0% found this document useful (0 votes)
17 views5 pages

USB Driver Installation Instructions

Download as pdf or txt
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 5

YASKAWA 1000 Series USB Driver Installation

Follow these steps to install YASKAWA 1000 Series 32 / 64 Bit USB drivers under
Windows 7.

Note: These steps can also be used to install drivers for the 1000 series copy unit
(JVOP-181).

Step 1: Start your computer.

Step 2: Connect the drive or Copy Unit to the one USB port of your computer.

Step 3: Power-up drive.

Step 4: Wait until Windows reports that it is not able to find the driver.

Step 5: Click Windows Start button and right mouse click on "Computer", select
properties.

Step 6: Click on Device Manager and the device manager window opens.
Next select “COSMOS Series Inverter”, right mouse click and select Update
Driver Software.

YASKAWA Europe GmbH – USB Driver Installation Page 1/5


Step 7: Click on Browse my Computer for Driver Software.

Step 8: Select location of the driver files and click next.

YASKAWA Europe GmbH – USB Driver Installation Page 2/5


Step 9: Click Install button to install the driver.

Step 10: Driver is now installed.

YASKAWA Europe GmbH – USB Driver Installation Page 3/5


YASKAWA Europe GmbH – USB Driver Installation Page 4/5
Important Note: Follow the steps A through D in case the driver did not install properly or
Windows automatically selected another driver.

Step A: Right mouse click on the COSMOS Series Inverter or AC Drive USB Device
and select “Uninstall”.

Step B: Next click “Ok” in the dialog box.

Step C: Unplug the USB cable from your computer and wait 10 sec then plug the USB
cable back in.

Step D: Repeat steps 1 though 9 above to install the driver.

YASKAWA Europe GmbH – USB Driver Installation Page 5/5

You might also like