Z9 Server Installation

Guide
Document Version 0.1
Aug 2018
© Copyright Bitmaintech Pte.Ltd. 2007 – 2018. All rights reserved.
Bitmaintech Pte.Ltd. (Bitmain) reserves the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any
product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that
such information is current and complete. All products are sold subject to Bitmain's terms and
conditions of sale supplied at the time of order acknowledgment.
Bitmain warrants performance of its products to the specifications applicable at the time of sale in
accordance with Bitmain's standard warranty. Testing and other quality control techniques are used to
the extent Bitmain deems necessary to support this warranty. Except where mandated by government
requirements, testing of all parameters of each product is not necessarily performed.
 Z9 Server Installation Guide

Bitmain assumes no liability for third‐party applications assistance. Customers are responsible for their
products and applications using Bitmain components. To minimize the risks associated with customer
products and applications, customers should provide adequate design and operating safeguards.
Bitmain does not warrant or represent that any license, either express or implied, is granted under any
Bitmain patent right, copyright or other Bitmain intellectual property right relating to any combination,
machine, or process in which Bitmain products or services are used. Information published by Bitmain
regarding third‐party products or services does not constitute a license from Bitmain to use such
products or services or a warranty or endorsement thereof. Use of such information may require a
license from a third party under the patents or other intellectual property of the third party, or a license
from Bitmain under the patents or other intellectual property of Bitmain.
Resale of Bitmain products or services with statements different from or beyond the parameters stated
by Bitmain for that product or service voids all express and any implied warranties for the associated
Bitmain product or service and is an unfair and deceptive business practice. Bitmain is not responsible or
liable for any such statements.
All company and brand products and service names are trademarks or registered trademarks of their
respective holders.
All text and figures included in this publication are the exclusive property of Bitmaintech Pte.Ltd.
(Bitmain), and may not be copied, reproduced, or used in any way without the express written
permission of Bitmain. Information in this document is subject to change without notice and does not
represent a commitment on the part of Bitmain. Although the information in this document has been
carefully reviewed, Bitmain does not warrant it to be free of errors or omissions. Bitmain reserves the
right to make corrections, updates, revisions or changes to the information in this document.

Bitmaintech Pte.Ltd.
Tel: +86‐400‐890‐8855
www.bitmain.com

‐2‐
 Z9 Server Installation Guide

Table of Contents

1.Overview 4
1.1 Z9 Server Components 5
1.2 Specifications 6
2.Connecting the Power Supply 7
3.Setting Up the Server 8
4.Configuring the Server 10
5. Monitoring
. Your Server 11
6.Administering Your Server 12
6.1 Checking Your Firmware Version 12
6.2 Upgrading Your System 12
6.3 Modifying Your Pass Word 13
6.4 Restoring initial Settings 13

‐3‐
 Z9 Server Installation Guide

1.Overview

1. Overview
The Z9 server is one of the products in Bitmain’s Z9 server series. All Z9 servers are tested and configured
prior to shipping to ensure easy set up.

You must provide your own ATX power supply.

‐4‐
 Z9 Server Installation Guide

1.Overview

1.1 Z9 Server Components

The Z9 server main components and controller front panel are shown in the following figure:

1.Overview

‐5‐
 Z9 Server Installation Guide

1.Overview

1.2 Specifications

Product Glance Value

Product model Z9
Hashrate, KSol/s 40.8±5%
Reference power on wall, Watt 1150W± 10%
Hardware Configuration
Quantity of hash chips 48
Quantity of hash boards 3
Networking connection mode RJ45 ethernet 10/100M
Server Size (Length*Width*Hight, w/o
226*134*277
package), mm
Net weight, kg 4.7

‐6‐
 Z9 Server Installation Guide

2. Connecting the Power Supply

2. Connecting the Power Supply

Seven PCI‐e connectors are located at the top of the Z9 server for connecting the PSU as follows:

● Six PCI‐e connectors for the hash boards. Each hash board has two PCI‐e connectors.
● One PCI‐e connector located on the controller.

Each hashboard must be powered by the same PSU to prevent possible damage and instability.

To connect the power supply:

1. Connect PSU power cable connectors to each of the two PCI‐e connectors on the top of the Z9 server,
ensuring that each hash board is powered by the same PSU.

2. Connect a PSU power cable connector to the Z9 PCI‐e connector on the controller.
3. Connect the network cable to the ETH port.
4. To power up your Z9 server, connect the PSUs to the power wall outlet.

If you are using more than one PSU,power up the PSU connected to the controller AFTER you have
Powered up the other PSU(s).

‐7‐
 Z9 Server Installation Guide

3.Setting Up the Server

3. Setting Up the Server

To set up the server:

The file IPReporter.zip is supported by Microsoft Windows only.

1. Go to the following site:

https://shop.bitmain.com/support.htm?pid=00720160906053730999PVD2K0vz0693
2. Download the following file: IPReporter.zip
3. Extract the file.

The default DHCP network protocol distributes IP addresses automatically.

4. Right‐click IPReporter.exe and run it as Administrator.

5. Select one of the following options:
■ Shelf, Step, Position – suitable for farm servers to mark the location of the servers.
■ Default – suitable for home servers.
6. Click Start.

‐8‐
 Z9 Server Installation Guide

3. Setting Up the server

7. On the controller board, click the IP Report button. Hold it down until it beeps (about 5 seconds).

The IP address will be displayed in a window on your computer screen.

8. In your web browser, enter the IP address provided.

9. Proceed to login using root for both the username and password.
10. In the Network section, you can assign a DHCP IP address (optional).
11. Click Save & Apply.

‐9‐
 Z9 Server Installation Guide

4. Configuring the Server

4. Configuring the Server

Setting Up the Pool

To configure the server:

1. click General Settings.

2. Set the options according to the following table:

Option Description

Pool URL Enter the URL of your desired pool.

The Z9 server can be set up with three mining pools, with decreasing priority
from the first pool (pool 1) to the third pool (pool 3).
The pools with low priority will only be used if all higher priority pools are
offline.

Worker Your worker ID on the selected pool.

Password The password for your selected worker.

3. Click Save & Apply to save and restart the server.

‐ 10 ‐
 Z9 Server Installation Guide

5. Monitoring Your Server

5. Monitoring Your server

To check the operating status of your server:

1. Click the status marked below.

2. monitor your server according to the descriptions in the following table:

Option Description

ASIC# Number of chips detected in the chain.

Frequency ASIC frequency setting.

GH/S(RT) Hash rate of each hash board ( GH/s)

Temp(PCB) Temperature of each hash board (°C).(Applied only to server with fixed frequency)

Temp(Chip) Temperature of the chips on each hash board (°C).

ASIC status One of the following statuses will appear:

● O ‐ indicates OK
● X ‐ indicates error
● ‐ ‐ indicates dead

‐ 11 ‐
 Z9 Server Installation Guide

6. Administering Your Server

6. Administering Your Server

6.1 Checking Your Firmware Version
To check your firmware version:

1. In System, click the Overview tab.

2. File System Version displays the date of the firmware your server use. In the example below, the server is
using firmware version 20180812.

6.2 Upgrading Your System

Make sure that the Z9 server remains powered during the upgrade process. If power fails before
the upgrade is completed, you will need to return it to Bitmain for repair.

To upgrade the server’s firmware:

1. In System, click Upgrade.

‐ 12 ‐
 Z9 Server Installation Guide

6. Administering Your Server

2. For Keep Settings:

■ Select the check box to keep your current settings (default).
■ Clear the check box to reset the server to default settings.
3. Click the (Browse) button and navigate to the upgrade file. Select the upgrade file, then click
Flash image. A message appears notifying you if the Z9 firmware can be upgraded and if yes, will then
proceed to flash the image.
4. When the upgrade is completed, the following message appears:

5. Click one of the following options:

■ Reboot ‐ to restart the server with the new firmware.
■ Go Back ‐ to continue mining with the current firmware. The server will load the new firmware next
time it is restarted.

6.3 Modifying Your Password

To change your login password:

1. In System, click the Administration tab.

2. Set your new password, then click Save & Apply.

6.4 Restoring Initial Settings

To restore your initial settings

1. Turn on the server and let it run for 5 minutes.

2. On the controller front panel, press and hold the Reset button for 10 seconds.

Resetting your server will reboot it and restore its default settings. The red LED will automatically
flash once every 15 seconds if the reset is operated successfully.

‐ 13 ‐
 Z9 Server Installation Guide

Regulation:

FCC Notice（FOR FCC CERTIFIED MODELS）:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

Note:

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense.

EU WEEE: Disposal of Waste Equipment by Users in Private Household in the European Union

This symbol on the product or on its packaging indicates that this product must not be
disposed of with your other household waste. Instead, it is your responsibility to dispose of
your waste equipment by handling it over to a designated collection point for the recycling of
waste electrical and electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more information
about where you can drop off your waste equipment for recycling, please contact your local city office, your
household waste disposal service or the shop where your purchased the product.

台湾 ROHS:

設備名稱： ，型號：
有害物质
鉛 多溴二苯
單元 汞 鎘 六價鉻 多溴聯苯
(Pb) 醚
（Hg） （Cd） (Cr+6) （PBB）
（PBDE）
外殼 ○ ○ ○ ○ ○ ○
電路板組
— ○ ○ ○ ○ ○
件
其他線材 — ○ ○ ○ ○ ○

備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比含量

基準
值。
備考 2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
備考 3.〝－〞係指該項限用物質為排除項目

‐ 14 ‐