301T Trailer Mounted Drill Rig

The PAT 301T is a fully featured top drive rotary rig able to
complete holes in hard or sedimentary rock.

It is one of the lightest rigs in its class and able to be towed

behind most common pick - up trucks.

This is the PAT ‘best seller’ for rural water supply holes in
hard rock areas.

Product Description :

PAT-Drill 301T is a highly compact, mounted on trailer hydraulic drilling rig, available with all drilling
accessories, easy to set-up and move.

This is an ideal multipurpose rig, powerful, versatile and easy to transport across a variety of terrains.
 TECHNICAL DATA & SPECIFICATION

MECHANICAL BREAK

ROTATION HEAD
POWER PACK

HYDRAULIC STABILISING JACK

SPARE TYRE

H
FOAM PUMP
DRILL PIPE RACK

TRAIL LIGHT

CONTROL PANEL
L OIL LUBRICATOR

RECOMMENDED HOLE RANGE (Depths to 150 m) WATER/FOAM INJECTION PUMP

Medium & Hard rock, DTH-Hammer drilling operation: Triple piston pump driven by a hydraulic motor.
(Needs a seperated air compressor) Motor speed: 450 rpm
3” - 5” model DTH-Hammer with capacity to drill Max. displacement: 10 litres/min
4” - 6” (100-152 mm) diameter Max. working pressure: 30 bar
Soft formations, rotary mud drilling operation:
(Needs a seperated mud pump) STABILISING JACK
Drag bit 4” - 10” (100-254 mm) diameter 2 Rear jacks Hydraulic driven
2 Front jacks Manually operated jack
TOP ROTATION HEAD
Single reduction gearbox, hydraulic motor driven, and  variable AIR LUBRICATION SYSTEM
rotation speed. Enable to swing-a-side for easily casing installation. Fitted lubricator of Venturi-type for drip lubrication-fully adjustable
Swivel spindle 40 mm inside diameter, sub joint 2 3/8 API Reg Mod flow control-for DTH-Hammer
Gear box ratio: 3.875 : 1 Max pressure: 40 bar
Speed: @2000 rpm 0 – 40 rpm Oil tank capacity: 7 litres
Max. torque: 1980 Nm
PIPE RACK
MAST Each side containing: (for 2 metre) 12 pcs. 76mm pipe
All steel work, 3.15 metres high, break-out table to open  200 15 pcs. 60mm pipe
mm. diameter. Mast raised to vertical from storage position by a
hydraulic cylinder. The mast is also  equipped with 2 LED flood DRILL PIPE
lights for night time operation. Drill pipe length: 2 metres
Drill pipe diameter: 60/76 mm.
FEED SYSTEM
Rotation head is raised and lowered by a hydraulic cylinder and TRAILER
heavy- duty transmission chain. Head travelling stroke: 2.25 metres. Towing: Ring OD = 120 mm, ID = 70 mm
Pull up - Capacity: 2900 kg Thickness = 25 mm
Max. speed: 12 metres/min Brake system:
mechanical brake for overrun parking auto reverse.
OPERATION CONTROL PANEL Suspension:
4 levers controlling rotation head, pull and feed Single axle, torsion sprung with overrun brake system.
2 regulators for rotation speed and pull/feed weight 2000 kg capacity.
4 system pressure gauges Trailer light:
Fitted trailer lights with 7 pin plug connection to
HYDRAULIC POWER PACK vehicle system.
Engine: 35 hp (26.8 kW) at 3000 rpm, 3 cylinders, YANMAR 3TNV88 Wheels & Tyres:
diesel engine, water-cooled, electric start. 2+1 spare 5 x 1/2” stud 140 mm PCD 7.00-R15, 8 PLY
Hydraulic system: double gear pump type, system pressure 250
bar max, 100 litres tank capacity. DIMENSIONS
Fuel tank: 35 litres Overall length : (L) 4.05 m
Overall width : 1.69 m
Overall height : (H) 1.75 m
Weight (without drill pipes) 1 ,450 kg
Promotion of Appropriate Technology Co.,Ltd. reserves the right to change these specifications without notice

PROMOTION OF APPROPRIATE TECHNOLOGY CO.,LTD

44 Moo 4 CHIANGRAK NOI, SAMKOK PATHUMTHANI 12160 THAILAND
Phone +66(0)2199 3785-6 Fax+66(0)2199 3787 www.pat-drill.com Email: [email protected]