HD Vehicle Traveling Data Recorder Instruction Manual: Product Structure

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 4

HD vehicle traveling data recorder instruction manual

(1) High quality HD night vision / HDMI HD output


(2) Quick lock video files or unlock function
(3) Parking monitoring functions open parking mode, automatically switch on video and save protected
files automatically.
(4) Built-in G-sensor, can record information based on abnormal movement and automatic lock on the
current video protection.

Product structure
1. Power button
2. OK button
3. Menu
4. Down button
5. Up button
6. Parking monitoring button
7. Mode/Lock
8. Lens
9. Night lights
10. USB
11. AV-OUT
12. HDMI-OUT
13. Mic
10. USB
14. TF Slot
15. LCD screen

1. Power button
Switch machine function
Short press to boot into the standby state.
Long press to save files
Open/close function

2. OK button
Open/close video recording
In standby mode, short press OK open video, video is short press OK stop video.
Camera In photo mode - short press OK to perform taking pictures.
File playback function - In playback mode short press OK can perform the play/pause video files.
Confirm the function

3. Menu button
Setting menu - In playback mode, select protect or delete the file.

4. Up button
Choosing function upwards.
In video mode, volume down, fast rewind (long press)
In video mode, open / close the microphone (short press)

5. Down button
Choosing function downwards
In video mode, volume down, fast rewind (long press)
In video mode, open / close the microphone (short press)

6. Parking monitoring button


Press the parking monitoring before the shutdown, then the machine “P” along the right of the screen will
be displayed, the machine will enter the parking mode. After parking mode to turn it off, if there is a foreign
substance to the machine or the car, then the machine will automatically boot for video about 20 seconds to
turn it off again. If you want to cancel the function in the press stop monitoring after open parking mode,
then “P” in the upper left corner disappears, this represents the machine will not parking in execution mode
function.

7. Mode/lock button
Lock key Short press lock key on current are video file fragments can lock or unlock the protection
Mode switch
8. Motion detection
Open motion detection function, the camera will be recording 10 seconds when it detect any change in the
video image it is receiving and its will be stop recording when there is no any change in the video image.

Adjust the position of the lens


The machine before the lens by bracket can rotate 360 degrees before and after, in order to better
cooperate with the vehicle traveling data recorder fixed position, and achieve good effect.

Open and close the unit


1. The manual switch machine - short press the power key button once, the screen lights up, then long
press power button can be realized to turn it off.
2. Driving automatic switch machine - access to the car first 5v power supply, the car starts machine will
start automatically after a delay and video.

Operations
Switch work mode - This machine has three work modes camera, taking pictures and playback mode.
Press “Lock Key” (button 7) to switch.

The settings menu and system setting


In video or photographic mode, short press (menu), the “set menu” column is a blue background. Use
“up/down” button to choose the required set projects. Press OK to confirm settings, press “lock key” to exit
the menu again.

System Settings
G-sensor Off/1g/2g/3g/4g
Time/date Automatic shutdown Off/3mins/5mins/10mins
Screen saver off/1min/3mins/5mins
Keys on/off
Language English
TV modes NTSC/PAL
Light source frequency 50/60
Fill light on/off
Image rotation on/off
Formatting OK / cancel
Default setting OK / cancel

Photography
Top left corner of the screen has video signal, according to the confirm button start video, video screen
when the top left corner of the symbol flashing, press OK key again to stop video, disappear in the upper
left corner.

Video mode option


Resolution FHD 1080, 1080p, 720p, QVGA, VGA;
Loop video close, 3 minutes, 5 minutes, 10 minutes;
Mobile detection on/off
Video and audio on/off
Date on/off
G-Sensor off/1g/2g/3g/4g

Photo models and photo set


1. Press the power, the camera into the camera mode, press the lock key into photo mode, have a photo
symbol at the upper left of the screen, at this time into the photo mode.
2. When the press OK key, click a sound, a preview picture waiting, about 1 second later, take pictures,
photos, caught the camera don’t shake, as far as possible so as not to affect the image quality.
Shooting methods single shot.
Resolution 12M, 10M, 8M, 7M, 5M, 3M, 2M, VGA
Shoot on/off
Image quality super fine/fine/normal
Sharpness sharp/normal/soft
White balance automatic, daylight, cloudy, incandescent.
ISO automatic
Hand shake on/off
Quick preview close, 2 seconds, 5 seconds
Date label pass, date, date/time

Playback modes
1, browse the file
Enter the camera mode, press “lock key” twice, at this time into the playback mode, press the button OK
can to browse pictures audio data.
Playback is browsed by document type, respectively, when the file type is video, simply look at the video
file, for the image, can only view picture.
2. Remove and Protection
In playback mode, press menu to delete and protection lock option, press key OK to enter delete current
delete all option, press key OK to enter, press key OK to determine again.
Before you can enter the lock to a file, unlock cannot delete, protect some important information.

Shortcut keys in the process of video application


Press the lock key and unlock the current video file

Charging while video mode


Use the USB car charger is connected to the machine, boot that can enter the charge/video mode.

Video is read and USB function


Native support USB directly read, read the unit recorded video files can also directly connect the machine
with computer with USB cable, or remove the TF card directly, using the card reader reads the TF card file.

PC CAM computer camera This machine can be used as a computer camera, video camera connected to
the computer with USB cable, the pop-up storage/camera option, press up/down keys to move the
selection to the cameras after press confirm key confirmed, open my computer, there will be, double-click
the icon can be used when the computer camera. When OK select memory, using a computer can check
the card information.
Connect the TV
1. HDMI cable can connect the high-quality television replay.

Trouble shooting
For problems in normal operating situation, please try these methods below
Can’t take photo and recording
Check the if the TF card has enough space or locked

Automatically stop when recording


Use the compatible high-speed TF card Class 10 only

Appear files error when replay photo or video


TF card storage error, please use formatting function to format your TF card

Black image when recording sky or water scene


Scenes with big contrast will influence the automatic exposure function of camera; you can adjust EV in
setting mode to correct.

Colour is not perfect in cloudy day and outdoor light


Set the white balance function to automatic
Cross stripe interference in image
Because of wrong light frequency, please set it to 50 Hz or 60 Hz according to the local power supply
frequency

Crash
Restart - quick press on RESET button after crash

You might also like