Compact Valves

The Industry Standard

Compact solutions for complex projects.

Compact Solutions
for Complex Projects
When space and weight considerations are vital for your high-pressure Manufactured only from the
topside applications in shallow water, deepwater and ultra-deepwater. highest quality materials
FMC Technologies' compact valves have been the standard for more FMC Technologies’ compact
than 40 years. valves are manufactured from
If your project requires compact valves, you can rest assured that with the highest quality materials to
FMC Technologies, you are getting the highest-quality, most trusted ensure safety, enhancing the
valves in the industry. As a global company, part of our mission is value to our customers. All of our
to embrace the Absolutes of Quality (Requirements, Prevention, Zero compact valve pressure-containing
Defects, Measure, Create Customer Success), and through stringent components are made using
conformance to customer requirements, and a zero-defect performance materials that are fully traceable,
standard, we generate success for our customers. We invented and as well as both destructive and
wrote the book on compact valves. But it didn’t stop there. We’ve non-destructive tested, assuring
been improving on it ever since. material performance under all
specified conditions. All valves
are pressure-tested at the
CONTENTS factory before shipment, and
documentation is provided via the
available valve data books. Our
Compact Valves commitment to producing products
that meet 100% of requirements
Gen II Floating Ball Valves 04
with zero defects can be witnessed
Gen II Trunnion Mounted Ball Valves 06
by our customers at all stages of
Compact Check Valves 08
manufacturing.
Double Ball Valves 10
Our Compact Valves set the
Poppet Diverter Valves 12
standard
Throttle Valves 13
Reliability can mean the difference
between profit and loss for all
Dimensions / Trim Codes of our customers, therefore,
Soft-Seated Floating Ball Valves 14 we are committed to providing
Trunnion Mounted Soft-Seated Ball Valves 17 equipment, solutions, service and
Compact Check Valves 22 quality, health, safety, environment
Poppet Diverter Valves 26 performance that deliver one
hundred percent of the time.
Throttle Valve 27
Common End Connections 28

2 |
FMC Technologies:
Quality in everything we do for over 135 years
Since we were first founded back in the late 1800s, FMC
Technologies has lived by a set of core values that defines
not only who we are, but how it shapes our behavior and
sets us apart from others in the industry. Through the
years we have refined our core values to reflect a further
commitment to quality and customer success.

FMC Technologies’ Compact Valves:

The best keeps getting better
With over three decades of experience encompassing our manifold design meets all aspects of the process and
a multitude of global projects, FMC Technologies is the instrument diagrams (P&ID). This close alignment reduces
preferred supplier of compact valves for high-pressure unplanned budgetary risk as the project progresses.
production, injection, and launcher/receiver applications From project inception to installation and after-sales service,
for exploration and production companies. FMC Technologies provides single source responsibility for
While your projects may be complex, our approach is your complete project.
not. Our valves are designed to last. In addition, all of our
compact valves are available with API monogramming,
New features, legacy performance
PSL1, PSL2, PSL3 certification, as well as country of origin
flexibility so you know you are always getting the quality Our Gen II Floating Ball Valves, Trunnion Mounted Ball
products that meet your projects’ technical requirements. Valves and Swing Check Valves contain a wealth of new
Custom quality solutions have been always been the design features while still maintaining the robust qualities
hallmark of FMC Technologies from our inception. of the original Compact Valve Gen I product line. The
new features are designed to enhance safety, regulatory
We provide lightweight compact valves in a variety of sizes,
compliance and tough performance in-the-field.
designs and materials aimed to meet all customer and
industry requirements. With our ability to offer bare stem To complement the soft-seated Gen II Compact Valve
valves, valves with automation and manifold systems on a product line, FMC Technologies also manufactures metal-
complete turnkey basis, FMC Technologies is helping our seated Compact Ball Valves, Poppet Diverter Valves, Double
customers meet the technical and economic challenges for Ball Valves and Compact Throttle Valves, giving you the
high-pressure manifold applications. Our manifold systems flexibility to produce the most compact piping systems
design team works as an integral part of your front end possible, while satisfying the most rigorous of design
engineering and design (FEED) phase. Our team works requirements.
with your piping and instrumentations engineers to ensure

FMC Technologies Inc. / Compact Valves | 3

 Gen II Floating
Compact Ball Valve
(ANSI 1500, ANSI 2500, API 10k) (1” through 4”)

SAFETY FEATURES ROBUST PERFORMANCE

»» The retainer is threaded to the body using a Stub »» The stronger weldneck end connections allow for bending
Acme thread for durability and strength. This makes loads up to 50% of pipe yield at full working pressure, and
the valve fully pressure-containing without an end up to 100% of pipe yield at no pressure, assuming a pipe
connection installed on the retainer end if the retainer yield strength of 36,000 psi.
is inadvertently removed. Our retainers are coated
with Xylan for both corrosion protection and ease of »» The large 1⁄4 inch gap between the flange face and the
maintenance. body allows for improved corrosion protection, thereby
eliminating the need for corrosion gaskets. This allows the
»» The stem is retained by a shoulder in the body, not use of three-part paint systems between the flange and
the bonnet, making the stem fully blow-out proof. valve, and helps in removing the valve from the line for any
required maintenance.
»» Our valves have dedicated, built-in automation
mounting locations in either the valve body or bonnet, »» Because FMC Technologies integrates matching bolt
allowing for field installation of automation without patterns and flange sizes on both ends of the valve,
any pressure-containing fasteners being loosened. assembly issues found in many conventional compact valve
designs are eliminated.

COMPLIANCE »» The handle incorporates wrench flats, allowing the valve to

»» Gen II Compact Ball Valves are designed in accordance be operated without an extension handle. An integral stop
with API 6A and API 6D. plate is included so an FMC Technologies locking device can
be installed.
»» Gen II Compact Ball Valves are fully compliant with
the latest revisions of NACE MR0175-2003 which »» Automation Interface: To simplify adaptation between the
severely limits the use of 17-4 stainless steels for actuator and the stem, the stem is manufactured round
valve stems, as well as completely eliminating its use with keyways. The unique design allows it to shear outside
for pressure-containing components such as bodies, of the pressure boundary in the event of overload torque.
bonnets and retainers. In addition, the bonnet is keyed to the body, eliminating
rotation when the valve is fitted with an actuator.
»» Our Gen II Compact Ball Valves incorporate a “zero
line spread” end connection that is fully compliant »» 316 stainless steel nameplates are permanently installed
with ASME B 31.3 Chapter 9 and ASME B 31.8. with stainless steel screws.

»» Gen II Floating Compact Ball Valves use the same »» The body is slightly over-bored allowing for easy removal
sealing technologies of our Gen I Compact Valves, of valve components for maintenance. The carriers can be
which have been fire tested to API 6FA and BS 6755 removed without removing the stem.
Part 2. »» The stem seal seals to both the body and the stem,
eliminating the need for a bonnet-to-body seal, meaning
fewer leak paths than conventional compact valves. For
valves larger than 3", easy external access to the stem seal
is achieved by removing the bonnet.

»» Valve bore sizes are chosen to closely match the most

popular pipe bores, minimizing flow turbulence in the valve
bore.

4 |
 Stem Seal, seals between stem
and body to reduce external leak
paths by eliminating a bonnet to
body seal.
Stem retained by body,
not a bolted bonnet.

Retainer threaded to body using

Stub Acme thread
(Makes valve pressure containing
without flanges installed.)

Large flange gap allows

for 3-part paint system to
prevent corrosion.

FMC Technologies Inc. / Compact Valves | 5

 Gen II Trunnion Mounted
Compact Ball Valve
(ANSI 1500, ANSI 2500, API 10k) (4” through 12”)

SAFETY FEATURES ROBUST PERFORMANCE

»» The retainer is threaded to the body using a Stub »» The trunnion design allows lower actuation torque in the
Acme thread for durability and strength. This makes valve allowing a smaller actuator to operate the valve.
the valve fully pressure-containing without an end »» The stronger weldneck end connections allow for bending
connection installed on the retainer end if the retainer loads up to 50% of pipe yield at full working pressure, and
is inadvertently removed. Our retainers are coated up to 100% of pipe yield at no pressure, assuming a pipe
with Xylan for both corrosion protection and ease of yield strength of 36,000 psi.
maintenance.
»» The large 1⁄4 inch gap between the flange face and the
»» Our valves have dedicated, built-in automation body allows for improved corrosion protection, thereby
mounting locations in either the valve body or bonnet, eliminating the need for corrosion gaskets. This allows the
allowing for field installation of automation without use of three-part paint systems between the flange and
any pressure-containing fasteners being loosened. valve, and helps in removing the valve from the line for any
Many other conventional compact valves require required maintenance.
removal and reinstallation of bonnet fasteners in
order to install the actuator mounting hardware. »» Because FMC Technologies integrates matching bolt
patterns and flange sizes on both ends of the valve,
»» Gen II Trunnion Mounted Compact Ball Valves have assembly issues found in many conventional compact valve
a standard double block-and-bleed capability. Every designs are eliminated.
valve body is fitted with a stainless body bleed fitting,
which allows easy bleeding of the body cavity. »» The handle incorporates wrench flats, allowing the valve to
be operated without an extension handle. An integral stop
plate is included so an FMC Technologies locking device can
COMPLIANCE be installed.
»» Automation Interface: To simplify adaptation between the
»» Gen II Compact Ball Valves are designed in accordance
actuator and the stem, the stem is manufactured round
with API 6A and API 6D.
with keyways. The unique design allows it to shear outside
»» Gen II Compact Ball Valves are fully compliant with of the pressure boundary in the event of overload torque.
the latest revisions of NACE MR0175-2003 which In addition, the bonnet is keyed to the body, eliminating
severely limits the use of 17-4 stainless steels for rotation when the valve is fitted with an actuator.
valve stems, as well as completely eliminating its use
»» 316 stainless steel nameplates are permanently installed
for pressure-containing components such as bodies,
with stainless steel screws.
bonnets and retainers.
»» The trunnion-mounted ball reduces actuation torque by as
»» Our Gen II Compact Ball Valves incorporate a new
much as 50%, compared to conventional compact floating
“zero line spread” end connection that is fully
ball valves.
compliant with ASME B 31.3 Chapter 9 and ASME B
31.8. »» To ensure long life and low valve torque, the trunnion
bearings are self-lubricating.
»» Gen II Trunnion Mounted Ball Valves have been fire
tested to API 6FA, API 607, and BS 6755 Part 2. »» Our seat assembly incorporates one-piece wave springs for
ease of maintenance and reliability.
»» The standard PEEK seat insert offers superior chemical and
temperature compatibility over other soft-seat materials.
»» Valve bore sizes are chosen to closely match the most
popular pipe bores, minimizing flow turbulence in the valve
bore.

6 |
 Retainers threaded to body
using Stub Acme thread. Makes
valve pressure containing
without flange installed.
Spring loaded seats for superb
low pressure sealing.

Large flange gap allows for 3

part paint system installation
to prevent corrosion.
Trunnion mounted
ball for low torque
operation.

FMC Technologies Inc. / Compact Valves | 7

 Gen II
Compact Check Valve
(ANSI1500, ANSI2500, API 10k) (1” through 12”)

SAFETY FEATURES ROBUST PERFORMANCE

»» FMC Technologies’ internally captured pivot pin »» Our Gen II Check Valves incorporate a specially designed
reduces external leak paths when compared to tailpiece, allowing the flapper check valve to open fully,
conventional compact check valves. while still maintaining the shortest overall valve length.
»» Our blowout-proof seat design eliminates need to »» The stronger weldneck end connections allow for bending
have a downstream end connection installed for loads up to 50% of pipe yield at full working pressure, and
pressure containment. up to 100% of pipe yield at no pressure, assuming a pipe
yield strength of 36,000 psi.

COMPLIANCE »» The large 1⁄4 inch gap between the flange face and the
body allows for improved corrosion protection, thereby
»» Gen II Compact Check Valves are designed in eliminating the need for corrosion gaskets. This allows the
accordance with API 6A and API 6D. use of three-part paint systems between the flange and
»» Gen II Compact Check Valves are fully compliant with valve, and helps in removing the valve from the line for any
the latest revision of NACE MR0175- 2003 which required maintenance.
severely limits the use of 17-4 PH stainless steels »» 316 stainless steel nameplates are permanently installed
for pressure containing components such as valve with stainless steel screws.
bodies and pressure containing seats.
»» Valve bore sizes are chosen to closely match the most
»» Gen II Compact Ball Valves incorporate a new “zero popular pipe bores, minimizing flow turbulence in the valve
line spread” end connection that is fully compliant bore.
with ASME B 31.3 Chapter 9 and ASME B 31.8.
»» Gen II Check Valves 2” through 12” have been fire
tested and certified to API 6FD.

8 |
 Internally captured pivot pin
eliminates external leak path

Flapper spring loaded

for low pressure sealing
performance.

Stainless steel seat for superior

corrosion resistance.
Tailpiece designed to allow
valve to fully open while
reducing valve length.
Seat seal ring out of direct
flow path for long life.

Large flange gap allows for 3

part paint system installation to
prevent corrosion.

FMC Technologies Inc. / Compact Valves | 9

 Gen II
Compact Double Ball Valve
(ANSI 1500, ANSI 2500, API 10k) (1” through 12”)

SAFETY FEATURES ROBUST PERFORMANCE

»» FMC Technologies’ Compact Double Ball Valve offers »» The Gen II Compact Double Ball Valves incorporate many of
true double block-and-bleed safety. Having two the same design features of the Gen II Ball Valve, with two
valves in one solid body means two physical barriers valves in one solid body.
to pressure when working downstream of the closed
valve. »» The stronger weldneck end connections allow for bending
loads up to 50% of pipe yield at full working pressure, and
»» The retainer is threaded to the body using a Stub up to 100% of pipe yield at no pressure, assuming a pipe
Acme thread for durability and strength. This makes yield strength of 36,000 psi.
the valve fully pressure-containing without an end
connection installed on the retainer end if the retainer »» The large 1⁄4 inch gap between the flange face and the
is inadvertently removed. Our retainers are coated body allows for improved corrosion protection, thereby
with Xylan for both corrosion protection and ease of eliminating the need for corrosion gaskets. This allows the
maintenance. use of three-part paint systems between the flange and
valve, and helps in removing the valve from the line for any
»» The center bleed port between the valves permits required maintenance.
testing of either valves performance before
conducting any maintenance work downstream of »» 316 stainless steel nameplates are permanently installed
the valve. with stainless steel screws.

»» Valve bore sizes are chosen to closely match the most

COMPLIANCE popular pipe bores, minimizing flow turbulence in the valve
bore.
»» Double block and bleed valves are designed in
accordance with API 6A and API 6D. »» Because we are a collaborator and not just a manufacturer/
supplier, FMC Technologies will produce custom valve
»» Double block and bleed Compact Ball Valves are designs to fit your space and actuation needs, anywhere
fully compliant with the latest revisions of NACE in the world.
MR0175-2003 which severely limits the use of
17-4 PH stainless steels for valve stems, as well as »» Please consult the factory for your valve end-to-end
completely eliminating its use for pressure-containing dimensions.
components such as bodies and bonnets.
»» Gen II Compact Double Ball Valves are available in floating
»» Gen II Compact Double Ball Valves incorporate a valve design in 1” through 4” sizes, and in trunnion valve
new “zero line spread” end connection that is fully design in 4” through 12”.
compliant with ASME B 31.3 Chapter 9 and ASME B
31.8 »» The trim is the same as floating and trunnion valves.

»» Our valves have been fire tested and certified to API

6FA, API 607 and BS 6755 Part 2.

10 |
 Threaded retainers have valve
fully pressure containing
with or without installed end
connections. Threaded retainers have valve
fully pressure containing with or
without installed end connections.

Single piece body houses two valves.

Creates 2 physical barriers between
pressure and downstream work.
Integral bleed port allowing
verification of valve sealing
with line pressurized.

1 Custom valve design to fit customers space and actuation needs.

2 Consult factory for valve end-to-end dimensions.
3 Available in floating valve design in 1” through 4” sizes.
4 Available in trunnion valve design in 4” through 12”.
5 Trim same as floating and Trunnion valves.

FMC Technologies Inc. / Compact Valves | 11

 Compact Poppet
Diverter Valve
(ANSI 1500, ANSI 2500) (2” through 6”)

UNIQUE FEATURES OF FMC TECHNOLOGIES’

COMPACT POPPET DIVERTER VALVE
»» This valve is primarily used in compact manifolds to »» FMC Technologies’ built-in fail-safe actuation permits
safely and successfully transform header valves into remote operation, and biases flow to the lower port on any
safety valves. loss of actuator pressure.

»» Our modular design allows the inlet to be placed on »» The recessed sealing components minimize the effects of
either side of the valve. erosion, meaning reduced maintenance and downtime.

»» The unique, patented design equalizes pressure across

the seats to balance the poppet and reduce the actuation
forces.

»» The Compact Poppet Diverter Valve uses a conventional

compact flange.

»» The FMC Technologies valve enables you to divert flow from

one line to another with just a single valve.

Integral actuator operates

pneumatically, hydraulically
or with field gas.

Positive spring return divers

flow to lower outlet on loss
of cylinder pressure.
Small bleed ports balance
pressure across seats to minimize
throttling and vibrations.

Modular design allows

inlet to be located on
either side of valve.

Sealing components
are positioned out
of flow stream to
minimize erosion.

12 |
Throttle Valve
(ANSI 1500, ANSI2500, API 10k)
(1” through 4”)

UNIQUE FEATURES OF FMC TECHNOLOGIES’

THROTTLE VALVE
»» FMC Technologies’ throttle ball valves are based on »» The unique ball design enables precise throttling with
the 1B valves, and include modified ball ports to minimum erosion resistance.
permit flow control. As a result, the features of 1B
valves apply. »» The retainer is threaded to the body using a Stub Acme
thread for durability and strength. This makes the valve
»» The valve was custom-designed to meet the demands fully pressure-containing without flanges installed.
of virtually all throttling applications.
»» The stem seal seals between the stem and the body to
»» Flow passage is engineered specifically for high reduce external leak paths.
pressure drop throttling service with precise control
throughout the operating range. »» The stem is retained by a shoulder in the body, not the
bonnet.
»» It delivers higher linear flow rates than any equivalent
positive choke. »» Flow passage is designed specifically for high pressure -
drop throttling service with precise control throughout the
»» The valve features a flow indicator for precise flow operating range.
control.

Indicator at top of valve for

precise control.

Stem retained by body not a

Stem seal seals between bolted bonnet.
stem and body to reduce
external leak paths.

Retainer threaded
to body using
Flow passage designed stub Acme
specifically for high thread - makes
pressure - drop throttling valve pressure
service with precise containing
control throughout the without flanges
operating range. installed.

FMC Technologies Inc. / Compact Valves | 13

 SOFT-SEATED FLOATING BALL VALVE - (1" - 4")
BALL VALVE KEY

A. Bore
B. Valve Group Length
C. Overall Length (WNF x WNF)
C. Overall Length (SWF x WNF)
D. Body Outer Diameter
E. Handle Height
F. Bonnet Height
G. Weldneck Length
G. Nipple Length

1" THROUGH 4" DIMENSIONS - ENGLISH

Valve Overall Overall
Ball Valve Working Group Length Length Body Outer
Model Nominal Pressure Weight Bore Length (WNF x (SWF x Diameter Handle Bonnet Weldneck Nipple
Number Pipe Size (psi) (lbs) (inch) (inch) WNF) WNF) (inch) Height Height Length Length
A B C C D E F G G
1B-K0081 1 10000 26 0.81 4.00 8.25 N/A 4.50 4.28 2.25 2.13 N/A
1B-G0150 2 6250 70 1.50 4.88 12.25 12.69 6.50 5.16 3.13 3.69 4.13
1B-K0150 2 10000 99 1.50 6.00 15.25 15.88 7.00 5.38 3.28 4.63 5.25
1B-F0209 3 3750 95 2.09 5.38 14.13 14.25 7.13 5.45 3.44 4.38 4.50
1B-F0263 * 3 3750 129 2.63 6.63 13.38 13.75 7.88 7.46 4.91 3.38 3.75
1B-G0230 * 3 6250 151 2.30 6.88 15.63 16.13 7.88 7.33 4.91 4.38 4.88
1B-G0259 * 3 6250 167 2.59 7.13 15.63 16.50 8.38 7.54 5.11 4.25 5.13
1B-K0213 * 3 10000 175 2.13 7.75 15.25 15.63 8.50 8.18 5.16 3.75 4.13
1B-F0344 * 4 3750 196 3.44 7.75 15.25 15.50 9.25 7.98 5.54 3.75 4.00
1B-F0383 * 4 3750 235 3.83 8.25 16.25 16.88 10.25 9.09 6.03 4.00 4.63
1B-G0315 * 4 6250 230 3.15 8.38 16.63 17.13 9.50 8.72 5.66 4.13 4.63
1B-G0363 ** 4 6250 327 3.63 9.25 17.63 18.25 11.00 10.07 6.52 4.13 4.75
1B-K0306 ** 4 10000 434 3.06 10.25 19.50 20.00 12.25 10.70 7.15 4.63 5.13

1" THROUGH 4" DIMENSIONS - METRIC

Valve Overall Overall
Ball Valve Working Group Length Length Body Outer
Model Nominal Pressure Weight Bore Length (WNF x (SWF x Diameter Handle Bonnet Weldneck Nipple
Number Pipe Size (psi) (kg) (mm) (mm) WNF) WNF) (mm) Height Height Length Length
A B C C D E F G G
1B-K0081 1 10000 11.79 21 102 210 N/A 111 109 57 54 N/A
1B-G0150 2 6250 31.75 38 124 311 322 165 131 80 94 105
1B-K0150 2 10000 44.91 38 152 387 403 178 137 83 117 133
1B-F0209 3 3750 43.09 53 137 359 362 181 138 87 111 114
1B-F0263 * 3 3750 58.51 67 168 340 349 200 189 125 86 95
1B-G0230 * 3 6250 68.49 58 175 397 410 200 186 125 111 124
1B-G0259 * 3 6250 75.75 66 181 397 419 213 192 130 108 130
1B-K0213 * 3 10000 79.38 54 197 387 397 216 208 131 95 105
1B-F0344 * 4 3750 88.91 87 197 387 394 235 203 141 95 102
1B-F0383 * 4 3750 106.60 97 210 413 429 260 231 153 102 118
1B-G0315 * 4 6250 104.33 80 213 422 435 241 221 144 105 118
1B-G0363 ** 4 6250 148.33 92 235 448 464 279 256 166 105 121
1B-K0306 ** 4 10000 196.86 78 260 495 508 311 272 182 117 130

* Dimension “F” reflects the standard bonnet provided. Bonnets for close coupling of actuation are available on request. When the close coupling bonnet is provided,
dimension “F” increases 0.250 inches.
** 1B-G0363 & 1B-K0306 are not available with handles for lever operation. Close coupling bonnet is provided as standard dimension “F” shown is for close coupling bonnet.

14 |
 TRIM SOFT-SEATED FLOATING BALL VALVE - TRIM CODES
CODES Trim coding for the new valve is very different from the legacy system. Ball valve trim is a nine-
digit, alphanumeric code that identifies the materials of construction and the type of service,
actuation, grease, and other features. The trim code positions are defined below.

BALL VALVE CODE = 1B-K0081-XXXXXXXXX

MODEL NUMBER – TRIM CODES
XX-XXXXX – 1 2 3 4 5 6 7 8 9
1B-K0081 – X X X X X X X X X

1. BODY, BONNET, AND RETAINER MATERIAL 5. CARRIER AND BODY SEAL MATERIAL
Standard = 1 Standard = 1 or 5
1 4130 Body, Bonnet & Retainer 1 Nitrile
A Duplex Body, Bonnet & Retainer 5 Viton A
B Super Duplex Body, Bonnet & Retainer A James Walker Elast-o-Lion 101
F 410 SS Body, Bonnet & Retainer B James Walker Elast-o-Lion 985
N Inconel 625 Body, Bonnet & Retainer H Greene Tweed 926
P 4130 / Inconel 625 Fully Clad Body, Bonnet & Retainer
Q 4130 / Inconel 625 Partial Clad Body, Bonnet & Retainer
6. STEM SEAL AND BACKUP MATERIAL
Standard = 1 or 2
2. BALL MATERIAL AND COATING 1 Nitrile Jacket / Nitrile O-spring / PEEK Backup
Standard = 1 or 6 2 Viton Jacket / Viton O-spring / PEEK Backup
1 A350-LF2 - .003” ENP Standard R Virgin Teflon Jacket / Elgiloy Spring / PEEK Backup
3 4130 - .003” ENP Standard
6 17-4PH - .0004” Chrome
7. SEAT MATERIAL
7 410 - .0004” Chrome
Standard = C or P
D Duplex - .0004” Chrome
C Celcon
H Super Duplex - .0004” Chrome
P PEEK
N Inconel 718 - .0004” Chrome

8. ACTUATION STYLE
3. STEM MATERIAL AND COATING
Standard = 1
Standard = 1
1 Handle or Lever
1 4130 - QPQ
2 Handle or Lever with Locking Device
D Duplex
6 Bare Stem
H Super Duplex
F Gear Operator with Hand wheel
M Inconel 625
G Gear Operator with Hand wheel and Locking Device
N Inconel 718

9. SERVICE, GREASE, AND BONNET BOLTING MATERIAL

4. CARRIER MATERIAL AND COATING
Standard = 1
Standard = 1 or 6
1 Standard Grease, B7M / L7M Bonnet Bolting
1 4130 Alloy
3 Standard Grease, Grade 660 Bonnet Bolting
6 17-4PH
A Low Temperature Grease, B7M / L7M Bonnet Bolting
D Duplex
C Low Temperature Grease, Grade 660 Bonnet Bolting
H Super Duplex
Y Oxygen / Air Service Grease, B7M / L7M Bonnet Bolting
N Inconel 625
Z Oxygen / Air Grease, Grade 660 Bonnet Bolting
R 410 Stainless

1 Nipple and weldneck lengths are not necessarily the same. Valves are typically provided with weldneck flanges at both ends. Nipples / swivel flanges may be used at either
end of the valve as an option (except as noted above)
2 Weights listed are approximate and include the standard weldneck flanges at each end. Pipe schedule, swivel flanges, actuation mounting hardware, etc., may affect the
final assembly weight.

FMC Technologies Inc. / Compact Valves | 15

SOFT-SEATED FLOATING BALL VALVE - (1" - 4")

SOFT-SEATED FLOATING BALL VALVES

ITEM DESCRIPTION QTY ITEM DESCRIPTION QTY
1 BODY 1 13 GREASE FITTING 1
2 BALL 1 14 STEM SEAL: OPTISEAL TYPE S LIP 1
3 THRUST RING 1 15 SEAT 2
4 STEM 1 16 BACKUP RING 1
5 CARRIER 2 17 KEY 2
6 RETAINER 1 18 NAMEPLATE 1
7 BONNET 1 19 SELF TAPPING SCREW 3
8 BUSHING: BONNET 1 20 SET SCREW: 5/8 X .63 LG 11
9 O-RING 2 21 HANDLE 1
10 O-RING 1 22 CAPSCREW: SOC HD 5/8 1.00 LG 1
11 "L" SEAL 2 23 CAPSCREW: SOC HD 1 X 1.75 LG 1
12 CAPSCREW 8 24 FLAT WASHER: TYPE B, 1 W 1

23

24

17

21

12
9
6 20
10
7
11
5 8
15
2 16
15
4
5
11
14
13
3

20

9
19 18 20

16 |
 TRUNNION SOFT-SEATED BALL VALVE - (1" - 12")
BALL VALVE KEY

A. Bore
B. Valve Group Length
C. Overall Length (WNF x WNF)
C. Overall Length (SWF x WNF)
D. Body Outer Diameter
E. Handle Height
F. Bonnet Height
G. Weldneck Length
G. Nipple Length

1" THROUGH 12" DIMENSIONS - ENGLISH

Valve Overall Overall
Working Group Length Length Body Outer
Ball Valve Nominal Pressure Weight Bore Length (WNF x (SWF x Diameter Handle Bonnet Weldneck Nipple
Model Number Pipe Size (psi) (lbs) (inch) (inch) WNF) WNF) (inch) Height Height Length Length
A B C C D E F G G
2B-F0344 4 3750 192 3.44 8.25 15.75 16.00 9.25 7.27 5.59 3.75 4.00
2B-F0383 4 3750 257 3.83 9.25 17.25 18.00 10.25 7.64 6.09 4.00 4.75
2B-G0315 4 6250 230 3.15 8.88 17.13 17.63 9.50 7.35 5.72 4.13 4.63
2B-G0363 4 6250 308 3.63 9.75 18.50 18.75 10.63 7.79 6.28 4.38 4.63
2B-K0306 4 10000 346 3.06 10.50 19.75 20.25 10.88 7.96 6.36 4.63 5.13
2B-F0406 5 3750 291 4.06 9.00 17.50 18.25 10.63 7.78 6.26 4.25 5.00
2B-G0406 5 6250 420 4.06 11.00 20.50 21.25 11.88 8.46 6.86 4.75 5.00
2B-F0519 6 3750 487 5.19 11.00 20.50 21.50 12.88 8.96 7.36 4.75 5.75
2B-G0490 6 6250 766 4.90 13.00 24.50 24.75 14.63 10.86 8.73 5.75 6.00
2B-K0406 6 10000 716 4.06 13.50 25.00 25.00 13.88 10.47 8.34 5.75 5.75
2B-K0513 6 10000 1227 5.13 16.00 28.50 29.00 16.88 12.44 9.81 6.25 6.75
2B-F0709 8 3750 937 7.09 14.25 25.75 25.75 16.13 11.61 9.48 5.75 5.75
2B-G0709 8 6250 1271 7.09 16.75 29.75 30.25 17.88 12.95 10.32 6.50 7.00
2B-K0609 8 10000 1848 6.09 19.00 33.50 34.00 20.13 14.70 11.44 7.25 7.75
2B-K0709 8 10000 2630 7.09 22.25 39.75 39.75 22.75 16.02 12.76 8.75 8.75
2B-F0909 10 3750 1673 9.09 17.00 30.50 31.50 19.88 13.98 11.34 6.75 7.75
2B-G0850 10 6250 2193 8.50 20.75 36.25 37.25 21.38 15.35 12.09 7.75 8.75
2B-G0909 10 6250 2485 9.09 21.25 37.75 38.50 22.63 15.86 12.72 8.25 9.00
2B-K0763 10 10000 3338 7.63 24.25 42.75 42.75 2.63 17.18 13.72 9.25 9.25
2B-F1075 12 3750 2536 10.75 20.00 36.50 37.50 23.25 16.35 13.03 8.25 9.25
2B-G1013 12 6250 3233 10.13 23.00 41.00 42.00 25.13 17.43 13.97 9.00 10.00
2B-G1075 12 6250 3828 10.75 24.00 43.50 44.25 26.25 17.92 14.53 9.75 10.50
2B-F1140 12 3750 3201 11.40 21.25 40.25 40.25 24.75 16.92 13.78 9.50 9.50

1 Dimension “F” reflects the standard bonnet provided. Bonnets for close coupling of actuation are available on request. When the close coupling bonnet is provided,
dimension “F” increases 0.250 inches.
2 1B-G0363 & 1B-K0306 are not available with handles for lever operation. Close coupling bonnet is provided as standard dimension “F” shown is for close coupling bonnet.

FMC Technologies Inc. / Compact Valves | 17

 TRUNNION SOFT-SEATED BALL VALVE - (1" - 12")
BALL VALVE KEY

A. Bore
B. Valve Group Length
C. Overall Length (WNF x WNF)
C. Overall Length (SWF x WNF)
D. Body Outer Diameter
E. Handle Height
F. Bonnet Height
G. Weldneck Length
G. Nipple Length

1" THROUGH 12" DIMENSIONS - METRIC

Valve Overall Overall
Working Group Length Length Body Outer
Ball Valve Nominal Pressure Weight Bore Length (WNF x (SWF x Diameter Handle Bonnet Weldneck Nipple
Model Number Pipe Size (psi) (kg) (mm) (mm) WNF) WNF) (mm) Height Height Length Length
A B C C D E F G G
2B-F0344 4 3750 87.09 87 203 400 406 235 185 142 95 102
2B-F0383 4 3750 116.57 97 235 438 457 260 194 155 102 121
2B-G0315 4 6250 104.33 80 225 435 448 241 187 125 105 118
2B-G0363 4 6250 139.71 92 248 470 476 270 198 160 111 118
2B-K0306 4 10000 156.94 78 267 502 514 276 202 162 117 130
2B-F0406 5 3750 132.00 103 229 445 464 270 198 159 108 127
2B-G0406 5 6250 190.51 103 279 521 540 302 215 174 121 127
2B-F0519 6 3750 220.90 132 279 521 546 327 228 187 121 146
2B-G0490 6 6250 347.46 124 330 622 629 371 276 222 146 152
2B-K0406 6 10000 324.78 103 343 635 635 352 266 212 146 146
2B-K0513 6 10000 556.56 130 406 724 737 429 316 249 159 171
2B-F0709 8 3750 425.02 180 362 654 654 410 295 241 146 146
2B-G0709 8 6250 576.52 180 425 756 768 454 329 262 165 165
2B-K0609 8 10000 838.25 155 483 851 864 511 373 291 184 197
2B-K0709 8 10000 1192.96 180 565 1010 1010 578 407 324 222 222
2B-F0909 10 3750 758.87 231 432 775 800 505 355 288 171 197
2B-G0850 10 6250 994.74 216 527 921 946 543 390 307 197 222
2B-G0909 10 6250 1127.19 231 540 959 978 575 403 323 210 229
2B-K0763 10 10000 1514.11 194 616 1086 1086 625 436 348 235 235
2B-F1075 12 3750 1150.32 273 508 927 953 591 415 331 210 235
2B-G1013 12 6250 1466.48 257 584 1041 1067 638 443 355 216 254
2B-G1075 12 6250 1736.37 23 610 1105 1124 667 455 369 248 267
2B-F1140 12 3750 1451.96 290 540 1022 1022 629 430 350 229 241

1 Dimension “F” reflects the standard bonnet provided. Bonnets for close coupling of actuation are available on request. When the close coupling bonnet is provided,
dimension “F” increases 0.250 inches.
2 1B-G0363 & 1B-K0306 are not available with handles for lever operation. Close coupling bonnet is provided as standard dimension “F” shown is for close coupling bonnet.

18 |
 TRUNNION SOFT-SEATED BALL VALVE - (1" - 4")
BALL VALVE KEY

A. Bore
B. Valve Group Length
C. Overall Length (WNF x WNF)
C. Overall Length (SWF x WNF)
D. Body Outer Diameter
E. Handle Height
F. Bonnet Height
G. Weldneck Length
G. Nipple Length

1" THROUGH 4" DIMENSIONS - ENGLISH

Valve Overall Overall
Working Group Length Length Body Outer
Ball Valve Nominal Pressure Weight Bore Length (WNF x (SWF x Diameter Handle Bonnet Weldneck Nipple
Model Number Pipe Size (psi) (lbs) (inch) (inch) WNF) WNF) (inch) Height Height Length Length
A B C C D E F G G
2B-F0344 4 3750 192 3.44 8.25 15.75 16.00 9.25 8.15 5.59 3.75 3.75
2B-F0383 4 3750 257 3.83 9.25 17.25 18.00 10.25 8.56 6.09 4.00 4.50
2B-G0315 4 6250 230 3.15 8.88 17.13 17.63 9.50 8.27 5.72 4.13 4.38
2B-G0363 4 6250 308 3.63 9.75 18.50 18.75 10.63 8.71 6.28 4.38 4.38
2B-K0306 4 10000 346 3.06 10.50 19.75 20.25 10.88 8.79 6.36 4.63 4.63
2B-F0406 5 3750 291 4.06 9.00 17.50 18.25 10.63 8.69 6.26 4.25 5.00
2B-G0406 5 6250 420 4.06 11.00 20.50 21.25 11.88 9.29 6.86 4.75 5.00
2B-F0519 6 3750 487 5.19 11.00 20.50 21.50 12.88 9.79 7.36 4.75 5.75

1" THROUGH 4" DIMENSIONS - METRIC

Valve Overall Overall
Working Group Length Length Body Outer
Ball Valve Nominal Pressure Weight Bore Length (WNF x (SWF x Diameter Handle Bonnet Weldneck Nipple
Model Number Pipe Size (psi) (kg) (mm) (mm) WNF) WNF) (mm) Height Height Length Length
A B C C D E F G G
2B-F0344 4 3750 87.09 87.33 210 400 406 235 207 142 95 95
2B-F0383 4 3750 116.57 97.18 235 438 457 260 217 155 102 114
2B-G0315 4 6250 104.33 80.01 225 435 448 241 210 145 105 111
2B-G0363 4 6250 139.71 92.08 248 470 476 270 221 160 111 111
2B-K0306 4 10000 156.94 77.80 267 502 514 276 223 162 117 117
2B-F0406 5 3750 132.00 103.20 229 445 464 270 221 159 108 127
2B-G0406 5 6250 190.51 103.20 279 521 540 302 236 174 121 127
2B-F0519 6 3750 220.90 131.78 279 521 546 327 249 187 121 146

1 Nipple and weldneck lengths are not necessarily the same. Valves are typically provided with weldneck flanges at both ends. Nipples / swivel flanges may be used at either
end of the valve as an option (except as noted above).
2 Dimension “F” reflects the standard bonnet provided. Bonnets for close coupling of actuation are available on request. Wen the close coupling bonnet is provided, dimension
“F” increases 0.250 inches.

FMC Technologies Inc. / Compact Valves | 19

 TRIM TRUNNION SOFT-SEATED BALL VALVE - TRIM CODES
CODES Trim coding for the new valve is very different from the legacy system. Ball valve trim is a nine-
digit, alphanumeric code that identifies the materials of construction and the type of service,
actuation, grease, and other features. The trim code positions are defined below.

BALL VALVE CODE = 2B-F0344-XXXXXXXXX

MODEL NUMBER – TRIM CODES
XX-XXXXX – 1 2 3 4 5 6 7 8 9
2B-F0344 – X X X X X X X X X

1. BODY, BONNET, AND RETAINER MATERIAL 5. CARRIER AND BODY SEAL MATERIAL
Standard = 1 Standard = 1 or 5
1 4130 Body, Bonnet & Retainer 1 Nitrile
A Duplex Body, Bonnet & Retainer 5 Viton A
B Super Duplex Body, Bonnet & Retainer A James Walker Elast-o-Lion 101
F 410 SS Body, Bonnet & Retainer B James Walker Elast-o-Lion 985
N Inconel 625 Body, Bonnet & Retainer H Greene Tweed 926
P Full Clad 625
Q 4130 / Inconel 625 Partial Clad Body, Bonnet & Retainer
6. STEM SEAL AND BACKUP MATERIAL
Standard = 1 or 2
2. BALL MATERIAL AND COATING 1 Nitrile Jacket / Nitrile O-spring / PEEK Backup
Standard = 3 or 6 2 Viton Jacket / Viton O-spring / PEEK Backup
3 4130 - .003” ENP Standard R Virgin Teflon Jacket / Elgiloy Spring / PEEK Backup
6 17-4PH - .0004” Chrome
7 410 - .0004” Chrome
7. SEAT MATERIAL
D Duplex - .0004” Chrome
Standard = P
H Super Duplex - .0004” Chrome
P PEEK
N Inconel 718 - .0004” Chrome

8. ACTUATION STYLE
3. STEM MATERIAL AND COATING
Standard = 1
Standard = 1
1 Handle or Lever
D Duplex
2 Handle or Lever with Locking Device
1 4130 - QPQ
6 Bare Stem
H Super Duplex
F Gear Operator with Hand wheel
M Inconel 625
G Gear Operator with Hand wheel and Locking Device
N Inconel 718

9. SERVICE, GREASE, AND BONNET BOLTING MATERIAL

4. CARRIER MATERIAL AND COATING
Standard = 1
Standard = 1 or 6
1 Standard Grease, B7M / L7M Bonnet Bolting
1 4130 Alloy
3 Standard Grease, Grade 660 Bonnet Bolting
6 17-4PH
A Low Temperature Grease, B7M / L7M Bonnet Bolting
D Duplex
C Low Temperature Grease, Grade 660 Bonnet Bolting
H Super Duplex
Y Oxygen / Air Service Grease, B7M / L7M Bonnet Bolting
N Inconel 625
Z Oxygen / Air Grease, Grade 660 Bonnet Bolting
R 410 Stainless

1 Nipple and weldneck lengths are not necessarily the same. Valves are typically provided with weldneck flanges at both ends. Nipples / swivel flanges may be used at either
end of the valve as an option (except as noted above)
2 Weights listed are approximate and include the standard weldneck flanges at each end. Pipe schedule, swivel flanges, actuation mounting hardware, etc., may affect the
final assembly weight.
3 For other materials not listed, please consult the factory.

20 |
TRUNNION SOFT-SEATED BALL VALVE

TRUNNION SOFT-SEATED BALL VALVES

ITEM DESCRIPTION QTY ITEM DESCRIPTION QTY
1 Body 1 16 Backup-Ring: For O-Ring Uniform #348 2
2 Ball 1 17 Backup-Ring: For O-Ring Uniform #363 2
3 Stem 1 18 Cap Screw: 12 PT, 5/8 X 1.25 LG 6
4 Seat Assembly 2 19 Set Screw: 5/8 X .63 LG 9
5 Retainer 2 20 Grease Fitting 1
6 Bonnet 1 21 Bleed Fitting 1
7 Bushing: Bonnet 1 22 Stem Seal 1
8 Thrust Ring 1 23 Backup Ring 1
9 Trunnion Support 2 24 Key: 5/16" SQ X 1.37 LG 2
10 Bushing: Trunnion 2 25 Nameplate 1
11 Wave Spring 2 26 Self Tapping Screw 4
12 O-Ring: Uniform #348 2 27 Cap Screw: Hex SOC Head, 5/8 X 1.00 LG 1
13 O-Ring: Uniform #363 2 28 Flat Washer: Type B, 1/2 W 1
14 O-Ring: Uniform #240 2 29 Cap Screw: Hex SOC Head, 1/2 X 1.00 LG 1
15 O-Ring: Uniform #228 1 30 Handle 1

29

28
24 30

18

27 19
14
6 7
17
15
23
11
22
8
4 21
5 3
9
20
13
12
16 10
2

4
26 16

25 19 13
1 10
12 5
9
11

17

14

FMC Technologies Inc. / Compact Valves | 21

 COMPACT CHECK VALVES - (1" - 12")
COMPACT CHECK VALVE KEY

A. Bore
B. Valve Group Length
C. Overall Length (WNF x WNF)
C. Overall Length (SWF x WNF)
D. Body Outer Diameter
E. Handle Height
F. Bonnet Height
G. Weldneck Length
G. Nipple Length

1" THROUGH 12" DIMENSIONS - ENGLISH

Valve Overall Overall
Working Group Length Length Body Outer
Ball Valve Model Nominal Pressure Weight Bore Length (WNF x (SWF x Diameter Weldneck Nipple Tailpiece
Number Pipe Size (psi) (lbs) (inch) (inch) WNF) WNF) (inch) Length Length Length
C-K0081 1 10000 21.38 0.81 2.13 7.13 N/A 5.25 2.13 N/A 2.88
C-G0150 2 6250 44.79 1.50 2.13 9.38 9.81 6.25 3.69 4.13 3.56
C-K0150 2 10000 57.79 1.50 2.13 10.38 11.00 6.56 4.63 5.25 3.63
C-F0209 3 3750 61.43 2.09 2.38 10.50 10.63 6.88 4.38 4.50 3.75
C-F0263 3 3750 69.34 2.63 2.25 10.13 10.50 7.88 3.38 3.75 4.50
C-G0230 3 6250 86.90 2.30 2.50 11.13 11.63 7.88 4.38 4.88 4.25
C-G0259 3 6250 96.00 2.59 2.50 11.50 12.38 8.38 4.25 5.13 4.75
C-K0213 3 10000 96.86 2.13 2.88 11.13 11.88 8.63 3.75 4.13 4.88
C-F0344 4 3750 113.48 3.44 2.50 11.63 11.88 9.25 3.75 4.00 5.38
C-F0383 4 3750 173.70 3.83 3.13 14.00 14.63 11.00 4.00 4.63 6.88
C-G0315 4 6250 156.71 3.15 3.25 13.00 13.50 10.13 4.13 4.63 5.63
C-G0363 4 6250 236.72 3.63 3.25 14.88 15.50 12.25 4.13 4.75 7.50
C-K0306 4 10000 189.22 3.06 3.50 13.63 14.38 10.38 4.63 5.13 5.75
C-F0406 5 3750 181.54 4.06 3.25 13.50 14.50 11.00 4.00 5.00 6.25
C-G0406 5 6250 265.68 4.06 3.75 15.00 15.75 12.25 4.25 5.00 7.00
C-F0519 6 3750 338.80 5.19 3.75 16.25 17.25 13.50 4.75 5.75 7.75
C-G0490 6 6250 457.48 4.90 3.75 18.00 18.00 14.75 5.75 5.75 8.50
C-K0406 6 10000 527.93 4.06 5.00 19.25 19.25 15.38 5.75 5.75 8.50
C-K0513 6 10000 624.53 5.13 5.00 20.50 20.50 15.88 6.50 6.50 9.00
C-F0709 8 3750 583.52 7.09 4.25 18.75 18.75 17.00 5.75 5.75 8.75
C-G0709 8 6250 832.20 7.09 4.75 22.00 N/A 18.63 7.25 N/A 10.00
C-K0609 8 10000 913.54 6.09 5.75 24.00 N/A 17.75 8.75 N/A 9.50
C-K0709 8 10000 1434.36 7.09 7.25 28.50 N/A 20.00 8.50 N/A 12.75
C-F0909 10 3750 1252.15 9.09 5.75 25.00 N/A 21.50 6.75 N/A 12.50
C-G0850 10 6250 1538.77 8.50 5.75 28.25 N/A 22.00 8.25 N/A 14.25
C-G0909 10 6250 1589.36 9.09 5.75 28.25 N/A 22.00 8.25 N/A 14.25
C-K0763 10 10000 1509.84 7.63 7.25 29.50 N/A 20.00 10.25 N/A 12.00
C-F1075 12 3750 1657.89 10.75 5.75 29.00 N/A 22.88 9.00 N/A 14.25
C-G1013 12 6250 2245.85 10.13 7.50 33.00 N/A 23.88 9.50 N/A 16.25
C-G1075 12 6250 2423.48 10.75 7.75 35.50 N/A 24.50 10.50 N/A 17.25
C-F1140 12 3750 1816.51 11.40 6.25 33.25 N/A 23.88 11.00 N/A 16.00

1 Nipple and weldneck lengths are not necessarily the same. Valves are typically provided with weldneck flanges at the upstream end. Nipples / swivel flanges may be used at
the upstream end of the valve as an option (except as noted above). Tailpieces are always required at the downstream end.
2 Weights listed are approximate and include the standard weldneck flanges at the upstream end and a tailpiece t the downstream end. Pipe schedule, swivel flanges, etc.,
may affect the final assembly weight.

22 |
 COMPACT CHECK VALVES - (1" - 12")
COMPACT CHECK VALVE KEY

A. Bore
B. Valve Group Length
C. Overall Length (WNF x WNF)
C. Overall Length (SWF x WNF)
D. Body Outer Diameter
E. Handle Height
F. Bonnet Height
G. Weldneck Length
G. Nipple Length

1" THROUGH 12" DIMENSIONS - METRIC

Valve Overall Overall
Working Group Length Length Body Outer
Ball Valve Model Nominal Pressure Weight Bore Length (WNF x (SWF x Diameter Weldneck Nipple Tailpiece
Number Pipe Size (psi) (kg) (mm) (mm) WNF) WNF) (mm) Length Length Length
C-K0081 1 10000 9.70 21 54 181 N/A 133 54 N/A 73
C-G0150 2 6250 20.32 38 54 238 249 159 94 105 90
C-K0150 2 10000 26.21 38 54 264 279 167 117 133 92
C-F0209 3 3750 27.86 53 60 267 270 175 222 114 95
C-F0263 3 3750 31.45 67 57 257 267 200 86 95 114
C-G0230 3 6250 39.42 58 64 283 295 200 111 124 108
C-G0259 3 6250 43.55 66 64 292 314 213 108 130 121
C-K0213 3 10000 43.94 54 73 283 302 219 95 105 124
C-F0344 4 3750 51.47 87 64 295 302 235 95 102 137
C-F0383 4 3750 78.79 97 79 356 372 279 102 118 175
C-G0315 4 6250 71.08 80 83 330 343 257 105 118 143
C-G0363 4 6250 107.38 92 83 378 394 311 105 121 191
C-K0306 4 10000 85.83 78 89 346 365 264 117 130 146
C-F0406 5 3750 82.35 103 83 343 368 279 102 127 159
C-G0406 5 6250 120.51 103 95 381 400 311 108 127 178
C-F0519 6 3750 153.68 132 95 413 438 343 121 146 197
C-G0490 6 6250 207.51 124 95 457 457 375 146 146 216
C-K0406 6 10000 239.47 103 127 489 489 391 146 146 216
C-K0513 6 10000 283.28 130 127 521 521 403 165 165 229
C-F0709 8 3750 264.68 180 108 476 476 432 146 146 222
C-G0709 8 6250 377.48 180 121 559 N/A 473 184 N/A 254
C-K0609 8 10000 414.38 155 146 610 N/A 451 222 N/A 241
C-K0709 8 10000 650.62 180 184 724 N/A 508 216 N/A 324
C-F0909 10 3750 567.97 231 146 635 N/A 546 171 N/A 318
C-G0850 10 6250 697.98 116 146 718 N/A 559 210 N/A 362
C-G0909 10 6250 720.93 231 146 718 N/A 559 210 N/A 362
C-K0763 10 10000 684.86 194 184 749 N/A 508 260 N/A 305
C-F1075 12 3750 752.01 273 146 737 N/A 581 229 N/A 362
C-G1013 12 6250 1018.71 257 191 838 N/A 606 241 N/A 413
C-G1075 12 6250 1099.28 273 197 902 N/A 622 267 N/A 438
C-F1140 12 3750 823.96 290 159 845 N/A 606 279 N/A 406

1 The following valve models are available with thru-hole bodies for close coupling of the check valve to connectors or other valves. [C-G0150, C-K0150, C-F0209, C-F0263,
C-G0230, C-G0259]

FMC Technologies Inc. / Compact Valves | 23

 TRIM COMPACT CHECK VALVE - TRIM CODES
CODES Trim coding for the new valve is very different from the legacy system. Ball valve trim is a nine-
digit, alphanumeric code that identifies the materials of construction and the type of service,
actuation, grease, and other features. The trim code positions are defined below.

COMPACT CHECK VALVE CODE = C-K0081-XXXX

MODEL NUMBER – TRIM CODES
XX-XXXXX – 1 2 3 4
C-K0081 – X X X X

1. BODY, MATERIAL & COATING

Standard = 1
1 4130 Alloy
2 4130 Alloy - Xylan Internal
A Duplex
B Super Duplex
F 410 Stainless
N Inconel 625
P 4130 Alloy - Inconel 625 Fully Clad
Q 4130 Alloy - Inconel 625 Partially Clad

2. SEAT MATERIAL AND COATING

Standard = 2
2 17-4 PH
A 4130 Alloy
D Duplex
E Super Duplex
G Inconel 625

3. FLAPPER MATERIAL AND COATING

Standard = 2
2 4130 Alloy
A 4130 Alloy - Xylan Internal
D Duplex
E Super Duplex

4. BODY SEAL MATERIALS

Standard = 2
1 Nitrile
3 Viton A
A James Walker Elast-o-Lion 101
B James Walker Elast-o-Lion 985
H Greene Twed 926
H Super Duplex
N Inconel 625
R 410 Stainless

24 |
COMPACT CHECK VALVES - (1" - 12")

COMPACT CHECK VALVES

ITEM DESCRIPTION QTY
1 BODY 1
2 SEAT 1
3 FLAPPER 1
4 FLAPPER SHOE 1
5 PIVOT PIN 1
6 SPRING 1
7 O-RING 1
8 O-RING 1
9 O-RING 1
10 SEAT SEAL RING 1
11 SET SCREW: *8 X .375 LG 2
12 NAMEPLATE 1
13 SELF TAPPING SCREW 2

13
7

4
12
11
5

2
10
3

FMC Technologies Inc. / Compact Valves | 25

 POPPET DIVERTER VALVE
POPPET DIVERTER VALVE KEY

A Seat Dia. Production

B Equiv. Seat Dia. Test
C Offset Test Outlet
D Weld End Test
E Weld End Inlet
F Weld End Production
G Body Width
H Body Below Inlet
J Body Above Inlet
K Bonnet flg. Height
L Cylinder Above Inlet
M Spring Hsg. Height
N Cylinder Height
P Nipple O.D. (max)
OD Cylinder O.D.

POPPET DIVERTER VALVE DIMENSIONS

Nominal Working Pressure Nominal Size Valve Port Diameter Weight With End Fittings
psi (bar) inches (mm) Model inches (mm) lbs (kg)
2 (50) D1860 17⁄8 (47) 125 (56)
3 (75) D2536 21⁄2 (63) 172 (78)
3705 (250)
4 (100) D3536 31⁄2 (88) 380 (172)
8 (200) D7136
2 (50) D1860 17⁄8 (47) 125 (56)
3 (75) D2560 21⁄2 (63) 260 (117)
6170 (420) 4 (100) D3560 31⁄2 (88) 535 (242)
6 (150) D5060 5 (127) 1155 (523)
8 (200) D6860

POPPET DIVERTER VALVE SPECIFICATIONS

TYPE A B C D E F G H J K L M N P OD

17⁄8 11⁄2 51⁄2 83⁄4 71⁄4 81⁄4 4 31⁄2 71⁄2 61⁄2 29 63⁄4 81⁄4 27⁄8 71⁄4
D1860
(47) (38) (139) (209) (184) (222) (101) (88) (190) (165) (736) (171) (209) (73) (184)

21⁄2 21⁄16 61⁄2 8 8 10 41⁄2 41⁄2 103⁄4 61⁄4 36 81⁄2 10 31⁄2 81⁄2
D2536
(63) (52) (165) (203) (203) (254) (114) (107) (273) (171) (914) (215) (254) (88) (215)

31⁄2 33⁄8 51⁄2 103⁄4 101⁄3 111⁄2 71⁄2 5 101⁄2 5 34 81⁄2 10 5 81⁄2
D3536
(88) (79) (139) (260) (260) (292) (190) (127) (266) (127) (863) (215) (254) (127) (215)

17⁄8 11⁄2 51⁄2 81⁄4 71⁄4 83⁄4 4 31⁄2 71⁄2 61⁄2 29 63⁄4 81⁄4 27⁄8 71⁄4
D1860
(47) (38) (139) (209) (184) (222) (101) (88) (190) (165) (736) (171) (209) (73) (184

21⁄2 21⁄16 61⁄2 83⁄4 81⁄4 10 6 41⁄4 103⁄4 63⁄4 36 81⁄2 10 31⁄4 81⁄2
D2560
(63) (165) (165) (222) (222) (266) (152) (107) (273) (171) (914) (215) (254) (951) (2150

31⁄2 3 9 101⁄2 101⁄2 111⁄2 8 5 14 63⁄4 431⁄4 113⁄4 111⁄4 5 91⁄4

D3560
(88) (76) (288) (266) (266) (292) (203) (127) (355) (171) (1111) (298) (285) (127) (247)

5 4 12 12 12 131⁄4 11 71⁄4 191⁄4 91⁄4 531⁄2 111⁄2 131⁄2 71⁄2 113⁄4

D5060
(127) (101) (304) (304) (304) (349) (279) (184) (488) (234) (1358) (292) (342) (190) (298)

1 Consult factory for trim codes.

26 |
 THROTTLE VALVE
BALL VALVE KEY

A. Max Orifice
B. Valve Group Length
C. Overall Length (WNF x WNF)
C. Overall Length (SWF x WNF)
D. Body Outer Diameter
E. Handle Height
F. Bonnet Height
G. Weldneck Length
G. Nipple Length

1" THROUGH 4" DIMENSIONS - ENGLISH / (METRIC)

Valve Overall Overall
Ball Valve Working Max Group Length Length Body Outer
Model Nominal Pressure Weight Orifice Length (WNF x (SWF x Diameter Handle Bonnet Weldneck Nipple
Number Pipe Size (psi) (kg) (mm) (mm) WNF) WNF) (mm) Height Height Length Length
A B C C D E F G G
26 5⁄16 4.00 8.25 N/A 4.50 4.28 2.25 2.13
1B-K0081 1 10000 N/A
(11.79) (8) (102) (210) (111) (109) (57) (54)
70 4.88 12.25 12.69 6.50 5.16 3.13 3.69 4.13
1B-G0150 2 6250
(31.75) 5⁄8 (124) (311) (322) (165) (131) (80) (94) (105)
99 (16) 6.00 15.25 15.88 7.00 5.38 3.28 4.63 5.25
1B-K0150 2 10000
(44.91) (152) (387) (403) (178) (137) (83) (117) (133)
95 5.38 14.13 14.25 7.13 5.45 3.44 4.38 4.50
1B-F0209 3 3750
(43.09) 1 1⁄4 (137) (359) (362) (181) (138) (87) (111) (114)
151 (32) 6.88 15.63 16.13 7.88 7.33 4.91 4.38 4.88
1B-G0230 * 3 6250
(68.49) (175) (397) (410) (200) (186) (125) (111) (124)
196 7.75 15.25 15.50 9.25 7.98 5.54 3.75 4.00
1B-F0344 * 4 3750
(88.91) 1 7⁄8 (197) (387) (394) (235) (203) (141) (95) (102)
230 (48) 8.38 16.63 17.13 9.50 8.72 5.66 4.13 4.63
1B-G0315 * 4 6250
(104.33) (213) (422) (435) (241) (221) (144) (105) (118)

1" THROUGH 12" DIMENSIONS - (METRIC)

Valve Model Nominal Pressure PSI Flowrate B/D (M3/D) at percent open dial readings
Number Size (mm) (bar) 20% 40% 60% 80% 100%
250 (17) 390 (62) 760 (121) 1,170 (186) 1,450 (231) 1,600 (254)
500 (34) 550 (87) 1,100 (175) 1,680 (267) 2,060 (328) 2,250 (358)
1 1,000 (69) 790 (126) 1,560 (248) 2,400 (382) 2,950 (469) 3,200 (509)
1B-K0081
(25) 1,500 (103) 960 (153) 1,930 (307) 2,950 (469) 3,640 (579) 3,950 (628)
2,000 (138) 1,120 (178) 2,200 (350) 3,400 (541) 4,200 (668) 4,600 (731)
2,500 (172) 1,250 (199) 2,500 (397) 3,800 (604) 4,700 (747) 5,200 (827)
250 (17) 980 (156) 2,170 (345) 3,520 (560) 4,510 (717) 5,000 (795)
500 (34) 1,400 (223) 3,100 (493) 5,000 (795) 6,400 (1,018) 7,100 (1,129)
1B-G0150 2 1,000 (69) 2,000 (318) 4,400 (700) 7,200 (1,145) 9,100 (1,447) 10,200 (1,622)
1B-K0150 (50) 1,500 (103) 2,450 (390) 5,400 (859) 8,800 (1,399) 11,200 (1,781) 12,500 (1,987)
2,000 (138) 2,850 (453) 6,220 (989) 10,200 (1,622) 13,000 (2,067) 14,400 (2,289)
2,500 (172) 3,200 (509) 6,950 (1,105) 11,400 (1,812) 14,600 (2,321) 16,100 (2,560)
250 (17) 3,650 (580) 7,300 (1,161) 11,200 (1,781) 14,900 (2,369) 16,700 (2,655)
500 (34) 5,200 (827) 10,400 (1,653) 15,700 (2,496) 21,000 (3,339) 23,700 (3,768)
1B-F0209 3 1,000 (69) 7,400 (1,177) 14,800 (2,353) 22,500 (3,577) 30,000 (4,770) 33,700 (5,358)
1B-G0230 (75) 1,500 (103) 9,100 (1,447) 18,200 (2,894) 27,500 (4,372) 36,500 (5,803) 41,500 (6,598)
2,000 (138) 10,500 (1,669) 21,000 (3,339) 31,800 (5,056) 42,000 (6,677) 47,000 (7,472)
2,500 (172) 11,800 (1,876) 23,500 (3,736) 35,600 (5,660) 47,000 (7,472) 52,500 (8,347)
250 (17) 8,500 (1,351) 17,000 (2,703) 26,100 (4,150) 34,700 (5,517) 38,900 (6,185)
500 (34) 12,100 (1,924) 24,200 (3,848) 36,600 (5,819) 48,900 (7,775) 55,200 (8,776)
1B-F0344 4 1,000 (69) 17,200 (2,735) 34,500 (5,485) 52,400 (8,331) 69,900 (11,130) 78,500 (12,481)
1B-G0315 (100) 1,500 (103) 21,200 (3,371) 42,400 (6,741) 64,100 (10,191) 85,000 (13,514) 95,500 (15,184)
2,000 (138) 24,500 (3,895) 48,900 (7,775) 74,100 (11,781) 97,900 (15,565) 109,500 (17,409)
2,500 (172) 27,500 (4,372) 54,800 (8,713) 82,900 (13,180) 109,500 (17,409) 122,300 (19,445)
1 This table is useful in determining which throttle ball valve is appropriate for your application.
2 Maximum pressure differential is 2,500 psi.
3 Size flowrate for minimum 20% opening.
4 Reduced orifices are available for special applications.
5 Dimensions are the same as soft seated floating ball valve. (1B-Series)
FMC Technologies Inc. / Compact Valves | 27
 COMMON END CONNECTIONS
Weldneck Flange and Swivel Flange Set

FLANGE
DATA
SWIVEL FLANGE SET WELDNECK FLANGE THREADED FLANGE

CHECK VALVE FLANGE DATA

Upstream Upstream
Weldneck Upstream Swivel Upstream
Ball Valve Working Pressure Nominal Flange Blind Flange Flange Upstream Half Ring Tailpiece
Model Number (PSI) Pipe Size Name Name Name Nipple Name Name Number
C-K0081 10000 1 01A 01A 01A N/A N/A C-K0081
C-G0150 6250 2 02A 02A 02A R02A0150 R02A C-G0150
C-K0150 10000 2 02B 02B 02B R02B0150 R02B C-K0150
C-F0209 3750 3 03A 03A 03A R03A0209 R03A C-F0209
C-F0263 3750 3 03D 03D 03D R03D0263 R03D C-F0263
C-G0230 6250 3 03B 03B 03B R03B0230 R03B C-G0230
C-G0259 6250 3 03C 03C 03C R03C0259 R03C C-G0259
C-K0213 10000 3 03E 03E 03E R03E0213 R03E C-K0213
C-F0344 3750 4 04A 04A 04A R04A0344 R04A C-F0344
C-F0383 3750 4 04C 04C 04C R04C0383 R04C C-F0383
C-G0315 6250 4 04B 04B 04B R04B0315 R04B C-G0315
C-G0363 6250 4 04D 04D 04D R04D0363 R04D C-G0363
C-K0306 10000 4 04E 04E 04E R04E0306 R04E C-K0306
C-F0406 3750 5 05A 05A 05A R05A0406 R05A C-F0406
C-G0406 6250 5 05B 05B 05B R05B0406 R05B C-G0406
C-F0519 3750 6 06B 06B 06B R06B0519 R06B C-F0519
C-G0490 6250 6 06D 06D 06D R06D0490 R06D C-G0490
C-K0406 10000 6 06E 06E 06E R06E0406 R06E C-K0406
C-K0513 10000 6 06F 06F 06F R06F0513 R06F C-K0513
C-F0709 3750 8 08A 08A 08A R08A0709 R08A C-F0709
C-G0709 6250 8 08B 08B 08B N/A N/A C-G0709
C-K0609 10000 8 08C 08C 08C N/A N/A C-K0609
C-K0709 10000 8 08D 08D 08D N/A N/A C-K0709
C-F0909 3750 10 10C 10C 10C N/A N/A C-F0909
C-G0850 6250 10 10B 10B 10B N/A N/A C-G0850
C-G0909 6250 10 10A 10A 10A N/A N/A C-G0909
C-K0763 10000 10 10D 10D 10D N/A N/A C-K0763
C-F1075 3750 12 12A 12A 12A N/A N/A C-F1075
C-G1013 6250 12 12C 12C 12C N/A N/A C-G1013
C-G1075 6250 12 12B 12B 12B N/A N/A C-G1075
C-F1140 3750 12 12G 12G 12G N/A N/A C-F1140

28 |
SOFT-SEATED FLOATING BALL VALVE FLANGE DATA
Ball Valve Working Pressure Nominal Pipe Weldneck Blind Flange Swivel Flange Half Ring
Model Number (PSI) Size Flange Name Name Name Nipple Name Name
1BK0081 10000 1 01A 01A 01A N/A N/A
1B-G0150 6250 2 02A 02A 02A R02A0150 R02A
1B-K0150 10000 2 02B 02B 02B R02B0150 R02B
1B-F0209 3750 3 03A 03A 03A R03A0209 R03A
1B-F0263 3750 3 03D 03D 03D R03D0263 R03D
1B-G0230 6250 3 03B 03B 03B R03B0230 R03B
1B-G0259 6250 3 03C 03C 03C R03C0259 R03C
1B-K0213 10000 3 03E 03E 03E R03E0213 R03E
1B-F0344 3750 4 04A 04A 04A R04A0344 R04A
1B-F0383 3750 4 04C 04C 04C R04C0383 R04C
1B-G0315 6250 4 04B 04B 04B R04B0315 R04B
1B-G0363 6250 4 04D 04D 04D R04D0363 R04D
1B-K0306 10000 4 04E 04E 04E R04E0306 R04E

POPPET DIVERTER FLANGE DATA

Swivel Flange Ends Blind Flange Ends
Check Valve Working Pressure
Model Number (PSI) Nominal Pipe Size Inlet Connection Outlet Connection Inlet Connection Outlet Connection
D1860 6170 2 16D 16D 16 16
D2536 3705 3 24J 24J 24 24
D2560 6170 3 30K 30K 30 30
D3536 3705 4 42N 42N 42 42
D3560 6170 4 42N 42N 42 42
D5060 6170 6 62R 62R 62 62

TOP ENTRY FLANGE DATA

Ball Valve Working Pressure Nominal Pipe Weldneck Blind Flange Swivel Flange Half Ring
Model Number (PSI) Size Flange Name Name Name Nipple Name Name
8B-G0150 6250 2 02A 02A 02A R02A0150 R02A
8B-G0259 6250 3 03C 03C 03C R03C0259 R03C
8B-G0315 6250 4 04H 04H 04H R04H0315 R04H
8B-G0490 6250 6 06D 06D 06D R06D0490 R06D
8B-G0709 6250 8 08E 08E 08E R08E0709 R08E
8B-G0850 6250 10 10F 10F 10F R10F0850 R10F
8B-G1013 6250 12 12E 12E 12E R12E1013 R12E
8B-K0150 10000 2 02B 02B 02B R02B0150 R02B
8B-K0213 10000 3 03E 03E 03E R03E0213 R03E
8B-K0306 10000 4 04E 04E 04E R04E0306 R04E
8B-K0513 10000 6 06F 06F 06F R06F0513 R06F
8B-K0709 10000 8 08G 08G 08G R08G0709 R08G
8B-K0763 10000 10 10H 10H 10H R10H0763 R10H

FMC Technologies Inc. / Compact Valves | 29

 COMMON END CONNECTIONS
Weldneck Flange and Swivel Flange Set

FLANGE
DATA
SWIVEL FLANGE SET WELDNECK FLANGE THREADED FLANGE

TRUNNION SOFT-SEATED BALL VALVE FLANGE DATA

Ball Valve Working Pressure Nominal Pipe Weldneck Blind Flange Swivel Flange Half Ring
Model Number (PSI) Size Flange Name Name Name Nipple Name Name
2B-F0344 3750 4 04A 04A 04A R04A0344 R04A
2B-F0383 3750 4 04G 04G 04G R04G0383 R04G
2B-G0315 6250 4 04H 04H 04H R04H0315 R04H
2B-G0363 6250 4 04J 04J 04J R04J0363 R04J
2B-K0306 10000 4 04E 04E 04E R04E0306 R04E
2B-F0406 3750 5 05B 05B 05B R05B0406 R05B
2B-G0406 6250 5 05C 05C 05C R05C0406 R05C
2B-F0519 3750 6 06B 06B 06B R06B0519 R06B
2B-G0490 6250 6 06D 06D 06D R06D0490 R06D
2B-K0406 10000 6 06E 06E 06E R06E0406 R06E
2B-K0513 10000 6 06F 06F 06F R06F0513 R06F
2B-F0709 3750 8 08A 08A 08A R08A0709 R08A
2B-G0709 6250 8 08E 08E 08E R08E0709 R08E
2B-K0609 10000 8 08F 08F 08F R08F0609 R08F
2B-K0709 10000 8 08G 08G 08G R08G0709 R08G
2B-F0909 3750 10 10E 10E 10E R10E0909 R10E
2B-G0850 6250 10 10F 10F 10F R10F0850 R10F
2B-G0909 6250 10 10G 10G 10G R10G0909 R10G
2B-K0763 10000 10 10H 10H 10H R10H0763 R10H
2B-F1075 3750 12 12D 12D 12D R12D1075 R12D
2B-G1013 6250 12 12E 12E 12E R12E1013 R12E
2B-G1075 6250 12 12F 12F 12F R12F1075 R12F
2B-F1140 3750 12 12H 12H 12H R12H1140 R12H

30 |
We put you first.
And keep you ahead.
FMC Technologies, Inc.
FMC Fluid Control

Alice, Texas Farmington, New Mexico FMC International Service Centers

Phone: 361-668-0886 Phone: 505-592-2769
Sumner Park, Australia
Fax: 361-668-0905 Fax: 505-327-0641
Phone: +61-448-157-696
Bryan, Texas Williston, North Dakota
Macae, Brazil
Phone: 979-778-1570 Phone: 701-572-5021
Fax: 979-778-1572 Fax: 701-572-5024 Phone: +55-22-2773-0735

Longview, Texas Oklahoma City, Oklahoma Villavicencio, Colombia

Phone: 903-757-4180 Phone: 405-787-6301 /6304 /6309 Phone: +57-1-635-1470
Fax: 903-757-2514 Fax: 405-787-6090
Jakarta, Indonesia
Odessa, Texas Blairsville, Pennsylvania Phone: +62-21440-4151
Fax: +62-21440-4050
Phone: 432-561-8063 Phone: 724-459-7350
Fax: 432-552-9151 Fax: 724-459-5459 Poza Rica, Mexico
Stephenville, Texas Muncy, Pennsylvania Phone: +52-782-823-8720
Phone: 254-968-2181 Phone: 570-546-2441 Reynosa, Mexico
Fax: 254-968-5709 Fax: 570-546-2457
Phone: +52-899-926-3289
Weatherford, Texas Vernal, Utah
Villahermosa, Tabasco, Mexico
Phone: 817-599-5553 Phone: 435-781-1790
Phone: +52-993-310-4870
Fax: 817-599-3337 Fax: 435-781-2693
Fax: +52-993-310-4879
DeadHorse, Alaska Rock Springs, Wyoming Aberdeen, Scotland
Phone: 907-598-4083 Phone: 307-382-4244 Phone: +44-1224-898-555
Fax: 307-382-4454 Fax: +44-1224-249-460
Bakersfield, California
Phone: 661-303-7268 Singapore
Fax: 661-283-1076 Phone: +65/6668-3600
Fax: +65/6-3162605
Brighton, Colorado
Phone: 303-655-7421
Fax: 303-655-8429

Grand Junction, Colorado

Phone: 970-245-1553 /1563 /1557
Fax: 970-245-6066

Broussard, Louisiana
Phone: 337-837-0700
Fax: 337-839-2235

Bossier City, Louisiana

Phone: 318-752-2312 / 2973
Fax: 318-549-9540

FMC Technologies Inc. / Compact Valves | 31

Corporate

FMC Technologies, Inc.

5875 N. Sam Houston Pkwy. W.
Houston, Texas 77086
P: +1 281.591.4000

Regional

FMC Technologies, Inc.

1 Subsea Lane
Houston, Texas 77044
P: +1 281.591.4000

Stephenville
2825 W. Washington
Stephenville, TX 76401
P: +1 254.968.2181

www.fmctechnologies.com

© 2016 FMC Technologies. All rights reserved.