 ml
Final fineness 10 – 20 μm
Grinding process Dry/wet
Grinding parts Mortar bowl with pestle
Motor speed 70/80 rpm
Electrical details 100-120/200-240 V/1~, 50-60 Hz, 250 watt
0.18 kW
VDE 0530, EN 60034
Weight 24 kg
19
FRITSCH Milling
FRITSCH Jaw Crushers premium line
The most powerful FRITSCH Jaw Crusher ever: up to 3 kW The combination of the PULVERISETTE 1 premium line e with
drive power ensure an exceptionally high throughput during the Disk Mill PULVERISETTE 13 premium line (p 22) – with
pre-crushing. The crushing jaws are completely retractable/ integrated sample divider – is ideal for automatic and con-
removable for easy cleaning. Integrated dust exhaust channels tinuous comminution of large quantities down to analytical
provide optimal working conditions. fineness – including coarse materials.
Jaw Crushers Jaw Crusher/Disk Mill

PULVERISETTE 1 PULVERISETTE 1 /13
IDEAL FOR
premium line (2 models) premium line
MINING AND METALLURGY Coarse and fine comminution
The premium version
CHEMISTRY in a single step – with integrated
for pre-crushing
GEOLOGY AND MINERALOGY sample divider
GLASS INDUSTRY
CERAMICS INDUSTRY
SOIL RESEARCH
ROCKS AND SOILS
Working principle Pressure Pressure/shearing force

Optimal for material type (for materials table and
Hard, medium-hard, brittle Hard, medium-hard, brittle
material type definitions, see page 7)
Max. feed size (depending on the material) 95 mm resp. 60 mm 95 mm resp. 60 mm

200 kg/h resp. 140 kg/h 150 kg/h
(depending on the material and gap width)
Final fineness 0.3 – 15 mm 0.1 – 12 mm

Fixed and movable crushing jaws
Grinding parts Fixed and movable crushing jaws
and grinding disks
Tempered steel, stainless steel, Tempered steel, stainless steel, chromium-free

Materials of the grinding parts chromium-free steel, manganese steel, hardmetal steel resp. hardened steel cast, manganese steel,
tungsten carbide, zirconium oxide hardmetal tungsten carbide, zirconium oxide
Eccentric oscillations 308 movements/min –
400 V/3~, 50-60 Hz, 3540 watt resp. 1450 watt

400 V/3~, 50-60 Hz, 3280 watt resp.
Electrical details 230 V/1~, 50-60 Hz, 1570 watt
400 V/3~, 50-60 Hz, 5370 watt
115 V/1~, 50-60 Hz, 1900 watt
P-1, model I: 1.1 kW

3 kW resp. 1.1 kW P-1, model II: 3 kW
with VDE 0530, EN 60034
P-13: 1.5 kW
Weight 320 kg resp. 305 kg 715 resp. 700 kg

Dimensions w x d x h Bench top instrument: 55 x 90 x 106 cm Floor instrument: 61 x 136 x 177 cm
20
FRITSCH Jaw Crushers classic line
The Jaw Crusher PULVERISETTE 13 classic line e is the The combination with the FRITSCH Disk Mill PULVERI-
classic “workhorse” for the pre-crushing of brittle materials. SETTE 13 classic line e (see page 23) is ideal for automatic
FRITSCH offers grinding parts for these instruments made and continuous comminution of large quantities down to
of various steel types, tungsten carbide and zirconium oxide. analytical fineness – including coarse materials.
Jaw Crushers Jaw Crusher/Disk Mill

PULVERISETTE 1 PULVERISETTE 1 /13
IDEAL FOR
classic line (2 models) classic line
Coarse and fine comminution
CHEMISTRY The standard for pre-crushing
in a single step
GLASS INDUSTRY
CERAMICS INDUSTRY
SOIL RESEARCH
ROCKS AND SOILS
Working principle Pressure Pressure/shearing force

Hard, medium-hard, brittle Hard, medium-hard, brittle
Max. feed size (depending on the material) 95 mm resp. 60 mm 95 mm resp. 60 mm

200 kg/h resp. 140 kg/h 150 kg/h
(depending on the material and gap width)
Final fineness 1 – 15 mm 0.1 – 12 mm

Fixed and movable crushing jaws
Grinding parts Fixed and movable crushing jaws
and grinding disks
Tempered steel, stainless steel, Tempered steel, stainless steel, chromium-free

Materials of the grinding parts chromium-free steel, manganese steel, hardmetal steel resp. hardened steel cast, manganese steel,
tungsten carbide, zirconium oxide hardmetal tungsten carbide, zirconium oxide
Eccentric oscillations 308 movements/min –
400 V/3~, 50-60 Hz,

3280 watt resp.
400 V/3~, 50-60 Hz,
115 V/1~, 50-60 Hz, 1900 watt
4610 watt
P-1, model I: 1.1 kW

2.2 kW resp. 1.1 kW P-1, model II: 2.2 kW
with VDE 0530, EN 60034
P-13: 1.5 kW
Weight 205 kg resp. 177 kg 334 resp. 362 kg

21
FRITSCH Milling
FRITSCH Disk Mill premium line
The FRITSCH Disk Mill PULVERISETTE 13 premium line tal gap display and presentation of all parameters on a
is the premium model for efficient fine grinding of hard- well-designed display.
brittle to medium-hard solids: Even more power ful and
safer due to automatic locking of the collecting vessel
and grinding chamber, even easier to operate due to digi-
Disk Mill
PULVERISETTE 13
IDEAL FOR
premium line
CERAMICS INDUSTRY
Comminution down to 100 μm –
absolutely reproducible with digital display
ROCKS AND SOILS
GLASS INDUSTRY
SOIL RESEARCH
Working principle Shearing force

Hard-brittle, medium-hard

Max. throughput (depending on the material) 150 kg/h
Final fineness 0.1 - 12 mm
Feeding Batchwise/continuous
Grinding parts Fixed and movable grinding disk
Materials of the grinding parts Hardened steel cast, manganese steel, hardmetal tungsten carbide, zirconium oxide
Motor speed 440 rpm
1.5 kW
VDE 0530, EN 60034
Weight 240 kg
22
FRITSCH Disk Mills classic line
The FRITSCH Disk Mill PULVERISETTE 13 classic line is Based on a new drive concept, the completely modified
most suited for size reduction within the medium particle FRITSCH Vibrating Cup Mill PULVERISETTE 9 offers an
size range. Comminution takes place through pressure and extra-fast grinding with up to 1500 rpm: extremely quiet and
shearing force. simple to operate, due to lighter grinding sets, convenient
one-hand lever tensioning and multilingual menu navigation.
Disk Mill
Vibrating Cup Mill
PULVERISETTE 13
IDEAL F0R PULVERISETTE 9
classic line
AGRICULTURE AND ENVIRONMENT
ORE AND GEOLOGY LABORATORIES
Ideal for comminution Fastest comminution
down to 100 μm thanks to powerful drive
SPECTROSCOPY PREPARATION
INFRARED AND X-RAY
FLUORESCENCE ANALYSIS
CERAMICS INDUSTRY
ROCKS AND SOILS
GLASS INDUSTRY
SOIL RESEARCH
Working principle Shearing force Impact force

Hard-brittle, medium-hard Hard, brittle, fibrous

Min. sample quantity 20 – 30 ml 10 – 20 ml
Max. throughput (depending on the material) 150 kg/h 250 ml
Final fineness 0.1 – 12 mm 10 – 20 μm
Feeding Batchwise/continuous Batchwise
Grinding parts Fixed and movable grinding disk Grinding puck with impact rings
Hardened steel cast, manganese steel, Tempered steel, chromium-free steel, hardmetal
Materials of the grinding parts
hardmetal tungsten carbide, zirconium oxide tungsten carbide, agate, zirconium oxide
Motor speed 440 rpm 600 – 1500 rpm
230-240 V/1~, 50-60 Hz, 1200 watt
100-120 V/1~, 50-60 Hz, 1200 watt

1.5 kW 1.1 kW
VDE 0530, EN 60034
Weight 140 kg 267 kg
Pellet P
Press
For fast an
and easy preparation of both: solid and highly permeable pellets for X-ray fluorescence
analysis or infrared spectroscopy – manual, hydraulic, easy.
• Variable p
pressure force of up to 250 kN
• Simple operation
o via hand lever
• Solid and compact with impact-resistant cladding
• Easy cleaning
clea
23
FRITSCH Sieving
FRITSCH Sieve Shakers
With their innovative and practical features, the new These instruments offer maximum comfort and precision
generation of FRITSCH Sieve Shakers satisfy all requirements with automatic amplitude control, programme selection,
for accurate and reproducible sieving analysis and even control and evaluation software as well as high-quality sieve
exceed requirements in many areas. stack tensioning system.
Vibratory Sieve Shaker

IDEAL FOR ANALYSETTE 3 PRO
SIEVING
MEASURING THE QUANTITATIVE PARTICLE SIZE Quality control through amplitude monitoring
DISTRIBUTION OF SOLIDS AND SUSPENSIONS
SEPARATING
FRACTIONING
Method of analysis Sieving
Measuring range: 20 μm – 63 mm
Dry sieving Max. sample quantity (approx.): 2 kg
Sieving time (approx.): 3 – 20 min
Wet sieving Max. sample quantity (approx.): 20 – 100 g
Measuring range: 5 μm – 100 μm

Micro-precision sieving Max. sample quantity (approx.): 0.05 – 0.5 g
Max. weight of sieve stack 3 kg

Amplitude 0.1 – 3 mm
Amplitude control Automatic
Sieve diameters
100 mm, 200 mm or 8“
Max. number of sieves per sieve stack 10 (50 mm height) or 16 (25 mm height)
Max. height of sieve stack 550 mm
Automatic sieve analysis with evaluation software AUTOSIEVE Yes
Testing instrument calibration according to ISO 9001 Yes
Interfaces Yes
Intermittent mode Yes
Memory for 9 sieve programmes Yes
Electrical details 100-240 V/1~, 50-60 Hz, 50 watt
Weight 21 kg
24
The top model ANALYSETTE 3 PRO can be integrated into FRITSCH Sieve Shakers are available for sieves up to
any quality management system according to DIN EN ISO 450 mm in diameter for dry, wet and micro-precision sieving.
9001 as a testing instrument thanks to state-of-the-ar t The automatic sieving analysis is performed by the control
electronics and maximum reliability. and evaluation software AUTOSIEVE.
Vibratory Sieve Shaker Heavy Duty Analytical Sieve Shaker

ANALYSETTE 3 SPARTAN ANALYSETTE 18
The best deal in size separation Ideal for large sample quantities
Sieving Sieving
Measuring range: 20 μm – 63 mm Measuring range: 20 μm – 125 mm

Max. sample quantity (approx.): 2 kg Max. sample quantity (approx.): 15 kg
Sieving time (approx.): 3 – 20 min Sieving time (approx.): 5 – 60 min
Max. sample quantity (approx.): 20 – 100 g –
– –
3 kg 42 kg
0.5 – 3 mm 0.1 – 2 mm
Manual Automatic
200 mm, 250 mm, 300 mm, 315 mm, 350 mm, 400 mm, 450 mm
100 mm, 200 mm or 8“
and 8“, 12“, 16“, 18“
10 (50 mm height) or 16 (25 mm height) 12 (65 mm height)
550 mm 845 mm
Yes Yes
No Yes
No Yes
No Yes
No Yes
230 V/1~, 50-60 Hz, 200 watt
100-240 V/1~, 50-60 Hz, 50 watt
115 V/1~, 50-60 Hz, 200 watt
21 kg 135 kg
Bench top instrument: 37 x 40 x 20 cm Floor instrument: 58 x 59 x 130 cm
25
FRITSCH Dividing Feeding Cleaning
FRITSCH Sample Division/Feeding/Ultrasonic Cleaning
The instruments of the FRITSCH LABORETTE line will make a representative sample. Its unique combination of three
your work more efficient and guarantee reproducible and dividing methods achieves previously unheard of dividing
representative sample preparation – the foundation for precision. Variable division ratios and the design in several
every precise analysis! The FRITSCH Rotary Cone Sample variants guarantee adaptation to a wide range of applications
Divider creates the optimal basis for reliable analysis of with a dividing accuracy of up to 99.9%.
Rotary Cone Sample Divider

IDEAL FOR LABORETTE 27
REPRESENTATIVE
SAMPLE PREPARATION!
Indispensable for representative
sample preparation
Division ratio Division 1:8 Division 1:10 Division 1:30

Number of possible sub-samples 8 10 3
POM Plastic POM Plastic POM Plastic or PTFE-coated
Materials
or aluminium or aluminium aluminium
Max. particle size 10 mm 10 mm 2.5 mm
Max. sample quantity 4000 ml 2500 ml 300 ml
Capacity of sample bottles 25, 250, 500 ml 25, 250 ml 15, 20, 30 ml
Division Dry/wet Dry/wet Dry/wet
Electrical details
Weight 7.7 kg 7.7 kg 7.7 kg
Dimensions w x d x h Bench top instrument: 27 x 45 x 46 cm Bench top instrument: 27 x 45 x 46 cm Bench top instrument: 27 x 45 x 46 cm
26
The FRITSCH LABORETTE 24 is the ideal instrument for Both models of the FRITSCH LABORETTE 17 gently clean
efficient feeding of mills, sample dividers, mixers, sieve sensitive parts such as test sieves, micro-precision sieves,
shakers, balances and other laboratory instruments. filters, glassware and laboratory instruments and also help
in accelerating chemical reactions as well as dispersing
suspensions.
Vibratory Feeder Ultrasonic Cleaner

with V-shaped channel/wide LABORETTE 17
channel LABORETTE 24 (2 models)
Ideal for gentle cleaning
For automatic feeding
and dispersing
Useful capacities 5.6 litres resp. 28 litres

Ø 24 cm, 13 cm deep
Tank dimensions
resp. 50 x 30 x 20 cm
Ø 21.8 cm, 5 cm high, grid 5 x 5 cm

Suspended basket dimensions
resp. 45.5 x 24.5 x 5 cm, grid 5 x 5 mm
2 x 240 watt/period, 35 kHz

Max. sound output
resp. 2 x 600 watt/period, 35 kHz

Electrical details
115 V/1~, 50-60 Hz, 140 watt
Weight 4.6 kg resp. 14.3 kg
Bench top instrument: Ø 26.5 cm, 27 cm high
resp. 53.5 x 32.5 x 40 cm
Complete length of the conveyance channel 330 mm

Channel overlap 215 mm
Max. feed quantity 2500 g/min
Min. feed quantity 5 g/min
V-shaped channel and U channel
Change of the channel
can be easily exchanged
200-240 V/1~, 50-60 Hz, 20 watt

Electrical details
100-120 V/1~, 50-60 Hz, 20 watt
Weight 12 kg
Technical specifications are subject to change without notice. 27

Sieve Shakers
IDEAL FOR
- SIEVING
- MEASURING THE QUANTITATIVE
PARTICLE SIZE DISTRIBUTION OF
SOLIDS AND SUSPENSIONS
- SEPARATING
- FRACTIONING
SIEVE SHAKERS
FRITSCH Sieve Shakers
EVERYTHING YOU NEED FOR SIEVING

The FRITSCH sieve range is the focused answer to all typical sieving tasks in the laboratory: three
well-conceived instruments for every application, with FRITSCH concepts that make the work
simpler and faster – easy to operate, reliable and long-lasting. For dry, wet and micro-precision siev-
ing, with extensive accessories and the modified analysis software AUTOSIEVE. Typically FRITSCH!
With FRITSCH, you have chosen an internationally respected manu-
facturer of application-oriented laborator y instruments. For more than
90 years, laboratories worldwide have relied on our experience, quality,
FRITSCH. ONE STEP AHEAD.

ser vice and innovation – for fast industrial applications as well as
for especially accurate results in control- and research laboratories.
See for yourself.
2
ANALYSETTE 3 SPARTAN ANALYSETTE 3 PRO ANALYSETTE 18
Simple sieving for Precise sieving Effective sieving
all tasks with amplitude control of large quantities
FRITSCH SIEVE SHAKERS:

C O N V E N I E N T, P R E C I S E , R E L I A B L E
Dry, wet and micro-precision sieving
Simple, ergonomic operation
Fast, reproducible results
Sample quantities between 0.05 g and 15 kg
Sieve diameter from 100 mm to 450 mm, mesh widths from 5 µm – 125 mm
Can be used as testing equipment in accordance with DIN EN ISO 9001
Automatic sieve evaluation with the extensive FRITSCH software AUTOSIEVE
3
FRITSCH Vibratory Sieve Shaker
A N A LY S E T T E 3 PRO
Precise sieving with
automatic amplitude control
The high performance Vibratory Sieve Shaker ANALYSETTE 3 PRO offers everything you need for fast
determination of quantitative particle size distribution in the laboratory. As a shaking sieve system
with an electromagnetic drive oscillates the sieve stack into regulated vertical oscillations, and is the
ideal solution for sieving sample quantities up to 2 kg and a measurement range from 5 µm to 63 mm.
The ANALYSETTE 3 PRO is perfectly suited for fast quality control of incoming and outgoing products,
offers user-friendly operation and is low-noise, robust and long-lasting.
1 2 3
NEW: INTELLIGENT WET SIEVING
FRITSCH Advantage The specially developed FRITSCH wet FRITSCH Advantage The unique, warp-free FRITSCH
sieving lid with 2 rotation nozzles for an uniform spraying of EASYTWIST sieve stack tensioner for tensioning the
the material to be sieved from above and by an additional sieve stack with high-quality, steel-reinforced plastic
interposed sieving ring above the sieve with the largest bands. Your benefit: Faster, simpler setup in just a
amount of finely sieved material. few steps, unobstructed work without annoying rods,
Your benefit: Improved sieving effect for faster results – and lower space requirements and more safety. Particularly
the most efficient wet sieving that has ever existed. beneficial: The tensioning system is already included in
the instru
instrument price.
FRITSCH Advantage The multilingual AUTOSIEVE

programme
program for controlling the ANALYSETTE 3 PRO
and for automatic
a evaluation, simple monitoring and
documentation
documen of your sieving results is supplied on a
practical USB stick and is therefore very quickly installed.
All you h
have to do is to connect a laboratory analysis
balance (see
( ordering data, accessories for automatic
evaluation of sieve analysis), and then weigh the sieves
evaluatio
before a
and after sieving using differential weighing.
AUTOSIEVE will do the rest. The software, which is suitable
AUTOSIEV
for Windows
Windo 7, XP and Vista, enables simple saving and
retrieving of empty sieve weights, both of single sieves
and comp
complete sieve sets.
4
S TA N D A R D S - C O M P L I A N T F O R I N T E G R AT I O N
INTO ISO 9001 QUALITY MANAGEMENT
Especially efficient Up to 10 test sieves

can be used simultaneously per work-
ing cycle – allowing up to 5 sieving
operations (interposed sieve pan and
sieve alternately) to be performed at
the same time.
Especially safe The optimum power

consumption using the variable sieving
frequency of the ANALYSETTE 3 PRO
prevents a warming up of the sieving
system.
Especially clever All functions can

be controlled via a RS232 interface.
The inter face and AUTOSIEVE allow
inspection of the sieving process via an
online comparison of the set and actual
amplitude.
FRITSCH Advantage AMPCONTROL

for setting constant amplitude, which is
automatically monitored and regulated.
Your advantage: Guaranteed constant
amplitude, meaning precisely repro-
ANALYSETTE 3 PRO
ducible sieving results in accordance
with DIN 66165 and the possibility to
calibrate and validate your ANALYSETTE
3 PRO as an inspection instrument in
Especially simple inspection of measuring and testing
The following functions can be conveniently controlled via the keyboard: equipment according to ISO 9001.
Programme selection – You can store up to 9 individual sieve programmes
to make your work even easier. Especially convenient All important
Intermittent mode – For sieving voluminous material with low density to sieving parameters such as sieving
reduce the sieving time. time and amplitude are entered directly
Micro- and micro-intermittent mode – For micro-sieving of fine materials via the clearly organised, ergonomically
in the range from 5 µm to 100 µm. installed soft touchpad with digital dis-
Energy-saving mode – the instrument switches automatically to standby play.
5
FRITSCH Vibratory Sieve Shaker
A N A L Y S E T T E 3 SPARTAN
Simple sieving for all tasks
The little sister of the ANALYSETTE 3 PRO for all typical sieving tasks in the laboratory with optical
adjustment of the amplitude on the running instrument. Complete with the practical FRITSCH
sieve stack tensioning system EASYTWIST and the possibility of automatic evaluation of the sieve
analysis using the extensive FRITSCH evaluation software AUTOSIEVE.
Especially practical Optical display of

the amplitude during sieving.
Up to 10 test sieves can be used simul-

taneously per working cycle – allowing up to
5 sieving operations (interposed sieve pan
and sieve alternately) to be performed at the
same time.
FRITSCH Advantage The easy-to-use and

time-saving sieve stack tensioner with steel-
reinforced plastic bands is included in the
instrument price.
The optimum power consumption using the

variable sieving frequency of the ANALY-
SETTE 3 SPARTAN prevents warming up of
the sieving system.
Especially simple Manual adjustment of the

amplitude.
Exact entry of the sieving time via a precise

digital timer on the ergonomically installed
and robust soft touchpad.
ANALYSETTE 3 SPARTAN
6
TECHNICAL DATA
ANALYSETTE 3 PRO ANALYSETTE 3 SPARTAN
Method of analysis Sieving Sieving
Dry sieving
Measuring range 20 µm – 63 mm* 20 µm – 63 mm*
Max. sample quantity (approx.) for sieves < 63 mm: up to 2 kg* for sieves < 63 mm: up to 2 kg*
for sieves < 100 µm: up to 100 g* for sieves < 100 µm: up to 100 g*
Sieving time (approx.) 3 – 20 min* 3 – 20 min*
Wet sieving
Measuring range 20 µm – 10 mm 20 µm – 10 mm
Max. sample quantity (approx.) 20 – 100 g* 20 – 100 g*
Sieving time (approx.) 3 – 10 min* 3 – 10 min*
Micro-precision sieving
Measuring range 5 µm – 100 µm
Max. sample quantity (approx.) 0.05 – 0.5 g*
Sieving time (approx.) 30 – 60 min*
Max. weight of sieve stack 3 kg 3 kg
Amplitude 0.1 – 3 mm 0.5 – 3 mm
Amplitude control automatic manual
Sieve diameters 100 mm, 200 mm or 8“ 100 mm, 200 mm or 8“
Max. number of sieves per sieve stack 10 (50 mm height) 10 (50 mm height)
or 16 (25 mm height) or 16 (25 mm height)
Max. height of sieve stack 550 mm 550 mm
Automatic sieve analysis with
evaluation software AUTOSIEVE Yes Yes
Testing instrument calibration according
to ISO 9001 Yes No
Interface Yes No
Intermittent mode Yes No
Memory for 9 parameter combinations Yes No
Convertible to
Vibratory Micro Mill PULVERISETTE 0 Yes Yes
Electrical details 100-240 V/1~, 50-60 Hz, 50 watt 100-240 V/1~, 50-60 Hz, 50 watt
Weight
Net/gross 21 kg / 26 kg 21 kg / 26 kg
Bench top instrument 37 x 40 x 20 cm 37 x 40 x 20 cm
Packing details w x d x h
Cardboard box 50 x 43 x 30 cm 50 x 43 x 30 cm
Emissions value of workplace according
to DIN EN ISO 3746:2005 (depending on
approx. 63 dB(A)
the material to be sieved and instrument configuration) approx. 63 dB(A)
Order no. 03.7020.00 03.8020.00
*Depending on the material to be sieved and the sieves used
YOUR SIEVE SHAKER BECOMES A MILL
FRITSCH Advantage With just a few

ew motions, your Sieve Shaker can be
transformed into the Vibratory Micro
o Mill PULVERISETTE 0 for grinding and
homogenising small sample quantities
ties (filling volume 1 to 10 ml, feed
particle size < 5 mm). And with the special FRITSCH cryo-box, grinding
is even possible at low temperatures
s with liquid nitrogen. The ANALY-
SETTE 3 SPARTAN enables stable, uniform
niform vibration in connection
with the grinding set – the perfect milling solution!
The corresponding accessories can be found in the leaflet Ball
Mills or at www.fritsch.de.
PULVERISETTE 0 Vibratory Micro Mill
7
FRITSCH Accessories
A C C E S S O R I E S A N A LY S E T T E 3
Sieves FRITSCH Micro-Precision Sieves Sieve clamping lid, sieve pans and
For dr y and wet sieving with mesh Available only from FRITSCH: With the interposed sieve pans for dry sieving
widths from 20 µm to 63 mm. All are micro-precision sieves, the ANALY- For observation of the sieving process,
especially light, robust and manu- SETTE 3 PRO is suitable for wet-sieving sieve clamping lids made of plexiglas
factured in high quality (no soldered of fine materials from 5 µm to 100 µm are available for FRITSCH test sieves
seam!). Highly alloyed stainless steel and for dry sieving of the smallest sam- of 100 mm or 200 mm/8“ diameter.
protects against corrosion and simpli- ple quantities from 0.05 – 0.5 g. The You also receive a clamping lid made
fies cleaning. Groove-free mesh tran- micro-precision sieves of pure nickel of polyamide (without window) to
sitions prevent contamination of the foil with a sieve diameter of 100 mm sieve materials for which metallic
sieving material. Available in accor- feature a large open sieving surface. contamination must be avoided. Of
dance with ISO 3310 -1 or ASTM E-11- Blockages are reliably prevented by the course, we also offer corresponding
1995 in the diameters 200 mm (height etched-in holes that widen toward the sieve pans and sieves made of plastic.
50 mm or 25 mm), 100 mm (height bottom. The matching clamping set, Sieve pans and interposed sieve pans
40 mm) or 8“ (height 2“). Every sieve is sieve clamping lid, sieve pan, sieve for multiple sieving operations in a
laser-engraved, optically measured and spacer and fast locking clamp along single process are available in stainless
delivered with a compliance certificate. with the large sieve sur face permit steel for all sieve sizes.
efficient sieving.
8
C E R T I F I C AT E S
For certification of the ANALYSETTE 3 PRO as an inspection instrument, a 3.1 EN 10204 inspection certificate
as well as a form for IQ/OQ documentation are available. A 3.1 EN 10204 inspection certificate is also
offered for FRITSCH test sieves in accordance with ISO 3310-1.
Of course, we would also be happy to recertify your Vibratory Sieve Shaker ANALYSETTE 3 PRO and FRITSCH
test sieves according to ISO 3310-1 at our headquarters in Idar-Oberstein or directly at your location.
IQ/OQ documentation is also available for the ANALYSETTE 3 SPARTAN.
Sieve clamping lid, interposed sieve Universal sieve tensioning system Sieving aids
rings and sieve pans for wet sieving TorqueMaster For dry sieving of materials with a high
Only available from FRITSCH: During For precise results: The electrically share of fine particles, 10 mm agate
wet sieving with test sieves (200 mm/ tensioned and easy-to-operate FRITSCH balls or 20 mm rubber balls should be
8“), the practical clamping lid with TorqueMaster applies constant and used as sieving aids for medium and
2 rotation nozzles ensures an uniform reproducible tensioning forces to the large sieves and 5 mm agate balls
spraying of the sieving material and an sieve stack through precisely controlled for fine sieves. Your advantage: They
optimal sieving effect. Special inter- fastening of the sieve clamping lid. prevent clogging of the sieve mesh.
posed sieving rings with three nozzles Essential when using the ANALYSETTE
are available for simultaneous spraying 3 PRO as inspection instrument
of the top and bottom sieves. A sieve according to ISO 9001.
clamping lid of plexiglas with 1 nozzle
is also offered for wet sieving with
100 mm test sieves. The corresponding
sieve pans with outlet are available for
all sieve sizes.
Gentle cleaning: LABORETTE 17

Clean the sensitive test sieves and micro-precision sieves intensively and gently
with the FRITSCH Ultrasonic Cleaners LABORETTE 17. This allows you to avoid
undesired contamination and extend the service life of the sieves. Two volume
sizes are available: 5.6 l or 28 l.
More information at www.fritsch.de
9
FRITSCH Heavy Duty Analytical Sieve Shaker
A N A LY S E T T E 18
Effective sieving of large quantities
The ANALYSETTE 18 is the robust, Heavy Duty Analytical Sieve Shaker from FRITSCH. It can
effortlessly sieve up to 15 kg of material between 20 µm and 125 mm. The three-dimensional
sieving motion ensures particularly fast sieving results without manual re-sieving, and also optimal
reproducibility.
ww
FRITSCH Ad
Advantage Universal suppor t
plate for sieves
sieve with diameters of 200, 250,
300, 315, 350
350, 400 and 450 mm as well as
8, 12, 16 or 18
18“. Sieves with mesh width from
20 µm to 125 mm in accordance with ISO
3310-1 and ASTM
A E-11-1995 are available.
For sieving of fine-grained

e-grained materials or agglom- Especially reproducible Constant ampli-
erates, the use off for example vulkollan cubes tude at all times due to automatic ampli-
are recommended.
d. tude control with continuous acceleration
measurement of the whole sieve stack.
Especially comfortable The ANALYSETTE

18 is operated by remote control via a se-
parate, handy operating unit.
10
TECHNICAL DATA
ANALYSETTE 18 ANALYSETTE 18
Method of analysis Sieving Electrical details 230 V/1~, 50-60 Hz, 200 watt
Dry sieving 115 V/1~, 50-60 Hz, 200 watt
Measuring range 20 µm – 125 mm* Weight
Max. sample quantity (approx.) 15 kg* Net/gross 135 kg / 157 kg
Sieving time (approx.) 5 – 60 min* Dimensions w x d x h
Max. weight of sieve stack 42 kg Floor instrument 58 x 59 x 130 cm
Amplitude 0.1 – 2 mm Packing details w x d x h
Amplitude control Automatic Wooden case 84 x 79 x 55 cm
Sieve diameters 200 mm, 250 mm, 300 mm, 315 mm, 350 mm, Emissions value of workplace
400 mm, 450 mm and 8“, 12“, 16“, 18“ according to DIN EN ISO 3746:2005
Max. number of sieves per sieve stack 12 (65 mm height) (depending on the material to be sieved
Max. height of sieve stack 845 mm and instrument configuration) approx. 73 dB(A)
Automatic sieve analysis Order no. 230 V/1~, 50 – 60 Hz 115 V/1~, 50 – 60 Hz
with evaluation software AUTOSIEVE Yes 18.3020.00 18.3010.00
Testing instrument calibration according
to ISO 9001 Yes
Interface Yes
Intermittent mode Yes
Memory for 10 parameter combinations Yes
* Depending on the material to be sieved and the sieves used
Especially practical and safe The

ANALYSETTE 18 is supplied with the
TwinNut quick fastening system for
sieves and clamping lids. This safely
ensures constant tensioning pressure
and stability of the sieve stack.
closed opened
Especially efficient Up to 12 test

sieves (65 mm height) with sieve pans
and lid can be used per working cycle.
FRITSCH Advantage The multilingual

AUTOSIEVE programme for automatic
evaluation, simple monitoring and docu-
mentation of your sieving results is sup-
plied on a practical USB stick and is
therefore very quickly installed. All you
have to do is to connect a laboratory
analysis balance, and then weigh the
sieves before and after sieving using
differential weighing. AUTOSIEVE will do
the rest. The software, which is suitable
for Windows 7, XP and Vista, enables
simple saving and retrieving of empty
ANALYSETTE 18 sieve weights, both of single sieves and
complete sieve sets (see ordering data,
accessories for automatic evaluation of
sieve analysis).
11
FRITSCH ANALYSETTE 3
VIBRATORY SIEVE SHAKER SPECIAL ACCESSORIES
ANALYSETTE 3 PRO + SPARTAN ANALYSETTE 3 PRO + SPARTAN
Accessories for grinding and homogenising small sample quantities

31.2010.00 Grinding head for conversion to Vibratory Micro Mill PULVERISETTE 0
Request a detailed Ball Mills leaflet with information on the Vibratory
Micro Mill PULVERISETTE 0 as well as mortars and balls.
Instrument without clamping lid, test sieves and sieve pan Accessories for gentle cleaning of test sieves and micro-precision sieves
03.7020.00 Model PRO, for 100-240 V/1~, 50-60 Hz For gentle cleaning of the test sieves and micro-precision sieves, we recommend
03.8020.00 Model SPARTAN, for 100-240 V/1~, 50-60 Hz the FRITSCH Ultrasonic Cleaners LABORETTE 17.
More information can be found at www.fritsch.de.
Accessories for dry sieving
31.2020.00 Clamping lid plexiglas for test sieves 200 mm/8“ dia. Recertification of the Vibratory Sieve Shaker ANALYSETTE 3 PRO and
31.2050.00 Clamping lid polyamide (without window) for all test sieves FRITSCH test sieves according to ISO 3310-1 on request.
up to 200 mm/8“ dia.
31.2100.00 Sieve tensioning system TorqueMaster (consisting of clamping lid plexiglas Computer, colour ink jet printer and laser printer on request.
for test sieves 200 mm/8“ dia. and electrical tool 100-240 V/1~, 50-60 Hz)
31.2010.00 Clamping lid plexiglas for test sieves 100 mm dia.
31.1300.03 Interposed sieve pan made of stainless steel 200 mm dia., 50 mm height
31.1320.03 Interposed sieve pan made of stainless steel 8“ dia., 2“ height
31.1000.03 Sieve pan made of stainless steel 200 mm dia., 50 mm height
31.1020.03 Sieve pan made of stainless steel 8“ dia., 2“ height
31.1040.03 Sieve pan made of stainless steel 100 mm dia., 40 mm height
Accessories for wet sieving

31.0400.00 Clamping lid plexiglas with 2 rotation nozzles for test sieves
200 mm/8“ dia.
31.1100.03 Sieve pan made of stainless steel with outlet 200 mm dia., 50 mm height
31.0240.00 Interposed sieving ring with 3 nozzles for test sieves 200 mm dia.
31.1120.03 Sieve pan made of stainless steel with outlet 8“ dia., 2“ height
31.0250.00 Interposed sieving ring with 3 nozzles for test sieves 8“ dia.
31.2040.00 Clamping lid plexiglas with 1 nozzle for test sieves 100 mm dia.
31.1140.00 Sieve pan made of stainless steel with outlet 100 mm dia., 40 mm height
Accessories for micro-precision sieving

(Only possible with ANALYSETTE 3 PRO)
33.1200.00 Clamping set for micro-precision sieves 100 mm dia.
(= 3 screws + clamps, without clamping lid, sieve pan and
micro-precision sieves)
33.1050.00 Clamping lid aluminium/plexiglas with 1 nozzle
33.1150.00 Funnel (sieve pan) of aluminium with outlet
33.1000.00 Sieve spacer made of aluminium with 2 seal rings
33.1100.00 Fast locking clamp made of stainless steel
(See ordering example page 13)
Certification
96.0010.00 Inspection certificate 3.1 EN 10204 for FRITSCH Sieve Shaker
ANALYSETTE 3 PRO
96.0200.00 IQ/OQ documentation (questionnaire format - for filling out by customer)
for FRITSCH Sieve Shaker ANALYSETTE 3 PRO
96.0100.00 IQ/OQ documentation (questionnaire format - for filling out by customer)
for FRITSCH Sieve Shaker ANALYSETTE 3 SPARTAN
31.0900.00 Inspection certificate 3.1 EN 10204 for FRITSCH test sieves
according to ISO 3310-1
Accessories for automatic evaluation of sieve analysis

03.2900.00 Software AUTOSIEVE for Windows
for control and automatic evaluation of sieve analysis
03.2600.00 Laboratory analysis balance, up to 4.1 kg (± 0.01 g) with RS232 interface,
incl. computer connection cable
Sieving aids
55.0050.05 Agate ball 5 mm dia. (15 pcs. per sieve)
55.0100.05 Agate ball 10 mm dia. (10 pcs. per sieve)
31.0180.15 Rubber ball 20 mm dia. (5 pcs. per sieve)
Sieve covers
31.1200.03 Sieve cover made of stainless steel for test sieves 200 mm dia.
31.1220.03 Sieve cover made of stainless steel for test sieves 8“ dia.
31.1240.03 Sieve cover made of stainless steel for test sieves 100 mm dia.
Replacement seal rings

31.0010.16 Replacement seal ring NBR for test sieves 200 mm/8“ dia.,
50 mm/2“ height, 200 mm dia., 25 mm height
31.0520.16 Replacement seal ring NBR for test sieves 100 mm dia.
84.0230.15 Replacement seal ring NBR (2 each for 33.1000.00)
Sieve pans made of stainless steel with and without outlet are also
available in 200 mm dia., 25 mm height and 8“ dia., 1“ height.
12
Order no. Article
Ordering example for test sieves in other diameters
TEST SIEVES 200 mm dia., 50 mm height,
200 mm dia., 25 mm height,
ANALYSETTE 3 PRO + SPARTAN 8“ dia., 2“ height,
Frame and mesh wire made of stainless steel 100 mm dia., 40 mm height
with compliance certificate
100 mm/200 mm/8“ dia. Deviation ISO 3310-1 ASTM
from standard mesh width E-11-1995
sieve size mm/µm mesh
Test sieve For example For example

5 mm mesh width, 30.1800.03 35.1800.03
200 mm dia.,
height 50 mm
ISO 3310-1 • Mesh width • mm/µm ASTM • E-11-1995 • mesh = standard size
Test sieve Replace 5th For example For example

Order no. 200 mm dia., Order no. 200 mm dia., 5 mm mesh width, position = ”0“ 30.1810.03 35.1810.03
50 mm height 50 mm height 200 mm dia., in the order no.
height 25 mm by ”1“
30.0000.03 63• mm
30.0080.03 45• mm Test sieve Replace 5th For example For example
30.0100.03 31.5• mm 5 mm mesh width, position = ”0“ 30.1820.03 35.1820.03
30.0200.03 25 mm 35.0200.03 1“ = 25 mm 8“ dia., height 2“ in the order no.
30.0300.03 22.4• mm 35.0300.03 7/8“ = 22.4 mm by ”2“
30.0400.03 20 mm
30.0500.03 19 mm 35.0600.03 3/4“ = 19 mm Test sieve Replace 5th For example For example
30.0600.03 18 mm 5 mm mesh width, position = ”0“ 30.1840.03 35.1840.03
30.0800.03 16• mm 35.0800.03 5/8“ = 16 mm 100 mm dia., in the order no.
30.0900.03 14 mm 35.0900.03 0.53“ = 13.2 mm height 40 mm by ”4“
30.1000.03 12.5 mm 35.1000.03 1/2“ = 12.5 mm
30.1100.03 11.2• mm 35.1100.03 7/16“ = 11.2 mm Test sieves and sieving accessories in other diameters and mesh widths on request.
30.1200.03 10 mm 35.1200.03 3/8“ = 9.5 mm Test sieves made of polyamide are available on request.
30.1300.03 9 mm Test sieves and sieving accessories can not be exchanged or returned!
30.1400.03 8• mm 35.1400.03 5/16“ = 8 mm
30.1500.03 7.1 mm 35.1500.03 0.265“ = 6.7 mm
30.1600.03 6.3 mm 35.1600.03 1/4“ = 6.3 mm MICRO-PRECISION SIEVES
30.1700.03 5.6• mm 35.1700.03 3 1/2 = 5.6 mm
30.1800.03 5 mm 35.1800.03 4 = 4.75 mm ANALYSETTE 3 PRO
30.1900.03 4.5 mm Frame made of stainless steel, sieve foil and grid made of pure nickel,
30.2000.03 4• mm 35.2000.03 5 = 4 mm 100 mm dia., according to ISO 3310-3
30.2100.03 3.55 mm 35.2100.03 6 = 3.35 mm
30.2200.03 3.15 mm
30.2300.03 2.8• mm 35.2300.03 7 = 2.8 mm
30.2400.03 2.5 mm 35.2400.03 8 = 2.36 mm
30.2500.03 2.24 mm
30.2600.03 2• mm 35.2600.03 10 = 2 mm
30.2700.03 1.8 mm
30.2800.03 1.6 mm 35.2800.03 12 = 1.7 mm
30.2900.03 1.4• mm 35.2900.03 14 = 1.4 mm Order no. Aperture width Open sieve area mesh = number
30.3000.03 1.25 mm 35.3000.03 16 = 1.18 mm µm =% of holes per
30.3100.03 1.12 mm linear inch
30.3200.03 1• mm 35.3200.03 18 = 1 mm
30.3300.03 900 µm 32.0050.00 Aperture width 5 µm 2.8 1016
30.3400.03 800 µm 35.3400.03 20 = 850 µm 32.0100.00 Aperture with 10 µm 11.2 1016
30.3500.03 710• µm 35.3500.03 25 = 710 µm 32.0150.00 Aperture with 15 µm 9.8 570
30.3700.03 560 µm 32.0250.00 Aperture with 25 µm 10.4 403
30.4700.03 180• µm 35.4700.03 80 = 180 µm
30.4800.03 160 µm 35.4800.03 100 = 150 µm
Ordering example for micro-precision sieves
30.4900.03 140 µm
Example of an order for a sieve stack with 4 micro-precision sieves:
30.5000.03 125• µm 35.5000.03 120 = 125 µm
1. 4 micro-precision sieves of choice
30.5100.03 112 µm
2. 1 clamping lid, aluminium/plexiglas with 1 nozzle (order no. 33.1050.00)
30.5200.03 100 µm 35.5200.03 140 = 106 µm
3. 1 funnel (sieve pan) made of aluminium with outlet (order no. 33.1150.00)
30.5400.03 90• µm 35.5400.03 170 = 90 µm
4. 5 sieve spacers made of aluminium with 2 seal rings (order no. 33.1000.00)
30.5600.03 80 µm
5. 6 fast locking clamps made of stainless steel (order no. 33.1100.00)
30.5700.03 75 µm 35.5800.03 200 = 75 µm
6. clamping set for micro-precision sieves with 100 mm dia.
30.5800.03 71 µm
Please note: one sieve spacer and two locking clamps more than the number of sieves
30.6000.03 63• µm 35.6000.03 230 = 63 µm
must be ordered.
30.6200.03 56 µm
30.6300.03 53 µm 35.6200.03 270 = 53 µm
30.6400.03 50 µm
30.6600.03 45• µm 35.6600.03 325 = 45 µm
30.6800.03 40 µm
30.6900.03 38 µm 35.7000.03 400 = 38 µm
30.7000.03 36 µm
30.7200.03 32• µm 35.7200.03 450 = 32 µm
30.7600.03 25• µm 35.7600.03 500 = 25 µm
30.7800.03 20• µm 35.7800.03 635 = 20 µm
• ISO 565 R20/3 (main sizes)
If you would like a test sieve in other diameters, please take note of the ordering
examples to the right.
Recertification of FRITSCH test sieves according to ISO 3310-1 on request.
13
FRITSCH ANALYSETTE 18
HEAVY DUTY ANALYTICAL SIEVE SHAKER TEST SIEVES

ANALYSETTE 18 ANALYSETTE 18
Frame and mesh wire made of stainless steel
with compliance certificate
400 mm dia., useful height 65 mm
Instrument without test sieves and sieve pan, incl. tensioning and
sieve cover
18.3020.00 for 230 V/1~, 50-60 Hz
Order no. Mesh width ASTM • E-11-1995
18.3010.00 for 115 V/1~, 50-60 Hz
ISO 3310-1 mm/µm mesh
Accessories for test sieves 400 mm dia.
34.0040.02 125• mm
37.1000.01 Sieve pan made of stainless steel 400 mm dia.
34.0050.02 100 mm
37.1100.01 Interposed sieve pan made of stainless steel 400 mm dia.
34.0060.02 90• mm
37.0010.16 Replacement seal ring NBR for test sieves 400 mm dia.
34.0000.02 63• mm
34.0080.02 45• mm
Accessories for automatic evaluation of sieve analysis
34.0100.02 31.5• mm
03.2900.00 Software AUTOSIEVE for Windows
34.0200.02 25 mm 1“ = 25 mm
for control and automatic evaluation of sieve analysis
34.0300.02 22.4• mm 7/8“ = 22.4 mm
34.0400.02 20 mm
Sieving aids
34.0600.02 18 mm ~ 3/4“ = 19 mm
37.0200.16 1 vulkollan cube (minimum 20 cubes per sieve)
34.0800.02 16• mm 5/8“ = 16 mm
Laboratory analysis balance, computer, colour ink jet printer and laser 34.0900.02 14 mm ~ 0.53“ = 13.2 mm
printer on request. 34.1000.02 12.5 mm ~ 1/2“ = 12.5 mm
34.1100.02 11.2• mm 7/16“ = 11.2 mm
34.1200.02 10 mm ~ 3/8“ = 9.5 mm
34.1300.02 9 mm
34.1400.02 8• mm 5/16“ = 8 mm
34.1500.02 7.1 mm ~ 0.265“ = 6.7 mm
34.1600.02 6.3 mm 1/4“ = 6.3 mm
34.1700.02 5.6• mm ~ no. 31/2 = 5.6 mm
34.1800.02 5 mm ~ no. 4 = 4.75 mm
34.2000.02 4• mm no. 5 = 4 mm
34.2100.02 3.55 mm no. 6 = 3.35 mm
34.2200.02 3.15 mm
34.2300.02 2.8• mm no. 7 = 2.8 mm
34.2400.02 2.5 mm ~ no. 8 = 2.36 mm
34.2600.02 2• mm no. 10 = 2 mm
34.2700.02 1.8 mm
34.2800.02 1.6 mm ~ no. 12 = 1.7 mm
34.2900.02 1.4• mm no. 14 = 1.4 mm
34.3000.02 1.25 mm ~ no. 16 = 1.18 mm
34.3100.02 1.12 mm
34.3200.02 1• mm no. 18 = 1 mm
34.3300.02 900 µm
34.3400.02 800 µm ~ no. 20 = 0.85 mm
34.3500.02 710• µm no. 25 = 0.71 mm
34.3600.02 630 µm ~ no. 30 = 0.6 mm
34.3700.02 560 µm
34.3800.02 500• µm no. 35 = 0.5 mm
34.3900.02 450 µm
34.4000.02 400 µm ~ no. 40 = 0.425 mm
34.4100.02 355• µm no. 45 = 0.355 mm
34.4200.02 315 µm ~ no. 50 = 0.3 mm
34.4300.02 280 µm
34.4400.02 250• µm no. 60 = 0.25 mm
34.4500.02 224 µm
34.4600.02 200 µm ~ no. 70 = 0.212 mm
34.4700.02 180• µm no. 80 = 0.18 mm
34.4800.02 160 µm ~ no. 100 = 0.15 mm
34.4900.02 140 µm
34.5000.02 125• µm no. 120 = 0.125 mm
34.5100.02 112 µm
34.5200.02 100 µm ~ no. 140 = 0.106 mm
34.5400.02 90• µm no. 170 = 0.09 mm
34.5600.02 80 µm
34.5800.02 71 µm ~ no. 200 = 0.075 mm
34.6000.02 63• µm no. 230 = 0.063 mm
• ISO (standard international)
When ordering test sieves, please quote if the sieves should be delivered according to
ISO 3310-1 or ASTM.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mentioned mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
14 Technical specifications are subject to change without notice.

Classic Line: Planetary Mills

Uploaded by

Copyright:

Available Formats

Classic Line: Planetary Mills

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Classic Line: Planetary Mills

Uploaded by

Copyright:

Available Formats

FRITSCH · PLANETARY MILLS classic line

THE LABORATORY STANDARD

• Safe clamping of the bowls with the Safe-Lock-System

• Simple, ergonomic handling and easy cleaning

avoidance of contamination through abrasion

The FRITSCH family business is an internationally respected manufacturer of

application-orientated laboratory instruments. In 1961 FRITSCH applied for a

F R I T S C H . one step ahead .

research laboratories worldwide.

of emulsions and pastes or for mechanical alloying and

activation in material research. Specific application examples

Planetary Mill PULVERISETTE 5 classic line

Fast and fine

4 working stations 2 working stations

Working principle Impact force Impact force

Effective diameter of main disk ~ 250 mm ~ 250 mm

Motor shaft power in accordance with

Planetary Mono Mill Planetary Micro Mill Vario-Planetary Mill

Impact force Impact force Impact force

i relative = 1 : –1.82 i relative

121.6 mm 140 mm ~ 250 mm

2.2 kW supporting disk,

• Adjustable timer accurate to one second

• Suitable for grinding hard to soft materials, including in suspensions

• Perfect for homogenising of emulsions and pastes

• Simultaneous processing of up to 8 samples

• Useful capacity up to 4 x 225 ml

• Bowl sizes 80 ml, 250 ml, 500 ml volume

Also available: The p-5 classic line

The ideal Planetary Mill: Quick and reliable thanks to the

Biology Plants, leaves, freeze-dried samples

AT Pharmaceuticals Ophthalmological agents, gels, creams, extracts,

FACTS AND ADVANTAGES

The PULVERISETTE 6 classic line is a high-per formance

Imbalance compensation with simple Practical: The membrane keyboard can

Biology Plants, leaves, freeze-dried samples

AT Pharmaceuticals Ophthalmological agents, gels, creams, extracts,

FACTS AND ADVANTAGES

IDEAL FOR SMALLEST QUANTITIES

The PULVERISETTE 7 classic line is ideally suited to fast,

FACTS AND ADVANTAGES

• Rotational speed up to 400 rpm

• Ideal for mechanical alloying and activating

• Simultaneous processing of up to 4 samples

• Specially suited for material research and development applications

• Ultimate fineness down to 0.1 µm

• Useful capacity of 2 x 0.5 ml to 2 x 225 ml

• Bowl sizes 12 ml, 45 ml, 80 ml, 250 ml and 500 ml capacity

Par ticularly versatile: The FRITSCH

The PULVERISETTE 4 grinding in inert gas

X-ray structure analysis, chromatography

FACTS AND ADVANTAGES

• For use with PULVERISETTE 4, PULVERISETTE 5 and PULVERISETTE 6

• Data evaluation via PC

• Range of pressure build up to 15 m

• Operating time with fully charged battery approx. 80 h

• Sleep mode of the radio transmitter with consistent measurement signals

transform them into analytical measurement

GRINDING BOWLS AND GRINDING BALLS

• For use with PULVERISETTE 4, PULVERISETTE 5 and PULVERISETTE 6

Grinding balls 30 mm diameter

Grinding balls 15 mm diameter