Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    Notes: Top View

    Uploaded by

    babakfun2000
    The document provides details for a structural steel moment connection using a flush end plate. It includes dimensions and notes for a connection between a HEA 200 beam and column. Key details include a 10mm thick stiffener plate on the top and bottom of the beam end, high strength friction grip bolts spaced at 50mm, 100mm, and 50mm, and fillet welds between the beam and plate with a minimum size of 0.7 times the smallest element thickness. Design and materials shall follow AISC and DIN standards respectively.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Notes: Top View

    Uploaded by

    babakfun2000
    24 views1 page
    The document provides details for a structural steel moment connection using a flush end plate. It includes dimensions and notes for a connection between a HEA 200 beam and column. Key details include a 10mm thick stiffener plate on the top and bottom of the beam end, high strength friction grip bolts spaced at 50mm, 100mm, and 50mm, and fillet welds between the beam and plate with a minimum size of 0.7 times the smallest element thickness. Design and materials shall follow AISC and DIN standards respectively.

    Original Title

    d-ce150

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides details for a structural steel moment connection using a flush end plate. It includes dimensions and notes for a connection between a HEA 200 beam and column. Key details include a 10mm thick stiffener plate on the top and bottom of the beam end, high strength friction grip bolts spaced at 50mm, 100mm, and 50mm, and fillet welds between the beam and plate with a minimum size of 0.7 times the smallest element thickness. Design and materials shall follow AISC and DIN standards respectively.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views1 page

    Notes: Top View

    Uploaded by

    babakfun2000
    The document provides details for a structural steel moment connection using a flush end plate. It includes dimensions and notes for a connection between a HEA 200 beam and column. Key details include a 10mm thick stiffener plate on the top and bottom of the beam end, high strength friction grip bolts spaced at 50mm, 100mm, and 50mm, and fillet welds between the beam and plate with a minimum size of 0.7 times the smallest element thickness. Design and materials shall follow AISC and DIN standards respectively.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    10 THK. STIF.

    HEA 200 T NOTES


    TOP AND BOTT.
    " 1 -ALL DIMENSIONS ARE IN MILLIMETERS.
    "S
    =
    7T 2 -ALL WELDS SHALL BE DONE AT SHOP.
    0.
    L BEAM
    C 3 -HIGH STRENGTH FRICTION TYPE BOLTS SHALL
    COLUMN BE IN ACCORDANCE WITH ASTM A325 TYPE 1
    (SEE NOTE No.9) OR EQUIVALENT APPROVED BY AUTHORIZED
    REPRESENTATIVE OF OWNER.
    4 -NUTS AND WASHERS SPECIFICATION FOR
    SEE NOTE 5 ASTM A325 BOLT SHALL BE ASTM A563 DH
    AND ASTM F436 RESPECTIVELY.
    TOP VIEW
    200 5 -COLUMN FLANGE WIDTH>BEAM FLANGE WIDTH.

    6 -BEARING TYPE JOINTS SHALL NOT BE USED.


    50 100 50
    7 -WELDS SHALL BE AS PER AWS D1.1
    TYP. A HEA 200
    8 -STRUCTURAL MATERIAL SHALL BE DIN ST 37

    1
    OR EQUIVALENT.
    9 -DIMENSION "S" OF NON DIMENSIONED FILLET
    WELDS SHALL BE AT LEAST EQUAL TO 0.7
    5 COLUMN TIMES THE MINIMUM THICKNESS OF THE

    60 55
    10 190 SMALLEST ELEMENTS TO BE CONNECTED.
    10 -DESIGN PROCEDURES TO BE IN ACCORDANCE
    2 4
    HEA 200
    /22 HOLES FOR
    8O WITH AISC MANUAL AND MATERIALS TO BE
    M20 BOLTS IN ACCORDANCE WITH DIN STANDARDS.
    380

    130
    .

    400
    P
    L . 20 THK.

    60
    6

    75
    3
    20
    20 THK. HAUNCH CUT
    FROM BEAM
    END P
    L. SECTION COL.VARIES
    A

    ELEVATION SECTION A-A


    C
    B
    A
    REV. DESCRIPTION DATE
    2
    IRANIAN PETROLEUM STANDARDS
    45 45

    NO REVISION PERMITTED UNLESS APPROVED BY STANDARD ORGANIZATION

    45
    2
    STRUCTURAL STEEL CONNECTIONS
    2

    MOMENT CONNECTION
    2
    2

    FLUSH END PLATE FOR HEA 200 BEAM


    DETAIL1 DETAIL2 DETAIL3 DETAIL4 DETAIL5 DETAIL6 DATE DRAWING No. SHEET REV.
    1
    IPS-D-CE-150 1

    You might also like