This document provides a pin arrangement and descriptions for a GMK 6250 Cummins engine install. It lists 24 pins with descriptions of their functions, such as power supply, actuator motor control, temperature control, diagnostics interface, and position feedback. The pins connect to either input or output signals that are routed to an ECU for control and monitoring of the engine and its subsystems.
This document provides a pin arrangement and descriptions for a GMK 6250 Cummins engine install. It lists 24 pins with descriptions of their functions, such as power supply, actuator motor control, temperature control, diagnostics interface, and position feedback. The pins connect to either input or output signals that are routed to an ECU for control and monitoring of the engine and its subsystems.
This document provides a pin arrangement and descriptions for a GMK 6250 Cummins engine install. It lists 24 pins with descriptions of their functions, such as power supply, actuator motor control, temperature control, diagnostics interface, and position feedback. The pins connect to either input or output signals that are routed to an ECU for control and monitoring of the engine and its subsystems.
This document provides a pin arrangement and descriptions for a GMK 6250 Cummins engine install. It lists 24 pins with descriptions of their functions, such as power supply, actuator motor control, temperature control, diagnostics interface, and position feedback. The pins connect to either input or output signals that are routed to an ECU for control and monitoring of the engine and its subsystems.
Download as XLS, PDF, TXT or read online from Scribd
Download as xls, pdf, or txt
You are on page 1/ 1
GMK 6250 Cummins Engine Install
Turntable Engine E-Gas Compact Pin Arrangement
PIN Description Function Input Or Signal Connection Output
1 Terminal 15 Power Supply (Positive) Input Direct Current+BE630.A5 -X23 8
+BE630.S2 -X100 1 2 Motor - Actuator Motor (Minus) Output Cycled By ECU +BE630.A5 -X33 1 3 Not Used 4 Not Used 5 Not Used 6 Not Used 7 Not Used 8 Brake Tempostat Cutout Input Digital +BE630.A5 -X23 3 9 Not Used 10 Not Used 11 Pot + Power Supply (Pos.), Actuator and Setpoint Potentiometer Output Digital +BE630.A5 -X33 15 12 Pot - Power Supply (Neg.), Actuator and Setpoint Potentiometer Output Digital +BE630.A5 -X33 13 13 Fault Lamp Fault Indication / Activation Of Flashing Code Output/Input Digital +BE630.A5 -X23 13 14 Terminal 31 Power Supply (Minus) Input Digital +BE630.A5 -X23 14 15 Motor + Actuator Motor (Positive) Output Clocked By ECU +BE630.A5 -X33 7 16 Tempostat Off Tempostat Or Variable ADR Function Cutout Input Digital +BE630.A5 -X23 9 17 PWM 2 Pedal Unit Set Value Input PWM +BE630.A5 -X23 2 18 Not Used 19 S-B Reduce Tempostat Or Variable ADR Speed Input Digital +BE630.A5 -X23 11 20 S+B Increase Tempostat Or Variable ADR Speed Input Digital +BE630.A5 -X23 10 21 Not Used 22 Not Used 23 Diag Diagnosis Interface Input/Output Digital +BE630.S2 -X100 3 24 Pot Wiper Arm Actuator Position Checkback Signal / GLR Signal Input Analogue +BE630.A5 -X33 14 25 SPS SWG Setpoint Sender Position Setpoint Input Analogue +BE630.A5 -X23 1
TB-9-2920-225-34-1 Department of The Army Technical Bulletin, 100 Amp Regulator (Solid State) NSN 2920-00900-7933, Checkout and Repair Procedures, Headquarters, Department of The Army 10 November 1981
