Product Information PI

TOSHIBA X-RAY TUBE

D-058 D-058R
D-058S D-058SR
D-058SB D-058SBR

Stationary Anode X-ray Tube

 Especially designed for dental radiography

unit.
 Provided with an insulation cylinder
(D-058S/D-058SR) and lead cylinder
(D-058SB/D-058SBR).
 These tubes have focus 0.5, and are
available for maximum tube voltage 70 kV.
 Installed in the same enclosure with the high
voltage transformer.

General Data

Electrical:
Circuit:
High Voltage Generator .............................................. Constant Potential High-Voltage Generator
Grounding .......................................................................................................... Center-Grounded
Nominal X-ray Tube Voltage ..................................................................................................... 70 kV
Nominal Focal Spot Value ............................................................................................................ 0.5
Nominal Anode Input Power (at 1.0s):
D-058 / D-058S / D-058SB ................................................................................................... 635 W
D-058R / D-058SR / D-058SBR ........................................................................................... 675 W
(See Rating Chart)
Exposure Duty Cycle ..................................................................................................... 1:30 or more
(Exposure Time : Interval Time)
Mechanical:
Dimensions:
Overall Length ......................................................................................... See dimensional outline
Maximum Diameter ................................................................................. See dimensional outline
Target:
Anode Angle ............................................................................................................ 12.5 degrees
Material .......................................................................................................................... Tungsten
Inherent Filtration .................................................................................................. At least 1.0 mm Al
X-ray Coverage ........................................................................................... φ80 mm at SID 200 mm

★The information contained herein is presented only as a guide for the applications of our products.
No Responsibility is assumed by TOSHIBA ELECTRON TUBES & DEVICES CO.,LTD.(TETD) for any infringements of patents or other rights of the
third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TETD or others.
★The information contained herein may be changed without prior notice. It is therefore advisable to contact TETD before proceeding with the design of
equipment incorporating this product.
D-058 / D-058R / D-058S / D-058SR / D-058SB / D-058SBR

Weight:
D-058 ...................................................................................................................... Approx. 105 g
D-058S .................................................................................................................... Approx. 145 g
D-058SB ................................................................................................................. Approx. 265 g
D-058R .................................................................................................................... Approx. 165 g
D-058SR ................................................................................................................. Approx. 205 g
D-058SBR ............................................................................................................... Approx. 325 g
Cooling Method .............................................. Oil immersed (60℃ Max.) and convection oil cooling.
Tube Holding:
D-058 ......................................... Holding the glass envelope of the anode end and cathode end,
or the screw of the anode shank.
D-058R ........................................ Holding the glass envelope of the anode end and cathode end.
D-058S / D-058SR .......................................................................... Holding the insulation cylinder.
D-058SB / D-058SBR ........................................................................... Holding the lead cylinder.

Absolute Maximum and Minimum Ratings

(At any time, these values must not be exceeded.)

Maximum X-ray Tube Voltage .................................................................................................. 70 kV

Between Anode (or Cathode) and Ground ······································································35 kV
Minimum X-ray Tube Voltage ................................................................................................... 50 kV
Maximum X-ray Tube Current .................................................................................................. 13 mA
Filament Characteristics:
Maximum Filament Current ................................................................................................... 3.0 A
Filament Voltage (At maximum Filament Current 3.0A) ............................................... 2.8 ~ 3.6 V
Filament Frequency Limits ........................................................... DC or AC (Sine Wave) 0 ~ 20 kHz
Thermal Characteristics (Oil Temperature: 25℃):
Anode Heat Content:
D-058 / D-058S / D-058SB ................................................................................................. 7 kJ
D-058R / D-058SR / D-058SBR ....................................................................................... 13 kJ
Maximum Anode Heat Dissipation:
D-058 / D-058S / D-058SB .............................................................................................. 210 W
D-058R / D-058SR / D-058SBR ...................................................................................... 300 W
Maximum Radiographic Exposure Time ..................................................................................... 10 s

Environmental Limits

Operating Limits (in dielectric oil):

Oil Temperature ........................................................................................................... 10 ~ 60 ℃
Oil pressure .............................................................................................................. 70 ~ 140 kPa
Shipping and Storage Limits:
Temperature .............................................................................................................. -40 ~ 70 ℃
Humidity ........................................................................................................................ 10 ~ 90 %
（No condensation）
Atmospheric Pressure .............................................................................................. 50 ~ 106 kPa

-2-
 D-058 / D-058R / D-058S / D-058SR / D-058SB / D-058SBR

Maximum Rating Charts

(Absolute maximum rating charts)

D-058 / D-058S / D-058SB

Nominal Focal Spot Value: 0.5

50kV
13
12
60kV

10
70kV
TUBE CURRENT [mA]

0
0.1 0.2 0.3 0.5 0.7 1 2 3 5 7 10

EXPOSURE TIME [s]

D-058R / D-058SR / D-058SBR

Nominal Focal Spot Value: 0.5

50kV
13
12 60kV

10 70kV
TUBE CURRENT [mA]

0
0.1 0.2 0.3 0.5 0.7 1 2 3 5 7 10

EXPOSURE TIME [s]

-3-
D-058 / D-058R / D-058S / D-058SR / D-058SB / D-058SBR

Emission & Filament Characteristics

14 4.5
50kV
12 60kV 4

FILAMENT VOLTAGE [V]

70kV
TUBE CURRENT [mA]

10 3.5

8 3

Ef
6 2.5

4 2

2 1.5

0 1
2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 3.0

FILAMENT CURRENT [A]

Note: This graph indicates typical characteristics.

-4-
 D-058 / D-058R / D-058S / D-058SR / D-058SB / D-058SBR

Anode Heating / Cooling Curve

D-058 / D-058S / D-058SB

7
210W 170W
6
130W
HEAT STORAGE [kJ]

2
COOLING

1
HEATING
0
0 1 2 3 4
TIME [min]

D-058R / D-058SR / D-058SBR

14
300W
COOLING
12
HEAT STORAGE [kJ]

10
200W

6
100W

HEATING
0
0 1 2 3 4 5

TIME [min]

-5-
D-058 / D-058R / D-058S / D-058SR / D-058SB / D-058SBR

Dimensional Outline of D-058

Unit: mm

Ｍ５　ｄｅｅｐ１２ φ１２

Ｍ３

１２
（８）

４０±２
．５
°
６９±５

ＣＥＮＴＲＡＬ　Ｘ－ＲＡＹ

Ｆｏｃａｌ　Ｓｐｏｔ

φ３１ｍａｘ．
８ｍａｘ．
１００ｍｉｎ．

ＣＥＮＴＲＡＬ　Ｘ－ＲＡＹ

φ１３

Ｋ Ｆ
Ｆ： Ｆｉｌａｍｅｎｔ （Ｙｅｌｌｏｗ）
Ｋ： Ｃａｔｈｏｄｅ （Ｂｌａｃｋ）

-6-
 D-058 / D-058R / D-058S / D-058SR / D-058SB / D-058SBR

Dimensional Outline of D-058S

Unit: mm

Ｍ５　ｄｅｅｐ１２ φ３８
φ１２
（５） Ｍ３
Ｉｎｓｕｌａｔｉｏｎ　Ｃｙｌｉｎｄｅｒ

１２

４０±２
．５
°
７５

７０

ＣＥＮＴＲＡＬ　Ｘ－ＲＡＹ

φ１４

Ｆｏｃａｌ　Ｓｐｏｔ
４ｍａｘ．
９５ｍｉｎ．

ＣＥＮＴＲＡＬ　Ｘ－ＲＡＹ

φ１３

Ｋ Ｆ
Ｆ： Ｆｉｌａｍｅｎｔ （Ｙｅｌｌｏｗ）
Ｋ： Ｃａｔｈｏｄｅ （Ｂｌａｃｋ）

-7-
D-058 / D-058R / D-058S / D-058SR / D-058SB / D-058SBR

Dimensional Outline of D-058SB

Unit: mm

φ４２
Ｍ５　ｄｅｅｐ１２ φ３８
（５）
φ１２ Ｍ３

Ｉｎｓｕｌａｔｉｏｎ　Ｃｙｌｉｎｄｅｒ

１２

４０±２
．５
°
２９
７５

７０

ＣＥＮＴＲＡＬ　Ｘ－ＲＡＹ
２９

φ１４

φ１５

Ｆｏｃａｌ　Ｓｐｏｔ
Ｌｅａｄ　Ｃｙｌｉｎｄｅｒ
４ｍａｘ．
９５ｍｉｎ．

ＣＥＮＴＲＡＬ　Ｘ－ＲＡＹ

φ１３

Ｋ Ｆ
Ｆ： Ｆｉｌａｍｅｎｔ （Ｙｅｌｌｏｗ）
Ｋ： Ｃａｔｈｏｄｅ （Ｂｌａｃｋ）

-8-
 D-058 / D-058R / D-058S / D-058SR / D-058SB / D-058SBR

Dimensional Outline of D-058R

Unit: mm

Ｍ５　ｄｅｅｐ６
φ３０

５
１３

５３±２
１２
（ ８）

．５
８２±５

°
ＣＥＮＴＲＡＬ　Ｘ－ＲＡＹ

Ｆｏｃａｌ　Ｓｐｏｔ

φ３１ｍａｘ．
８ｍａｘ．
１００ｍｉｎ．

ＣＥＮＴＲＡＬ　Ｘ－ＲＡＹ

φ１３

Ｋ Ｆ
Ｆ： Ｆｉｌａｍｅｎｔ （Ｙｅｌｌｏｗ）
Ｋ： Ｃａｔｈｏｄｅ （Ｂｌａｃｋ）

-9-
D-058 / D-058R / D-058S / D-058SR / D-058SB / D-058SBR

Dimensional Outline of D-058SR

Unit: mm

Ｍ５　Ｄｅｅｐ　６
φ３８
φ３０
Ｉｎｓｕｌａｔｉｏｎ　Ｃｙｌｉｎｄｅｒ

５
１３

（５）

５３±２
１２
．５
°
８８

７０

ＣＥＮＴＲＡＬ　Ｘ－ＲＡＹ

φ１４

Ｆｏｃａｌ　Ｓｐｏｔ
４ｍａｘ．
９５ｍｉｎ．

ＣＥＮＴＲＡＬ　Ｘ－ＲＡＹ

φ１３

Ｋ Ｆ
Ｆ： Ｆｉｌａｍｅｎｔ （Ｙｅｌｌｏｗ）
Ｋ： Ｃａｔｈｏｄｅ （Ｂｌａｃｋ）

- 10 -
 D-058 / D-058R / D-058S / D-058SR / D-058SB / D-058SBR

Dimensional Outline of D-058SBR

Unit: mm

φ４２
φ３８ Ｍ５　ｄｅｅｐ６
φ３０

５
１３ Ｉｎｓｕｌａｔｉｏｎ　Ｃｙｌｉｎｄｅｒ
（５）

５３±２
１２
．５
°
２９
８８

７０

ＣＥＮＴＲＡＬ　Ｘ－ＲＡＹ
２９

φ１４

φ１５
Ｆｏｃａｌ　Ｓｐｏｔ

Ｌｅａｄ　Ｃｙｌｉｎｄｅｒ
４ｍａｘ．
９５ｍｉｎ．

ＣＥＮＴＲＡＬ　Ｘ－ＲＡＹ

φ１３

Ｋ Ｆ
Ｆ： Ｆｉｌａｍｅｎｔ （Ｙｅｌｌｏｗ）
Ｋ： Ｃａｔｈｏｄｅ （Ｂｌａｃｋ）

- 11 -
D-058 / D-058R / D-058S / D-058SR / D-058SB / D-058SBR

OVERSEAS SUBSIDIARIES AND AFFILIATES

EU REPRESENTATIVE
・TOSHIBA ELECTRONICS EUROPE GMBH
HANSAALLEE 181 40549 DÜSSELDORF, GERMANY
PHONE +49 (211) 5296-107 FAX +49 (211) 5296-402

For Sales & Technical Services, please contact the following representative:

・TOSHIBA ELECTRONICS EUROPE GMBH

HANSAALLEE 181 40549 DÜSSELDORF, GERMANY
PHONE +49 (211) 5296-107 FAX +49 (211) 5296-402

・TOSHIBA AMERICA ELECTRONIC COMPONENTS, INC.

2150 EAST LAKE COOK ROAD, SUITE 310
BUFFALO GROVE, ILLINOIS 60089 USA
PHONE +1 (847) 484-2400 FAX +1 (847) 541-7287

・TOSHIBA ELECTRON DEVICES & MATERIALS (SHANGHAI) CO., LTD. (TEMS)

RM1606, SH-PLAZA,
No.336, XIZANG ROAD (MIDDLE), SHANGHAI, 200001, CHINA
PHONE +86 (21) 6361-0077 FAX +86 (21) 6351-5760

(Product Development Engineering Department)

1385 SHIMOISHIGAMI, OTAWARA-SHI, TOCHIGI-KEN, 324-8550, JAPAN
PHONE: +81-287-26-6666 FAX: +81-287-26-6060
http://www.toshiba-tetd.co.jp/

･Toshiba Electron Tubes & Devices Co., Ltd. meets the Environmental Management System Standard, ISO14001.
･Toshiba Electron Tubes & Devices Co., Ltd. meets internationally recognized Standards for Quality Management System ISO9001, ISO13485.