Wave Forms Types

Type Name: Waveform: Technical Characteristic:

High frequency current, amplitude modulated with low
Description
frequency sine
Carrier Frequency 2kHz (*) / 5kHz/10kHz(*)
Beat Frequency 1-200 Hz
Current, Amplitude 0-50 mA into 500 ohm
Voltage (max) ±60V Peak
IFC
(Premodulated Waveform Duty
33% max
Interferential) Cycle
Sweep Time 15 sec
Sweep Frequency 1-200 Hz

Cycle Time User defined or continuous

Ramp Up/Down 0-10 sec

Description Sine wave current

Carrier Frequency 2500 Hz

Burst Frequency 20-100 Hz
Current, Amplitude 0-50 mA into 500 ohm
Russian Current
Voltage (max); ±60V Peak
Duty Cycle 10-33%
Cycle Time User defined or continuous

Ramp Up/Down 0-10 sec

Alternate current with positive and negative rectangular
Description
pulses and interphase intervals
Burst Frequency: 1-200 bps
Phase duration: 20-300 µsec
Interphase
100 µsec
Interval:
VMS Burst Current, Amplitude 0-50 mA into 500 ohm
Voltage (max) ±60V Peak
Waveform Duty
20% max
Cycle
Cycle Time User defined or continuous

Ramp Up/Down 0-10 sec

Alternate current with positive and negative rectangular
Description
pulses
Pulse Frequency 1-200 Hz

Phase duration 50-300 µsec

Symmetric Biphasic Current, Amplitude 0-50 mA into 500 ohm

Rectangular pulse Voltage, max ±60V Peak
Waveform Duty
20% max
Cycle
Output Mode Normal, Modulation, Burst
Frequency
1.25-10KHz
Modulation

-1-
 Wave Forms Types

Type Name: Waveform: Technical Characteristic:

Alternate current with positive rectangular and negative
Description
triangular pulses
Pulse Frequency 1-300 Hz
Positive:(0.2-100)msec; Negative: (0.4-200)msec;
Phase duration
(*) negative duration/positive duration = 2
Asymmetric Biphasic Current, Amplitude 0-50 mA into 500 ohm
Pulse Voltage, max ±60V Peak
Waveform Duty
20% max
Cycle
Ramp Up/Down 0-10 sec
Output Mode Normal, Modulation, Burst
Description 5-100 Hz Half-wave rectified current

Current, Amplitude 0-50 mA into 500 ohm

MF
Current Voltage, max 60 V
Waveform Duty
33% max
Cycle
Description 10-200 Hz full-wave rectified current

Current, Amplitude 0-50 mA into 500 ohm

DF Current
Voltage, max 60 V
(*) Diadynamic

Waveform Duty
33%
Cycle, max
Description MF and DF current. Alternates the MF and DF every few seconds

Current, Amplitude 0-50 mA into 500 ohm

CP Current Voltage, max 60 V
Waveform Duty
33% max
Cycle
Description: LP alters the amplitude of every other DF pulse

Current, Amplitude 0-50 mA into 500 ohm

LP Current Voltage, max 60 V
Duty Cycle 33% max
Ramp Up/Down 0-10sec

-2-
 Wave Forms Types

Description A direct current with a rectangular pulse

Pulse Duration Pulse: 0.02-250msec

Pulse Frequency 1-10,000 Hz

Monophasi Current, Amplitude 0-50 mA into 500 ohm
(*) Monophasic Rectangular Pulsed

c
Rectangul Voltage, max 60 V
ar Pulsed
Duty Cycle 20% max

Cycle Time User defined or continuous

Ramp Up/Down 0-10 sec

A direct current with a rectangular pulse having a phase
Description
duration of 2 ms and a phase interval of 5 ms
Phase duration 2 msec
Trabert 2- Phase interval 5 msec
5 Duty Cycle 20% max
(Ultra-
Reiz) Current, Amplitude 0-50 mA into 500 ohm

Voltage, max 60 V

Ramp Up/Down 0-10 sec

Description A direct current with a triangular pulse

Pulse Duration 1-250msec

Pulse Frequency 1-300 Hz

(*)
Monophasic Duty Cycle 30% max
Triangular Pulsed
Current, Amplitude 0-50 mA into 500 ohm
Voltage, max 60 V

Ramp Up/Down 0-10 sec

Description A direct current with a short-time interrupts

Pulse Frequency 8000 Hz

(*) Duty Cycle in Pulse 95%
Interrupted direct Current, Amplitude 0-50 mA into 500 ohm
current
Voltage, max 60 V
Waveform Duty
20% max
Cycle
A direct or alternate current with a rectangular pulse and
Description
low amplitude
Beat Frequency 0.1-1000 Hz

Current, Amplitude 10-1000 µA into 500 ohm

Microcurrent
Ramp Up/Down 1 sec (+/- only)

Alternating Time 2.5 sec

Polarity (+), (-), (+/-)

-3-