Product Information: Toshiba X-Ray Tube D-0814

Product Information PI
TOSHIBA X-RAY TUBE

D-0814
Stationary Anode X-ray Tube
 Especially designed for dental X-ray unit.
 These tubes have focus 0.8, and are available

for maximum tube voltage 90 kV.
 Installed in the same enclosure with the high

voltage transformer.
General Data
Electrical:
Circuit:
High Voltage Generator ............................................ Constant Potential High-Voltage Generator
Grounding ......................................................................................................... Center-Grounded
Nominal X-ray Tube Voltage ..................................................................................................... 90 kV
Nominal Focal Spot Value ............................................................................................................ 0.8
Nominal Anode Input Power (at 1.0s) .................................................................................... 1350 W
(See rating charts)
Exposure Duty Cycle ..................................................................................................... 1:60 or more
(Exposure time : interval time)
Mechanical:
Dimensions:
Overall Length ......................................................................................... See dimensional outline
Maximum Diameter ................................................................................. See dimensional outline
Target:
Anode Angle ............................................................................................................... 16 degrees
Material .......................................................................................................................... Tungsten
Inherent Filtration .................................................................................... At least 0.8 mm Al at 45 kV
X-ray Coverage ................................................................................... 354 x 354mm at SID 750 mm
Weight (approx.) ....................................................................................................................... 100 g
Cooling Method .............................................. Oil immersed (60℃ Max.) and convection oil cooling.
Tube Holding: ................................. Holding the glass envelope of the anode end and cathode end,
or the screw of the anode shank.
★The information contained herein is presented only as a guide for the applications of our products.
No Responsibility is assumed by TOSHIBA ELECTRON TUBES & DEVICES CO.,LTD.(TETD) for any infringements of patents or other rights of the
third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TETD or others.
★The information contained herein may be changed without prior notice. It is therefore advisable to contact TETD before proceeding with the design of
equipment incorporating this product.
D-0814
Absolute Maximum and Minimum Ratings

(At any time, these values must not be exceeded.)
Maximum X-ray Tube Voltage .................................................................................................. 90 kV

Between Anode (or Cathode) and Ground ................................................................................ 45 kV
Minimum X-ray Tube Voltage ................................................................................................... 40 kV
Nominal X-ray Tube Current .................................................................................................... 33 mA
(See rating charts)
Maximum Filament Current ........................................................................................................ 3.0 A
Filament Voltage:
At maximum filament current (3.0 A) ............................................................................ 3.0 ~ 3.7 V
Filament Frequency Limits ........................................................... DC or AC (Sine Wave) 0 ~ 20 kHz
Thermal Characteristics:
Anode Heat Content .............................................................................................................. 7 kJ
Maximum Anode Heat Dissipation ...................................................................................... 210 W
Maximum Exposure Time ............................................................................................................. 5 s
Environmental Limits
Operating Limits (in dielectric oil):

Oil Temperature ........................................................................................................... 10 ~ 60 ℃
Oil pressure .............................................................................................................. 70 ~ 140 kPa
Shipping and Storage Limits:
Temperature .............................................................................................................. -40 ~ 70 ℃
Humidity ........................................................................................................................ 10 ~ 90 %
(No condensation)
Atmospheric Pressure ................................................................................................50 ~ 106 kPa
-2-
D-0814
Maximum Rating Charts

(Absolute maximum rating charts)
Constant Potential High-Voltage Generator

Nominal Focal Spot Value: 0.8
35
30
TUBE CURRENT [mA]
40kV
25
50kV
20
60kV
15 70kV
80kV
90kV
10
0.1 0.2 0.3 0.5 0.7 1 2 3 5 7 10
EXPOSURE TIME [s]
Emission & Filament Characteristics
Constant Potential High-Voltage Generator

35 4
40kV
30 60kV 3.5
FILAMENT VOLTAGE [V]
80~90kV
TUBE CURRENT [mA]
25 3
20 2.5
Ef
15 2
10 1.5
5 1
0 0.5
2.0 2.2 2.4 2.6 2.8 3.0
FILAMENT CURRENT [A]

Note: This graph indicates typical characteristics.
-3-
D-0814
Anode Heating / Cooling Curve
7
210W 170W
6
130W
HEAT STORAGE [kJ]
2 COOLING
1
HEATING
0
0 1 2 3 4
TIME [min]
-4-
D-0814
Dimensional Outline of D-0814

Unit: mm
O37MAX.
O33MAX. M5 8 DEEP
O 14
48 ±2
90 ±5
CENTRAL X-RAY
FOCAL SPOT
O32MAX.
8MAX
N C1
N SHORT PIN
O 18.3 F1,F2 : FILAMENT

O 13 C1,C2 : CATHODE
F1 N ： NOT FOR USE
C2
F2
-5-
D-0814
OVERSEAS SUBSIDIARIES AND AFFILIATES
EU REPRESENTATIVE
・TOSHIBA ELECTRONICS EUROPE GMBH
HANSAALLEE 181 40549 DÜSSELDORF, GERMANY
PHONE +49 (211) 5296-107 FAX +49 (211) 5296-402
For Sales & Technical Services, please contact the following representative:
・TOSHIBA ELECTRONICS EUROPE GMBH

HANSAALLEE 181 40549 DÜSSELDORF, GERMANY
PHONE +49 (211) 5296-107 FAX +49 (211) 5296-402
・TOSHIBA AMERICA ELECTRONIC COMPONENTS, INC.

2150 EAST LAKE COOK ROAD, SUITE 310
BUFFALO GROVE, ILLINOIS 60089 USA
PHONE +1 (847) 484-2400 FAX +1 (847) 541-7287
・TOSHIBA ELECTRON DEVICES & MATERIALS (SHANGHAI) CO., LTD. (TEMS)

RM1606, SH-PLAZA,
No.336, XIZANG ROAD (MIDDLE), SHANGHAI, 200001, CHINA
PHONE +86 (21) 6361-0077 FAX +86 (21) 6351-5760
(Product Development Engineering Department)

1385 SHIMOISHIGAMI, OTAWARA-SHI, TOCHIGI-KEN, 324-8550, JAPAN
PHONE: +81-287-26-6666 FAX: +81-287-26-6060
http://www.toshiba-tetd.co.jp/
･Toshiba Electron Tubes & Devices Co., Ltd. meets the Environmental Management System Standard, ISO14001.
･Toshiba Electron Tubes & Devices Co., Ltd. meets internationally recognized Standards for Quality Management System ISO9001, ISO13485.

Product Information: Toshiba X-Ray Tube D-0814

Uploaded by

Copyright:

Available Formats

Product Information: Toshiba X-Ray Tube D-0814

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Product Information: Toshiba X-Ray Tube D-0814

Uploaded by

Copyright:

Available Formats

Product Information PI

TOSHIBA X-RAY TUBE

Stationary Anode X-ray Tube

 Especially designed for dental X-ray unit.

 These tubes have focus 0.8, and are available

 Installed in the same enclosure with the high

Absolute Maximum and Minimum Ratings

Maximum X-ray Tube Voltage .................................................................................................. 90 kV

Operating Limits (in dielectric oil):

Maximum Rating Charts

Constant Potential High-Voltage Generator

EXPOSURE TIME [s]

Emission & Filament Characteristics

Constant Potential High-Voltage Generator

FILAMENT CURRENT [A]

Anode Heating / Cooling Curve

Dimensional Outline of D-0814

O 18.3 F1,F2 : FILAMENT

OVERSEAS SUBSIDIARIES AND AFFILIATES

・TOSHIBA ELECTRONICS EUROPE GMBH

・TOSHIBA AMERICA ELECTRONIC COMPONENTS, INC.

・TOSHIBA ELECTRON DEVICES & MATERIALS (SHANGHAI) CO., LTD. (TEMS)

(Product Development Engineering Department)

You might also like