Scribd
Upload
885 views3 pages

Test Case Drone

This document contains test cases for a drone. Test case TV001 checks that batteries are sufficiently charged between 30-90% and stops charging at 100%. Test case TV002 checks that motors are rotating in the correct direction without propellers. Test case TV003 checks camera image quality by observing the video feed from the drone. Test case TV004 checks that the compass readings and direction of drone movement match expectations and checks for interference. All test cases passed.

Uploaded by

sayrah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
885 views3 pages

Test Case Drone

This document contains test cases for a drone. Test case TV001 checks that batteries are sufficiently charged between 30-90% and stops charging at 100%. Test case TV002 checks that motors are rotating in the correct direction without propellers. Test case TV003 checks camera image quality by observing the video feed from the drone. Test case TV004 checks that the compass readings and direction of drone movement match expectations and checks for interference. All test cases passed.

Uploaded by

sayrah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Test Case ID TV001

Title Check and charge batteries

Description Make sure all batteries are sufficiently


charged including drone, controller, additional
control station units and any spares that you
might have
You shouldn't overcharge your batteries; nor
should you allow them to completely
drain. Ideally, the charge should be kept within
the range of 30 - 90%.
Test Data If batterie is lower than 30%
If batterie is between 30% to 90% ideal
If batterie is 100% then full
Expected Output If batterie is 100% then Stop the charging

Pass / Fail / Not executed / Suspended Pass

Test case of Drone


By Sayeedur Rahman
Test Case ID TV002

Title Test motors

Description Time to begin testing the drone. Before we


see how the propellers perform in-flight, we
should test that the motors are working
correctly.

Test Data  Remove propellers

 Insert drone batteries


 Insert controller batteries
 Power on drone
 Refer to manual for correct motor
direction
 Test motors are rotating in correct
direction

Expected Output Drone is Flying

Pass / Fail / Not executed / Suspended Pass

Test Case ID TV003

Title Test camera

Description You can test the camera by simply observing


the quality of the video feed and assessing
variables like image quality (in combination
with capture conditions) and specific camera
functions (such as night-vision).
Test Data  Remove drone and controller
batteries
 Check and recharge drone and
controller batteries to 75%
 Re-insert drone and controller
batteries
 Place drone on a stable, flat surface
 Power on drone and controller
 Activate camera feed
 Assess camera image quality

Expected Output Access images/videos from drone


Pass / Fail / Not executed / Suspended Pass

Test Case ID TV004

Title Test compass

Description Testing the compass is as straightforward as


launching the control software and observing
both compass readings and local
interference levels.
Test Data  Open drone control software
 Check compass readings are correct
 Check for local interference
 Perform test flight

Expected Output Drone Move in Same direction as expexted

Pass / Fail / Not executed / Suspended Pass

You might also like