Civil Engineering Student (DOF < 500)

Structural Design Report

Project Rumah Tinggal 2 Lan
Location Kel.Manuaman-Kec. Atambua Selat

Job Name
Structural Design

Copyright (c) - 23 03 2021

TABLE OF CONTENTS

Table of Contents
Foreword
Licensee

1. Structural Data
2. Building Codes
3. Material Properties
4. Load Calculation
5. Soil Properties
6. Earthquake Load
7. Structural Modeling
8. Structural Layout
9. Dynamic Analysis Output
10. Support Reactions
11. Nodal Displacements
12. Moment Diagrams
13. Capacity Design
14. Element Design Results
15. Shearwall Design
16. Foundation Design
17. Volume and Cost

ATTACHMENTS:

1. Building Design Results (*.BTR)

2. Capacity Design Results (*.C0?)
3. Foundation and Pilecap Design Calculation (*.FND)
4. Soil Investigation Report
5. Special Material and Load Data

Page 2
FOREWORD

This is a structural design report for Project Rumah Tinggal 2 Lantai

Located at Kel.Manuaman-Kec. Atambua Selatan

Perhitungan Struktur Rumah Tinggal 2 Lantai a.n. Juanda Habeahan

We want to thank all parties that have contributed in preparation of this report

Structural Engineer

Civil Engineering Student (DOF < 500)

DISCLAIMER

This report is generated by using computer program SANSPRO 5.10

Licensed by Civil Engineering Student (DOF < 500) from ESRC (Engineering Software &
Research Center).
The program is Copyright (C) of Nathan Madutujuh. All rights reserved.
The usage of this report and any results causes by it are wholly responsibility of
Civil Engineering Student (DOF < 500) as the user of this program.
For more info, please contact: www.esrcen.com or e-mail: [email protected]

Page 3
1. STRUCTURAL DATA

Project Name : Rumah Tinggal 2 Lantai

Project Function : General Building
Project Location : Kel.Manuaman-Kec. Atambua Selatan
Project Owner : Juanda Habeahan
Architect Consultant :
Structural Consultant :
Building Contractor :
Building Name : Rumah Tinggal 2 Lantai

Structure Model = 9 : Building1

Structure Material = 1 : Concrete
Structure Type = 0 : DuctileFrame
Design Method = 2 : Capacity
Design Code = 14 : PBI-2013
Steel Design Option = 1 : Linear
Importance Factor I = 1

Analysis Method = 1 : Static

Linearity Model = 1 : Linear Static
Rigid Floor Option = YES
Gravity Acceleration = 981.00000
Condensation Level = 2
P-Delta Effects = 0
P-Delta Ductility Factor = 1.000
Include Slab Thickness for Beam Weight = 0
Use Effective Concrete Inertia = YES
Effective Inertia of Concrete Beam (Percent) = 50.000 (Tee Section)
Effective Inertia of Concrete Beam (Percent) = 25.000 (Rect Section)
Effective Inertia of Concrete Slab (Percent) = 25.000
Effective Inertia of Concrete Column (Percent) = 70.000
Effective Inertia of Concrete Shrwal (Percent) = 70.000 35.000
Effective Inertia of Steel Column (Percent) = 80.000
Effective Inertia of Steel Beam (Percent) = 80.000
Effective Inertia of Steel Truss (Percent) = 80.000
Use Rigid End Zone for Beam = 0
Stiffness Option for Plane Stress/Strain = 0
Shell FEM Formulation Method = 3

Page 4
2. Design Codes

1. SNI-1727-2013, Beban Minimum untuk Perancangan Bangunan Gedung dan Struktur Lain
2. SNI-1726-2012, Standar Perencanaan Ketahanan Gempa untuk Struktur Bangunan Gedung
3. RSNI-1726-2017, Peta Sumber dan Bahaya Gempa Indonesia, 2017
4. SNI-03-2847-2013, Tata Cara Perhitungan Struktur Beton untuk Bangunan Gedung
5. SNI-1729.1-2013, Spesifikasi untuk Bangunan Gedung Baja Struktural
6. SNI-1729.2-2013, Ketentuan Seismik untuk Struktur Bangunan Gedung Baja ()
7. SNI-1729.3-2013, Sambungan terprakualifikasi untuk Rangka Baja Momen Khusus dan Menengah
8. SNI-2833-2008, Standar Perencanaan Ketahanan Gempa untuk Jembatan
9. SNI-1727-1989-F, Tata Cara Perencanaan Pembebanan untuk Rumah dan Gedung
10. Persyaratan Umum Bahan Bangunan di Indonesia PUBI 1982

Additional Codes:

1. ASCE 7-16, Minimum Design Loads for Buildings and Other Structures
2. ACI 318M-2014, Building Code Requirements for Reinforced Concrete, ACI, 2014
3. AISC 360-16, Specification for Structural Steel Buildings
4. AISC 303-16, Code of Standard Practice for Steel Buildings and Bridges
5. AASHTO LRFD Bridge Design Specifications, 7th Ed, with 2015,2016 Revisions
6. International Building Code, 2003
7. American Welding Society, Structural Welding Code, AWS, USA
8. Recommended Practice for Design and Construction of Parking Structure, PCI
9. Recommended Practice for Floor Diaphragm, PCI
10. NIST-GCR.16-917-42 Seismic Design of Reinforced Concrete Special Moment Frames (2nd Ed)
11. NIST-GCR.16-917-42 Seismic Design of Steel Special Moment Frames (2nd Ed)
12. NIST-GCR.16-917-42 Seismic Design of Cast-in-Place Concrete Diaphragms, Chords, and Collectors (2nd Ed
13. NIST-GCR.10-917-5 Nonlinear Structural Analysis For Seismic Design
14. NIST-GCR.11-917-10 Seismic Design of Composite Steel Deck and Concrete-filled Diaphragms
15. NIST-GCR.11-917-11 Seismic Design of Cast-in-Place Concrete Special Structural Walls and Coupling
Beams, Rev1
16. NIST-GCR.12-917-22 Seismic Design of Reinforced Concrete Mat Foundations
17. NIST-GCR.13-917-24 Seismic Design of Steel Special Concentrically Braced Frame Systems
18. NIST-GCR.15-917-34 Seismic Design of Steel Buckling-Restrained Braced Frames
19. NIST-GCR.16-917-38 Seismic Design of Cold-Formed Steel Lateral Load-Resisting Systems

NOTES: The latest AISC and NIST Codes are free to download from respective sites.

Page 5
3. Material Properties

// PLEASE REPLACE THIS WITH YOUR OWN MATERIAL

a. Concrete Material:

Kolom/Wall : K-300
Balok: K-300
Pelat: K-300
Pelat Basement: K-300
Retaining Wall: K-300
Pilecap: K-300
Sloof: K-300
Bored Pile : K-300 (>= D80), K-250 (< D80)
Precast Pile : K-450
HCS : K-450
Tangga: K-300
Listplank dan lain2: K-225
Non-struktural: K-175
Lantai kerja: K-125

b. Steel Material:

Semua Tulangan: U-40, Ulir, D >= 10mm,

Fy=3900 kg/cm2
Tulangan polos: U-24, polos, D < 10mm, Fy =
2400 kg/cm2
Baja Profil dan Pelat: BJ-37, Fu=3700 kg/cm2,
Fy=2400 kg/cm2
Wiremesh: U-50 (hanya untuk pelat biasa
/ non flat-slab)

c. Welding:

Electrode : AWS E-70XX

Page 6
4. Load Calculation

a. Unit Weight of Materials

----------------------------------------------
Material Weight Unit
----------------------------------------------
Beton bertulang 2400 Kg/m3
Beton polos 2100 Kg/m3
Baja 7850 Kg/m3
Pasir 1800 Kg/m3
Tanah urug 2000 Kg/m3
Dinding bata 15cm 250 Kg/m2
Dinding Hebel 600 Kg/m3
Adukan 2000 Kg/m3
Plafond,ducting,lampu 20 Kg/m2
Lantai granit 2600 Kg/m3
Batu pecah 1450 Kg/m3
Sirtu 1850 Kg/m3
Pasangan batu kali 1800 Kg/m3
Air 1000 Kg/m3
Dinding partisi 50 Kg/m2
Lantai teraso, t=1cm 22 Kg/m2
Aspal campur 2200 Kg/m3
Atap genteng+reng/kaso 50 Kg/m2
Atap metal sheet 10 Kg/m2
Tembok Single Hebel 120-150 kg/m2
----------------------------------------------

b. Design Load (UBC-97)

DEAD LOAD:

----------------------------------------------
Function QDL Unit
----------------------------------------------
Gudang 2500 Kg/m2
Arsip 800 Kg/m2
Roof + Peralatan M&E 500 Kg/m2
Partisi ringan 50 Kg/m2
----------------------------------------------

LIVE LOAD:

----------------------------------------------
Function QLL Unit
----------------------------------------------
Sekolah 200 Kg/m2
Perpustakaan, R. Baca 300 Kg/m2
Perpustakaan, Rak Buku 600 Kg/m2
Rumah Sakit, Kamar 200 Kg/m2
Rumah Sakit, Lab 500 Kg/m2

Page 7
4. Load Calculation

Apartemen 200 Kg/m2

Balkon, Koridor 480 Kg/m2
Anjungan 500 Kg/m2
Kamar Mandi 250 Kg/m2
Kantor 250 Kg/m2
Lab Komputer 300 Kg/m2
Ruang Server 500 Kg/m2
Retail, Supermarket 500 Kg/m2
Bioskop, Teater 250 Kg/m2
Teater, Moveable seats 500 Kg/m2
Teater, Stage,Warehouse 600 Kg/m2
Roof, Tanpa akses 100 Kg/m2
Roof, Akses 250 Kg/m2
Heavy Parking,Unloading 800 Kg/m2
Light Parking 400 Kg/m2
Garasi, bengkel 400 Kg/m2
Garasi, rumah 250 Kg/m2
Pabrik ringan 400 Kg/m2
Pabrik berat 600 Kg/m2
Gudang rumah tinggal 200 Kg/m2
Gudang ringan 600 Kg/m2
Gudang berat 1200 Kg/m2
Jembatan penyebrangan 500 Kg/m2
Jalan mobil 1200 Kg/m2
Plantation 1600 kg/m3
Water pool 1000 kg/m3
Beban Lift Kecil 2500 kg/titik
Beban Lift Sedang 3500 kg/titik
----------------------------------------------

c. Live Load Reduction Factor

(Faktor Reduksi Beban Hidup)

Untuk Pelat = 1.0

Untuk Balok Anak = 1.0
Untuk Kolom praktis = 1.0
Untuk Balok Induk = Tergantung luas tributary area
Untuk Kolom Induk = Tergantung luas tributary area

-------------------------------------------------
Ruangan Pelat,B.Anak Portal,B.Induk Massa
-------------------------------------------------
Perkantoran 1.0 0.9 0.25 (min 50 kg/m2)
Apartment 1.0 0.9 0.25 (min 50 kg/m2)
Parkir (Public) 1.0 0.9 0.0
Parkir (Private) 1.0 0.9 0.5
Gudang 1.0 1.0 0.8
Perpustakaan 1.0 1.0 0.8
Machinery 1.0 1.0 1.0
Roof Garden 1.0 1.0 1.0

Page 8
4. Load Calculation

Landscape 1.0 1.0 1.0

-------------------------------------------------

d. Faktor Reduksi Beban Hidup terhadap Jumlah Lantai

yang dipikul

Jumlah lantai yang dipikul = 1 Story : 1.0

Jumlah lantai yang dipikul >= 2 Story : 0.80

Dibandingkan dengan Faktor reduksi untuk Aksial

Kolom sesuai SNI-1727 dan diambil yang terbesar.

Page 9
6. Earthquake Load
Static Equivalent/Dynamic Analysis Data

Earthquake Load

Page 10
Earthquake Map from SNI-1726-2011
Equal Risk Map, Ss Values

Earthquake Load
Equal Risk Map, S1 Values

Page 11
7. Structural Modeling

Computer Program : SANSPRO VER. 5.10 + Drawing Module

Description : Integrated Structural Analysis and Design System for
Building and General Structures
Building Model : Single and Multiple Diapraghms
Structural Model : 2D and 3D Space Frame and Shearwall
Rigid Floor Model : Yes
Rigid End Offset : Yes
Effective Cracked Inertia : Yes

Truss Element : 2-node Isoparametric Truss Element

Frame Element : 2-node Hermitian 3D Frame Element

Plane Stress Element : 9-node Quadrilateral Isoparametric Plane Stress Element

3/4-node Isoparametric Plane Stress Element
3/4-node Assumed Deviatoric Stress Plane Stress
Element
Plate Bending Element : 9-node Quadrilateral Isoparametric Plate Bending
Element
3/4-node Discrete Kirchoff Plate Bending Element
4-node Hybrid Formulation Plate Bending Element
3/4-node Assumed Deviatoric Stress Plate Bending
Element
Shear Wall Element : 3/4-node Discrete Kirchoff + Drilling DOF Shell Element
4-node Hybrid Formulation + Drilling DOF Shell
Element
3/4-node Assumed Deviatoric + Drilling DOF Shell
Element

Static Condensation : Yes (to get a 3-DOF/Floor Model)

Linear Equation Solver : Variable Column Cholesky Method

Eigen Value Solver : Subspace Iteration with Lanczos Starting Vector
Direct Integration Solver : Modified Newmark Method, Wilson-Theta Method,
Hilber-Alpha Method

Analysis Method : Linear Static Analysis

Linear Eigen Value Analysis
Linear Dynamic Spectrum Response Analysis

Advanced Analysis Method : For Impact/Harmonic/Time History Load only

Linear Dynamic Direct Integration
Nonlinear Static Analysis

Foundation Design : Capacity Foundation Design for Pile and Bored Pile
Component Design : Concrete Capacity Design for Beam, Column, Shearwall
Drawing Generator : Automatic Drawing Generator for Concrete Structures

Page 12
8. Structural Layout
Beam and Column Layout for Floor No. 1

Structural Layout
Floor Slab for Floor No. 1

Page 13
8. Structural Layout
Beam and Column Layout for Floor No. 2

Structural Layout
Floor Slab for Floor No. 2

Page 14
8. Structural Layout
Beam and Column Layout for Floor No. 3

Structural Layout
Floor Slab for Floor No. 3

Page 15
11. Support Reactions

Control Parameters:

Load Combination : Using Automatic (Computer generated) Load Combinations

Load Factor : Yes (Factored Output)
Ductility, Rx : 8.00
Ductility, Rz : 8.00
EQ Load Multiplier : NO (OmgX = 1.0, OmgZ = 1.0)
Use LLRF1 : NO (LLRF1 = 1.0, No Axial Reduction for Story Effects)
Use LLRF2 : NO (LLRF2 = 1.0, No Live Load Reduction for Earthquake)
Use Vertical Earthquake, Av = 0.12

Support Reactions: (kg)

Page 16
12. Nodal Displacements
Nodal Displacements DY for Floor No. 0

Nodal Displacements
Nodal Displacements DY for Floor No. 1

Page 17
12. Nodal Displacements
Nodal Displacements DY for Floor No. 2

Nodal Displacements
Nodal Displacements DY for Floor No. 3

Page 18
13. Moment Diagrams
Beam Moment Diagram for Floor No. 1

Beam Shear Diagram for Floor No. 1

Page 19
13. Moment Diagrams
Beam Moment Diagram for Floor No. 2

Beam Shear Diagram for Floor No. 2

Page 20
13. Moment Diagrams
Beam Moment Diagram for Floor No. 3

Beam Shear Diagram for Floor No. 3

Page 21
15. Element Design Results
Beam Rebar Design for Floor No. 1

Column Rebar Design for Floor No. 1

Page 22
15. Element Design Results
Beam Rebar Design for Floor No. 2

Column Rebar Design for Floor No. 2

Page 23
15. Element Design Results
Beam Rebar Design for Floor No. 3

Column Rebar Design for Floor No. 3

Page 24
ATTACHMENTS

1. Building Design Results (*.BTR)

2. Capacity Design Results (*.C0?)
3. Foundation and Pilecap Design Calculation (*.FND)
4. Soil Investigation Report
5. Special Material and Load Data

Page 25
ATTACHMENT 01: Building Text Report (*.BTR)

SANSPRO for Windows V.5.10

Building Text Report
Version 1.1, 07 Mar 2002
Last Update: 1 Jan 2017
(C) Nathan Madutujuh, ESRC

PROJECT DATA:
Project : RUMAH 2 LANTAI
Location : RUMAH TINGGAL
Building : KEL. MANUAMAN-KEC. ATAMBUA SELATAN
File : D:\CAD\PA JUANDA.MDL
Date : 23 03 2021
Licensee : Civil Engineering Student (DOF < 500)

STRUCTURAL DATA:
Structure Model = 9 : Building1
Structure Material = 1 : Concrete
Structure Type = 0 : DuctileFrame
Design Method = 2 : Capacity
Design Code = 14 : PBI-2013
Steel Design Option = 1 : Linear
Importance Factor I = 1

UNIT SYSTEM:
Unit Type = 0
Unit Name = Modeler
Modulus = kg/cm2
Unit Weight = kg/cm3
Length = cm
Displacement = cm
Force = kg
Moment = kg.cm
Torsion = kg.cm
Stress = kg/cm2
Gravity Accel = cm/s2

ANALYSIS OPTION:
Analysis Method = 1 : Static
Linearity Model = 1 : Linear Static
Rigid Floor Option = 1
Gravity Acceleration = 981.00000
Condensation Level = 2
P-Delta Effects =0
P-Delta Ductility Factor = 1.000
#1 Lateral Load Case with Pdelta = 0
#2 Lateral Load Case with Pdelta = 0
Include Slab Thickness for Beam Weight = 0
Use Effective Concrete Inertia = TRUE
Effective Inertia of Concrete Beam, Slab (Percent) = 50.000 25.000
Effective Inertia of Concrete Column (Percent) = 70.000
Effective Inertia of Concrete Shrwal (Percent) = 70.000 35.000
Effective Inertia of Steel Beam, Slab (Percent) = 80.000
Effective Inertia of Steel Column (Percent) = 80.000
Effective Area of Steel Truss (Percent) = 80.000
Use Rigid End Zone for Beam = 0
Stiffness Option for Plane Stress/Strain = 0
Shell FEM Formulation Method = 3

EARTHQUAKE LOAD DATA:

Earthquake Dir Comb = 3
Total Earthquake Dir = 0
Use Base Shear Correction = 0
Number of Floor Included NF = 3
Earthquake Design Code = 5
Earthquake Z-Factor, Z = 1
Earthquake Structure Type = 2
Time Period Calculation Method = 1
Basic Time Period, Tox = 0.2789
Basic Time Period, Toz = 0.2789
Total Structure Weight, Wgt = 71408.72
Earthquake Max Height Ht = 730
Earthquake Base Level H-base = 0
Structural Width, X-Dir Wx = 7
Structural Width, Z-Dir Wz = 10.3
Earthquake Design Coeff., Cdx = 0.075
Earthquake Design Coeff., Cdz = 0.075
Design Base Shear, Vdx = 5355.654
Design Cofficient, Vdz = 5355.654
Updated Time Period (Drift),Tdx = 0

Page 26
ATTACHMENT 01: Building Text Report (*.BTR)

Updated Time Period (Drift),Tdz = 0

Earthquake Static Equivalent Load

----------------------------------------------------------
Floor Fsx Fsz Fdx Fdz
----------------------------------------------------------
1 671.8368 671.8368 0.0000 0.0000
2 3866.7666 3866.7666 0.0000 0.0000
3 817.0506 817.0506 0.0000 0.0000
----------------------------------------------------------

Maximum Output and Design Values are taken from All Load Combinations:
Comb Self WgtDead LoadLive Load Earthq-X
1 1.200 1.200 1.600 0.000
2 1.344 1.344 1.000 1.300
3 1.344 1.344 1.000 1.300
4 1.344 1.344 1.000 -1.300
5 1.344 1.344 1.000 -1.300
6 1.344 1.344 1.000 0.390
7 1.344 1.344 1.000 -0.390
8 1.344 1.344 1.000 0.390
9 1.344 1.344 1.000 -0.390

FLOOR NO. 0 (N,V x 1000; M,Tor x 100000 OR 1.0E+05)

-----------------------------------------------------------------------------------
Beam Elements (Steel: frl,frm,frr,frv,frmx Concrete: nl/nl nm/nm nr/nr sl sr dcr)
Flr Idx s Len Vl Vr Ml Mm Mr Na Tr
-----------------------------------------------------------------------------------

FLOOR NO. 1 (N,V x 1000; M,Tor x 100000 OR 1.0E+05)

-----------------------------------------------------------------------------------
Beam Elements (Steel: frl,frm,frr,frv,frmx Concrete: nl/nl nm/nm nr/nr sl sr dcr)
Flr Idx s Len Vl Vr Ml Mm Mr Na Tr
-----------------------------------------------------------------------------------
1 1 12 160.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 2 12 150.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 3 12 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 4 12 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 5 12 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 6 12 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 7 12 160.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 8 12 150.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 9 12 100.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 10 12 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 11 12 50.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 12 12 160.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 13 12 150.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 14 12 100.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 15 12 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 16 12 50.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 17 12 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 18 12 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 19 12 160.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 20 12 150.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 21 12 100.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 22 12 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 23 12 50.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 24 12 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 25 12 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 26 9 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
1 27 9 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
1 28 12 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
1 29 12 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
-----------------------------------------------------------------------------------
Range: Mmax=0.000, Vmax=0.000, Trmax=0.000, Nmin=0.000, Nmax=0.000

-----------------------------------------------------------------------------------
Column Elements (Steel: frl,frm,frr,frv,frmx Concrete: nbt,nbf,spc,ro,dcrx,dcry)
Flr Idx s Len Na Vx Vy Mx My
-----------------------------------------------------------------------------------
1 1 43 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 5.0 2.65 0.00
1 2 43 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 5.0 2.65 0.00
1 3 43 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 5.0 2.65 0.00
1 4 43 150.0 0.000 0.000 0.000 0.000 0.000 | 16 0 5.0 5.31 0.00
1 5 43 150.0 0.000 0.000 0.000 0.000 0.000 | 12 0 5.0 3.98 0.00
1 6 45 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 7.5 1.18 0.00

Page 27
ATTACHMENT 01: Building Text Report (*.BTR)

1 7 45 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 7.5 1.18 0.00

1 8 36 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 3.8 2.09 0.00
1 9 44 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
1 10 44 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
1 11 44 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
1 12 44 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
1 13 44 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
1 14 44 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
1 15 44 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
1 16 44 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
1 17 35 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 3.8 2.79 0.00
1 18 35 150.0 0.000 0.000 0.000 0.000 0.000 | 8 0 3.8 2.79 0.00
1 19 35 150.0 0.000 0.000 0.000 0.000 0.000 | 4 0 3.8 1.40 0.00
-----------------------------------------------------------------------------------
Range: Nmin=0.000, Nmax=0.000, Mmax=0.000, Vmax=0.000, Trmax=0.000

FLOOR NO. 2 (N,V x 1000; M,Tor x 100000 OR 1.0E+05)

-----------------------------------------------------------------------------------
Beam Elements (Steel: frl,frm,frr,frv,frmx Concrete: nl/nl nm/nm nr/nr sl sr dcr)
Flr Idx s Len Vl Vr Ml Mm Mr Na Tr
-----------------------------------------------------------------------------------
2 1 11 160.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 2 11 150.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 3 11 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 4 11 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 5 11 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 6 11 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 7 11 160.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 8 11 150.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 9 11 100.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 10 11 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 11 11 50.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 12 11 160.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 13 11 150.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 14 11 100.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 3/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 15 11 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 16 11 50.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 17 11 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 18 11 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 19 11 160.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 20 11 150.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 21 11 100.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 22 11 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 23 11 50.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 24 11 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 25 11 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 26 9 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
2 27 9 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
2 28 11 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
2 29 11 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 6.5 6.5 0.00
-----------------------------------------------------------------------------------
Range: Mmax=0.000, Vmax=0.000, Trmax=0.000, Nmin=0.000, Nmax=0.000

-----------------------------------------------------------------------------------
Column Elements (Steel: frl,frm,frr,frv,frmx Concrete: nbt,nbf,spc,ro,dcrx,dcry)
Flr Idx s Len Na Vx Vy Mx My
-----------------------------------------------------------------------------------
2 1 43 280.0 0.000 0.000 0.000 0.000 0.000 | 4 0 5.0 1.33 0.00
2 2 43 280.0 0.000 0.000 0.000 0.000 0.000 | 4 0 5.0 1.33 0.00
2 3 43 280.0 0.000 0.000 0.000 0.000 0.000 | 12 0 5.0 3.98 0.00
2 4 43 280.0 0.000 0.000 0.000 0.000 0.000 | 12 0 5.0 3.98 0.00
2 5 43 280.0 0.000 0.000 0.000 0.000 0.000 | 4 0 5.0 1.33 0.00
2 6 45 280.0 0.000 0.000 0.000 0.000 0.000 | 8 0 7.5 1.18 0.00
2 7 45 280.0 0.000 0.000 0.000 0.000 0.000 | 8 0 7.5 1.18 0.00
2 8 36 280.0 0.000 0.000 0.000 0.000 0.000 | 8 0 3.8 2.09 0.00
2 9 36 280.0 0.000 0.000 0.000 0.000 0.000 | 8 0 3.8 2.09 0.00
2 10 44 280.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
2 11 44 280.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
2 12 44 280.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
2 13 44 280.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
2 14 44 280.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
2 15 44 280.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
2 16 44 280.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
2 17 35 280.0 0.000 0.000 0.000 0.000 0.000 | 4 0 3.8 1.40 0.00
2 18 35 280.0 0.000 0.000 0.000 0.000 0.000 | 4 0 3.8 1.40 0.00
-----------------------------------------------------------------------------------
Range: Nmin=0.000, Nmax=0.000, Mmax=0.000, Vmax=0.000, Trmax=0.000

Page 28
ATTACHMENT 01: Building Text Report (*.BTR)

FLOOR NO. 3 (N,V x 1000; M,Tor x 100000 OR 1.0E+05)

-----------------------------------------------------------------------------------
Beam Elements (Steel: frl,frm,frr,frv,frmx Concrete: nl/nl nm/nm nr/nr sl sr dcr)
Flr Idx s Len Vl Vr Ml Mm Mr Na Tr
-----------------------------------------------------------------------------------
3 1 9 160.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 2 9 150.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 3 9 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 4 9 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 5 9 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 6 9 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 7 9 160.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 8 9 150.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 9 9 100.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 10 9 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 11 9 50.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 12 9 160.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 13 9 150.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 14 9 100.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 15 9 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 16 9 50.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 17 9 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 18 9 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 19 9 160.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 20 9 150.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 21 9 100.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 22 9 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 23 9 50.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 24 9 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 25 9 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 26 9 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 27 9 215.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 28 9 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
3 29 9 300.0 0.000 0.000 0.000 0.000 0.000 0.000 0.000 | 2/ 2 2/ 2 2/ 2 4.1 4.1 0.00
-----------------------------------------------------------------------------------
Range: Mmax=0.000, Vmax=0.000, Trmax=0.000, Nmin=0.000, Nmax=0.000

-----------------------------------------------------------------------------------
Column Elements (Steel: frl,frm,frr,frv,frmx Concrete: nbt,nbf,spc,ro,dcrx,dcry)
Flr Idx s Len Na Vx Vy Mx My
-----------------------------------------------------------------------------------
3 1 43 300.0 0.000 0.000 0.000 0.000 0.000 | 4 0 5.0 1.33 0.00
3 2 43 300.0 0.000 0.000 0.000 0.000 0.000 | 4 0 5.0 1.33 0.00
3 3 43 300.0 0.000 0.000 0.000 0.000 0.000 | 4 0 5.0 1.33 0.00
3 4 43 300.0 0.000 0.000 0.000 0.000 0.000 | 8 0 5.0 2.65 0.00
3 5 43 300.0 0.000 0.000 0.000 0.000 0.000 | 4 0 5.0 1.33 0.00
3 6 45 300.0 0.000 0.000 0.000 0.000 0.000 | 8 0 7.5 1.18 0.00
3 7 45 300.0 0.000 0.000 0.000 0.000 0.000 | 8 0 7.5 1.18 0.00
3 8 36 300.0 0.000 0.000 0.000 0.000 0.000 | 8 0 3.8 2.09 0.00
3 9 36 300.0 0.000 0.000 0.000 0.000 0.000 | 8 0 3.8 2.09 0.00
3 10 44 300.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
3 11 44 300.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
3 12 44 300.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
3 13 44 300.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
3 14 44 300.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
3 15 44 300.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
3 16 44 300.0 0.000 0.000 0.000 0.000 0.000 | 8 0 6.3 1.70 0.00
3 17 35 300.0 0.000 0.000 0.000 0.000 0.000 | 4 0 3.8 1.40 0.00
3 18 35 300.0 0.000 0.000 0.000 0.000 0.000 | 4 0 3.8 1.40 0.00
-----------------------------------------------------------------------------------
Range: Nmin=0.000, Nmax=0.000, Mmax=0.000, Vmax=0.000, Trmax=0.000

Page 29
ATTACHMENT 02: Beam Capacity Design (*.C01)

SANSPRO V.5.10 - Steel Capacity Design

Design Code : ACI-89, PBI-91, ACI-2002, PBI-2003, PBI-2012, PBBI-2013
Unit system : kg.cm, lbs.in, N.cm
(C) Nathan Madutujuh, 1992-2017
Engineering Software Research Center
Revised for Material Schedule, 2017

LICENSEE : Civil Engineering Student (DOF < 500)

Design Code : PBI-2003, ACI-2002 (Using 1.25 fy and 1.4 fps)
Unit System : kg,cm, kg.cm

Project : RUMAH 2 LANTAI

Notes : RUMAH TINGGAL

BEAM REINFORCEMENT BAR (CODE 222 = SHEAR NOT OK)

-------------------------------------------------------------------------------------------------
Flr Beam Id | L | Left | Mid | Right | Bar | Bw / Ht | s-lft s-rgt Bar | Atl Atr
-------------------------------------------------------------------------------------------------
1 1 56 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 2 57 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 3 58 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 4 59 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 5 60 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 6 61 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 7 62 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 8 63 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 9 64 | 100.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.1 0.1
1 10 65 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 11 66 | 50.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.1 0.1
1 12 67 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 13 68 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 14 69 | 100.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 15 70 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 16 71 | 50.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 17 72 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 18 73 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 19 74 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 20 75 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 21 76 | 100.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 22 77 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 23 78 | 50.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 24 79 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 25 80 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 26 81 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
1 27 82 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
1 28 83 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
1 29 84 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 20/ 30 | 6.5 6.5 d10 | 0.0 0.0
2 1 85 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.0
2 2 86 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.0
2 3 87 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.1 0.1
2 4 88 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.1 0.2
2 5 89 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.0
2 6 90 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.0
2 7 91 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.1 0.2
2 8 92 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.2 0.3
2 9 93 | 100.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.4 0.5
2 10 94 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.1 0.0
2 11 95 | 50.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.2
2 12 96 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.2 0.4
2 13 97 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.1
2 14 98 | 100.0 | 3/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.0
2 15 99 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.0
2 16 100 | 50.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.0
2 17 101 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.7 1.1
2 18 102 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.4 0.7
2 19 103 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.3 0.4
2 20 104 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.8 0.0
2 21 105 | 100.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 1.1 1.5
2 22 106 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.0
2 23 107 | 50.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.0
2 24 108 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.0
2 25 109 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.0
2 26 110 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.5 0.8
2 27 111 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
2 28 112 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.0 0.0
2 29 113 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d13 | 15/ 30 | 6.5 6.5 d10 | 0.2 0.4
3 1 114 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 2 115 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0

Page 30
ATTACHMENT 02: Beam Capacity Design (*.C01)

3 3 116 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0

3 4 117 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 5 118 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 6 119 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 7 120 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 8 121 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 9 122 | 100.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 10 123 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 11 124 | 50.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 12 125 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 13 126 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 14 127 | 100.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 15 128 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 16 129 | 50.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 17 130 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 18 131 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 19 132 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 20 133 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 21 134 | 100.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 22 135 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 23 136 | 50.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 24 137 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 25 138 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 26 139 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 27 140 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 28 141 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 29 142 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
------------------------------------------------------------------------------------------------

Page 31
ATTACHMENT 02: Beam Capacity Design (*.C01)

3 3 116 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0

3 4 117 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 5 118 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 6 119 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 7 120 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 8 121 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 9 122 | 100.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 10 123 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 11 124 | 50.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 12 125 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 13 126 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 14 127 | 100.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 15 128 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 16 129 | 50.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 17 130 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 18 131 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 19 132 | 160.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 20 133 | 150.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 21 134 | 100.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 22 135 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 23 136 | 50.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 24 137 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 25 138 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 26 139 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 27 140 | 215.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 28 141 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
3 29 142 | 300.0 | 2/ 2 | 2/ 2 | 2/ 2 | d10 | 15/ 20 | 4.1 4.1 d10 | 0.0 0.0
------------------------------------------------------------------------------------------------

Page 32