Doc. Title Rev.

page of pages
SyncTrak_v5 User Guide 1.02 1 of 16

SyncTrak_v5
User Guide

User Guide

Suntech International Ltd.

 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 2 of 16

Table of Contents
1. Introduction ......................................................................................................................................... 3
2. Install SyncTrak_V5 ............................................................................................................................ 3
3. Configuration tool ................................................................................................................................ 6
3-1. Connect to Device .................................................................................................................... 6
3-2. Change parameters .................................................................................................................. 7
3-3. Circular Geo-fence Setting ....................................................................................................... 8
3-3-1. Add Circular Geo-fence .................................................................................................. 8
3-3-2. Edit Circular Geo-fence ................................................................................................ 10
3-4. Polygon Geo-fence Setting ..................................................................................................... 11
3-4-1. Add Polygon Geo-fence ............................................................................................... 11
3-4-2. Edit Polygon Geo-fence ............................................................................................... 13
3-5. Profile ...................................................................................................................................... 14
REVISIONS ........................................................................................................................................... 16
 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 3 of 16

1. INTRODUCTION

Using SyncTrak_V5 you can change parameters and download firmware of ST devices easily.
It can be connected to all of Suntech Products, ST300 and ST940 series.

2. INSTALL SYNCTRAK_V5

Execute SyncTrak_v5.exe
If you are using Windows Vista or 7 or 10, you have to execute it in Administrator mode.

Select a language. We supported English and Portuguese (Brazilian).

 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 4 of 16

Select folder where SyncTrak will installed.

Click Install
Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 5 of 16
 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 6 of 16

3. CONFIGURATION TOOL

3-1. Connect to Device

Shortcut of SyncTrak_V5 is installed in the desktop.

You can execute it in Start Menu. Start  Programs  Suntech  SyncTrak_V5

Turn on the device and select COM port that is connected to the device and click button.
When device is connected to SyncTrak_V5, version of device is displayed.
 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 7 of 16

3-2. Change parameters

If you have to change some parameters, change parameters as you want and click
button.
Setting command and result are displayed in the box at the bottom of menu.
 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 8 of 16

3-3. Circular Geo-fence Setting

3-3-1. Add Circular Geo-fence

If you would like to add new circular geo-fence, you should use Add Circular Geo-Fence
function.(Click ADD button)

This function has two steps. First step is set geofence ID and IN, OUT options. After set
parameters and clicked NEXT button, you can see the second step, set coordinate and radius
dialog. If you set all of parameters and click SEND button, you can set to complete to add new
circular geo-fence.
 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 9 of 16

Fig> First Step

Fig> Second Step

 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 10 of 16

3-3-2. Edit Circular Geo-fence

Edit Circular Geo-fence is similar to ADD Circular Geo-fence function. Select item in list, click
EDIT button and edit saved circular geo-fence.
 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 11 of 16

3-4. Polygon Geo-fence Setting

3-4-1. Add Polygon Geo-fence

If you would like to add new polygon geo-fence, you should use Add Polygon Geo-Fence
function.(Click ADD button)

This function has two steps. First step is set geofence ID and IN, OUT options. After set
parameters and clicked NEXT button, you can see the second step, set coordinate dialog. If
you set all of parameters and click SEND button, you can set to complete to add new polygon
geo-fence.
 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 12 of 16

Fig> First Step

Fig> Second Step

 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 13 of 16

3-4-2. Edit Polygon Geo-fence

Edit Polygon Geo-fence is similar to ADD Polygon Geo-fence function. Select item in list,
click EDIT button and edit saved polygon geo-fence.
 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 14 of 16

3-5. Profile

Click Load Profile button ( ).

If you do not have profile, button.

It saves current settings as profile and load automatically.

 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 15 of 16

Now click button, then all the parameters will change all at once.
 Doc. Title Rev. page of pages
SyncTrak_v5 User Guide 1.02 16 of 16

REVISIONS

Rev. Date Change Author

1.00 2014-02-04 Created DY Jeong
1.01 2014-03-02 Revised index. DY Jeong
1.02 2018-10-23 Modified the overall contents due to synctrak version update. JH SIM