Scribd
Upload
102 views3 pages

B Technical Deft: Metallizing Aluminum and Zinc Protection of Iron and Steel

The document provides recommended practices for metallizing iron and steel with aluminum and zinc for corrosion protection. It describes surface preparation through abrasive blasting, applying zinc or aluminum coatings, optional additional protective measures, and inspection guidelines. It also lists typical coatings for various corrosion exposure conditions.

Uploaded by

Razvan Gavrila
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
102 views3 pages

B Technical Deft: Metallizing Aluminum and Zinc Protection of Iron and Steel

The document provides recommended practices for metallizing iron and steel with aluminum and zinc for corrosion protection. It describes surface preparation through abrasive blasting, applying zinc or aluminum coatings, optional additional protective measures, and inspection guidelines. It also lists typical coatings for various corrosion exposure conditions.

Uploaded by

Razvan Gavrila
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

AWS C2.

2-67

b TECHNICAL DEFT

Recommended
Practices
for

Metallizing
with

Aluminum and Zinc


for

Protection
of
Iron and Steel

AMERICAN WELDING SOCIETY


AWS C2.2-67

Recommended
Practices
for

Metallizing
with Aluminum and Zinc
for Protection of Iron and Steel
Prepared by
AWS Committee on Metallizing

Under the direction of


AWS Technical Activities Committee

Edward A. Fenton
Technical Director

Price $1.00

Copyright 1967 by

A M E R I C A N W E L D I N G SOCIETY, I N C .
345 East 47th Street, New York, N. Y. 10017
Table of Contents

Section I • General
101. Scope 1
102. Definition of Terms 1
103. Equipment Requirements 1

Section II • Surface Preparation


201. General 2
202. Cleaning Prior to Blasting 2
203. Abrasives for Blasting 2
204. Blasting Procedures 4

Section III • Zinc and Aluminum Coatings


301. Material 5
302. Procedure 5

Section I V * Additional Protective Measures


401. Purpose 6
402. Seal Materials 6
403. Application 6

Section V • Inspection
501. Abrasives 7
502. Surface 7
503. Zinc or Aluminum 7
504. Sealer Coats 7

Section V I * Typical Coatings for Various Exposures


601. General 8
602. Salt, Highly Humid, Industrial Atmospheres .... 8
603. Rural Atmospheres 8
604. Tank Interiors 9
605. Ship, Boat and Barge Hulls 9
606. Steel Pilings 9
607. General 9
608. High Temperature Protection 9

ui

You might also like