K1280 Keyboard User's Guide: Welcome

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

K1280 Keyboard User’s Guide

Welcome

Congratulations on selecting the K1280 Bluetooth Keyboard, it’s super slim


size with 78 keys. Advanced patent on less noise and adopt

latex spring circle and scissor structure,This creative and easy-to-use

Bluetooth Keyboard will bring you the novel feeling of wireless transmitting.

Overview

CAUTION: To use this product properly,

please read the user's guide before installation.

System Requirement

IPAD or PC Compatible/Mac PC enable with Bluetooth wireless technology.


*
Windows system with Bluetooth software installed (Windows XP)
*
above, Windows vista, Toshiba stack, Widcomm BTW, or IVT Bluecoleil).
*
* Mac OS 10.2.8 or above with Bluetooth software installed.

Installation Guide
done the Bluetooth dongle installation procedure.
Step 1. Charging the battery When to charge Blue LED Blinking: Pairing or Low in Battery Green LED
1 First-Time Use: Please charge at least 6 hours for the first time usage and on: Charging
charge at least 2 hours when battery runs low 2 Blue LED Blinking: When the
2) Press the “Discovery” button on the bottom of the
blue LED starts blinking, it means the battery is nearly empty
keyboard for 2-5 seconds. The keyboard will be switched
How to charge
to the standby mode for pairing, the red light LED will
Plug the USB cable into your keyboard and computer by USB port
flash..
respectively and it starts charging. Keyboard can work uninterruptedly during
charging.
3) Next Pairing Steps
Step 2. Pairing your Bluetooth Keyboard with your computer A. Steps for matching WIDCOMM
1 ) .Double click the BTW icon in toolbar, select
Before pairing your Bluetooth Keyboard with your computer, you should read
“Bluetooth” and click "search for devices"
through the instructions that came with your Bluetooth hardware and software for
detail how to pair a device to your specific Bluetooth configuration. Follow
below steps to pair your Bluetooth Keyboard under Widcomm BTW, Microsoft
Bluetooth driver and IVT Bluecoleil

1) Before you can install your Bluetooth Keyboard, please make sure you

Downloaded from www.Manualslib.com manuals search engine


2). Select "My device is set up and ready to be found", when
find the Bluetooth Keyboard, you can select it and click "next"

3). Select "Don't use passkey", and click next",


operating system will finish the installation of the
new facility automatically.

B. Steps for matching on Microsoft built-in


software
1). Click Start menu, click Control
Panel and double click “Bluetooth
Devices”., On the “Devices” tab,
click “Add”.

Downloaded from www.Manualslib.com manuals search engine


2). Select the found bluetooth keyboard device, press
the right button andselect "Refresh Services" .
C.Steps for matching on IVT Bluecoleil
3). Then select the Bluetooth Keyboard icon, press
1) .Make sure the bluetooth function have been
right button to select “Connect” and click
activated on the computer system, double click “Bluetooth Human Interface Device Service”,On
the bluetooth icon in toolbar, then click Bluetooth Keyboard type the stochastic match code
"Bluetooth Device Discovery" under "My and press the Enter key.
Bluetooth" in toolbar.

Product Specifications

Bluetooth Specification: Version 3.0


*
Range of 2.4GHz Spectrum
* Frequency:
Operating Voltage: 2.1 ~3.2Vdc ( powered by AAA
* batteries )
Operation Current: < 5mA
*
Standby Current: 1.2mA
*
Sleep Current: < 0.2 mA
*
Transmit Range: up to 10 meters
*
Storage -40 ~ +125 degree
* Temperature:
* Dimensions: 300mm(L)x152mm(W)x10.8mm(H)

* Weight: 260.5g+/-2g

Federal Communication Commission Interference Statement


This device complies with Part 15 of the FCC Rules. Operation is subject to the Following two conditions:
1 This device may not cause harmful interference.
2 This device must accept any interference received., including interference

that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.

Dispose of batteries according to local regulations. Do not dispose as household waste

Troubleshooting
If you are unable to connect your Bluetooth Keyboard to the computer, or the keyboard work unconventionally, please try the following:

* Before you install your Bluetooth Keyboard, please make sure you have done the Bluetooth Dongle installation procedure, and Bluetooth facility is turned on.
* Ensure Bluetooth Keyboard has been paired to PC completely. (The system may require pairing again after restart PC If use low battery to pair )
* Ensure the Bluetooth Keyboard is within a 10 meters range of your PC
* Ensure your bluetooth device of PC have not be changed.(you have to re-connect if changed)
* If your PC bluetooth facility is connected to other bluetooth device, please kindly confirm that the speed of the Bluetooth facility is enough.

Downloaded from www.Manualslib.com manuals search engine

You might also like