Scribd
Upload
46 views5 pages

Dynamic HR Allocation & Dynamic HR/FR Adaptation: Slide

The document discusses dynamic half rate allocation in cellular networks. It describes techniques for dynamically allocating full rate or half rate channels based on traffic load and quality thresholds. Thresholds can be configured separately for AMR and non-AMR capable devices. Existing calls may also be reallocated between full rate and half rate depending on traffic and quality levels.

Uploaded by

beni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
46 views5 pages

Dynamic HR Allocation & Dynamic HR/FR Adaptation: Slide

The document discusses dynamic half rate allocation in cellular networks. It describes techniques for dynamically allocating full rate or half rate channels based on traffic load and quality thresholds. Thresholds can be configured separately for AMR and non-AMR capable devices. Existing calls may also be reallocated between full rate and half rate depending on traffic and quality levels.

Uploaded by

beni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Slide

Dynamic HR Allocation &


Dynamic HR/FR Adaptation

03813-LZU 108 3704 Uae Rev E Slide 1

Dynamic HR Allocation
Enhancement Threshold defined by operator
EFR EFR

AMR
AMR EFR
Traffic threshold:
New calls allocated EFR AMR
HR
AMR

• Use HR only when and where it is needed


• Better utilization of AMR HR

03813-LZU 108 3704 Uae Rev E Slide 2

03813-LZU 108 3704 Uae Rev E 1


Slide

Dynamic HR Allocation

• Allocate FR or HR TCH:s
for new connections in
accordance with the
traffic load in the cell

03813-LZU 108 3704 Uae Rev E Slide 3

Dynamic FR/HR Adaptation


Thresholds defined by operator

Congestion threshold: EFR EFR


Existing calls
reallocated HR
AMR EFR
AMR
EFR AMR

AMR

• Capacity boost from HR only when needed to avoid congestion

03813-LZU 108 3704 Uae Rev E Slide 4

03813-LZU 108 3704 Uae Rev E 2


Slide

Dynamic FR/HR
adaptation
• HR Packing process &
FR/HR Mode Adaptation
• Thresholds Traffic Level:
– DMTHAMR, DMTHNAMR
• Thresholds Quality:
– DMQGAMR, DMQGNAMR

03813-LZU 108 3704 Uae Rev E Slide 5

Quality based HR to FR mode change

• If the quality of an existing


connection falls below the defined
thresholds DMQBAMR,
DMQBAMR, the MS change to
FR.

03813-LZU 108 3704 Uae Rev E Slide 6

03813-LZU 108 3704 Uae Rev E 3


Slide

Command Description

• RLDHC:CELL=3300A,DHA=ON,DTHAMR=35,DTHNAMR=20;
This example enables the function Dynamic HR Allocation and
changes threshold parameters in the cell 3300A.
• RLDMC:CELL=3300A,DMQG=ON,DMTHAMR=30,DMTHNAMR=20,
DMQGAMR=50,DMQGNAMR=40;
This example enables quality estimates, changes traffic level threshold
and quality threshold for FR to HR mode adaptation in the cell 3300A
• RLDMC:CELL=3300A,DMQB=ON,DMQBAMR=60,DMQBNAMR=50;
This example enables HR to FR mode adaptation and changes quality
thresholds in the cell 3300A

03813-LZU 108 3704 Uae Rev E Slide 7

Parameter Summary (I)


• DHA is used to turn the feature Dynamic Half Rate Allocation ON or OFF per
cell
• DMQB is used to switch ON or OFF the quality based channel rate switching
from HR to FR per cell
• DMQG is used to switch ON or OFF the quality based channel rate switching
from FR to HR per cell.
• DMQBAMR is the threshold triggering a switch from a HR channel to a FR if
the filtered value of rxqual_dl or rxqual_ul for an AMR MS is exceeding this
threshold. The parameter is set per cell.
• DMQBNAMR is the threshold triggering a switch from a HR channel to a FR if
the filtered value of rxqual_dl or rxqual_ul for a non AMR DR capable MS is
exceeding this threshold. The parameter is set per cell
• DMSUPP is the parameter controlling the activation of DYMA
(Dynamic FR/HR Mode Adaptation). It is set per cell.

03813-LZU 108 3704 Uae Rev E Slide 8

03813-LZU 108 3704 Uae Rev E 4


Slide

Parameter Summary (II)


• DMQGAMR is the threshold triggering a switch from a FR channel to a HR
channel if the filtered value of rxqual_dl or rxqual_ul for an AMR MS is less
than this threshold.
• DMQGNAMR is the threshold triggering a switch from a FR channel to a HR if
the filtered value of rxqual_dl or rxqual_ul for a non AMR DR capable MS is
less than this threshold.
• DMTHAMR is the HR packing threshold parameter for AMR HR capable
MS:s. The parameter is set per cell.
• DMTHNAMR is the HR packing threshold parameter for non AMR but DR
capable MS:s. The parameter is set per cell.
• DTHAMR is the threshold parameter for AMR HR capable MS:s at channel
allocation above which an AMR MS will be allocated on a HR channel. The
parameter is set per cell and is a percentage value.
• DTHNAMR is the threshold parameter for non AMR HR but DR capable MS:s
at channel allocation above which a DR capable MS will be allocated on a HR
channel. The parameter is set per cell and it is a percentage value.
03813-LZU 108 3704 Uae Rev E Slide 9

Parameter values

Parameter Default Rec. Value Unit


name value value range
DHA OFF ON ON/OFF -
DMQB OFF ON ON/OFF -
DMQBAMR 50 50 0 to 100 dtqu
DMQBNAMR 45 45 0 to 100 dtqu
DMQG OFF ON ON/OFF -
DMQGAMR 35 35 0 to 100 dtqu
DMQGNAMR 30 30 0 to 100 dtqu
DMSUPP OFF ON ON/OFF -
DMTHAMR 20 20 0 to 100 %
DMTHNAMR 10 10 0 to 100 %
DTHAMR 30 30 0 to 100 %
DTHNAMR 15 15 0 to 100 %

03813-LZU 108 3704 Uae Rev E Slide 10

03813-LZU 108 3704 Uae Rev E 5

You might also like