Self-Propelled Articulating Booms

™ ™
Z -30/20N & Z -30/20N RJ
Specifications
Models Z-30/20N Z-30/20N RJ Range Of Motion Z-30/20N
Measurements US Metric US Metric 40 ft
12.19 m

Working height maximum* 36 ft 11.14 m 35 ft 2 in 10.89 m

35 ft
Platform height maximum 30 ft 9.14 m 29 ft 2 in 8.89 m 10.67 m

Horizontal reach maximum 21 ft 5 in 6.53 m 20 ft 6 in 6.25 m

Up and over clearance maximum 12 ft 8 in 3.86 m 12 ft 8 in 3.86 m 30 ft
9.14 m
A Platform length 2 ft 6 in 0.76 m 2 ft 6 in 0.76 m
B Platform width 3 ft 10 in 1.17 m 3 ft 10 in 1.17 m 25 ft
7.62 m
C Height - stowed 6 ft 6.5 in 2m 6 ft 6.5 in 2m
D Length - stowed 16 ft 9 in 5.11 m 17 ft 5 in 5.31 m
20 ft
E Storage height 6 ft 10 in 2.08 m 7 ft 4 in 2.24 m 6.10 m

F Storage length 11 ft 6 in 3.5 m 12 ft 3.66 m

G Width 3 ft 11 in 1.19 m 3 ft 11 in 1.19 m 15 ft
4.57 m
H Wheelbase 5 ft 3 in 1.60 m 5 ft 3 in 1.60 m
I Ground clearance - center 3.5 in 0.09 m 3.5 in 0.09 m 10 ft
3.05 m

Productivity
5 ft
Lift capacity 500 lbs 227 kg 500 lbs 227 kg 1.52 m

Platform rotation 180° 180°

Vertical jib rotation 139° 139° 0 ft
0m
-5 ft 0 ft 5 ft 10 ft 15 ft 20 ft 25 ft
Horizontal jib rotation –––––– 180° 1 2 0 1 2 30 4 6 10 62
Turntable rotation 355° non-continuous 355° non-continuous
Range Of Motion Z-30/20N RJ
Turntable tailswing zero zero
Drive speed - stowed 3.0 mph 4.8 km/h 3.0 mph 4.8 km/h 40 ft
12.19 m
Drive speed - raised** 0.68 mph 1.1 km/h 0.68 mph 1.1 km/h
Gradeability - stowed*** 35% 35% 35 ft
10.67 m
Turning radius - inside 5 ft 5 in 1.65 m 5 ft 5 in 1.65 m
Turning radius - outside 10 ft 7 in 3.23 m 10 ft 7 in 3.23 m 30 ft
9.14 m
Controls 24 V DC proportional 24 V DC proportional
Tires - solid non-marking 22x7x17.75 in .56x.18x.45 m 22x7x17.75 in .56x.18x.45 m
25 ft
7.62 m

Power
20 ft
Power source 48 V DC (eight 6 V batteries 48 V DC (eight 6 V batteries 6.10 m

390 Ah capacity) 390 Ah capacity)

Auxiliary power unit 24 V DC 24 V DC 15 ft
4.57 m
Hydraulic tank capacity 4 gal 15.1 L 4 gal 15.1 L
10 ft
3.05 m
Weight****
14,170 lbs 6,427 kg 14,220 lbs 6,450 kg 5 ft
1.52 m

Standards Compliance ANSI A92.5, CSA B354.4, EN 280, AS 1418.10

0 ft
0m
A A -5 ft 0 ft 5 ft 10 ft 15 ft 20 ft 25 ft
-1.52 m 0m 1.52 m 3.05 m 4.57 m 6.10 m 7.62 m

G B G B
10 ft
3.05 m
D D
F F
5 ft
1.52 m

C E C E 0 ft
0m

I I
H H 5 ft
1.52 m

* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** In lift mode *(platform raised), the machine is designed to operated on firm, level surfaces only.
10 ft
*** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings. 3.05 m
**** Weight will vary depending on options and/or country standards. -5 ft 0 ft 5 ft 10 ft 15 ft 20 ft 25 ft
-1.52 m 0m 1.52 m 3.05 m 4.57 m 6.09 m 7.62 m
www.genielift.com
 Self-Propelled Articulating Booms
™ ™
Z -30/20N & Z -30/20N RJ
Features
Standard Features Easily Configured To Meet Your Needs Options & Accessories
Measurements Platform Productivity
Z-30/20N • Steel 3 ft 10 in (1.17 m) • Platform swing gate
• 36 ft (11.14 m) working height • Half-mesh platform inserts with
Jib Options swing gate
• 21 ft 5 in (6.53 m) horizontal reach
• 12 ft 8 in (3.86 m) up and over • 4 ft (1.22 m) jib boom • Platform top auxiliary rail
clearance • 4 ft (1.22 m) horizontal rotating • Air line to platform
• Up to 500 lbs (227 kg) lift capacity jib boom • Aircraft protection package (Not
Z-30/20N RJ available on RJ model)*
Power
• 35 ft 2 in (10.89 m) working height • Hostile environment package
• 48 V DC power source • Fire resistant hydraulic oil
• 20 ft 6 in (6.25 m) horizontal reach
• 12 ft 8 in (3.86 m) up and over clearance Drive • Biodegradable hydraulic oil
• Up to 500 lbs (227 kg) lift capacity • Tool tray
• 2WD
• Fluorescent tube caddy
Productivity Tire • Pipe cradle (pair)
• 4 ft (1.22 m) jib boom with 139° • Solid rubber non-marking • Flashing beacon
working range • Platform work lights
• Self-leveling platform • Lockable platform control box cover
• Hydraulic platform rotation
• Fully proportional controls Power
• Thumb rocker steer • AGM batteries
• Drive enable • EE UL583 Fire Protection rating
• AC power cord to platform • Battery charge indicator (BCI)
• Horn • Low voltage interrupt with BCI
• Hour meter • 800 watt 120VAC power inverter
• Tilt alarm
• Descent & travel alarms
• 355° non-continuous turntable rotation
• Zero tailswing and front arm swing

Power
• 48 V DC deep cycle battery pack
• 24 V DC auxiliary power
• Universal 30A battery smart charger

* Reduces platform weight capacity to 440 lbs

Genie United States Genie Europe Distributed By:

18340 NE 76th Street The Maltings
P.O. Box 97030 Wharf Road
Redmond, Washington 98073-9730 Grantham NG31 6BH
Telephone +1 (425) 881-1800 UK
Toll Free in USA/Canada +1 (800)-536-1800 Telephone +44 (0)1476 584333
Fax +1 (425) 883-3475 Fax +44 (0)1476 584334
Email: [email protected]

Effective Date: January, 2013. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for
instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment
is the standard written warranty applicable to the particular product and sale and we make no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade names of Terex Corporation and/or their
subsidiaries in the USA and many other countries. Genie is a registered trademark of Terex South Dakota, Inc. © 2013 Terex Corporation.

Z30NRJ 0210M. Part No. 109357 www.genielift.com