Product Information PI
ROTANODE™
E7846
Rotating Anode X-ray Tube
Rotating anode X-ray tube for the purpose of
general diagnostic X-ray procedures.
Specially processed Rhenium-tungsten faced
molybdenum target of 58 mm diameter.
This tube has foci 1.3 and 0.6, and is available
for a maximum tube voltage 130 kV.
General Data
Application ................................................................................................ General Radiography
Electrical:
Circuit:
High Voltage Generator ............................................ Constant Potential High-Voltage Generator
Grounding ......................................................................................................... Center-Grounded
Nominal X-ray Tube Voltage (IEC60613:2010):
Radiographic ...................................................................................................................... 130 kV
Nominal Focal Spot Value (IEC60336:2005):
Large Focus ............................................................................................................................. 1.3
Small Focus ............................................................................................................................. 0.6
Nominal Anode Input Power (at 0.1s) ..................................................................... See rating charts
Large Focus ........................................................................................................................ 32 kW
Small Focus ........................................................................................................................ 11 kW
Nominal Radiographic Input Power (IEC60613:2010):
Large Focus ........................................................................................................................ 29 kW
Small Focus ........................................................................................................................ 10 kW
Anode Speed:
50 Hz ............................................................................................................ Minimum 2700 min-1
Mode of Operation ........................................................................................................... Intermittent
★The information contained herein is presented only as a guide for the applications of our products.
No Responsibility is assumed by TOSHIBA ELECTRON TUBES & DEVICES CO.,LTD.(TETD) for any infringements of patents or other rights of the
third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TETD or others.
★The information contained herein may be changed without prior notice. It is therefore advisable to contact TETD before proceeding with the design of
equipment incorporating this product.
E7846
Mechanical:
Dimensions .................................................................................................. See dimensional outline
Overall Length .................................................................................................................. 220 mm
Maximum Diameter ............................................................................................................ 81 mm
Target:
Anode Angle ............................................................................................................ 13.5 degrees
Diameter ............................................................................................................................ 58 mm
Construction .................................................................... Rhenium-Tungsten faced Molybdenum
Inherent Filtration ........................................................................................At least 0.7 mm Al at 75 kV
Weight (Approx.) ....................................................................................................................... 1.2 kg
Cooling Method ............................................... Oil immersed (80℃ Max.) and convection oil cooling
Absolute Maximum and Minimum Ratings
(At any time, these values must not be exceeded.)
Maximum X-ray Tube Voltage (IEC60613:2010)
Radiographic ...................................................................................................................... 130 kV
Between Anode (or Cathode) and Ground ................................................................................ 65 kV
Minimum X-ray Tube Voltage ................................................................................................... 50 kV
Maximum X-ray Tube Current (IEC60613:2010) .................................................... See rating charts
Large Focus ...................................................................................................................... 500 mA
Small Focus ...................................................................................................................... 220 mA
Maximum Filament Current:
Large Focus .......................................................................................................................... 5.2 A
Small Focus ........................................................................................................................... 4.8 A
Filament Voltage:
Large Focus (At maximum filament current 5.2 A) ..................................................... 6.41 ~ 9.2 V
Small Focus (At maximum filament current 4.8 A) ...................................................... 5.14 ~ 7.0 V
Filament Frequency Limits ................................................................................................ 0 ~ 20 kHz
Continuous Anode Input Power (IEC60613:2010) .................................................... 60 W (82 HU/s)
Thermal Characteristics:
Anode Heat Content ............................................................................................................ 80 kJ
Maximum Anode Heat Dissipation ...................................................................................... 250 W
Environmental Limits
Operating Limits (in dielectric oil):
Oil Temperature ........................................................................................................... 10 ~ 80 ℃
Oil Pressure ............................................................................................................. 70 ~ 140 kPa
Shipping and Storages Limits:
Temperature .............................................................................................................. -20 ~ 70 ℃
Humidity ..........................................................................................................................20 ~ 90 %
(No condensation)
Atmospheric Pressure .............................................................................................. 50 ~ 106 kPa
-2-
E7846
Maximum Rating Charts
(Absolute Maximum Rating Charts)
Conditions: Tube Voltage
Constant Potential High-Voltage Generator
Stator Power Frequency 50 Hz
Nominal Focal Spot Value: 1.3
60kV
500
70kV 50kV
80kV
400
TUBE CURRENT [mA]
90kV
100kV
300 110kV
120kV
130kV
200
100
0
0.01 0.03 0.07 0.2 0.5 1 2 3 5 7 10
0.02 0.05 0.1 0.3 0.7
EXPOSURE TIME [sec]
Refer to IEC60613:2010
Nominal Focal Spot Value: 0.6
50kV
220
200 60kV
180
70kV
TUBE CURRENT [mA]
160
80kV
140
90kV
120 100kV
110kV
100 120kV
80
130kV
60
40
20
0
0.01 0.03 0.07 0.2 0.5 1 2 3 5 7 10
0.02 0.05 0.1 0.3 0.7
EXPOSURE TIME [sec]
Refer to IEC60613:2010
-3-
E7846
Emission & Filament Characteristics
Constant Potential High-Voltage Generator
Nominal Focal Spot Value: 1.3
500 8.5
60KV
450
70kV
400 7.5
100kV
FILAMENT VOLTAGE [V]
TUBE CURRENT [mA]
350
130kV
300 6.5
250
Ef
200 5.5
150 50kV
100 4.5
50
0 3.5
3.4 3.6 3.8 4.0 4.2 4.4 4.6 4.8 5.0 5.2
FILAMENT CURRENT [A]
Note1) For Reference Only
Note2) Refer to IEC60613:2010
Nominal Focal Spot Value: 0.6
220
50kV
200 7.5
60kV
180 70kV
FILAMENT VOLTAGE [V]
TUBE CURRENT [mA]
160 6.5
140 100kV
120 5.5
Ef
130kV
100
80 4.5
60
40 3.5
20
0 2.5
3.4 3.6 3.8 4.0 4.2 4.4 4.6 4.8
FILAMENT CURRENT [A]
Note1) For Reference Only
Note2) Refer to IEC60613:2010
-4-
E7846
Thermal Characteristics
Anode Heating / Cooling Curve
80
70
COOLING
60
HEAT STORAGE [kJ]
50
40
30
60W
20
10 HEATING
0
0 1 2 3 4 5 6 7 8 9 10
TIME [min]
-5-
E7846
Dimensional Outline
Unit mm
φ15.7
10MIN
3.2±0.1 WIDE SLIT
3
M6 12 DEEP
φ46.5MAX
79MIN
127
220
FOCAL SPOT
φ81MAX
φ68.5±2
47MIN
25MAX
110±10
15
CENTRAL X-RAY
FOCAL SPOT FILAMENT
Small
21
Large
Common
Common : Yellow
Large Focal Spot : Blue
Small Focal Spot : Red
Note: Each cathode lead wire is insulated with colored vinyl pipe.
-6-
E7846
OVERSEAS SUBSIDIARIES AND AFFILIATES
EU REPRESENTATIVE
・TOSHIBA ELECTRONICS EUROPE GMBH
HANSAALLEE 181 40549 DÜSSELDORF, GERMANY
PHONE +49 (211) 5296-107 FAX +49 (211) 5296-402
For Sales & Technical Services, please contact the following representative:
・TOSHIBA ELECTRONICS EUROPE GMBH
HANSAALLEE 181 40549 DÜSSELDORF, GERMANY
PHONE +49 (211) 5296-107 FAX +49 (211) 5296-402
・TOSHIBA AMERICA ELECTRONIC COMPONENTS, INC.
2150 EAST LAKE COOK ROAD, SUITE 310
BUFFALO GROVE, ILLINOIS 60089 USA
PHONE +1 (847) 484-2400 FAX +1 (847) 541-7287
・TOSHIBA ELECTRON DEVICES & MATERIALS (SHANGHAI) CO., LTD. (TEMS)
RM1606, SH-PLAZA,
No.336, XIZANG ROAD (MIDDLE), SHANGHAI, 200001, CHINA
PHONE +86 (21) 6361-0077 FAX +86 (21) 6351-5760
(Product Development Engineering Department)
1385 SHIMOISHIGAMI, OTAWARA-SHI, TOCHIGI-KEN, 324-8550, JAPAN
PHONE: +81-287-26-6666 FAX: +81-287-26-6060
http://www.toshiba-tetd.co.jp/
･Toshiba Electron Tubes & Devices Co., Ltd. meets the Environmental Management System Standard, ISO14001.
･Toshiba Electron Tubes & Devices Co., Ltd. meets internationally recognized Standards for Quality Management System ISO9001, ISO13485.
