LI4278 LINEAR IMAGER

QUICK START GUIDE Cradles

NOTE: The scanner must be paired to the cradle prior to scanning in standard
or presentation mode.

1
See Product Reference Guide for detailed information
3
http://www.zebra.com/li4278

2
4

1 Scan Window
2 Scan Trigger
3 LED
POST IN WORK AREA

4 Beeper

Refer to the LI4278 Product Reference Guide, or the cradle

Quick Reference Guides for detailed information about cradle setup.
When charging, use the cradle power supply for faster charge time.

STEP 1 - CRADLE CABLE CONNECTIONS STEP 2 - PAIRING SCANNER TO CRADLE

There are two methods available to pair (marry) the scanner to the cradle:
scan the pairing bar code or pair on contacts by inserting the scanner into
the cradle. Each cradle type has its own default pairing method. When the
Bluetooth connection beep sounds the scanner and cradle are connected.
- Presentation cradle default (pair on contacts): cradle and scanner are
paired when the scanner is inserted into the cradle.
- Standard cradle default (scan pairing bar code): cradle and scanner are
paired when the user scans the pairing bar code on the cradle.

Power Port Note: When pair on contacts is enabled you may still use the scan pairing
Host Port bar code method. You can enable or disable the pair on contacts method
Power Port for either cradle type by scanning the appropriate pairing method
programming bar code from the LI4278 Product Reference Guide.
Host Port

Standard Cradle
Alternate Host Groove

Alternate Power Groove Host

Power
Host Port
Power
(if required)

Presentation Cradle
Connect to
Appropriate Host

Connect to
Appropriate Host
Power

Power Port Important: Charge the linear imager scanner for 24 hours before the first full day of use.

STEP 3 - CONNECT HOST INTERFACE STEP 4 - SET UP INTERFACE (Scan Host Bar Codes) STEP 5 - RADIO COMM HOST TYPES
NOTE: Cables may vary depending on configuration

RS-232 RS-232 Radio Communications Host Types

Scan ONE of the bar codes below Scan a bar code below to choose how the scanner connects to
a remote device. Scan CRADLE HOST if connecting to the
CR0078 cradle. Refer to the Product Reference Guide for
detailed information.

STANDARD RS-232

NIXDORF RS-232 MODE B

CRADLE HOST

ICL RS-232
OR
FUJITSU RS-232

HID PROFILE (SLAVE)

NIXDORF RS-232 MODE A

OPOS/JPOS

USB USB
Scan ONE of the bar codes below
SERIAL PORT PROFILE (SLAVE)

HID KEYBOARD EMULATION

IBM HAND-HELD USB

OR
IBM TABLE TOP USB
SERIAL PORT PROFILE (MASTER)

USB OPOS HAND-HELD

SNAPI WITHOUT IMAGING

(For use with hands-free base only)
Unpairing/Disconnection
SIMPLE COM PORT EMULATION

USB CDC Host

UNPAIR/DISCONNECT

IBM 46XX IBM 46XX

Scan ONE of the bar codes below

PORT 5B

OR
PORT 9B

PORT 17

Keyboard Wedge Keyboard Wedge

Scan bar code below

Power
supply
optional IBM PC/AT and IBM PC COMPATIBLE
OR

HELPFUL BAR CODES 123SCAN

SET DEFAULTS
123Scan is an easy-to-use , PC-based software tool that enables
BATTERY OFF rapid and easy customized setup via a bar code or USB cable. For
RETURN TO FACTORY DEFAULTS
more information, visit: http://www.zebra.com/123Scan.

BATTERY OFF FOR LONG TERM STORAGE/SHIPPING

LI4278 LINEAR IMAGER

POST IN WORK AREA

SCANNING
Aiming

012345 012345
 RECOMMENDED USAGE GUIDE - OPTIMUM BODY POSTURE
Avoid Extreme Wrist Angles Avoid Bending Avoid Reaching Health and Safety Recommendations
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic
injury follow the recommendations below. Consult with your local
Health & Safety Manager to ensure that you are adhering to your
company’s safety programs to prevent employee injury.

• Reduce or eliminate repetitive motion. • Reduce or eliminate vibration.

AVOID BENDING
• Maintain a natural position. • Reduce or eliminate direct pressure.
• Reduce or eliminate excessive force. • Provide adjustable workstations.
• Keep objects that are used frequently • Provide adequate clearance.
AVOID EXTREME
WRIST ANGLES
AVOID REACHING
within easy reach. • Provide a suitable working environment.
• Perform tasks at correct heights. • Improve work procedures.

BEEPER INDICATIONS LED INDICATIONS

Standard Use Hand-Held Scanning
Low/medium/high beep Short medium beep 4 long low beeps 4 short beeps Off Green Red

Power up Bar code decoded Transmission error detected; Low battery Scanner is on and ready to scan, Bar code is successfully decoded Transmission error
data is ignored or no power to scanner

Parameter Menu Scanning Hands-Free (Presentation) Scanning

High/low/high/low beep Off Green Off Momentarily Red
High/low beep Low/high beep

Successful Correct programming Incorrect programming sequence No power to Scanner is ready Bar code is Transmiss
parameter setting sequence performed or “Cancel” bar code scanned scanner to scan successfully decoded

Wireless Operation Charging

High/low/high/low beep High/low beep Low/high beep Off Green - Slow Continuous Green - Fast Continuous Green - Solid

Pairing bar code Bluetooth Bluetooth connection No power to Non-critical battery Scanner is charging Scanner is fully
scanned disconnection established scanner temperature fault
Local Contact:

TROUBLESHOOTING
Scanner not working Scanner not decoding bar code
No power to scanner Scanner is disabled Scanner not programmed Bar code unreadable Distance between scanner
for bar code type and bar code incorrect
Check system power; battery may be discharged; Ensure that correct host Ensure bar code is not defaced;
charge scanner in cradle; check battery door is closed; interface cable is used Ensure scanner is programmed to read try scanning test bar code of same Move scanner closer to
ensure battery end cap is secured type of bar code being scanned bar code type or further from bar code

Scanner decoding bar code, but data not transmitting to host Scanned data incorrectly displayed on host
Scanner not programmed for Scanner not paired to Interface cable is loose Cradle lost connection to host Scanner not programmed for correct host i nterface
correct host interface host-connected interface
Ensure all cable connections In this order: disconnect power supply; disconnect Scan appropriate host parameter bar codes
Scan appropriate host Pair the scanner to are secure host cable; wait three seconds; reconnect host
parameter bar codes the cradle cable; reconnect power supply; reestablish pairing

LED indicates low battery start-up LED indicates battery temperature

Low battery start-up Cradle communication error Battery is above or below normal operating temperature
Wait for red LED to turn green Inspect contacts; remove and reinsert Do not use scanner; move scanner to location with normal operating temperature;
indicating scanner is charging scanner in cradle refer to the Product Reference Guide for more information

HELPFUL BAR CODES

ADD AN ENTER KEY To add an Enter key after scanned data, scan ADD A TAB KEY To add a Tab key after scanned data, scan all THREE Enter key bar codes (left)
(Carriage Return/Line Feed) all THREE bar codes in numerical order. in numerical order then scan all FIVE bar codes below in numerical order.
1 3 2 4

SCAN OPTIONS 2 7 3 0 5
ENTER 1

<DATA><SUFFIX 1>
SCAN SUFFIX 0 9

REGULATORY INFORMATION
Zebra reserves the right to make changes to any product to improve reliability, function, or design.
Zebra does not assume any product liability arising out of, or in connection with, the application or use of any Bluetooth® Wireless Technology Battery Safety Guidelines
product, circuit, or application described herein. No license is granted, either expressly or by implication, This is an approved Bluetooth® product. For more information or to view End Product Listing, please visit • The area in which the units are charged should be clear of debris and combustible materials or chemicals.
estoppel, or otherwise under any patent right or patent, covering or relating to any combination, system, https://www.bluetooth.org/tpg/listings.cfm. Particular care should be taken where the device is charged in a non commercial environment.
apparatus, machine, material, method, or process in which Zebra products might be used. An implied license • Follow battery usage, storage, and charging guidelines found in the user's guide.
exists only for equipment, circuits, and subsystems contained in Zebra products. Wireless Device Country Approvals • Improper battery use may result in a fire, explosion, or other hazard.
Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved
• To charge the mobile device battery, the battery and charger temperatures must be between +32 ºF
for use in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe 1,2. and +104 ºF (0 ºC and +40 ºC)
Power Supply • Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a
Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at
Use only approved power supply. The power supply shall be Listed to UL/CSA 60950-1 and certified to risk of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a
http://www.zebra.com/doc.
IEC60950-1 and EN60950-1 with SELV outputs. Use of alternative power supply will invalidate any approval battery or a charger, contact Zebra Global Customer Support Center.
given to this device and may be dangerous. Note1: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, • For devices that utilize a USB port as a charging source, the device shall only be connected to products
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, that bear the USB-IF logo or have completed the USB-IF compliance program.
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, • Do not disassemble or open, crush, bend or deform, puncture, or shred.
Warranty
For the complete Zebra hardware product warranty statement, go to: Spain, Sweden, Switzerland and the United Kingdom. • Severe impact from dropping any battery-operated device on a hard surface could cause the battery
http://www.zebra.com/warranty. to overheat.
Note 2: The use of RFID Devices have varying restrictions of use; please refer to the Zebra
Declaration of Conformity (DoC) for details. • Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to
For Australia Only water or other liquids, or expose to fire, explosion, or other hazard.
This warranty is given by Zebra Technologies Asia Pacific Pte. Ltd., 71 Robinson Road, #05-02/03, Singapore Operation of the device without regulatory approval is illegal. • Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle
068895, Singapore. Our goods come with guarantees that cannot be excluded under the Australia Consumer Law.
You are entitled to a replacement or refund for a major failure and compensation for any other reasonably
Frequency of Operation – FCC and IC or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of 2.4 GHz Only • Battery usage by children should be supervised.
acceptable quality and the failure does not amount to a major failure. The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels • Please follow local regulations to promptly dispose of used re-chargeable batteries.
Zebra Technologies Corporation Australia’s limited warranty above is in addition to any rights and remedies you is limited by firmware. • Do not dispose of batteries in fire.
may have under the Australian Consumer Law. If you have any queries, please call Zebra Technologies • Seek medical advice immediately if a battery has been swallowed.
Corporation at+65 6858 0722. You may also visit our website: http://www.zebra.com for the most updated
warranty terms. Warnings for Use of Wireless Devices
Radio Frequency Interference Requirements -FCC
Service Information Please observe all warning notices with regard to the usage of wireless devices. Note: This equipment has been tested and found to comply with the
If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If there is a problem Tested to comply limits for a Class B digital device, pursuant to Part 15 of the
Safety in Aircraft with FCC Standards
with the equipment, they will contact the Zebra Global Customer Support Center at: http://www.zebra.com/support. For FCC rules. These limits are designed to provide reasonable
Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your
the latest version of this guide go to: http://www.zebra.com/support. FOR HOME OR OFFICE USE protection against harmful interference in a residential
device offers a ‘flight mode’
installation. This equipment generates, uses and can radiate
or similar feature, consult airline staff as to its use in flight.
radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or
Waste Electrical and Electronic Equipment (WEEE) Safety in Hospitals television reception, which can be determined by turning the equipment off and on, the user is
English: For EU Customers: All products at the end of their life must be returned to
potražite na web-stranici: www.zebra.com/weee.
Wireless devices transmit radio frequency energy and may affect medical electrical equipement. encouraged to try to correct the interference by one or more of the following measures:
Zebra for recycling. For information on how to return product, please go to:
http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui, turi Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or
būti grąžinti utilizuoti į kompaniją „Zebra“. Daugiau informacijos, kaip grąžinti health care facilities. These requests are designed to prevent possible interference with sensitive • Reorient or relocate the receiving antenna
Bulgarish: За клиенти от ЕС: След края на полезния им живот всички
gaminį, rasite: http://www.zebra.com/weee.
продукти трябва да се връщат на Zebra за рециклиране. За информация medical equipment. • Increase the separation between the equipment and receiver
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra
относно връщането на продукти, моля отидете на адрес:
http://www.zebra.com/weee. vállalathoz kell eljuttatni újrahasznosítás céljából. A termék visszajuttatásának • Connect the equipment into an outlet on a circuit different from that to which the
módjával kapcsolatos tudnivalókért látogasson el a http://www.zebra.com/weee
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich Pacemakers receiver is connected
weboldalra.
životnosti vrátit spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení
produktu najdete na webové stránce: http://www.zebra.com/weee.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' l-użu Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a • Consult the dealer or an experienced radio/TV technician for help.
tagħhom, iridu jiġu rritornati għand Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif handheld wireless device and a pacemaker to avoid potential interference with the pacemaker. Radio Transmitters (Part 15)
de er udtjent. Læs oplysningerne om returnering af produkter på:
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde van These recommendations are consistent with independent research and recommendations by This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
http://www.zebra.com/ weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer
hun levensduur naar Zebra te worden teruggezonden voor recycling. Raadpleeg Wireless Technology Research. (1) this device may not cause harmful interference, and
http://www.zebra.com/weee voor meer informatie over het terugzenden van
Lebensdauer zum Recycling an Zebra zurückgesandt werden. Informationen zur
producten. (2) this device must accept any interference received, including interference that may cause
Rücksendung von Produkten finden Sie unter http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksploatacji Persons with Pacemakers: undesired operation.
nale¿y zwróciæ do firmy Zebra w celu ich utylizacji. Informacje na temat zwrotu
ζωής τους, πρέπει να επιστρέφονται στην Zebra για ανακύκλωση. Για
produktów znajduj¹ siê na stronie internetowej http://www.zebra.com/weee. • Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON. Radio Frequency Interference Requirements - Canada
περισσότερες πληροφορίες σχετικά με την επιστροφή ενός προϊόντος,
Português: Para clientes da UE: todos os produtos no fim de vida devem ser • Should not carry the device in a breast pocket.
επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο Διαδίκτυο.
devolvidos à Zebra para reciclagem. Para obter informações sobre como devolver
This Class B digital apparatus complies with Canadian ICES-003.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
taaskasutamise eesmärgil Zebra'ile. Lisainformatsiooni saamiseks toote
o produto, visite: http://www.zebra.com/weee. • Should use the ear furthest from the pacemaker to minimise the potential for inter¬ference.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei lor de
tagastamise kohta külastage palun aadressi: http://www.zebra.com/weee.
funcţionare, trebuie returnate la Zebra pentru reciclare. Pentru informaţii despre • If you have any reason to suspect that interference is taking place, turn OFF your device. Radio Transmitters
Español: Para clientes en la Unión Europea: todos los productos deberán
returnarea produsului, accesaţi: http://www.zebra.com/weee. This device complies with RSS 210 of Industry Canada. Operation is subject to the following two conditions:
entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si desea Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po uplynutí
más información sobre cómo devolver un producto, visite: doby ich životnosti vrátené spoločnosti Zebra na recykláciu. Bližšie informácie o Other Medical Devices (1) this device may not cause harmful interference and
http://www.zebra.com/weee. vrátení výrobkov nájdete na: http://www.zebra.com/weee. Please consult your physician or the manufacturer of the medical device, to determine if the operation (2) this device must accept any interference received, including interference that may cause undesired
Français : Clients de l'Union Européenne : Tous les produits en fin de cycle de Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe
vie doivent être retournés à Zebra pour recyclage. Pour de plus amples vrniti podjetju Zebra za reciklažo. Za informacije o vraèilu izdelka obišèite: of your wireless product may interfere with the medical device. operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils
informations sur le retour de produits, consultez : http://www.zebra.com/weee. http://www.zebra.com/weee. radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava (1) le dispositif ne doit pas produire de brouillage préjudiciable, et
rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il
riciclaggio. Per informazioni sulle modalità di restituzione, visitare il seguente sito
kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen
palauttamisesta on osoitteessa http://www.zebra.com/weee.
RF Exposure Guidelines (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un
Web: http://www.zebra.com /weee. Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd måste fonctionnement indésirable.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir returneras till Zebra för återvinning. Information om hur du returnerar produkten Safety Information Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada
jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai iegūtu informāciju par produktu finns på http://www.zebra.com/weee.
nogādāšanu Zebra, lūdzu, skatiet: http://www.zebra.com/weee. Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme
Reducing RF Exposure – Use Properly technical specifications were met.
Hrvatski: Za kupce u Europskoj uniji: Svi se proizvodi po isteku vijeka trajanja için Zebra'ya iade edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için Only operate the device in accordance with the instructions supplied.
moraju vratiti tvrtki Zebra na recikliranje. Informacije o načinu vraćanja proizvoda lütfen şu adresi ziyaret edin: http://www.zebra.com/weee.
International
The device complies with internationally recognized standards covering human exposure to electromagnetic Marking and European Economic Area (EEA)
fields from radio devices. For information on “International” human exposure to electromagnetic fields refer

TURKISH WEEE Statement of Compliance to the Zebra Declaration of Conformity (DoC) at http://www.zebra.com/doc. Statement of Compliance
EEE Yönetmeliğine Uygundur Zebra hereby declares that this radio equipment is in compliance with Directive 2011/65/EU and
LED Devices 1999/5/EC or 2014/53/EU (2014/53/EU supersedes 1999/5/EC from 13th June 2017).
Health and Safety Recommendation Complies with IEC/EN60825-1:2001 & EN 62471: 2008 and IEC62471: 2006 Class 1 LED output.
Other Countries
Ergonomic Recommendations LED Output – this device contains two LEDs for illumination and aiming. Brazil
Aim/Illumination Optical Declarações Regulamentares para LI4278
Caution: In order to avoid or minimize the potential risk of ergonomic injury Output: 0.87mW Pulse NOTA: A marca de certificação se aplica ao Equip. de Radiação Restrita, modelo LI4278.
follow the recommendations below. Consult with your local Health & Safety Duration: Continuous Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência
Manager to ensure that you are adhering to your company's safety programs Emitted Wavelength: 590-650nm prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando
to prevent employee injury. em caráter primário.” Para maiores consultas sobre ANATEL consulte o site: www.anatel.gov.br.
• Reduce or eliminate repetitive motion Viewing the LED output with certain optical instruments (for example, eye loupes, magnifiers Mexico
• Maintain a natural position and microscopes) may pose an eye hazard. Restrict Frequency Range to: 2.450 - 2.4835 GHz.
Caution: Use of controls or adjustments or performance of procedures other than those S. Korea
• Reduce or eliminate excessive force
specified herein may result in hazardous LED light exposure. For a radio equipment using 2400~2483.5MHz or 5725~5825MHz, the following two expressions
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights should be displayed:
Statement of Compliance ‫׼‬೧ ‫ޖࢶࢸ࠺ח‬ ‫ ޖ‬਍ਊ ઺ ੹౵ഒन оࢿ‫ ੉מ‬੓਺
• Reduce or eliminate vibration Zebra hereby declares that this radio equipment is in compliance with Directive 2011/65/EU and 1999/5/EC ‫׼‬೧ ‫੹ޖࢶࢸ࠺ ח‬౵ഒ न оࢿ‫ ੉מ‬੓ਵ ‫޲۽‬
• Reduce or eliminate direct pressure or 2014/53/EU (2014/53/EU supersedes 1999/5/EC from 13th June 2017). The full text of the EU Declaration ‫ੋݺ‬উ੹ җ ҙ ۲ ࠺ࢲ ‫ػ‬झ‫ ח‬ೡ ࣻ হण‫פ׮‬.
• Provide adjustable workstations of Conformity is available at the following internet address: http://www.zebra.com/doc.
Eurasian Customs Union
• Provide adequate clearance
• Provide a suitable working environment EAC.
Batteries Ukraine
• Improve work procedures. Taiwan - Recycling This equipment corresponds to requirements of the Technical Regulation No. 1057, 2008 on restrictions
as to the use of some dangerous substances in electric and electronic devices.
This guide applies to Model Number: LI4278. All Zebra devices are designed to be compliant with rules
and regulations in locations they are sold and will be labeled as required. Local language translations Taiwan 臺灣 低功率電波輻射性電
are available at the following website: http://www.zebra.com/support. 機管理辦法 第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、 商號或使用者均不得
Any changes or modifications to Zebra Technologies equipment, not expressly approved by 擅自變更頻率、加大功率或變更原設計之特性及功能。
Zebra Technologies, could void the user’s authority to operate the equipment. EPA (Environmental Protection Administration) requires dry battery producing or importing firms in
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾
現象時， 應立即停用，並改善至無干擾時方得繼續使用。 前項合法通信，指依電
accordance with Article 15 of the Waste Disposal Act are required to indicate the recycling marks 信規定作業之 無線電通信。
on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper
battery disposal. 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
Battery Information
Zebra rechargeable battery packs are designed and constructed to the highest standards
Japan (VCCI) - Voluntary Control Council for Interference
within the industry. However, there are limitations to how long a battery can operate or be stored before Class B ITE
needing replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh B
environmental conditions and severe drops. When batteries are stored over six (6) months, some
irreversible deterioration in overall battery quality may occur. Store batteries at half of full charge in a dry,
Zebra Technologies Corporation cool place, removed from the equipment to prevent loss of capacity,
Lincolnshire, IL U.S.A. rusting of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge
http://www.zebra.com level should be verified at least once a year and charged to half of full charge. Replace the battery when
a significant loss of run time is detected. Standard warranty period for batteries is 30 days, Korea Warning Statement for Class B ITE
© 2018 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized regardless if the battery was purchased separately or included as part of the mobile computer or bar
Zebra head are trademarks of ZIH Corp, registered in many jurisdictions worldwide. code scanner.
All other trademarks are the property of their respective owners.

72-154896-06 Revision A - January 2018

LI4278 LINEAR IMAGER