Scribd
Upload
234 views1 page

CAN Troubleshooting Quick Reference v1.1

This document provides a quick reference guide for troubleshooting CAN bus issues. It includes a series of tests to help identify common problems, such as short circuits, open circuits, incorrect termination resistors, and faulty nodes. The guide recommends checking termination resistors, voltage levels, wire continuity, and individual node transceivers to diagnose issues on the CAN bus network. Downloading the full sheet from CANbusAcademy.com provides additional troubleshooting techniques and information on online and in-person CAN bus training courses.

Uploaded by

Lohidas Paila
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
234 views1 page

CAN Troubleshooting Quick Reference v1.1

This document provides a quick reference guide for troubleshooting CAN bus issues. It includes a series of tests to help identify common problems, such as short circuits, open circuits, incorrect termination resistors, and faulty nodes. The guide recommends checking termination resistors, voltage levels, wire continuity, and individual node transceivers to diagnose issues on the CAN bus network. Downloading the full sheet from CANbusAcademy.com provides additional troubleshooting techniques and information on online and in-person CAN bus training courses.

Uploaded by

Lohidas Paila
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

CANbus Academy CAN bus Troubleshooting - Quick Reference

Disclaimer: information furnished herein is


- - GND Visit CANbusAcademy.com to believed to be accurate and reliable, however,
Node 1 Node n V2 V1 download this sheet for FREE, no responsibility is assumed for any errors. The
+ + and learn about our online &
user assumes full responsibility for the
CAN HIGH accuracy and appropriateness of this
onsite CAN Troubleshooting information. The recommendations and
120Ω 120Ω Ω1 =60Ω Course for Engineers and Techs techniques presented have been used to solve
CAN LOW many CAN bus issues.

0Ω-5Ω
Bus Termination Test CANH & L Shorted?

y
Check Faulty Nodes
30Ω-50Ω Too Many Resistors?
Turn Off Power What is Ω1? Below 50Ω

em
110Ω-140Ω
Nominal: 60Ω Missing One resistor?

d
Typical 55Ω-65Ω

a
1kΩ-10kΩ

c
Above 70Ω Missing Two Resistors?

A
>MΩ
H or L open circuit?

Voltage Test

bus Flipped H & L Wires?

N
V1, V2
No
Turn On Power DC Volt Test between 2v and Outside Range

A
Check wire continuity
4v?

C
Yes
OK Check Faulty Nodes
0Ω-100Ω
Node Transceiver Test Turn Off Fail Shorted
Node Ω2 Power
CAN HIGH What is Use identical working
CAN Ω2,Ω3,Ω4?
Transceiver CAN LOW Ω4 component as reference
Disconnect
Ω3 CAN >MΩ
Fail Open
!
CANbus Academy
You may share (copy & redistribute) this
document, as long as you give appropriate credit. License: CC BY-NC-ND 4.0 Version 1.1

You might also like