100% found this document useful (1 vote)

483 views212 pages

FMX2 Installation Comissioning

""""""'rrrrrrrrrr

Uploaded by

fayssal salvador

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

100% found this document useful (1 vote)

483 views212 pages

FMX2 Installation Comissioning

""""""'rrrrrrrrrr

Uploaded by

fayssal salvador

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 212

Energy Automation

NSN FMX2 R3.2

Systemoverview,
Installation,
commissioning and
troubleshooting

in theory and practice

FMX2 R3.2 System Overview

FMX2 R3.2 Features
FMX2 R3.2 Documentation Overview
FMX2 R3.2 Summery
AccessIntegrator Overview
FMX2 R3.2 Preparation and Installation
FMX2 R3.2 Troubleshooting

Flexible Multiplexer 2 Release 3.2

System Overview

City and Corporate Networks: Public Switched Telephone

Customers: Services: Networks:
- Banks - Voice (E&M, POTS)
- Power Plants - Data Services:
- Railways - ISDN -Trunks (2w / 4w w or w/o
- Pipelines E&M signalling)
- Highways - Access
- Other Companies (POTS, ISDN, Data)

Mobile Networks: Special Applications:

Trunks and Control: - SDH Network: Jitter reduction

- Voice+E&M, ADPCM - HICOM: Intermeshing (S0, E&M)
- Data channels

The FMX2 R3.2 represents an integrated and compact solution for all
necessary network elements in corporate networks (multiplexer, cross-
connect, PDH/SDH transport).

FMX2
FMX2 R3.2
R3.2
FMX2
FMX2 R3.2
R3.2 FMX2
FMX2 R3.2
R3.2
FMX2
FMX2 R3.2
R3.2

FMX2
FMX2 R3.2
R3.2
FMX2
FMX2 R3.2
R3.2

FMX2
FMX2 R3.2
R3.2 FMX2
FMX2 R3.2
R3.2
Computer FMX2
Computer PBX
PBX FMX2 R3.2
R3.2
Center
Center

© Siemens AG 2011
Page 5 Jun-11 Energy Automation Energy Sector
FMX2 R3.2
Primary Multiplexer + Crossconnect + Transmission

Terminal or Drop/Insert-
Multiplexer:
• 2x 2 Mbps multiplexer (64 kbps level)
• digital and analog data
• POTS and ISDN services Cross
Connect Trans-
Line
Card mission

Compact Cross-Connect:
• 32x 2 Mbps cross-connect
for nx 64 kbps and subrates 8 kbps
SIEMENS

Transmission:
• Standardized E1 (G.703) Additional benefit...
• Copper (HDB3, SHDSL)
• Fiber (PDH, SDH) All features can be provided
• Meshed network structures are supported in one single subrack!

© Siemens AG 2011
Page 6 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 –
The optimized Solution for City and Corporate Networks

 The FMX2 R3.2 multiplexer is a compact access solution

with excellent service flexibility.
 The FMX2 R3.2 concept is based on the integration of SDH
transport, 64 kbps crossconnect and flexible multiplexer
facilities within the same shelf.

FMX2 R3.2
Voice (POTS, Local Battery,
2/4w w or w/o E&M) STM1/STM4

ISDN (Uk0 2B1Q/4B3T, S0)

Service Cross Trans- 2x 2 Mbps
Data (V.24, V.35, V.36, X.21
G.703, Ethernet) Connect port Optical fiber

2 Mbps Copper
Remote Data (HDB3, SHDSL)
Terminal Uk0 128 kbps
SHDSL, OF

Applications Universal primary multiplexer (PCM30) for application in

corporate networks or small subscriber side termination in
FastLink access networks.

Signalling CAS

Services - Voice (POTS, LB, ring-down, leased lines, E&M)

- ISDN-BRA, PRA
- Data (0.6-19.2 kbps, 48, 56, 64, nx64 kbps, 2 Mbps)
- Ethernet 10/100 BaseT

Transport - Copper 2 Mbps (G.703, HDB3)

Interfaces - Copper SHDSL (also with remote power feeding for regenerators in 2 w mode)
- OF 2x 2 Mbps
- SDH STM1 optical or electrical or STM4 optical

Features - Software controlled, flexible time slot assignment

- Integrated drop/insert capability
- Digital conferences, point to multi-point mode &
broadcast for analog and digital signals
- 32 kbps ADPCM coding acc. ITU-T G.726

OAM - F-Interface for local craft terminal

- QD2-Interface for OS (AccessIntegrator)
- Internal transport channels for OAM (SISA structure)

Power Supply - Local 48/60 VDC

Mechanics - 19” or ETSI subracks for indoor operation

- Front access
- Desktop housing with access panels (ONU20 FTTO)
- Wall-housing (ONU30 FTTB)

Applications Compact Cross Connect multiplexer suitable for

small network nodes

Features - Switching matrix at 8 kbps, 64 kbps and 2 Mbps level

- Switching of bidirectional, unidirectional and
broadcast connections
- Hot standby for matrix and power supply
- CAS
- Max. 32x 2 Mbps ports, unblocked operation
- Analog and digital conferences
- Nx 64 kbps conference for up to 30 B channels
- 2 Mbps path protection in ring structures

© Siemens AG 2011
Page 10 Jun-11 Energy Automation Energy Sector
FMX2 R3.2
Different Housings for optimized Network Dimensioning

SNUS - the universal network node

Multiplexer, cross connect & transmission within one sub rack

FMX2S - the solution for large number of application

interfaces
One or two multiplexers and 2 Mbps transmission are
supported.

MXS19C - the solution for large number of application

Interfaces with high density voice
Additional to the FMX2S this shelf supports high density
cards for 2w/4w analog leased lines and E&M.

© Siemens AG 2011
Page 11 Jun-11 Energy Automation Energy Sector
FMX2 R3.2
Different Housings for optimized Network Dimensioning

ONU20 FTTO - The desktop solution

ONU30 FTTB - The wall-mounted solution

QD2

Supervision / SISA Concentrator F

a/b Telephone, LB Copper HDB3

CC LT
ISDN
S0, Uk0 2B1Q/4B3T
MUX
Copper SHDSL

VF 2w/4W E&M
LT
Data <= 64 kbps
V.24/V.35/V.36/X.21 1 OF 2x 2 Mbps
Data nx64 kbps LT
G.703/V.35/V.36/X.21
2 Mbps G.703

STM1 opt/elect.
Ethernet CMXC LT STM4 optical

2 Mbps 2 Mbps
G.703 G.703
MUX Multiplexer CC Cross connect LT Line equipment
© Siemens AG 2011
Page 13 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 - Block Diagram

MXS19C or FMX2S

12
Key features:
BEC*
m
 Operation modes:
or
Subscriber 7  terminal mux, drop-insert mux or
n+1 Linecard CUD* E1 path protection
2 Mbps
QD_S
G.703
 Wide range of services
CAS
6
 CAS-signalling
n CUD
Subscriber 1   Remote data interfaces
Linecard ZA(A,B)
1
ECC QD_S
 Sub-bitrate multiplexing
 ADPCM for analogue leased lines
 CUD:
QD_M

SUE T3
QD_S

F digital conferences
point-to-multipoint connections
QD2  Primary voltage: -36 V to -72 V
 LT not shown here

AccessIntegrator
*) optional: CUD or Bus Extension Card
n, m: depends on line card type

T3 ZA(A), ZA(B)

SNUS
Key features:
CMXC
standby
main  Switching levels: 2 Mbps,
2 Mbps 2 Mbps nx 64 kbps and nx 8 kbps
G.703  CUC  G.703
CAS CAS
16 PU16
QD_S ECC
PU16 16  Switching of framed or unframed 2 Mbps
signals
 CAS signalling
 Supports analogue & dig. conferences
QD_S
QD_M

F SUE
 Connection types: uni- and
bi-directional, loop back
QD2
 Redundancy of central unit
 E1 path protection
 Primary voltage: -36 V to -72 V
AccessIntegrator

ONU20 FTTO or ONU30 FTTB 2 Mbps

G.703
CAS

FMX2 R3.2
Key features:
2 (3)  Operation modes:
CUD
n terminal mux,
1  drop-insert mux or E1 path protection
Subscriber Linecard
ECC QD_S  Wide range of services
1
 CAS-signalling
QD_M
COSU/
 Remote data interfaces
QD_M
QD_S

F SUE  Sub-bitrate multiplexing

 ADPCM for analogue leased lines
QD2
 CUD:
- digital conferences
- point-to-multipoint connections
 Primary voltage: -36 V to -72 V
AccessIntegrator
 LT not shown here

n: depends on linecard type

ONU20: up to 2 linecards
ONU30: up to 3 linecards

One central unit supports different operation modes:

TMX60 DIMX 2x30 TMX30 (1+1)

Terminal multiplexer Drop-insert multiplexer E1 path protection

2x G.703 G.703
G.703 2x G.703

CUD CUD CUD

1 TU 1 TU 1 TU
System Bus

System Bus

System Bus
2 TU 2 TU 2 TU

3 TU 3 TU 3 TU

60 TU 30 TU 30 TU

The complete capacity The two 2 Mbps The two 2 Mbps

of both 2 Mbps interfaces operate in interfaces operate in 1+1
interfaces is terminated drop/insert mode. Single path protection.
with application time slots of the east
interfaces and west side can either
be terminated by
(voice, data, ISDN). application interfaces or
routed through the CUD - Central Unit Drop/Insert
TU - Tributary Unit
multiplexer.
© Siemens AG 2011
Page 17 Jun-11 Energy Automation Energy Sector
Flexible Multiplexer FMX2 R3.2 - Interfaces

Subscriber Side
SUB102C FMX2 R3.2
POTS
(subscriber side and exchange side) SLX102
10
Analog LL or VF with E&M sign. UAC68
6
SEM106C/108HC 1)

2w VF with local battery ringing SLB62

ISDN-BA (Uk0; 2B1Q, LT mode) or IUL82C

NTU 8

ISDN-BA (Uk0; 4B3T, LT mode) IUL84C

8
ISDN-BA (Uk0; 2B1Q, NT mode) I4UK2NTP ZA(A), ZA(B)
4 T3out

ISDN-BA (Uk0; 4B3T, NT mode) I4UK4NTP  T3in

4
CUD
ISDN-BA (S0) I8S0P 2 Mbps G.703 / CAS
8
Subrates to nx 64 kbps X.21, V.24, CPF2 ECC QD_S

V.35 or V.36, Ethernet ²) 4

fractional E1 CM64/2
1

64 kbps G.703; codirectional DSC104CO

10
1) SEM106C, SEM108HC in MXS19 only,
nx 64 kbps G.703 DSC6-nx64G 10 interfaces per card
6 2) Two Ethernet submodules per CPF2

© Siemens AG 2011
Page 18 Jun-11 Energy Automation Energy Sector
Universal Cards UAC68 / CPF2
Path Protection 64 kbps / nx 64 kbps

FMX2 R3.2 FMX2 R3.2

CPF2/ CUD CPF2/

CUD
UAC68 UAC68
Service  Main path  Service
Interface
Interface
Standby path

Two different 64 kbps time slots

in one or two 2 Mbps signals

Each service interface is assigned to two different 64 kbps time slots.

The linecard supervises the correct transmission of these time slots.

In case of main path failure the signal is routed over the stand-by path.

Interfaces
Interfaces
per
per card
card
POTS,
POTS, Subscriber
Subscriber Side,
Side, 2-wire
2-wire 10
10

POTS,
POTS, Exchange
Exchange Side,
Side, 2-wire
2-wire 10
10

2-wire,
2-wire, Local
Local battery
battery 66

2-wire
2-wire VF
VF and
and 2xE&M
2xE&M 66 // 10
10 *)
*)

4-wire
4-wire VF
VF and
and 2xE&M
2xE&M 66 // 10
10 *)
*)

2/4-wire
2/4-wire VF
VF 66 // 10
10 *)
*)

*) 10 in MXS19C only

Interfaces
Interfaces
per
per card
card
64
64 kbps,
kbps, G.703
G.703 codirectional
codirectional 10
10
V.24
V.24 // V.28,
V.28, Subrates
Subrates up
up to
to 64
64 kbps
kbps 44
V.35,
V.35, Subrates
Subrates up
up to
to 64
64 kbps
kbps or
or nn xx 64
64 kbps
kbps 44
V.36,
V.36, Subrates
Subrates up
up to
to 64
64 kbps
kbps or
or nn xx 64
64 kbps
kbps 44
X.21
X.21 // V.11,
V.11, Subrates
Subrates up
up to
to 64
64 kbps
kbps or
or nn xx 64
64 kbps
kbps 44
10/100
10/100 BaseT
BaseT 44
nn xx 64
64 kbps,
kbps, G.703
G.703 codirectional
codirectional 66
nn xx 64
64 kbps,
kbps, G.703
G.703 contradirectional
contradirectional 22
64
64 kbps,
kbps, G.703
G.703 centralized
centralized clock
clock 66
Fractional
Fractional E1,
E1, nn xx 64
64 kbps,
kbps, 22 Mbps
Mbps G.703
G.703 tributary
tributary 11

Interfaces
per card

So-Interface 8

Uko-Interface, 2B1Q (LT mode) 8

Uko-Interface, 2B1Q (NT mode) 4

Uko-Interface, 4B3T (LT mode) 8

Uko-Interface, 4B3T (NT mode) 4

Media Line Interfaces Capacity per Module Functionality

Interface per Card Link

Copper SHDSL 2 1x 2 Mbps LT2ME1  E1 transparent

 E1 fractional
 PRA (S2M)

Fiber WDM (one 1 2x 2 Mbps LTO  2x E1 transparent

fiber)  Overhead channel for
remote control

© Siemens AG 2011
Page 23 Jun-11 Energy Automation Energy Sector
Line Termination LTO
permits Transport of 2 E1 via one Fibre

OH OH

2x 2 Mbps LTO LTO 2x 2 Mbps

G.703 (LT) (NT) G.703
8.7 Mbps 1300 nm/1500nm
Power budget: 24dB

QD2

OH: overhead channel 64 kbps V.11 (payload 9.6 kbps)

 SHDSL offers the same bandwidth and services as HDSL

 SHDSL requires only one copper pair at almost the same

coverage (depending on cable parameters SHDSL
reaches app. 95%-100% of the HDSL coverage)

 SHDSL is compatible to the HDSL spectrum, that means

there is no hurdle to use SHDSL instead of HDSL in terms
of network compatibility

Benefit:
SHDSL needs only one copper pair for a
full 2 Mbps E1 transmission.

Port 1 Port 1
TR 2/4 wires TR
Module Module
E1 transparent E1 transparent
E1 fractional LT2ME1 SHDSL LT2ME1 E1 fractional
PRA (V2M) PRA (S2M)
TR TR
Module 2/4 wires Module
Port 2 Port 2

LT2ME1 board provides 2 SHDSL interfaces in FMX2 R3.2 shelves

2 Mbps 2 Mbps
G.703 G.703
Subscriber Interfaces

MUX CC

STM1
SMX 1/4c opt./electrical,
STM4 optical

FMX2
CMXC
R3.2

Module typ LT LC
(LT2ME1) CPF2 CM64/2

Service
X21 CIM-X21 X
V24 CIM-V24 X
V35 CIM-V35 X
V36 CIM-V36 X
FE1 X (S2M, V2M) X
Ethernet CIM-nx64E X
Ethernet LT Module Eth. X

Transport
SHDSL 2w LT Mod. SHDSL X
SHDSL 4w SDSL4OP X

S2M – ISDN 2-Mbit/s-Interface, Subscriber Side. SHDSL 2w is also available with remote power feeding.
V2M – ISDN 2-Mbit/s-Interface, Exchange Side FE1 = Fractional 2MBit/s
© Siemens AG 2011
Page 28 Jun-11 Energy Automation Energy Sector
Ethernet Application with LT2ME1

E1 G.703 LT2ME1 Ethernet

ETH 10 / 100 BaseT
module

Ethernet
10 / 100 BaseT
E1 G.703 ETH
module
• Combines
Main various system
Features:
modules: multiplexer, PDH or
• Max.
SDH 2transmission
modules per LT2ME1 and
equipment
cross-connect in one single
• Any mix with other LT modules
subrack.
LT2ME1
E1 G.703 Ethernet •• Point-to-point Ethpanel.
Front termination connection
ETH 10 / 100 BaseT
module •• Link
Line either 31x
cards as in 64 kbps or full E1
FMX2S.
loop

SHDSL
E1 G.703

Network wide Ethernet switching Ethernet encapsulated in

G.703/G.704 nx64kbit (n=1..31)

2Mbps Port A Port B 2Mbps Port A Port B 2Mbps

G.703 G.703 G.703
G.704 G.704 G.704
FMX2 FMX2
CUD CUD
Main Features:
CPF2 Internal Ethernet uplink
CPF2 Internal Ethernet uplink • Max. 2 modules per CPF2
Ethernet Ethernet • Mix with other CIM modules
Switch Local Switch Local
Module Module
Ethernet Ethernet and other linecards
switching switching
• Link data rate up to 31x 64 kps
Local Ethernet ports Local Ethernet ports
• L2 switch support
Ethernet • Flow control and back pressure
4

4
1

TDM
4 x 10/100Base-T 4 x 10/100Base-T

MXS19C FMX2S SNUS

• 18 slots for equipping.

• 16 slots for equipping.
• One or two multiplexers and 6 • Combines various system
• Combines various system
line terminations for optical fiber • 18 slots for equipping. modules: multiplexer, PDH or
• Max two multiplexers and 6 line modules: multiplexer, PDH or
or copper cable. • One or two multiplexers and 6 SDH transmission equipment
terminations for optical fiber or SDH transmission equipment
• Dedicated slot for SISA line terminations for optical fiber and cross-connect in one single
copper cable. and cross-connect in one single
concentrator. or copper cable. subrack.
subrack.
• Front termination panel • Front termination panel.
• Optionally equipping with up to • Front termination panel • Front termination panel.
two front connection panels • Line cards as in FMX2S.
• Line cards as in FMX2S.
which are attached on top of the
shelf.
• High density ports possible with
dedicated line cards.

11 22 33 44 55 66 77 88 99 10
10 11
11 12
12 13
13 14
14 15
15 16
16 17
17 18
18

CUD*)*)
LT*)*)

LT*)*)
LT*)*)
BEC*)*) CUD
LT

LT
LT
CUD
SUE

CUD
SUE

LC
LC
LC

LC
LC
LC
LC

LT
LT

LT
LC

LC
LC
LC

LC
LC
LC
LC

LT
LT

LT
LC*)*)
LC*)*)
LC*)*)

BEC
LC

LC
LC
General shelf-features

 19'' (adapter for use

in ETSI-Racks avail.)
FMX2S  Height: 400 mm
Depth: 240 mm
SIEMENS

*) alternative equipping
 Front access panel

11 22 33 44 55 66 77 88 99 10
10 11
11 12
12 13
13 14 16 18
14 16 18

OTSU2M*)*)
TC1E3*)*)
LT*)*)
LT*)*)

ADM1o/ADM4
PSD*)*) OTSU2M
TC21E1*)*)TC1E3

ADM1o/ADM4
LT
LT

PU16

PU16
CUD

CUC
CUC
SUE

PU16

PU16
CUD

CUC
CUC
SUE

LC
LC
LC

LT
LC

LC
LC
LC

LT
LC*)*)
LC*)*)

TC21E1
LC
LC

PSD
FMX2 R3.2 Multiplexer CMXC SMX

General shelf-features:

 19'' (adapter for use

in ETSI-Racks avail.)
 Height: 400 mm
SNUS  Depth: 240 mm
SIEMENS

*) alternative equipping  Front access panel

11 22 33 44 55 66 77 88 99 10
10 11
11 12
12 13
13 14
14 15
15 16
16 17
17 18
18

CUD*)*)
LT*)*)
LT*)*)

LT*)*)

LT*)*)
LT*)*)

LT*)*)
BEC*)*) CUD
LT
LT

LT
LT

SISAK
SISAK
CUD
SUE

CUD
SUE

LC
LC

LC
LC
LC
LC
LT
LT

LC
LC

LC
LC
LC
LC
LT
LT

LC*)*)
LC*)*)

LC*)*)

LC*)*)
LC*)*)
LC*)*)
BEC
LC
LC

LC
LC
LC
General shelf-features
CUD Central unit
LC Line card  19'' (adapter for use
LT Line equipment LTO / LT2ME1 in ETSI-Racks avail.)
SUE Supervision unit
 Height: 300 mm
MXS19C SISAK SISA concentrator
 Depth: 240 mm
BEC Bus extension unit
SIEMENS

 Front access panel optional

*) alternative equipping

Max. capacity
CUD 1
LC 3
LT 1
MSUE 1

Dimensions (W x H x D): 440 x 535 x 260

MDF ratio: 1:1.6
Battery backup: typ. 2.5 Ah (>8 h @ 0,08 Erl)

© Siemens AG 2011
Page 35 Jun-11 Energy Automation Energy Sector
ONU20FTTO - An effective Multiplexer or ONU Solution in
a compact Housing (Desktop or wall-mounted)

Max. capacity
CUD 1
LC 2
LT 1
COSU 1

Dimensions (W x H x D): 370 x 165 x 247

MDF capacity: connection panel
Battery backup: typ. 5 Ah (>12 h @ 0,08 Erl)

© Siemens AG 2011
Page 36 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 - Documentation Overview
The Customer Documentation of the FMX2R3.2 comprises the following descriptions and main
manuals delivered on CD-ROM.
- User Manual FMX2R3.2 UMN FMX2R3.2
This manual, an overview about the components and their interworking in networks with the multiplexer FMX2R3.2 is given.
Functions, commissioning, operation and maintenance of FMX2R3.2 are described in detail. The operation is done via the graphical
user interface of the AccessIntegrator domain manager version 8.3 (ACI DM V8.3) or higher versions. For the ACI DM V8.3, there is
a separate documentation available.

- User Manual CMXC UMN CMXC

In this Manual, an overview about the components and their interworking in the access network of the Cross-Connect Multiplexer
CMXC is given. Function, commissioning, operation and maintenance are described in detail. The operation is done via the
graphical interface of the Operating System (OS). This is the Domain Manager ACI Software up version 8.2. For the ACI DM V8.2,
there is a separate documentation available.

- User Manual LE2 UMN LE2

This manual describes the 2-Mbit/s line terminating units (LTx) of FastLink and FMX2R3.1. Functions, commissioning, operation and
maintenance of the LTx are described in detail. The operation is done via the graphical interface of the Operating System (OS). The
OS is the AccessIntegrator Domain Manager ACI DM up version V8.2.

- Installation Manual GCP IMN

This assembly document contains of a set of General cabling plans to handle the equipment in an effective way

- Maintenance UMN MMN

The maintenance handbook describes all such measures as are necessary for the rectification of faults which can be localized and
rectified via the operator terminals and the appropriate alarm signalling.
Following Sections are contained in the maintenance manual:
– Monitoring
– Maintenance
– Fault rectification

AccessIntegrator V8

External
Management System

TMF CORBA SNMP File Export/Import

Connection Management Alarming Inventory data
Alarms Subscriber line test (TDM) Alarm Log files
Equipment data Service Provisioning (TDM) Performance Logs
Mass Prov. File (TDM)

AccessIntegrator

QD2 Over IP SNMP

Access Network

External OSS/BSS
Management Management

ACI Network
Manager TDM 8.2
Network

Layer

CORBA / SNMP

Value-added applications
ACI Cross Domain Manager

CORBA / SNMP
Domain

Layer

CORBA / SNMP

DM 8.3
Management

(Fastlink EM hiX EM EM EM EM EM
Element

and EM hiX EM hiD

5300 AMGW Gen MSAP ONU-S ULAF+
Layer

FMX2
EM)

Management solutions for small,

medium & multi-regional networks
Supported Platforms: Windows / UNIX
HW: Intel-based PCs / Sun Servers
Remote Clients
WAN

Multi Server
Client / Server
Single User
LCT

Fault Management Performance Management

• Time optimized alarm ALARM • Collection of Performance
recognition Data
• Cost and time saying fault • Prerequisite for SLA
analysis from a centralized • Prerequisite for advanced billing
monitoring location systems
• Optimal instructions • Support of network maintenance
for service personnel
• Subscriber line tests
• Loopback tests
• Network maintenance/ Security Management
restoration • Protection against
unauthorized access
Configuration Management and loss of data
• Comprehensive & Optimized NE • Functionality dependent access
configuration control
• Time optimized and
reliable provisioning
of TDM services Accounting Management
• Optimal usage of network • TDM Service logs
resources
• Support of mass provisioning

© Siemens AG 2011
Page 42 Jun-11 Energy Automation Energy Sector
ACI TDM Network Management
Service Provisioning & Assurance

TDM subscriber management

End-to-end path and service
management
Workflow for operational
processes
Automatic hop-driven routing

Integrated easy to use

user interface
Network map
DCN view
Functional view
Shelf view
Navigation between views
NE search function
Compliant to ITU G.771
standard

Management of complete Networks Management of assigned VPNs

ACI client ACI client
ACI client
subnetwork A subnetwork A
subnetwork A

subnetwork B subnetwork B
subnetwork B

 Definition of management
VPNs on NE-level
 Access is restricted to
B management domain B B
 Administration of
functionality and domain

Fully compliant with TMF CORBA standards 513/814/608

Customer Care Fault Management Inventory

OSS Integration

Service Supported Functions *:

Provisioning
Provisioning OSS
• Provisioning
Open CORBA Interface • Service Assurance
Equipment
• Inventory management
Operation &
Maintenance
ACI
• Retrieval of the network
SNMP/QD2 Interfaces configuration
• Creation of sub-network
connections
Access
Network • Deletion of sub-network
connections
• Retrieval of state information
* The support of functionality is NE specific.

Service Centralized External

Provisioning Fault Management Test System

OSS Integration

Equipment
Operation &
Maintenance ACI
SNMP/QD2 Interfaces

Access
Network

SNMP Alarm Forwarding Interface

SNMP Provisioning Interface (QD2)
SNMP Subscriber Line Test (QD2) (not for FMX2)
© Siemens AG 2011
Page 47 Jun-11 Energy Automation Energy Sector
Management System

AccessIntegrator LCT

Installation

Network Manager
- Graphical network representation
- Network Configuration (path, services and subscriber management)
- network editor

Element Manager
- Fault Management
- Configuration Management
- Quality Management
- Performance Management
- Security Management

ACI Element Manager (EM)

The Element Manager is a cost-effective solution for networks f a single type.

The functionality regarding configuration of network elements is not reduced in comparsion to the other ACI Manager. However, the
main task of EM lays on the operation and configuration at NE level, therefore the network features are reduced for the Element
Manager (e.g. no End to End management).

The EM version depends only of the NE type and version and not of the version of the other ACI components.

For the connection to an overlaying network management (ACI or 3rd Party NMS) a northbound TMF Corba interface is available.

The Element Manager for the classical FastLink network elements (including PHUB) is actually implemented in the ACI Domain
Manager. The network element access can be either QD2- or SNMP-based.

In contract to FastLink network elements (TDM), the other network elements (cell based) are exclusive accedded via SNMP-DCN.

Additional to the individual NE related Element Manager, there will be a Generic Element Manager, which is used for the
implementation of existing Element Manager or Local Craft Terminal. The Generic Element Manager offers a unique framework for
this implementation. the operator is doing some generic tasks (e.g. Alarm list, SW download ) via the known ACI buttons and menus
and only for the NE specific configuration the embedded CLT must be used.

ACI Domain Manager (DM)

The Domain Manager is used as an additional operational support for the management of large networks of multiple NE types.

The operator is able to see all network elements in the Graphical User interface (GUI) of the Domain Manager. Network Tasks such
as alarm handling via a central alarm list or drawing of network maps are possible.

For operational task on the network elements level an ACI EM client session is opened and the operator is able to configure, in
dependency of the security management, the network elements.

Implemented in the ACI Domain Manager is the Security Management based on functionality and a selection of network elements
(security domaining).

Up to ACI Domain Manager 8.2 the Element manager TDM (QD2) is included, meaning that the feature End to End Management for
TDM services (Path and Service Management) is integrated in the ACI Domain Manager. In later versions of ACI DM a separate
Element manager TDM will be available.

ACI Network Manager

The ACI network Manager is used an additional operation support for the ,management of large TDM networks, which are managed
by more than one ACI Domain Manager (e.g. large FastLink networks).

With the ACI Network Manager it is possible to create services manually, semi automatically or automatically routed and monitor the
status of the paths. The big advantage of the ACI Network Manager is the inter domain operation to provide End to End
Management.

ACI Local Craft Terminal

in addition, a Local Craft terminal is available. It is a special form of a single workplace configuration system, which provides
communication and maintenance of network elements for the use on side. The LCT is connected via F-interface to the equipment
(or via out band Ethernet port for SNMP NEs) and has reduced network management functionality.

The graphical user interface is identical to the one presented by ACI client, which most operators are already familiar with.

Component Type/Value *) Remark

General Notebook/Laptop With optional accumulator power
Required interface: 1 x RS232C
Additional interface (recommended):
1 x VGA, 1 x Centronics,
1 x keyboard (PS/2), 1 x mouse (PS/2)
CPU Pentium – 300 MHz
Cache 256kByte, Sec. Level Cache
RAM 128 MByte
Hard disk 2.1 GByte Max. size of ACI database = 500 MByte
Floppy 1.44 MByte

CD-ROM 24x
Disk controller IDE Onboard

Graphic adapter SVGA, 2MByte VRAM Onboard

LAN adapter 10/100 MBit/s, twisted pair

LCD display Color, 11.3”, Resolution 800x600
Connection cable for the F-Ports Universal cable Code number: S42023-A877-S100
Total length 3 m
Connecting cable for the Crossed twisted pair LAN cable Code number: S30257-Z8325-Axxx
100BaseT interface of the PHUBS xxx = cable length in dm
Possible length: 5 dm to 50 dm in step of 5 dm
*) All values = minimum requirements

For ACI DM LCT software the following operating system is required:

Windows XP with service pack

Windows 2000 with service pack.

The current Windows service pack is imperative for a problem-free functioning system.

SW Components Description

Versant 6 Database SW

SNMP Script Support SNMP Script Support is used for script based configuration
of SNMP network elements
AccessIntegrator Domain Manager Standard SW for Multi-user/single-user system

AccessIntegrator LCT Standard SW for Laptop installation

AccessIntegrator Domain Manager API client Interface SW:

External SNMP interface for the integration of ACI into an
external management system. The external management
system can receive alarm information from ACI (traps) and
carry out subscriber line tests.
VISCON VISCON allows connecting many QD2 Ethernet ports such
as SISA-GK/E or SISA-V to AccessIntegrator management
system
Tools: PDPT Tool for graphical display of performance data.

Tools: PrintKey 2000 The program enables the user to make screenshots directly
with the “PrtSc” button.
Tools: Internet Explorer The Internet Explorer is necessary if a network element is
partly integrated and has to be configured with the
corresponding web-based LCT.
Tools: Java VM patch for Internet Explorer Patch for Java virtual machine

Subject to change!
© Siemens AG 2011
Page 55 Jun-11 Energy Automation Energy Sector
Documentation Of AccessIntegrator LCT

The documentation for the AccessIntegrator is delivered on CD-ROM and

contains of the following PDF-files.

- System Administration ADMN: ACI DM

The System Administration manual is intended for those responsible for ensuring the smooth operation of the AccessIntegrator
components. It describes the security mechanisms available and explains their use (e.g. data backup and restore).

- Installation IMN: ACI DM

The Installation manual is aimed at those responsible for installing the AccessIntegrator software and configuring the underlying
system. It contains detailed instructions on how to install the individual AccessIntegrator components.

- Operation OMN: ACI DM

The Operation manual is intended for those involved in the configuration and supervision of access networks and network elements
using the AccessIntegrator. It includes a description of the GUI and step-by-step instructions for configuration and monitoring.

- User Manual Network Manager UMN: ACI NM

To start the tool REGEDIT:

- select START and RUN from the task line

- type in “regedit” and press OK

Check of registry contents of DisableDHCPMediaSense

My Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters

If the key is not available please create this key by following steps:

RM on empty part of the windows.

Select NEU.
Select DWORD-Value.
Enter the key name: “DisableDHCPMediaSense”.
press RETURN to finish key creation.
Select the new key and open the value change by press return or double-click.
Change value from 0 to 1.
Accept changes with OK.
Close REGEDIT and restart operation system.

RM = right mouse key click

This steps are necessary for the

“download”- or the “packed” version
of the software!

© Siemens AG 2011
Page 60 Jun-11 Energy Automation Energy Sector
Preinstallation VERSANT
To install the Software navigate to the unpacked folder or insert the CD in the CD-ROM drive and run
“START.EXE”.

3
This address is
only necessary
for the
Installation of
the LCT

Check if installed service is running:

Open Service windows by: START > Control Panel > Performance and Maintenance > Administrative Tools > Services

© Siemens AG 2011
Page 64 Jun-11 Energy Automation Energy Sector
AccessIntegrator LCT - Installation
To continue the installation navigate to the destination folder (download version) or select the CD-ROM drive and
run “START.EXE” again.

! This selection is only necessary

for SNMP based NE.
For using of the QD2-based FMX2 it can be deselected!

To create a new port configuration:

(1) select “New”
(2) for COM1 leave the settings
or change to COM2
(3) check setting in configurations window

If a “serial to USB”-converter is used please check

this adapter is configured as COM1 or COM2!
© Siemens AG 2011
Page 69 Jun-11 Energy Automation Energy Sector
AccessIntegrator LCT - Installation

After restart run LCT software by:

AccessIntegrator LCT

Start-up

Two ways are available to run the AccessIntagrator in LCT-Mode

Standard start:

In case of automatic start of the necessary services an alternative start-up is

available:

Start the Process Monitor LCT and follow the instructions.

To create the first shortcuts select file “acic-classic-lct.exe”
from installation directory (e.g. c:\Program Files\Siemens AG\AccessIntegrator LCT 8.3\bin)
To create the second shortcut select file “acip-procmon.lct.exe” from the same directory
© Siemens AG 2011
Page 72 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Getting Access

The red cross symbols the

disconnection to the NE.

After connection to the NE the

red cross is deleted.

Double-click here to open the

open DCN#7 windows.

Menu Bar Tool Bar

Equipment View

DCN View

Status Bar

No NE in Telegrams/sec
NE Status maintenance TX/Rx DCN non blocked

Alarm indication Disconnected Concurrent QD2 Time and Date

NE/modules operations

At the beginning of the FMX2 configuration there is no software loaded on the

different cards of the FMX2. Also there is a limited view inside the DCN-
Windows (PC-COM Port, SUE and ASA).

The Application Software (APS) package contain the loadable software for the
different cards and has to be loaded step by step to all components.

1. SUE
2. CUD
3. Linecards and Modules
4. all other cards

After finishing the next step is to configure the Multiplexer

The first step to initialise the equipment is to set the shelf address for the SUE.
This is done with dip-switch S100 for the FMX2S and S101 for SNUS.

Double-click here to open the

open DCN#7 windows.

RM and select NE
Configuration and General NE
Parameters to open the
equipment view.

RM and select Software

Management and APS
Management... to open the
Software Download window.

Select the file from the package.

To find the corresponding please read

the note coming with each package of
the software.
e.g. FM32SBR0.004.pdf info file from
package #004.

After the successful download of the

software the DCN#7 windows can be
expand to see the new available icons.

Select the next element for the

software download and continue until
all are loaded.

Expand the DCN tree and select the

multiplexer icon and open the
Equipment view by RM and Equipment
View.

Select a card for

software load.

After selecting the software file from

the APS list choose a free File
Number for the load or overwrite an
existing.
© Siemens AG 2011
Page 84 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 - APS

Special features of the CPF2.

The CPF2 is a base card to carry up to 4 submodules. The software download to the base card itself is like the other
cards done to the CUD. For the submodules an other way is necessary. First select the CUD and load the submodule
software in store number 100. After this select the CPF2 card from the equipment view switch to slider General,
select the module place and press update firmware to load the software from the CUD info the module.

After the download is finished select the 2

active button Activate File 1 or 2 to switch 1
the module to the new software.

Select the Equipment view from the DCN#7 windows by RM Equipment view or by
Ctrl-E for the SUE.

RM on SUE and select NE

Configuration > General NE
Parameters opens the
windows

In the slider Configuration only the Master port can be

configured. Select between 1.2, 9.6, 64, 128 and 0.6 kbit/s.
Default value is 64 kbit/s. The Slave ports is automatically
synchronised.
© Siemens AG 2011
Page 86 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Configuration Of CUD

Select the Equipment view from the DCN#7 windows by RM Equipment view or by
Ctrl-E for the CUD.

RM on CUD and select NE

Configuration > General NE
Parameters opens the
windows

In the slider Interfaces only the Master port can be configured.

Select between 1.2, 9.6, 64 and 128 kbit/s. Default value is 64
kbit/s. The Slave ports automatically synchronised.

Select the Equipment view from the DCN#7

windows by RM Equipment view or by Ctrl-E for
the CUD incl. Line cards.

CHARACTERISTICS OF A
SYNCHRONOUS DIGITAL MULTIPLEX EQUIPMENT
OPERATING AT 2048 kbit/s

CHARACTERISTICS OF
PRIMARY PCM MULTIPLEX EQUIPMENT
OPERATING AT 2048 kbit/s

Select the Equipment view from the DCN#7

windows by RM Equipment view or by Ctrl-E for
the CUD incl. Line cards.

RM on UAC68 and select NE

Configuration > General NE
Parameters opens the windows

In the following sliders the functionality of the UAC68 can be configured

individual for each of the six interfaces. The first slides shows the status of
all interfaces.

In the “Voice frequency level“ section the gain/attenuation can be set

separately for the input and output signal.
Under “Channel assignment“ the procedure which is used for A/D conversion
can be applied and if ADPCM is selected, the channel halves to be seized.
Under ”Interface configuration“ select whether the VF interface will be used as
a 2- or 4-wire interface.
In the “Signalling configuration“ section the behaviour of the VF output lines in
the vent of a fault is defined.
The two sections “CAS assignment on F1in/out“ define whether the signalling
bits for E&M signalling will be inserted into the CAS signalling frame. If
necessary the bits can be inverted individually.
The terminating impedance for the lines used is to be set in the “Line
impedance“ field.
Under “Termination hybrid impedance“ the impedance of the remote hybrid
(subscriber terminal) is set for two-wire lines. This value is necessary to
compensate for distortions caused by the hybrid.

Confirm your settings with “Apply”.

Repeat the process for all channels of the UAC68.

In the “Port“ section mark the field “active“ to switch the channel to active.
Set the “Digital internal loop“ to “off“.
In the “Maintenance mode“ section there are various test options available
for the channel. For normal operation set “Maintenance mode“ to “off“.

Confirm your settings with “Apply”.

Depending on project, the operation mode must be set and the necessary
connections are to switch.

Select the operation mode corresponding with the operation mode on the
CUD from the “Conference/Protection” field:

Valid values Explanation

None,
L - MP, Operation mode “Point (time slot) to Multipoint”,
(duplex mode between subscriber#1 (point) and all other
subscriber),
A - BC, Operation mode “Point (port A) Broadcast”
B - BC, Operation mode “Point (port B) Broadcast”,

L - BC, Operation mode “Point (time slot) Broadcast”

(simplex mode: Point transmits)

A and B Operation mode drop channel operation of 64 kbit/s time

slots on port A and port B

Select any time slot of the port A or B according to the planning document.
Time slots which would collide are marked with X.
The existing connection to a time slot can be
deleted in the following way: select the time
slot (marked) and after that none in the drop
down list. Than the time slot can be freely
configured again.
© Siemens AG 2011
Page 98 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the SUB102

Under “Port:“ check the channel which is to be selected.

In the “Voice frequency level“ section the gain/attenuation can be

set separately for the input and output signal.
Under “Metering frequency“ and “Metering voltage“ set the
characteristics of the meter pulse which is transmitted to the
subscriber (metering voltage only displayed with -C1).
The line impedance can be set to 600 Ohm, 900 Ohm,
220Ohm+(820 Ohm ||115 nF) or complex.

Confirm all settings with “Apply”.

Repeat the process for all channels of the SUB102.

In the “Ringing frequency“ section the frequency of the ringing voltage which
will be transmitted to the subscriber is to be set (ringing frequency only
displayed with -C1).
Under “CAS signalling“ select the type of CAS signalling which is to be used
by the line card for this port. Ensure here that the remote end of the
SUB102 is set in the same way.
In the “Release guard time“ field, define the minimum time for which the
interface lines to the subscriber must be deactivated after a call is cleared
down. In the remaining fields the following settings can be made.
– “Feeding supervision“ The feed current of the port will be reduced to
around 2 mA if this is preset by the exchange. This function is only possible
in conjunction with the SLX102/E.
– “Ground key“ Activation of the ground key on the subscriber terminal is
transmitted from the SUB102 to the remote end.

– “Hook flash“ The release time (time prior to detection of on hook) is switched over from 160 ms to 1000 ms the times are load-
dependent).
– “Ringing tone“ This point is only of significance if “Ring down” was selected under “CAS signalling“. In such cases a ringing signal is
inserted into the time slot at Station B if the subscriber at Station A lifts the handset. This function must be selected at the station which is
to insert the ringing tone into time slot.
– “Dialling Correction“ The dial pulse information from the subscriber terminal is recognized by the SUB102 and limited to specific values
in the onwards direction. The maximum
pulse length is then 60 ms, the minimum pause time 40 ms. Ensure in such cases that a hook flash is also affected by these limitations.
Confirm your settings with “Apply”.
Repeat the process for all channels of the SUB102.
© Siemens AG 2011
Page 101 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the SUB102

The “Loop“ field may not be marked.

Set the “Maintenance mode“ to “Off“, the “Channel connection“ to “To wire“
and the “Port“ to “Active“. This releases the channel for transparent
transmission.

Confirm your settings with “Apply”.

Repeat the process for all channels of the SUB102.

In the “CAS-Alarm“ section define whether an alarm is to be generated for

the state
listed there (field marked) or not.

Confirm your settings with “Apply”.

Repeat the process for all channels of the SUB102.

Check the status of the individual ports.

Depending on project, the operation mode must be set and the necessary
connections are to switch.

Select the operation mode corresponding with the operation mode on the
CUD from the “Conference/Protection” field:

Valid values Explanation

L - BC, Operation mode “Point (time slot) Broadcast”

(simplex mode: Point transmits)

A and B Operation mode drop channel operation of 64 kbit/s time

slots on port A and port B

Select any time slot of the port A or B according to the planning document.
Time slots which would collide are marked with X.
The existing connection to a time slot can be
deleted in the following way: select the time
slot (marked) and after that none in the drop
down list. Than the time slot can be freely
configured again.
© Siemens AG 2011
Page 105 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the SLX102

Under “Port:“ check the channel which is to be selected.

In the “Voice frequency level“ section the gain/attenuation can be set

separately for the input and output signal.
If the field “Metering correction“ is marked the charge pulses detected are
transmitted with a defined pulse length (generally 160 ms) to the remote
end.
The line impedance it’s fixed by the hardware and can’t be changed.

Confirm your settings with “Apply”.

Repeat the process for all channels of the SLX102/E.

Under “CAS signalling“ select the type of CAS signalling which is to be used
by the line card for this port. Ensure here that the remote end of the
SLX102/E is set in the same way.
In the “Release guard time“ field, define the minimum time for which the
interface lines to the exchange must be deactivated after a call is cleared
down.
In the remaining fields the following settings can be made
– “Feeding supervision“
The system detects whether the feed current of the port was reduced on the
exchange side. If this state is detected, it is transmitted via CAS to the distant
end of the SLX102/E.
– “Hook flash“
The release time (time prior to detection of on hook) is switched over from
160 ms to 1000 ms the times are load-dependent).
– “Checking exchange“
The port of the SLX102/E checks whether a feed voltage is provided by the
exchange. If this voltage is missing the port will be blocked and an alarm
generated.

Confirm your settings with “Apply”.

Repeat the process for all channels of the SLX102/E.

The “Loop“ field may not be marked.

Set the “Maintenance mode“ to “Off“ and the “Port“ to “Active“. This
releases the channel for transparent transmission.

Confirm your settings with “Apply”.

Repeat the process for all channels of the SLX102/E.

Check the status of the individual ports.

Via Connections the interfaces can be attached to the available time slots
of the CUD. This is an alternative way to do the same configuration like
direct in the CUD configuration window.

Select the operation mode corresponding with the operation mode on the
CUD from the “Conference/Protection” field:

Valid values Explanation

L - BC, Operation mode “Point (time slot) Broadcast”

(simplex mode: Point transmits)

A and B Operation mode drop channel operation of 64 kbit/s time

slots on port A and port B

Select any time slot of the port A or B according to the planning document.
Time slots which would collide are marked with X.
The existing connection to a time slot can be
deleted in the following way: select the time
slot (marked) and after that none in the drop
down list. Than the time slot can be freely
configured again.
© Siemens AG 2011
Page 111 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the DSC104CO

© Siemens AG 2011
Page 112 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the DSC104CO
If the port is to be cross connected with the same time slot/s as already used for
other ports, the field “Multipoint cluster“ must be marked. A software protocol,
applied between the data terminals, must ensure that only one slave terminal
device transmits at any one time, while the others output continuous ones. Two
point-to-multipoint connections can be set up on one DSC104C line card, with
the interfaces participating in each point-to-multipoint connection always being
either even numbered
ones or odd numbered ones.

Confirm your settings with “Apply”.

Repeat the process for all channels of the DSC104C.

© Siemens AG 2011
Page 113 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the DSC104CO
Activate data transmission by marking the “Unblocked” field under “Blocking
state“.
In the “Loops“ section, mark the field “No loop“.

Confirm your settings with “Apply”.

Repeat the process for all channels of the DSC104C.

The “Criteria“ section allows you to chose whether an alarm is to be generated

or not for the states listed there. If an alarm message is desired, the
corresponding field is to be marked.

Confirm your settings with “Apply”.

Repeat the process for all channels of the DSC104C.

Via Connections the interfaces can be attached to the available time slots
of the CUD. This is an alternative way to do the same configuration like
direct in the CUD configuration window.

Select the operation mode corresponding with the operation mode on the
CUD from the “Conference/Protection” field:

Valid values Explanation

L - BC, Operation mode “Point (time slot) Broadcast”

(simplex mode: Point transmits)

A and B Operation mode drop channel operation of 64 kbit/s time

slots on port A and port B

Select any time slot of the port A or B according to the planning document.
Time slots which would collide are marked with X.
The existing connection to a time slot can be
deleted in the following way: select the time
slot (marked) and after that none in the drop
down list. Than the time slot can be freely
configured again.
© Siemens AG 2011
Page 116 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2

The following slides of the V.24 interface are representative

for all kinds of submodules.

The General slider gives information about the installed

submodules on the CPF2. Also the software download to
the submodules is done here.
Update Firmware transfers the loaded software from the
CUD to selected submodule in the inactive memory. To
activate the new software press the active bottom Activate
File 1 or 2.

Confirm your settings with “Apply”.

Repeat the process for all ports of the CPF2

© Siemens AG 2011
Page 118 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – V.24
All necessary parameters for this interface can be set here.

Under “Signalling to remote DCE“, select whether and in

what way transmission of the C/I signalling to the distant
end is to take place. If “CAS signalling“ was selected
here, the type of CAS transmission can be selected under
“Signal transmission“.

Click on the “Parameters for X/V Interface“ button to define

the characteristics of the V.24 interface.

Click on „Apply“ to send your settings to the NE.

© Siemens AG 2011
Page 119 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – V.24
Clockmode/Edge:
Protocol: Transparent or Protocol
Circuit signals:
108.2/S1.2
105/S2
Delay 106->106[ms]
106/M2
107/M1
109/M5
Character: 7, 8 or 9 data bits
Stop bits: 1 or 2 stop bits
Parity: none, even or odd parity

In the “Blocking state“ section, switch the port to

“unblocked“.
In field “Type of remote DCE“ select the remote equipment
of the CPF2.
The remaining functions of this register card only provide a
number of different test functions. Ensure that no loopbacks
are applied.

Click on „Apply“ to send your settings to the NE.

© Siemens AG 2011
Page 121 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – V.24
This register card provides the option of making statements
about the quality of data transmission. A test generator
located on the CPF2 can be connected to the different ports
to do this. For commissioning it is only necessary to ensure
that no text pattern options are checked. Click on „Apply“ to
send your settings to the NE.

© Siemens AG 2011
Page 122 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – V.24
Under “Alarm type“ a selection can be made for the port as
to whether a channel alarm is to be indicated as an urgent
alarm (A-alarm) or a non-urgent alarm
(C-alarm). The “Supervision of“ section defines the states of
the V.24 interface that lead to an alarm.
If a channel alarm at the port is detected (in accordance
with the previous settings) the settings made under “Alarm
state“ for receive and send data will be accepted.

Click on „Apply“ to send your settings to the NE.

The “Monitoring“ register card is not of significance for

commissioning the V.24 interface.
Only monitoring functions are provided here.

© Siemens AG 2011
Page 124 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – V.24
Checking the status of the available ports.

© Siemens AG 2011
Page 125 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2
Modules CIM-n×64V24, CIM-n×64V35, CIM-
n×64V36, CIM-n×64X21
Valid values Explanation:
None, Operation mode puts through 64-kbit/s time
slots between port A and port B

FM, Operation mode “digital conference”

(duplex mode between all subscribers)
A - MP Operation mode “Point (port A) to
Multipoint”
B - MP Operation mode “Point (port B) to
Multipoint”
L - MP Operation mode “Point (time slot) to
Multipoint”
(duplex mode between subscriber#1
(point) and all other subscriber),
A - BC Operation mode “Point (port A)
Broadcast”
B - BC Operation mode “Point (port B)
Broadcast”
L - BC Operation mode “Point (time slot)
Broadcast”
(simplex mode: Point transmits)

A and B Operation mode drop channel operation of 64

kbit/s time slots on port A and port B

The following slides of the X.21 interface are representative

for all kinds of submodules.

The General slider gives information about the installed

Confirm your settings with “Apply”.

Repeat the process for all ports of the CPF2

© Siemens AG 2011
Page 127 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – X.21
There is also the option of scrambling the data. Two
different procedures (PCM and V.38) are supported here. If
a scrambler is to be used, the preferred procedure is the
V.38 procedure.
Under “Signalling to remote DCE“, select whether and in
what way transmission of the C/I signalling to the distant
end is to take place. If “CAS signalling“ was selected
here, the type of CAS transmission can be selected under
“Signal transmission“.

Click on the “Parameters for X/V Interface“ button to define

the characteristics of the X.21 interface.

Click on „Apply“ to send your settings to the NE.

© Siemens AG 2011
Page 128 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – X.21
The additional interface setting can be chosen here.

In the “Blocking state“ section, switch the port to

Click on „Apply“ to send your settings to the NE.

© Siemens AG 2011
Page 130 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – X.21
This register card provides the option of making statements
about the quality of data transmission. A test generator
located on the CPF2 can be connected to the different ports
to do this. For commissioning it is only necessary to ensure
that no text pattern options are checked. Click on „Apply“ to
send your settings to the NE.

© Siemens AG 2011
Page 131 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – X.21
Under “Alarm type“ a selection can be made for the port as
to whether a channel alarm is to be indicated as an urgent
alarm (A-alarm) or a non-urgent alarm
(C-alarm). The “Supervision of“ section defines the states of
the X.21 interface that lead to an alarm.
If a channel alarm at the port is detected (in accordance
with the previous settings) the settings made under “Alarm
state“ for receive and send data will be accepted.

Click on „Apply“ to send your settings to the NE.

The “Monitoring“ register card is not of significance for

commissioning the X.21 interface.
Only monitoring functions are provided here.

© Siemens AG 2011
Page 133 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – X.21
Checking the status of the available ports.

© Siemens AG 2011
Page 134 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2
Modules CIM-n×64V24, CIM-n×64V35, CIM-
n×64V36, CIM-n×64X21
Valid values Explanation:
None, Operation mode puts through 64-kbit/s time
slots between port A and port B

FM, Operation mode “digital conference”

A and B Operation mode drop channel operation of 64

kbit/s time slots on port A and port B

The following slides of the V.35 interface are representative

for all kinds of submodules.

The General slider gives information about the installed

Confirm your settings with “Apply”.

Repeat the process for all ports of the CPF2

© Siemens AG 2011
Page 136 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – V.35
There is also the option of scrambling the data. Two
different procedures (PCM and V.38) are supported here. If
a scrambler is to be used, the preferred procedure is the
V.38 procedure.
Under “Signalling to remote DCE“, select whether and in
what way transmission of the C/I signalling to the distant
end is to take place. If “CAS signalling“ was selected
here, the type of CAS transmission can be selected under
“Signal transmission“.

Click on the “Parameters for X/V Interface“ button to define

the characteristics of the V.35 interface.

© Siemens AG 2011
Page 137 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – V.35
The additional interface setting can be chosen here.

In the “Blocking state“ section, switch the port to

Click on „Apply“ to send your settings to the NE.

© Siemens AG 2011
Page 139 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – V.35
This register card provides the option of making statements
about the quality of data transmission. A test generator
located on the CPF2 can be connected to the different ports
to do this. For commissioning it is only necessary to ensure
that no text pattern options are checked.

Click on „Apply“ to send your settings to the NE.

© Siemens AG 2011
Page 140 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – V.35
Under “Alarm type“ a selection can be made for the port as
to whether a channel alarm is to be indicated as an urgent
alarm (A-alarm) or a non-urgent alarm
(C-alarm). The “Supervision of“ section defines the states of
the V.35 interface that lead to an alarm.
If a channel alarm at the port is detected (in accordance
with the previous settings) the settings made under “Alarm
state“ for receive and send data will be accepted.

Click on „Apply“ to send your settings to the NE.

The “Monitoring“ register card is not of significance for

commissioning the V.35 interface.
Only monitoring functions are provided here.

© Siemens AG 2011
Page 142 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – V.35
Checking the status of the available ports.

© Siemens AG 2011
Page 143 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2
Modules CIM-n×64V24, CIM-n×64V35, CIM-
n×64V36, CIM-n×64X21
Valid values Explanation:
None, Operation mode puts through 64-kbit/s time
slots between port A and port B

FM, Operation mode “digital conference”

A and B Operation mode drop channel operation of 64

kbit/s time slots on port A and port B

The following slides of the Ethernet interface are

representative for all kinds of submodules.

The General slider gives information about the installed

Confirm your settings with “Apply”.

Repeat the process for all ports of the CPF2

© Siemens AG 2011
Page 145 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – Ethernet
The WAN capacity for the Ethernet interface can be chosen.
Dependent of the free time slots up to 31 x 64 kbps can be
selected.

Click on „Apply“ to send your settings to the NE.

In the “Blocking state“ section, switch the port to

“unblocked“.
All other fields are for information only.

Click on „Apply“ to send your settings to the NE.

© Siemens AG 2011
Page 147 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – Ethernet
The “Pattern Generator“ register card is not of significance
for commissioning the Ethernet interface.

Only “Reset all counters” can be selected.

Click on „Apply“ to send your settings to the NE.

© Siemens AG 2011
Page 148 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – Ethernet
Under “Alarm type“ a selection can be made for the port as
to whether a channel alarm is to be indicated as an urgent
alarm (A-alarm) or a non-urgent alarm
(C-alarm). The “Supervision of“ section defines the states of
the Ethernet interface that lead to an alarm.
If a channel alarm at the port is detected (in accordance
with the previous settings) the settings made under “Alarm
state“ for receive and send data will be accepted.

Click on „Apply“ to send your settings to the NE.

The “Interface Ethernet“ register card is not of significance

for commissioning the Ethernet interface.
The Ethernet link state is displayed in the upper region
The Ethernet port settings can be found below.

The Ethernet ports can activated and deactivated here.

© Siemens AG 2011
Page 150 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2 – Ethernet
Checking the status of the available ports.

© Siemens AG 2011
Page 151 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2
Modules CIM-n×64V24, CIM-n×64V35, CIM-
n×64V36, CIM-n×64X21
Valid values Explanation
None, Operation mode puts through 64-kbit/s time
slots between port A and port B

FM, Operation mode “digital conference”

A and B Operation mode drop channel operation of 64

kbit/s time slots on port A and port B

© Siemens AG 2011
Page 152 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Commissioning the CPF2
Select one or more time slots of the port A or B according to the selected bit rate. Time slots which would collide are marked with X.
Bit rate 64 kbit/s: 1 time slot
Bit rate >64 kbit/s: the first (lowest) time slot, the other time slots are set to the neighbouring time slots automatically.

Choose the first time slot in this way, that there are enough free time slots.
Bit rate <64 kbit/s: the number of the required bits is offered on the first bit positions in the field “Bit positions”. Activate the bits. After this, the
bits can be set freely on position 1 to 8. Select the required time slot.
Repeat this settings for the other ports, so that all 8 positions of the time slot are set. (The “Apply” button only can be used, if the selected time
slot is filled with 8 bits.
Avoid a multiple occupation of the bit position per time slot. Bit positions already occupied are shown via the “Current setting” button.

The connection to a time slot can be deleted in the following way: select the time slot (marked) and after that none in the scroll-up window.
Than the time slot can be freely configured again.

Module CIM-nx64E
1. In the DCN View, select the network element FMX2R3 using the left mouse button
2. Open the equipment view via menu item ”View” → “Equipment View”
3. Select the digital line card CPF2
4. MENU ”Configuration” → “NE Configuration” → “General NE Parameters...”.
5. Open the register card “Connections”.
6. Select one or more time slots of the E1 port A and B according to the selected bit rate. Time slots which would collide are
marked with X.
Bit rate 64 kbit/s: 1 time slot
Bit rate >64 kbit/s: the first (lowest) time slot, the other time slots are set to the neighbouring time slots automatically.

RS232 Loopback Test plug

to use with 25 pin DB 25 male
Access panel adapter

DB 9 male
only with additional adapter

DB9 DB25 Function

1+4+6 6 + 8 + 20 DTR -> CD + DSR
2+3 2+3 Tx -> Rx
7+8 4+5 RTS ->CTS

X.21 Loopback Test plug DB 15 male

to use with 15 pin
Access panel adapter

DB15 Function
2+4 TxD+ -> RxD+
3+5 Ctrl+ -> Ind+
6+7 RxC+ -> TxC+
9 + 11 TxD- -> RxD-
10 + 12 Ctrl- -> Ind-
13 + 14 RxC- -> TxC-

Filter for selected View

Main window for Cross

Connections

Window for Conferences

Planning of time based actions

Creation of new Cross Connections

A new
connection
can be
started with
“create”

SISA (from the German SIgnalSAmmler or signal collector) is a data

communication system from the management system. Complex networks
require high performance management systems. Data communication is
required for information transfer to and from network elements, for example
alarm messages and measurement and control data. A network management
system consists of the following three basic elements:

 Network elements (NE)

 Operation system (OS) and
 data communication network (DCN) between NE and OS

The NE’s have a standardized interface to the management system SISA, the
QD2 interface. This interface follows the OSI reference model. QD2 contains
protocol for physical transmission (layer 1), error correction (layer 2), routing
(layer 3) as well as user protocol (layer 7).
© Siemens AG 2011
Page 181 Jun-11 Energy Automation Energy Sector
SISA Structure

The SISA networks has a hierarchical design.

At the top of the SISA network is an interface to connect to the operation

system. Up to 11 hierarchies can be implemented in SISA. The exchange
nodes are implemented by concentrator functions. An (almost) unlimited
number of NE’s can be connected to the SISA network. The practical
restriction results from the limited transmission speed of 64 kbps at the top of
the SISA network during transmission to the OS.

The bitrates used within the SISA network can vary from 1.2 kbps to 64 kbps.
This depends on the type of information transmission. In the most cases a
speed of 9.6 kbps is realised.

SISA-V is realization of concentrator function by a virtual bus system. The

SISA-V is realised most of the time by supervision unit modules.

The SISA consists of a bus system with a bus master performing the polling
function and up to 30 slaves. The restriction to up to 30 slaves per bus was
done because of the electrical characteristics of the RS485 bus.

Network elements always have the position of a slave at the QD2 bus. A
network node of the SISA network is a slave of a QD2 bus of the higher
network node, as well as the master of the NE or network nodes down the
hierarchy.

The physical ports at the NE are often labelled as:

 QD2-M for masterport and
 QD2-S for slaveport.
© Siemens AG 2011
Page 183 Jun-11 Energy Automation Energy Sector
SISA Structure

Server Ethernet

Client
Ethernet

RS232
SISA-GK/E
M
LCT QD2
S S S

NE NE NE
M M
QD2
S S S S

NE NE NE NE

ACI - SERVER
ETH

external

ETH

SISA-GK/E
F-Port QD2-M

external internal
external

RS232 QD2-S QD2-S QD2-S

ACI - LCT SUE CUD #2 CUD #9

QD2-M ECC ECC

external

external = cable
internal = backplane

ACI - SERVER
ETH

external

ETH

SISA-GK/E
F-Port QD2-M

external external
external

RS232 ECCx ECC QD2-S

2Mbit/s
ACI - LCT CUC 5/21 A/B CUD SUE
QD2-S QD2-S QD2-M

internal

external = cable
internal = backplane

ACI - SERVER
ETH

external

ETH

SISA-GK/E
F-Port QD2-M

external external
external

RS232 ECC3 ECC4 QD2-S

ACI - LCT CUC SUE

QD2-S QD2-M

internal

external = cable
internal = backplane

ACI - SERVER
ETH

external

ETH CUD not useable!

SISA-GK/E
F-Port QD2-M

external internal
external

RS232 QD2-S QD2-S

ACI - LCT CUC SUE

ECCx QD2-M

external

external = cable
internal = backplane

internal

QD2-S QD2-M
2Mbit/s
A/B CUD SUE
ECC QD2-S F-Port

external external

RS232

ACI - LCT

external = cable
internal = backplane

internal

QD2-S QD2-M
2Mbit/s
A/B CUC SUE
ECCx QD2-S F-Port

external external

RS232

ACI - LCT

external = cable
internal = backplane

ECCx = ECC1 or ECC2 or ECC3 or ECC4

Delay Time Primary

The operator can reduce the waiting time between the reply of a bus subscriber and the next call. Standard (3..5ms) or Short (1..3ms).
Poll Cycle Primary
In order to reduce calls to disconnected slaves to a minimum, the operator can define the Poll Cycle Primary. If optimized, the disconnected
slaves are called after 10 poll cycles or when no information between the master and the connected slave is transmitted.
Priority Polling
Priority Polling is used to achieve a higher data throughput to certain slaves. The operator can enable Priority Polling in the SISA-GK/E.
Possible values are: enabled or disabled.
If Priority Polling is enabled, the slave to which a high priority telegram is sent is polled more frequently than the others. In order to poll the
slave more frequently, the QD2 node addresses of the slave are entered into the priority poll list. Max. 3 QD2 node addresses can be entered
in the priority poll list for 30 seconds, which can be retriggered with the next high priority telegram to the same slave. The QD2 node addresses
in the poll list and those in the priority poll list are called in alternative order. Port a Filter
The Port a Filter of the SISA-GK/E checks received commands at the QD2 master port. If the Port a Filter is enabled, sending of commands
towards the OS is prohibited by the filte. Possible values are disabled or enabled.
© Siemens AG 2011
Page 191 Jun-11 Energy Automation Energy Sector
DCN - Master station with SISA-GK/E

Master station: Cable from SISA-GK/E to FMX2S

Internal
SISA-GK/E Cabling A1
QD2 (1)

2 - 2
DB 15 female 4 - 4 DB 15 female
9 - 9
11 - 11

SCN - SCN

Also change the shelf S301 settings from

Standalone!

Master station: FMX2S-Cable

Internal
B1 Cabling D1

2 - 4
DB 15 female 4 - 2 DB 15 female
9 - 11
11 - 9

SCN - SCN

Also change the shelf S301 settings from

Standalone!

Remote station: FMX2S-Cable

Internal
A1 Cabling D1

2 - 2
DB 15 female 4 - 4 DB 15 female
9 - 9
11 - 11

SCN - SCN

Remote station: SNUS-Cable (using ECC channel of CUD)

L2
Internal
A1 Cabling

2 - 12
DB 15 female 4 - 13 DB 25 female
9 - 24
11 - 25

SCN - SCN

© Siemens AG 2011
Page 195 Jun-11 Energy Automation Energy Sector
FMX2 R3.2 – Backup and Restore of the
Network Element Data
After commissioning of the system the data of the network elements must be saved by “Backup” to allow a reestablishment of them by
“Restore” if required. Each backup of a net element should be stored in an extra folder.

Save the Network Element Data

1. Mark the network element
2. Select: “Configuration” → “Software Management” → “NE Backup”
3. Select the folder for saving the data
4. Start the saving procedure
5. Wait until successful end of the recording.

Restore of the Network Element Data

1. Mark the network element
2. Select: “Configuration” → “Software Management” → “NE Restore”
3. Select the folder with the backup file
4. Start the saving procedure
5. Wait until successful end of the backup.

- Maintenance UMN MMN

The maintenance handbook describes all such measures as are necessary for
the rectification of faults which can be localized and rectified via the operator
terminals and the appropriate alarm signalling.
Following Sections are contained in the maintenance manual:
– Monitoring
– Maintenance
– Fault rectification

- Maintenance UMN MMN

The maintenance handbook describes all such measures as are necessary for
the rectification of faults which can be localized and rectified via the operator
terminals and the appropriate alarm signalling.
Following Sections are contained in the maintenance manual:
– Monitoring
– Maintenance
– Fault rectification

© Siemens AG 2011
Page 198 Jun-11 Energy Automation Energy Sector
Abbreviations
ACI Management System AccessIntegrator DDF Digital Distribution Frame
ADMN Administration Manual DEE Data Terminal Equipment (DTE)
ADPCM Adaptive Difference Pulse Code Modulation DIMX Drop/Insert Multiplexer
AIS Alarm Indication Signal DIVO Digital Local Exchange
Alzst Alarm state DMA Direct Memory Access
APS Application Software DSC Digital Signal Channel
ASA Alarm Collector DTE Data terminal Equipment
Asic Application Specific Integrated Circuit DÜE Data Transmission Equipment
ATM Asynchronous transfer mode E&M Earth and Minus
BER Bit Error Rate ECC Embedded Control Channel
BER34 Bit Error Rate 10E-3/-4 EEPROM Electrically Erasable Programmable Read Only Memory
BER56 Bit Error Rate 10E-5/-6 EGB Electrostatic discharge
CAMS CAM Shelf EIA Electronics Industries Association
CAS Channel Assigned Signalling EISA Extended Industry Standard Architecture
CATV Community Antenna Television EMC Electromagnetic Compatibility
CC Crossconnections ESD Electro Static Device
CC64k Cross-Connect64k ET Exchange Termination
CC-Bus Cross-Connect Bus ETS European Telecommunications Standard
CER Code Error Rate ETSI European telecommunication Standard Institute
CIM Customer Interface Module FA Foreign Connection
CMI Code Mark Inversion FAM Fan and Alarming Module
CMXC Crossconnect Multiplexer Compact FE Functional Unit (part of a NE)
CMXS CrossMux Shelf FEPROM Partially Alterable Several Times Read only Memory
COMPS2 Central FastLink Measurement and Power Supply FG Functional Group
CPF Line Card (channel processor card for fast data) FMX Flexible Multiplexer
CRC Cyclic Redundancy Check FMX2R3.2 Flexible Multiplexer (Second Generation) Release 3.2
CUA Central Unit FMX2S FMX2 Shelf
CUC Central Unit Cross-Connect FMX2V2 Flexible Multiplexer (Second Generation) Release 2
CUD Central unit Drop/Insert FO Fiber Optical
CV Code Violation FOC Failure of a Connection
DCE Data Communications Equipment (Data transmission Equipment) FPGA Field Programmable Gate Array
DCN Data Communication Network FSG Remote Power Feeding
© Siemens AG 2011
Page 200 Jun-11 Energy Automation Energy Sector
Abbreviations
FSG Remote Power Supply Unit LOF Loss of Frame
FTTB Fiber to the Building LOS Loss of Signal
FTTO Fiber to the Office LPTOL Laser Power Tolerance
FW Firmware LT Line Termination
FXO Foreign Exchange Office (SUB) LT2ME1 Line Terminating Unit 2 x E1
FXS Foreign Exchange Station (SLX) LTCOH Line Termination Unit for HDSL with Overhead Channel
G703sh G703sh LTO Line Termination Unit for Optical Fiber
GB Motherboard LTPM Line Termination PMXA
HDB3 High Density Bipolar of Order 3 LTx 2-Mbits Line Termination Unit
HDLC High Level Data Link Controller LUC Line Termination Unit Copper
HDSL High-Bit Rate Digital Subscriber Line LUCP Line Termination Unit for Copper with Power Feeding
HW Hardware LUCT Line Termination Unit for Copper with Power Feeding
IEC International Electrotechnical Commission LUOt Optical Line Termination Unit
IF Interface LVTOL
INT Internal Alarm LWL Optical Fiber Cable
IR Intermediate Regenerator MDF Main Distribution Frame
ISDN Integrated Service Digital network MTA Metallic Test Access
ITMN Installation and Test Manual MUX Multiplexer
ITU-T International Telecommunication Union MXS19C 19-inch Multiplexer Shelf
KP Channel in Service NCT Network Craft Terminal
LAN Local Area Network NE Network Element
LC Line Card NMS Network Management System
LCA Line Card Analog NRZ Non Return to Zero
LCD Line Card Digital NT Network Termination
LCI Line Card ISDN NT22OP Network Termination 2 x 2 Mbit/s Optical
LCT Local Craft Terminal NT22OV Network Termination 2 x 2 Mbit/s Optical
LE Line Terminating Equipment NTBA Network Termination Basic Access
LED Light Emitting Diode NTPM Network Termination PMXA
LIC Line Interface Controller NTU Network terminal Unit
LL Local Loop OAB Overhead Access Bus
LLA Analog Leased Line OB Local Battery
LOC Loss of Clock ODF Optical Distribution Frame
© Siemens AG 2011
Page 201 Jun-11 Energy Automation Energy Sector
Abbreviations
ODT Optical Distant Termination PSFAIL Power Supply Failure
OF Optical Fiber PSTOL Power Supply Tolerance
OH Overhead Channel PU Port Unit
OLT Optical line termination QD2 Network Management Protocol
OLT Optical Line Termination QD2 Standard Interface to TMN
OMIC Optical Multiplexer Integrated Circuit QD2-M QD2-Masterport
OMIX Open Module Interface for xDSL QD2-S QD2-Slaveport
OMN Operating Manual RAM Random-Access Memory
OMX16 Optical Line Equipment 16 x 2 Mbit/s RL Remote Loop
OMX16S OMX16 Shelf ROM Reals-Only Memory
OMX2S2 HMX/OMX2 Shelf RPS Remote Power Supply for HDB3 Line Section
OMXLS OMX16 Shelf RTC Real Time Clock
ONU Optical Network Unit RTU Remote Test Equipment
OS Operation System RZ Return to Zero
OSU Operation and Supervision Units S2M ISDN 2-Mbit/s-Interface, Subscriber Side
OTSU2M Optical Terminal Supervision Unit with 2-Mbit/s QD2 Interface S-APS System APS
OVH Overhead SCSI Small Computer System Interface
OVP Over-Voltage Protection SDH Synchronous Digital Hierarchy
OVRX Overflow Receiver SDSL4oP Module with 4-wire SHDSL Interface without RPS
OVTX Overflow Transmitter SDSLmP Module with SHDSL Interface and RPS
P-APS Partial APS SDSLoP Module with SHDSL Interface without RPS
PBX Private Branch Exchange SHDSL Symmetric High-Bit Rate Digital Subscriber Line
PCB Printed Circuit Board SISA Supervisory and Information System for local Areas
PCI Peripheral Core Interface SISA0
PCM Pulse Code Modulation SISAK SISA-Concentrator
PDH Plesiochrones Digital Hierarchy SISA-V Virtual SISA Concentrator
PE Parity Error SLX Subscriber Line Unit Exchange Side
PLL Phase Locked Loop SMX Synchronous multiplexer
PMXA Primary Multiplex Access SMX1 Synchronous Multiplexer for STM-1
PNV Program not valid SMX4c Synchronous Multiplexer for STM-4
POTS Plain Old Telephone Service SMXLS SMX Shelf
PROM Programmable Read-Only Memory SNC Synchronous Network Connection
© Siemens AG 2011
Page 202 Jun-11 Energy Automation Energy Sector
Abbreviations
SNMP Simple Network Management Protocol V2M ISDN 2-Mbit/s-Interface, Exchange Side
SNU Service Network Unit Vst Exchange
SNUS Service Network Unit Shelf ZA(A) Urgent Alarm
SRU SHDSL Regenerator Unit ZA(B) Non-Urgent Alarm
STFAIL Self Test Failure ZBBeo Central Observation Equipment
STM Synchronous Transfer Mode ZWR Intermediate Regenerator
STM-1 Synchronous Transport Module Level 1
STM-4 Synchronous Transport Module Level 4
STU Network Termination Unit
SUB Subscriber Line Unit (Subscriber Side)
SUE Supervision Unit
SV Power Supply
SVB Supervision Bus
SW Software
SYN Failure of Synchronization
T4 Reference Clock T4
TAC Technical Assistance Center
TDM Time Division Multiplexer
TE Terminal Equipment
TM Transmission Module
TMN Telecommunication Management Network
TMX Terminal Multiplexer
TOS Top of Station
TS Time Slot
TU Tributary Unit of SMX1/4c
UART Universal Asynchrony Receiver
UG2 Module with optical Ug2 Interface
UK2mP Module with Uk2 Interface and RPS
ULAF+ Universal Line Equipment Access Family
UMN User Manual
UMX2S AMXC Shelf
UMXLS Feeder Shelf
© Siemens AG 2011
Page 203 Jun-11 Energy Automation Energy Sector
MXS19C – X101 Connector
Central Alarm Alarm Input
A B C A B C
1 1
2 QD2Sin_b1 QD2Sin_a1 QD2Tin_a1 2 QD2Sin_b1 QD2Sin_a1 QD2Tin_a1
3 ZAA_210 ZAB_210 3 ZAA_210 ZAB_210
4 QD2Sout_b1 QD2Sout_a1 QD2Tin_b1 4 QD2Sout_b1 QD2Sout_a1 QD2Tin_b1
5 ZAA_211 ZAB_211 5 ZAA_211 ZAB_211
6 QD2Sin_b2 QD2Sin_a2 QD2Tout_a1 6 QD2Sin_b2 QD2Sin_a2 QD2Tout_a1
7 ZAB_201 7 ZAB_201 GND Operating ground
8 QD2Sout_b2 QD2Sout_a2 QD2Tout_b1 8 QD2Sout_b2 QD2Sout_a2 QD2Tout_b1 GND-S Shielded ground
QD2Sin_a1, b1 Slave 1 of the SUE
9 RA_211(ECC) RB_211(ECC) 9 RA_211(ECC) RB_211(ECC)
QD2Sout_a1, b1
10 O64out_a_202 O64in_a_202 QD2Tin_a2 10 O64out_a_202 O64in_a_202 QD2Tin_a2 QD2Sin_a2, b2 Slave 2 of the SUE
11 O64out_b_203 O64in_b_203 11 O64out_b_203 O64in_b_203 QD2Sout_a2, b2
12 Qin_b Qin_a QD2Tin_b2 12 Qin_b Qin_a QD2Tin_b2 Qin_a, b Master of the SUE
13 QD2_MCLK_a QD2_MCLK_b 13 QD2_MCLK_a QD2_MCLK_b Qout_a, b
14 Qout_b Qout_a QD2Tout_a2 14 Qout_b Qout_a QD2Tout_a2 QD2_MCLK_a, b Master Clock
QD2Tin_a, b T connections of slave1
15 O64out_b_202 O64in_b_202 15 O64out_b_202 O64in_b_202
from the SUE
16 PB0 PB1 QD2Tout_b2 16 PB0 PB1 QD2Tout_b2 QD2Tout_a, b
17 17 A1P to A8P Alarm inputs of the SUE
18 PB2 PB3 A1P 18 PB2 PB3 A1P AM Negative operating voltage
19 19 for alarm contacts
20 RA_210(ECC) RB_210(ECC) A2P 20 RA_210(ECC) RB_210(ECC) A2P T4out_a, b_210/211 T4 output from the CUD
plug-in places 210 and 211
21 21
T3in_a,b (input) T3in1 input to the CUDs and LTx
22 TA_210(ECC) TB_210(ECC) A3P 22 TA_210(ECC) TB_210(ECC) A3P ZAA_210/211 Central alarming, urgent of CUD
23 23 plug-in places 210 and 211
24 TA_211(ECC) TB_211(ECC) A4P 24 TA_211(ECC) TB_211(ECC) A4P ZAB_210/211 Central alarming, non-urgent of CUD
25 T4out_a_211 O64out_a_203 25 T4out_a_211 O64out_a_203 plug-in places 210 and 211
26 A5P 26 A5P ZAB_201 Central alarming, non-urgent of SUE
27 T4out_b_211 O64in_a_203 plug-in place 201
27 T4out_b_211 O64in_a_203
O64in_a,b_202/203 Overhead LTx plug-in places 202/203
28 A6P 28 A6P
O64out_a,b_202/203
29 T4out_a_210 T3in_a 29 T4out_a_210 T3in_a RA, RB_210/211 ECC input of CUD,
30 A7P 30 A7P plug-in places 210 and 211
31 T4out_b_210 T3in_b AM 31 T4out_b_210 T3in_b AM TA, TB_210/211 ECC output of CUD,
32 GND A8P 32 GND A8P plug-in places 210 and 211

© Siemens AG 2011
Page 204 Jun-11 Energy Automation Energy Sector
MXS19C – X101 Connector
ECC QD2-Master-Slave
A B C A B C
1 1
2 QD2Sin_b1 QD2Sin_a1 QD2Tin_a1 2 QD2Sin_b1 QD2Sin_a1 QD2Tin_a1
3 ZAA_210 ZAB_210 3 ZAA_210 ZAB_210
4 QD2Sout_b1 QD2Sout_a1 QD2Tin_b1 4 QD2Sout_b1 QD2Sout_a1 QD2Tin_b1
5 ZAA_211 ZAB_211 5 ZAA_211 ZAB_211
6 QD2Sin_b2 QD2Sin_a2 QD2Tout_a1 6 QD2Sin_b2 QD2Sin_a2 QD2Tout_a1
7 ZAB_201 7 ZAB_201 GND Operating ground
8 QD2Sout_b2 QD2Sout_a2 QD2Tout_b1 8 QD2Sout_b2 QD2Sout_a2 QD2Tout_b1 GND-S Shielded ground
9 RA_211(ECC) RB_211(ECC) QD2Sin_a1, b1 Slave 1 of the SUE
9 RA_211(ECC) RB_211(ECC)
QD2Sout_a1, b1
10 O64out_a_202 O64in_a_202 QD2Tin_a2 10 O64out_a_202 O64in_a_202 QD2Tin_a2 QD2Sin_a2, b2 Slave 2 of the SUE
11 O64out_b_203 O64in_b_203 11 O64out_b_203 O64in_b_203 QD2Sout_a2, b2
12 Qin_b Qin_a QD2Tin_b2 12 Qin_b Qin_a QD2Tin_b2 Qin_a, b Master of the SUE
13 QD2_MCLK_a QD2_MCLK_b 13 QD2_MCLK_a QD2_MCLK_b Qout_a, b
14 Qout_b Qout_a QD2Tout_a2 14 Qout_b Qout_a QD2Tout_a2 QD2_MCLK_a, b Master Clock
15 O64out_b_202 O64in_b_202 QD2Tin_a, b T connections of slave1
15 O64out_b_202 O64in_b_202
from the SUE
16 PB0 PB1 QD2Tout_b2 16 PB0 PB1 QD2Tout_b2 QD2Tout_a, b
17 17 A1P to A8P Alarm inputs of the SUE
18 PB2 PB3 A1P 18 PB2 PB3 A1P AM Negative operating voltage
19 19 for alarm contacts
20 RA_210(ECC) RB_210(ECC) A2P 20 RA_210(ECC) RB_210(ECC) A2P T4out_a, b_210/211 T4 output from the CUD
21 plug-in places 210 and 211
21
T3in_a,b (input) T3in1 input to the CUDs and LTx
22 TA_210(ECC) TB_210(ECC) A3P 22 TA_210(ECC) TB_210(ECC) A3P ZAA_210/211 Central alarming, urgent of CUD
23 23 plug-in places 210 and 211
24 TA_211(ECC) TB_211(ECC) A4P 24 TA_211(ECC) TB_211(ECC) A4P ZAB_210/211 Central alarming, non-urgent of CUD
25 T4out_a_211 O64out_a_203 25 T4out_a_211 O64out_a_203 plug-in places 210 and 211
26 A5P 26 A5P ZAB_201 Central alarming, non-urgent of SUE
27 T4out_b_211 O64in_a_203 27 T4out_b_211 O64in_a_203 plug-in place 201
28 A6P O64in_a,b_202/203 Overhead LTx plug-in places 202/203
28 A6P
O64out_a,b_202/203
29 T4out_a_210 T3in_a 29 T4out_a_210 T3in_a RA, RB_210/211 ECC input of CUD,
30 A7P 30 A7P plug-in places 210 and 211
31 T4out_b_210 T3in_b AM 31 T4out_b_210 T3in_b AM TA, TB_210/211 ECC output of CUD,
32 GND A8P 32 GND A8P plug-in places 210 and 211

© Siemens AG 2011
Page 205 Jun-11 Energy Automation Energy Sector
MXS19C – X101 Connector
Clock Overhead
A B C A B C
1 1
2 QD2Sin_b1 QD2Sin_a1 QD2Tin_a1 2 QD2Sin_b1 QD2Sin_a1 QD2Tin_a1
3 ZAA_210 ZAB_210 3 ZAA_210 ZAB_210
4 QD2Sout_b1 QD2Sout_a1 QD2Tin_b1 4 QD2Sout_b1 QD2Sout_a1 QD2Tin_b1
5 ZAA_211 ZAB_211 5 ZAA_211 ZAB_211
6 QD2Sin_b2 QD2Sin_a2 QD2Tout_a1 6 QD2Sin_b2 QD2Sin_a2 QD2Tout_a1
7 ZAB_201 7 ZAB_201 GND Operating ground
8 QD2Sout_b2 QD2Sout_a2 QD2Tout_b1 8 QD2Sout_b2 QD2Sout_a2 QD2Tout_b1 GND-S Shielded ground
9 RA_211(ECC) RB_211(ECC) 9 RA_211(ECC) RB_211(ECC) QD2Sin_a1, b1 Slave 1 of the SUE
QD2Sout_a1, b1
10 O64out_a_202 O64in_a_202 QD2Tin_a2 10 O64out_a_202 O64in_a_202 QD2Tin_a2
QD2Sin_a2, b2 Slave 2 of the SUE
11 O64out_b_203 O64in_b_203 11 O64out_b_203 O64in_b_203 QD2Sout_a2, b2
12 Qin_b Qin_a QD2Tin_b2 12 Qin_b Qin_a QD2Tin_b2 Qin_a, b Master of the SUE
13 QD2_MCLK_a QD2_MCLK_b 13 QD2_MCLK_a QD2_MCLK_b Qout_a, b
14 Qout_b Qout_a QD2Tout_a2 14 Qout_b Qout_a QD2Tout_a2 QD2_MCLK_a, b Master Clock
15 O64out_b_202 O64in_b_202 15 O64out_b_202 O64in_b_202 QD2Tin_a, b T connections of slave1
from the SUE
16 PB0 PB1 QD2Tout_b2 16 PB0 PB1 QD2Tout_b2
QD2Tout_a, b
17 17 A1P to A8P Alarm inputs of the SUE
18 PB2 PB3 A1P 18 PB2 PB3 A1P AM Negative operating voltage
19 19 for alarm contacts
20 RA_210(ECC) RB_210(ECC) A2P 20 RA_210(ECC) RB_210(ECC) A2P T4out_a, b_210/211 T4 output from the CUD
21 21 plug-in places 210 and 211
22 TA_210(ECC) TB_210(ECC) A3P 22 TA_210(ECC) TB_210(ECC) A3P T3in_a,b (input) T3in1 input to the CUDs and LTx
ZAA_210/211 Central alarming, urgent of CUD
23 23
plug-in places 210 and 211
24 TA_211(ECC) TB_211(ECC) A4P 24 TA_211(ECC) TB_211(ECC) A4P ZAB_210/211 Central alarming, non-urgent of CUD
25 T4out_a_211 O64out_a_203 25 T4out_a_211 O64out_a_203 plug-in places 210 and 211
26 A5P 26 A5P ZAB_201 Central alarming, non-urgent of SUE
27 T4out_b_211 O64in_a_203 27 T4out_b_211 O64in_a_203 plug-in place 201
28 A6P 28 A6P O64in_a,b_202/203 Overhead LTx plug-in places 202/203
O64out_a,b_202/203
29 T4out_a_210 T3in_a 29 T4out_a_210 T3in_a
RA, RB_210/211 ECC input of CUD,
30 A7P 30 A7P plug-in places 210 and 211
31 T4out_b_210 T3in_b AM 31 T4out_b_210 T3in_b AM TA, TB_210/211 ECC output of CUD,
32 GND A8P 32 GND A8P plug-in places 210 and 211

A B C
1 F2_a1
2 F2_b1
3 F2_a2
4 F2_b2
5
6
7 F2_a3
8 F2_b3
9
10
11 F2_a4
12 F2_b4
13 F2_a5
14 F2_b5
15
16
17
18
19 F2_a6
20 F2_b6
21
22
23 F2_a7
24 F2_b7
25 F2_a8
26 F2_b8
27
28
29 F2_a9
30 F2_b9
31 F2_a10 F2_a1 to F2_a10 Interface analog 1 to 10, a wire
32 F2_b10 F2_b1 to F2_b10 Interface analog 1 to 10, b wire

A B C
1 SB_a1
2 SB_b1
3 SB_a2
4 SB_b2
5
6
7 SB_a3
8 SB_b3
9
10
11 SB_a4
12 SB_b4
13 SB_a5
14 SB_b5
15
16
17
18
19 SB_a6
20 SB_b6
21
22
23 SB_a7
24 SB_b7
25 SB_a8
26 SB_b8
27
28
29 SB_a9
30 SB_b9
31 SB_a10 SB_a1 to 10 Data signals a1 to a10
32 SB_b10 SB_b1 to 10 Data signals b1 to b10

A B C
1 D2outa1 D2ina1
2 D2outb1 D2inb1
3 D2outa2 D2ina2
4 D2outb2 D2inb2
5
6
7 D2outa3
8 D2outb3
9 D2ina3
10 D2inb3
11 D2outa4
12 D2outb4
13 D2outa5 D2ina4
14 D2outb5 D2inb4
15
16
17 D2ina5
18 D2inb5
19 D2outa6 D2ina6
20 D2outb6 D2inb6
21
22
23 D2outa7 D2ina7
24 D2outb7 D2inb7
25 D2outa8 D2ina8
26 D2outb8 D2inb8
27
28
29 D2outa9 D2ina9 D2outa(no.) Data signal, a wire (channel -no.); outgoing
30 D2outb9 D2inb9 D2outb(no.) Data signal, b wire (channel -no.); outgoing
31 D2outa10 D2ina10 D2ina(no.) Data signal, a wire (channel -no.); incoming
32 D2outb10 D2inb10 D2inb(no.) Data signal, b wire (channel -no.); incoming

A B C
1 X11,103 X21, 103
2 X11, 108.2 X21, 108.2
3 X11, 105 X21, 105
4 X11, 109 X21, 109
5 GND GND
6
7 X11, 104 X22, 107
8 X11, 106 X22, 140
9 X21, 104
10 X21, 106
11 X11, 113
12 X11, 141
13 X11, 107 X21, 113
14 X11, 140 X21, 141
15 X12, 107 X22, 115
16 X12, 140 X22, 114
17 X12, 115 X21, 107
18 X12, 114 X21, 140
19 X11, 115 X21, 115
20 X11, 114 X21, 114
21
22
23 X12, 104 X22, 104 103 TXD Transmitted data
24 X12, 106 X22, 106 104 RXD Received data
113 TCK Transmitter signal element timing (DTE)
25 X12, 103 X22, 103
114 XCK Transmitter signal element timing (DCE)
26 X12, 108.2 X22, 108.2 115 RCK Receiver Signal Element Timing (DCE)
27 X11 Interface 1 105 RTS Request to Send
28 106 CTS Ready for Sending
29 X12, 105 X22, 105 X12 Interface 2 107 DSR Data Set Ready
30 X12, 109 X22, 109 108.2 DTR Data Terminal Ready
X21 Interface 3 109 DCD Data Channel Received Line Signal Detector
31 X12, 113 X22, 113
140 Loopback/Maintenance Test
32 X12, 141 X22, 141 X22 Interface 4 141 Local Loopback

© Siemens AG 2011
Page 210 Jun-11 Energy Automation Energy Sector
Connector – CUD
CUD plug-in places 210 and 211
A B C
1
2 RA (ECC) E1inA_b E1inA_a
3
4 RB (ECC) E1outA_b E1outA_a
5
6 SA6out_a T4out_b T4out_a
7
8 SA6out_b E1inB_b E1inB_a
9
10 Plug_210/Plug_211 SA5out_b SA5out_a
11
12 SA7out_b SA7out_a
13
14 QD2Sout_b QD2Sout_a
15
16 SA8out_b SA8out_a
17
18 E1outB_b E1outB_a
19
20 TA (ECC) SA5in_b SA5in_a E1outA/B_a/b 2-Mbit/s transmit signal port A/B, a- and b wire
21 E1inA/B_a/b 2-Mbit/s receive signal port A/B, a- and b wire
22 TB (ECC) SA7in_b SA7in_a GND Internal ground
23 QD2Sout_a/b Transmit signal, slave port, a- and b wire
24 SA8in_a QD2Sin_b QD2Sin_a QD2Sin_a/b Receive signal, slave port, a- and b wire
25 RA/RB ECC interface, transmit signal, a- and b wire
26 SA8in_b SA6in_b SA6in_a SAxout/in_a/b Transmit signal/receive signal SAx, a- and b wire
27 TA ECC interface, receive signal, a wire
28 T3in_b T3in_a TB ECC interface, receive signal, b wire
29 RA ECC interface, transmit signal, a wire
30 RB ECC interface, transmit signal, b wire
31 T4out_a/b Outgoing 2048-kHz clock, a- and b wire
32 T3in_a/b Incoming 2048-kHz clock, a- and b wire

© Siemens AG 2011
Page 211 Jun-11 Energy Automation Energy Sector
Connector – SISAK
SISAK plug-in place 218
A B C
1
2 UP GND2 S1D1outV
3
4 S1D1inV S1D1inb S1D1ina
5 GND Ground
6 GND1 S1D1outb S1D1outa GND1 Signal ground
7
GND2 Ground (-60 V)
8 S1D2inV S1D2inb S1D2ina
MDyoutRa Master data y (port) out RS485 wire a
9
MDyoutRb Master data y (port) out RS485 wire b
10 S1D2outV S1D2outb S1D2outa
MDyinRa Master data y (port) in RS485 wire a
11
MDyinRb Master data y (port) in RS485 wire b
12 S2D1inV S2D1inb S2D1ina
MDyoutV Master data y (port) out V.28
13
MDyinV Master data y (port) in V.28
14 S2D1outV S2D1outb S2D1outa
15 MT Master clock
16 S2D2inV S2D2inb S2D2ina MTRa Master clock in RS485 wire a
17 MTRb Master clock in RS485 wire b
18 S2D2outV S2D2outb S2D2outa MTV Master clock in V.28
19 RXD Unsymmetrical receive (data)
20 MD1inV MD1inRb MD1inRa S1T Slave clock 1
21 S2T Slave clock 2
22 MD1outV MD1outRb MD1outRa SxDyina Slave x data y (port) in RS485/G.703 wire a
23 SxDyinb Slave x data y (port) in RS485/G.703 wire b
24 MD2inV MD2inRb MD2inRa SxDyouta Slave x data y (port) out RS485/G.703 wire a
25 SxDyoutb Slave x data y (port) out RS485/G.703 wire b
26 MD2outV MD2outRb MD2outRa SxDyinV Slave x data y (port) in V.28
27 SxDyoutV Slave x data y (port) out V.28
28 S1TV S1TRb S1TRa SxTra Slave x data in RS485/G.703 wire a
29 SxTrb Slave x data in RS485/G.703 wire b
30 S2TV S2TRb S2TRa SxTV Slave x data in V.28
31
TXD Unsymmetrical transmit (data)
32 MTV MTRb MTRa
UP Primary voltage

FOX61x TDM Services: User Manual
No ratings yet
FOX61x TDM Services: User Manual
158 pages
Data Sheet SDH Interfaces
No ratings yet
Data Sheet SDH Interfaces
4 pages
00-2 About This Document
No ratings yet
00-2 About This Document
13 pages
SURPASS HiT 7060 Technical Manual
100% (5)
SURPASS HiT 7060 Technical Manual
150 pages
Ruggednms User Guide
No ratings yet
Ruggednms User Guide
236 pages
Sted User Manual
No ratings yet
Sted User Manual
91 pages
Foxboro Evo™ Process Automation System: Product Specifications
No ratings yet
Foxboro Evo™ Process Automation System: Product Specifications
20 pages
Maintenance: Flexible Multiplexer FMX2R3.2 Umn:Mmn
No ratings yet
Maintenance: Flexible Multiplexer FMX2R3.2 Umn:Mmn
26 pages
Installation and Test Manual (ITMN) : A42022-L5972-G052-01-7630 Issue: 1 Issue Date: October 2011
100% (1)
Installation and Test Manual (ITMN) : A42022-L5972-G052-01-7630 Issue: 1 Issue Date: October 2011
155 pages
NetRing2500S Brochure
No ratings yet
NetRing2500S Brochure
3 pages
Data Sheet Subracks of The Hybrid Multi-Service Platform XMC20 For Ethernet With MPLS-TP and Legacy Services XMC22 XMC23 XMC25 PDF
No ratings yet
Data Sheet Subracks of The Hybrid Multi-Service Platform XMC20 For Ethernet With MPLS-TP and Legacy Services XMC22 XMC23 XMC25 PDF
2 pages
1 - 194 - ETL600 R4 - Universal Digital Power Line Carrier
No ratings yet
1 - 194 - ETL600 R4 - Universal Digital Power Line Carrier
8 pages
Um Umux Cables
No ratings yet
Um Umux Cables
154 pages
UMX User Manual
No ratings yet
UMX User Manual
78 pages
Foxman Un
100% (1)
Foxman Un
6 pages
Coriant Hit7025
No ratings yet
Coriant Hit7025
92 pages
OptiX OSN 1800V Packet Service Configuration Practice Guide
No ratings yet
OptiX OSN 1800V Packet Service Configuration Practice Guide
48 pages
Siemens Surpass7025
No ratings yet
Siemens Surpass7025
2 pages
Siemens - TransXpress - SMA1K PDF
No ratings yet
Siemens - TransXpress - SMA1K PDF
3 pages
TAINET Rack-Mounted Modem Shelf (TRS32) USER'S MANUAL
No ratings yet
TAINET Rack-Mounted Modem Shelf (TRS32) USER'S MANUAL
32 pages
ETL600 R4 Level - 2.2 Lowres
No ratings yet
ETL600 R4 Level - 2.2 Lowres
4 pages
Mux General Tech Description PDF
100% (1)
Mux General Tech Description PDF
212 pages
01-03 Configuring Ethernet Services
100% (2)
01-03 Configuring Ethernet Services
65 pages
Tellabs6310 Datasheet
No ratings yet
Tellabs6310 Datasheet
2 pages
Technical Data FinalABBETL600
No ratings yet
Technical Data FinalABBETL600
4 pages
OptiX OSN 1800V MPLS - TP OAM Configuration and Maintenance (NCE) (G12183138 - OTHZH A)
No ratings yet
OptiX OSN 1800V MPLS - TP OAM Configuration and Maintenance (NCE) (G12183138 - OTHZH A)
17 pages
FOX61x Leco1: User Manual
No ratings yet
FOX61x Leco1: User Manual
50 pages
HiT Training Presentation-2
67% (3)
HiT Training Presentation-2
97 pages
Huawei Opti OSN Equipment Command Line Introduction: Internal
100% (1)
Huawei Opti OSN Equipment Command Line Introduction: Internal
48 pages
E1 To Ethernet 10
No ratings yet
E1 To Ethernet 10
4 pages
Transmode TS Series 6p A
No ratings yet
Transmode TS Series 6p A
6 pages
Part 1
No ratings yet
Part 1
434 pages
Siemens FMX 3
100% (2)
Siemens FMX 3
90 pages
Transmode DS - TM - EMXP - B PDF
No ratings yet
Transmode DS - TM - EMXP - B PDF
2 pages
BR Apollo Family
No ratings yet
BR Apollo Family
9 pages
Abb Fox Synchronisation r8 RC 1khw002008
No ratings yet
Abb Fox Synchronisation r8 RC 1khw002008
132 pages
OMS846 TechnicalDescription
No ratings yet
OMS846 TechnicalDescription
21 pages
PTN NEC MN5100 Brochure Issue2.0 Mar29 2010
No ratings yet
PTN NEC MN5100 Brochure Issue2.0 Mar29 2010
2 pages
STM-1, 63 E1 (Optical / Electrical) Add-Drop SDH Multiplexer
No ratings yet
STM-1, 63 E1 (Optical / Electrical) Add-Drop SDH Multiplexer
4 pages
OptiX WDM System Index Test ISSUE1.1
No ratings yet
OptiX WDM System Index Test ISSUE1.1
26 pages
CHP594 - FOXMAN-UN Network Management System As Administrator
100% (1)
CHP594 - FOXMAN-UN Network Management System As Administrator
2 pages
Umux 1500 1200 e
100% (1)
Umux 1500 1200 e
2 pages
Hit 7300
No ratings yet
Hit 7300
2 pages
Dense Wavelength Division Multiplexing
No ratings yet
Dense Wavelength Division Multiplexing
34 pages
FIBCOM 6310 Edge Node: Product Description
No ratings yet
FIBCOM 6310 Edge Node: Product Description
13 pages
Brochure DynaFlex
No ratings yet
Brochure DynaFlex
4 pages
07 NG WDM Equipment Networking and Applications
No ratings yet
07 NG WDM Equipment Networking and Applications
44 pages
Am3440 20100429
100% (1)
Am3440 20100429
111 pages
Nokia Teleprotection Ebook FINAL 052517
No ratings yet
Nokia Teleprotection Ebook FINAL 052517
11 pages
BG Product Li
No ratings yet
BG Product Li
90 pages
Voice over LTE Standard Requirements
From Everand
Voice over LTE Standard Requirements
Gerardus Blokdyk
3/5 (1)
DeviceNet The Ultimate Step-By-Step Guide
From Everand
DeviceNet The Ultimate Step-By-Step Guide
Gerardus Blokdyk
No ratings yet
03 FA31323EN32GA0 fmx2 PDF
No ratings yet
03 FA31323EN32GA0 fmx2 PDF
50 pages
03 FA31323EN32GA0 fmx2 PDF
100% (1)
03 FA31323EN32GA0 fmx2 PDF
50 pages
Datasheet FMX PDF
No ratings yet
Datasheet FMX PDF
2 pages
Connection Master
No ratings yet
Connection Master
8 pages
UMUX Product Overview
No ratings yet
UMUX Product Overview
12 pages
Sagem FMX
No ratings yet
Sagem FMX
2 pages
Fmux03 4e1 Man
No ratings yet
Fmux03 4e1 Man
31 pages
Ethernet Basics Master Class
100% (1)
Ethernet Basics Master Class
50 pages
Dissolved Gas Analysis: The Health Indicator For Oil Immersed Transformers
No ratings yet
Dissolved Gas Analysis: The Health Indicator For Oil Immersed Transformers
62 pages
Exporting Importing Point Descriptions - Copie
No ratings yet
Exporting Importing Point Descriptions - Copie
2 pages
PRPI-019 D20 - D200 Technical Overview
100% (1)
PRPI-019 D20 - D200 Technical Overview
106 pages
1 - BCU Mounting and Replacement
No ratings yet
1 - BCU Mounting and Replacement
34 pages
IBS-Tool / Web Monitor Installation and Configuration Under Windows XP 1. Modem Installation
No ratings yet
IBS-Tool / Web Monitor Installation and Configuration Under Windows XP 1. Modem Installation
15 pages
MS1-7404 00 Reference Manual Triadjust2
No ratings yet
MS1-7404 00 Reference Manual Triadjust2
62 pages
3868 en Tebe Mcu Monitor (A0564990)
No ratings yet
3868 en Tebe Mcu Monitor (A0564990)
42 pages
Readme V4.02
No ratings yet
Readme V4.02
2 pages
Note D'Etude / Technical Document: Titre / Title
No ratings yet
Note D'Etude / Technical Document: Titre / Title
11 pages
En100 Iec61850
No ratings yet
En100 Iec61850
150 pages
1KHW002589 - E Firmware Download For ETL600R4
No ratings yet
1KHW002589 - E Firmware Download For ETL600R4
7 pages
Allen Bradley - Switch Ethernet - Fibras Stratix 5400 Manual
No ratings yet
Allen Bradley - Switch Ethernet - Fibras Stratix 5400 Manual
18 pages
SF LAN Network Units TD T811123 en e
No ratings yet
SF LAN Network Units TD T811123 en e
66 pages
GEH-6721 Vol II
100% (2)
GEH-6721 Vol II
720 pages
Mugen Computindo: Updated Pricelist For Parts Makassar, 16 January 2016
No ratings yet
Mugen Computindo: Updated Pricelist For Parts Makassar, 16 January 2016
7 pages
Datasheet Media Converter
100% (1)
Datasheet Media Converter
3 pages
Computer Networks PDF
100% (1)
Computer Networks PDF
35 pages
IE SW EL08 8GTPOE - en
No ratings yet
IE SW EL08 8GTPOE - en
4 pages
Mod 3
No ratings yet
Mod 3
69 pages
Ie 2000 8t67p G e Datasheet
No ratings yet
Ie 2000 8t67p G e Datasheet
4 pages
User Manual PT 3 2995389 PDF
No ratings yet
User Manual PT 3 2995389 PDF
40 pages
4 Ethernet
No ratings yet
4 Ethernet
18 pages
Chapter5 6 MC TF Questions
No ratings yet
Chapter5 6 MC TF Questions
5 pages
User Manual 2 BDU PDF
No ratings yet
User Manual 2 BDU PDF
80 pages
PLT 04233 A.3 Hid Aero x1100 Installation Guide
100% (1)
PLT 04233 A.3 Hid Aero x1100 Installation Guide
8 pages
Reducing Boot Time Techniques For Fast Booting
No ratings yet
Reducing Boot Time Techniques For Fast Booting
2 pages
Product Manual: AN5506-01-A GPON Optical Network Terminal
No ratings yet
Product Manual: AN5506-01-A GPON Optical Network Terminal
44 pages
INFO EMEA Micro 5 PXN PDF
No ratings yet
INFO EMEA Micro 5 PXN PDF
1 page
800xa Outline - Networks
No ratings yet
800xa Outline - Networks
5 pages
Catalogue Hikvision Retail 2022
No ratings yet
Catalogue Hikvision Retail 2022
24 pages
HAEFELY LL HiAS744 170821 BROCHURE
No ratings yet
HAEFELY LL HiAS744 170821 BROCHURE
12 pages
DES-F1018P-16 100Mbps 250m PoE + 1 Gigabit and 1 Combo Uplink 250m Poe Switch
No ratings yet
DES-F1018P-16 100Mbps 250m PoE + 1 Gigabit and 1 Combo Uplink 250m Poe Switch
3 pages
Em-Enw9503 9504
No ratings yet
Em-Enw9503 9504
7 pages
RCU510 177179a
No ratings yet
RCU510 177179a
2 pages
FES-STM User Manual
No ratings yet
FES-STM User Manual
29 pages
EN - 840D - Complete Service 05 2008 PL
100% (3)
EN - 840D - Complete Service 05 2008 PL
296 pages
Ruijie Reyee RG-EG105GW (T) Router Hardware Installation and Reference Guide (V1.0)
No ratings yet
Ruijie Reyee RG-EG105GW (T) Router Hardware Installation and Reference Guide (V1.0)
30 pages
CM5 Series Overview: C-More
No ratings yet
CM5 Series Overview: C-More
13 pages
25.06 Edge and ML
No ratings yet
25.06 Edge and ML
42 pages
Gigabit Crossover Cable
No ratings yet
Gigabit Crossover Cable
22 pages