Manuals | ZENIT-122:

NOTES / ПРИМЕЧАНИЕ:
This text is identical to the one in the Instruction
Manual, English version, 1992 year, and
converted to HTML in 2001.
Данный текст идентичен
оригинальному Руководству версии 1992
года, и специально подготовлен для формата
HTML в 2001 году.

ZENIT-122
PURPOSE AND ADVANTAGES
ZENIT-122 is a 35-mm single lens reflex camera intended for taking various amateur
pictures on black-and-white and color films. It can be used for special kinds of
photography as well, such as copying, taking close-up pictures of small-size objects at
short distances (ultra-close-up photography), taking pictures with the help of a
microscope (photomicrography), etc.
The camera accepts interchangeable lenses with M42x1 screw fittings and
mechanical back focal distance of 45.5 mm.
The following features are remarkable with the camera:

 semi-automatic exposure meter operating through the lens (TTL system)

provides for correct exposure setting when taking pictures with the standard
lens as well as with interchangeable lenses, light filters, supplementary lenses,
extension tubes;
 light-emitting diodes in the viewfinder, indicating correct exposure setting, can
be clearly seen both with the diaphragm fully open and stopped down;
 instant return mirror ensures continuous viewing of a subject before ;and after
exposure;
 high speed lens is provided with a pre-set diaphragm mechanism which
automatically closes the diaphragm down for the moment of shutter operation;
 fully open diaphragm ensures maximum brightness of the image in the view-
finder which is very important for viewing and focusing;
 composite focusing device provides excellent image sharpness in various
conditions of shooting;
 speedy exposure setting, simplified film loading procedure and frame counter
automatically re-setting to "0" upon pressing the film rewind button reduce the
time required for preparing the camera for picture taking;
 built-in self-timer enables you to take picture of yourselves among your friends
or to make a self-portrait;
 secret lock of the back door interlocked with the film rewind knob provides for
reliable locking of the back door and convenient unloading of the camera;
  flash unit connector socket and hot-shoe enable to use flash units both with
cable and cableless connection;
 shutter disengaging bush of stay-put type simplifies the film rewind procedure;
 film-checking pocket on the camera body contains characteristics information
of the film the camera is loaded with.

Before using the camera, make thorough study of the present Description. In so doing
bear in mind that the present Description can not be regarded as a handbook on
photography.
Due to ever-advancing development in camera construction, minor differences may
occur between the text and your camera.
HANDLING RULES
The camera is a precise optical-mechanical instrument. It should be handled carefully,
kept clean and protected from jolts, dust, moisture, and sharp temperature
fluctuations.
Do not remove the camera from its case the moment it is brought indoors from cold to
avoid sweating of its parts, especially the optical ones.
Do not touch the surfaces of the optical parts with fingers since it may damage their
coatings. Clean the optical coated lens surfaces with a clean soft cloth or cotton wool
wad slightly moistened with rectified alcohol or ether. The surfaces of the mirror and
the focusing device may be cleaned only if absolutely necessary with a dry soft brush
but in no case with humid cleaning agents.
Keep the camera closed in its case with the cap put on the lens.
Do not remove the lens from the camera without need to prevent dirt and dust from
getting both onto the surfaces of the lens optical parts and into the camera itself.
If you don't use your camera for some period of time (a month and more) remove the
batteries from the camera. Keep the batteries separately in places inaccessible for
children.
Load and unload your camera either indoors or in shade protecting it against direct
sun light and bright artificial light.
Always cock the shutter as far as it will go to avoid blank exposures.
Do not keep the camera with the shutter cocked for a long period of time since it is
likely to impair the shutter operation.
Do not try to rotate the shutter speed dial with the index moving along its short
section from "500" to "B". Do not rotate shutter speed dial when self-timer is
running and when setting the release button in "T" position. When taking
pictures in frosty weather, keep the camera under your street-clothes but not. in the
open air and take it out only for the moment of picture taking.
Since the camera is a complex instrument, its repair and adjustment should be
performed in repair shops only.
SPECIFICATIONS
Frame size, mm, -- 24x36
Film used -- 35 mm, perforated
Length of film in cassette, m -- 1.65
Number of frames -- 36 Shutter speeds, s -- from 1/30 to 1/500, "В" (by hand) and
long exposure
One of the lenses: HELIOS-44M-4MC HELIOS-77M-4
MC HELIOS-44M-4
HELIOS-44M-5
MC HELIOS-44M-5
HELIOS-44M-6
MC HELIOS-44M-7
Focal length, mm -- 58 52
Maximum relative aperture -- f/2 f/1.8
Aperture scale -- from 2 to 16 from 1.8 to 16
Distance scale, m -- from 0.5 to ∞ from 0.45 to ∞
Lens fitting -- M42x1
Light filter fitting -- M52x0.75
Sun shade fitting, mm -- Ø54
Viewfinder field of view, mm -- 20x28
Eyepiece magnification -- 4.3x
Flange/film distance, mm -- 45.5
Tripod bush thread -- 1/4"
Overall dimensions (without case), mm -- 142x97x99
Power supply voltage, V -- 3 (2x1.5)
Power supply -- from 2 batteries of Mallory D 386, Seiko SB-B8, СЦ-32, МЦ0.105
types.
Mass, kg -- 0.82

Certificates of Authorship
No 102683, No 150360; No 153652; No 178682; No 366447; No 476534; No
1015330; No 1247817
CAMERA DESIGN
 1 -- self-timer cocking handwheel
2 -- self-timer release button
3 -- self-timer window
4 -- flash unit connector socket
5 -- release button threaded for cable
release
6 -- shutter disengaging knob of
stay-put type
7 -- shoe for mounting flash units
and other accessories
8 -- eyelet of strap securing
9 -- film check pocket
10 -- lens

11 -- film rewind knob

12 -- film rewind crank
13 -- film speed dial
14 -- film speed scale
15 -- film speed index mark
16 -- protective strip
17 -- shutter speed dial
18 -- shutter speed index mark
19 -- shutter cocking and film advance lever
20 -- frame counter
21 -- cassette chamber
22 -- battery compartment end cap
23 -- viewfinder eyepiece
24 -- sprocket teeth
25 -- take-up spool
26 -- back door

27 -- distance scale
28 -- depth-of-field scale
29 -- aperture scale
30 -- lens mounting ring
31 -- control pin
32 -- aperture setting ring
33 -- focusing ring

CAMERA LOADING
Put the batteries into
the camera in the
following way: turn
cap 22counterclock
wise so that its slot
take the horizontal
position, remove the
cap and take out the exhausted batteries should there be any. Put new batteries into
the compartment with signs "+" outward (upwards).
Replace the cap with its slot in the horizontal position and turn it clockwise by 90° to
set the slot in the vertical position.
Check the indicating light for operation. To do this, looking through the viewfinder
eyepiece press the release button 5 till a definite stop is felt. If the light-emitting
diodes (one or both) light up it means that the power supply operates properly.

Load the camera with film in the following way:

- lift the film rewind crank 12, pull out the rewind knob 11 as far as it will go, and open
the camera back door;
- put a loaded cassette into the chamber 21;
- return the rewind knob 11 to a locked position slightly turning it, if required, to let the
spool guide enter the cassette;
- draw out a film leader as long as to reach the camera edge and insert it into the slot
of the take-up spool25; in so doing make sure that a sprocket 24 tooth engage a film
perforation hole;
- close the back door 26, tightly pressing it to make the lock latch;
- to transport a nonexposed portion of film to the film gate, cock and fire the shutter
twice. In so doing the frame counter should be set at "0".

Should the film be wound tightly in the cassette, the film rewind knob will rotate when
the shutter is being cocked. If the film is loose in the cassette, the rewind knob will fail
to rotate at the first frames;
- set the speed of the film loaded in the camera by turning dial 13 till a corresponding
film speed value is click-stopped against the index mark 15.
Bear in mind that wrong setting of the film speed with the dial 13 will result in wrong
exposure.
Reference Table of Film Speed Units

Designation on film speed scale

16 . 25 32 . 50 64 . 100 125 . 200 250 . 400 500 .
GOST-ISO 16 20 25 32 40 50 64 80 100 125 160 200 250 320 400 500 640
DIN 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29

SHUTTER SPEED SETTING

Turn the shutter speed dial 17 to bring a selected shutter speed opposite to the index
mark 18 on the camera top plate. In so doing the dial is click-stopped. Figures on the
shutter speed dial show shutter speeds in corresponding fractions of a second and
"B" indicates a hand-controlled shutter speed.
Shutter speeds can be set with the shutter both cocked and released. When taking
pictures at "B" the shutter remains open for as long as the release button 5 is pressed
down. To obtain a long exposure turn the depressed release button counter-clockwise
as far as it will go ("T" position). The exposure over, return the release button 5 to its
normal (middle) position and release it. This will result in closing the shutter.
To take a picture at "B" or long exposures one is recommended to use a cable
release which can be screwed into the release button thread. In so doing the camera
should be mounted on a tripod.
STOP SETTING
Set a selected aperture against the index mark by turning the aperture setting ring 32.
When taking pictures with a self-timer, the procedure of stop setting is somewhat
different as described in the section "Operating the Self-Timer".
FOCUSING
The camera viewfinder is provided with a composite focusing device consisting of
microprism collar and ground glass collar or focusing wedges, microprism collar and
ground glass collar. Before shooting remove the lens cap. Looking through the
viewfinder turn the lens focusing ring to obtain sharp image of the object within the
ground glass and microprism collars and for cameras with focusing wedges to match
the upper and lower parts of the split image. The best sharpness is obtained when
focusing is done at full aperture.

It should be noted that the focusing wedges and microprism collar, ensuring the best
possible focusing, are of no use when low speed interchangeable lenses are used
and focusing is done at apertures more than 4. In these cases as well as in
photomicrography and macrophotography focusing should be done on the ground
glass collar.
Focusing can be done as well without looking in the viewfinder. To do this turn the
focusing ring and, making use of distance scale 27, set the distance from the film
plane marked O on the camera top plate to the subject being shot against the larger
index mark.
The smaller index mark with letter "R" is used for shooting on infra-red films. In such a
case focus the image and introduce a correction by bringing the distance figure you
have obtained opposite to the index mark "R".
Focusing over, you can determine distances from the film plane to the near and far
limits of the depth of field making use of scales 27 and 28. On scale 27 against two
identical figures of scale 28 corresponding to the aperture with which you are going to
take pictures there will be set two figures, indicating the distance range within which
all the subjects will be sharp on film. For example, the lens is focused for 3 m and the
aperture to be used is that of 8. In such a case on scale 27 against two figures 8 of
scale 28 you can read that the image will be sharp within the distance range from 2.3
to 4.5 m.
Approximate depth-of-field limits can be determined visually as well by pressing the
release button till a definite stop is felt with the aperture value set beforehand. On the
ground glass collar of the viewfinder you will see what subjects will be sharp on film.
EXPOSUBE SETTING WITH THE HELP OF EXPOSURE METER
The camera semi-automatic exposure meter measures the light passing through the
lens (TTL system). As a result, making use of various combinations of aperture and
shutter speed values, you can set the exposure depending upon the brightness of can
object and the speed of film being used with a high degree of accuracy. It remains
true as well when interchangeable lenses, light filters, supplementary lenses and
extension tubes are used. For more accurate exposure determination in conditions of
poor brightness of the subject to be photographed the lens cap should be removed a
bit earlier, before shooting.
Looking through the viewfinder eyepiece in such a way that the whole its frame could
be clearly seen, press the release button 4 till a definite stop is felt but not till the
shutter "firing", should it be cocked, and hold the button in this position. On the right-
hand side of the viewfinder light-emitting diodes can be seen.
There are two modifications of cameras: one with two red and the other one green
and two red diodes.

1. Exposure setting in cameras with two-diode indication

Lighting of the upper diode indicates overexposure and of the lower one --
underexposure. Turn the aperture setting ring 32 and the shutter speed dial 17 till the
moment when both of the diodes are lighting. It indicates the best possible
combination of the shutter speed and aperture providing for correct exposure.
However, if you fail to obtain simultaneous blinking of both of the diodes, and
changing the shutter speed and aperture values over between the two neighbouring
ones results in switching the lighting from one diode to the other, you may select one
of these values. In such a case the exposure will be still acceptably correct.
2. Exposure setting in cameras with three-diode indication
Lighting of the upper (red) diode indicates over-exposure and of the lower (red) one --
under-exposure. Turn the aperture setting ring 32 and shutter speed dial 17 till the
moment when the middle (green) diode is lighting continuously. It indicates the best
possible combination of the shutter speed and aperture providing for correct
exposure. However, if you fail to obtain continuous blinking of the middle (green)
diode, and changing the shutter speed and aperture values over between the two
neighbouring ones results in switching the lighting from one red diode to the other red
one, you may select one of these values. In such a case the exposure will be still
acceptably correct.
PICTURE TAKING
Having prepared the camera for picture taking, cock the shutter, make sure of correct
focusing, framing and exposure setting and smoothly press the release button to take
a picture.

BEAR IN MIND that sharp pressure on the release button results in camera shaking
at the moment of exposure and thus in blurring of the picture.
When taking pictures see to it that index marks on the release button and the camera
top plate (between "T" and "V") should be lined up.
To take a picture with long exposure mount the camera on a tripod, set the shutter
speed dial 17 at "B", slightly press release button 5 (the shutter should be set
beforehand in the "ready to fire" position) and turn it counter-clockwise as far as it will
go ("T" position).
The exposure over, return the button to its normal (middle) position and release it. As
a result the shutter will close.
CAMERA UNLOADING
When the exposure counter shows figure 36, rewind the film into the cassette. To do
this:
- release the shutter, pressing release button 5;
- press bush 6 downwards as far as it will go;
- flip open crank 12 and rotate it in the arrow direction until the film leaves the take-up
spool. Try and rotate the crank smoothly, without jerks, and not too fast to avoid
traces of static electricity on film;
- pull film rewind knob 11 all the way out, open the back door and remove the
cassette;
- turn the cocking lever 19 and, holding the sprocket teeth 24 with your finger, make
sure that it is engaged.
Do not try to take more than 36 shots. However if it has happened and the film, fixed
in the cassette, prevents full shutter cocking, unload the camera in the following way:
- press button 6 and hold it down rewinding the film into the cassette;
- remove the cassette;
- cock and fire the shutter;
- press button 6 to reset the frame counter to "0".
OPERATING THE SELF-TIMER
To use self-timer mount the camera on a tripod, then do the following:
- focus the image;
- press the release button 5 till a definite stop is felt and turn it clockwise ("V"
position). This will enable you to set the aperture manually since the diaphragm does
not operate automatically when the self-timer is used;
- set the aperture and the shutter speed;
- cock the shutter;
- wind the self-timer by turning lever 1 downwards as far as it will go in the direction of
the camera top plate. Red light in the self-timer window indicates that the self-timer
mechanism is not cocked, green light indicates that it is cocked;
- press the self-timer release button 2 and take your place in front of the lens.
The shutter will operate no sooner than in 7 seconds after pressing the button -- self-
timer operation over, return button 5 to its home position.
TAKING FLASH PICTURES
The camera shutter is synchronized for use with electronic
flashes. To connect a flash unit with the camera, the latter is
fitted with socket 4 on the front wall of the camera.
The camera design provides a well for cableless connection of
flash units. For this aim it is fitted with hot-shoe 7.
Before mounting a flash unit on the camera remove protective
strip 16 from shoe 7.
The shutter speed of 1/30 s only can be used for flash
photography.
The aperture is selected in accordance with the instructions
given in the Instruction Manual on a flash unit being used.

INTERCHANGEABLE LENSES AND CLOSE-UP SHOOTING

The camera accepts interchangeable lenses provided with M42x1 mounting thread,
and mechanical back focal distance of 45.5 mm.
The lenses with index mark "MC" are provided with multicoating of optical surfaces
that ensures better protection against reflexes -- (halos, glares, and light spots) when
taking pictures of objects with sharply heterogeneous illumination against light as well
as improves color rendition.
If an interchangeable lens has no automatic diaphragm, the diaphragm can be
handled manually. If a picture is taken with a long-focus lens, the left-hand and right-
hand edges of the frame will be slightly cut off.
With the help of a special stand the camera can be
used for making copies of drawings, manuscripts,
photographs. To do this use should be made of
extension tubes by setting them between the camera
body and the lens. To obtain the magnification you want
either one tube or a combination of some tubes can be
used.
Extension tubes provided with a control pin should be
used with lenses where no diaphragm manual mode
switch is provided ("HELIOS-44M-4" for example).
Extension tubes without control pins should be used
with the lenses in which the aperture is set manually
(the diaphragm mode selector switch should be set to
"M".
Interchangeable Lenses
Lens name focal length in mm relative aperture angle of field of view minimum focusing distance in m
Mir-20M
20 f/3.5 96° 0.18
MC Mir-20M
Mir-10A 28 f/3 75° 0.20
MC Mir-24M 35 f/2 66° 0.30
MC Industar-61 50 f/2.8 45° 0.30
Helios-40-2 85 f/1.5 28° 0.80
Jupiter-9
85 f/2 28° 0.80
MC Jupiter-9
Tair-11A 135 f/2.8 18° 1.20
Jupiter-37A
135 1/3.5 18° 1.20
MC Jupiter-37A
MC Granit-11M 80--200 f/4.5 30°--12° 1.50
Jupiter-21M 200 f/4 12° 1.80
ZM-6A 500 f/6.3 5° 6.0
MC MTO-11 CA 1000 f/10 2°30' 8.0

References:
ZENIT-122 Russian User manual
Archives: ZENITs-12 line

Manuals