Factory Address: Luohuang Industrial Park, Jiangjin Dist., Chongqing, China E-Mail: Tel

CHONGQING PUREPATH GREEN TECHNOLOGY CO., LTD.
Factory Address: Luohuang Industrial Park, Jiangjin Dist., Chongqing, China

Http://www.purepathtech.com E-mail: [email protected] Tel: +86-18502307473
_ ________________________________________________________________________________________________
PPGT-LP Waste Oil Distillation Plant (for Diesel Production)
Who We are?
PurePath Green Technology designs and manufactures complete, turnkey, skid mounted systems which recover near virgin grade base oil and diesel
from waste lubricants. PurePath was founded in 2007 and has been testing, engineering, designing, fabricating, installing and operating waste oil
re-refining and distillation systems since its inception.
Copyrights © 2018-2028 Chongqing PurePath Green Technology Co., LTD. All rights reserved.
_ ________________________________________________________________________________________________
PurePath is a synergy of cutting edge design, in-the-trenches experience, top engineering ability and global standard manufacturing.
With over 13 years of environmental engineering experience in building affordable, turn-key, reliable, skid mounted, state-of-the-art plants. Our mission
is to facilitate environmental restoration, resource recovery and pollution reduction through innovative technologies and design, construction, and
operation of affordable state-of-the-art waste recovery systems.
_ ________________________________________________________________________________________________
PROCESS FLOW DIAGRAM OF PPGT-LP WASTE OIL DISTILLATION PLANT
_ ________________________________________________________________________________________________
PARAMETERS
Model No.
PPGT-LP-1 PPGT-LP-2 PPGT-LP-3 PPGT-LP-4 PPGT-LP-5 PPGT-LP-6 PPGT-LP-7
Items.
Daily Production Capacity
2 TPD 5 TPD 10 TPD 15 TPD 20 TPD 30 TPD 50 TPD
(Max.)
Heating Power 21KGS LPG/24KGS FUEL OIL/280KWH/PER TON OF WASTE OIL
Power Consumption 15KWH PER TONS OF WASTE OIL
Vacuum Degree ≦-0.05KPa
Heating Method Fuel Oil/Natural Gas/LPG/Electricity
Heating Temp. 160-450℃
Voltage 220/380/415V 50/60HZ
Noise ≤60dB
Dimensions(L*W*H) 10*4.2*5.8 M 11.5*4.5*6.0 M 13*5.0*7.0 M 15*5.5*7.5 M 18*6.0*8.0 M 25*7.0*10 M 35*10*12 M
Approx. Weight 10T 12T 15T 18T 22T 26T 35T
*TPD=Tons Per Day

*All parameters are subject to variations, please consult our sales representative for accurate parameters before placing an order.
_ ________________________________________________________________________________________________
FEATURES & ADVANTAGES
1. Designed by PurePath engineers team
Pure Path is proud to have the most professional and creative technical team, we have chief chemical engineer who
had worked for Sinopec for more than a decade, we have CTO who used to operating serval waste oil refining
project in last 16 years, we have factory director who had worked in petroleum refineries overseas... Our technical
team is the most valuable asset of our whole company. We believe that technology is the king to win the market.
Professional makes Perfect
All the parameters and dimensions for the parts and components of this re-refining plant have been precisely &
carefully calculated and simulated by our professional technical team to make sure every single drop of the oil out of
this plant is pure and clean and every single of your penny will be worth it.
2. API Standards of Diesel Fuel
The final product diesel fuel that you will get from PPG-LP waste oil
pyrolysis plant will be API standard commercial diesel fuel which can be
used for high speed diesel engines/vehicles with Low Sulfur, Low Acidity,
High flash point and cetane number)
Refer the test report for more information.
_ ________________________________________________________________________________________________
3. Exclusive Sulfur Removal Unit
PPGT Sulfur Removal Unit was developed by our

chemical engineers with PPGT formulated & customized
sulfur removal catalysts and adsorbents which are able to
bring the sulfur down to 50ppm(Min.) w/o getting
hydrogen involved.
* If you are looking for a result of Sulphur content to be

less than 10ppm, currently the only proven technology is
Hydrodesulphurization process which is going to be a
tremendous investment. You should be really cautious if
anyone tells you that they have the technology to bring
the sulfur down to 10ppm W/O getting hydrogen involved.
4. Formulated additives
To remove the Heavy Metals, Colloids, Asphaltenes, Aromatic Hydrocarbons and damaged additives from waste oil, improving the coking issues of the distillation
column. Most of all, it is able to increase the purity, cetane number and flash point of the produced diesel fuel to meet the API
standards.
_ ________________________________________________________________________________________________
5. Thin Film Evaporator
To remove the moisture and light hydrocarbons out of waste oil in relative lower temperature without damaging the oil
substances, avoiding the water & light HC to be mixed in the final product oil and increasing the flash point
6. Real Fractionating with exclusive customized plate column
Precisely calculated numbers, distances & fractional hole areas of

column plates which was fully simulated by Aspen/ProII, plus the PPGT
patented trays to ensuring the optimal effect of gas-liquid mass transfer
process (the multiple contacts between gas phase and liquid phase in
the fractionation column), completely separate the light HC and diesel
out of base oil to get precise cuts of different grade of diesel fractions
from both of side line and bottom line. Ensuring the authentic
continuous operation and quality of different cuts.
 The fractionating is an optional solution based on the budget of your pending project.
_ ________________________________________________________________________________________________
7. ZERO Emission and ZERO Environment Impact
Fully enclosed distillation system, PurePath Patented Exhaust purification, sludge recycling technologies ensuring ZERO
pollutions to the environment.
-Gas recycling and purification technologies (Turning emission into CO2 & H2O)
-Optional package for smell removal (UV Photolysis Unit)
-Optional equipment for sludge recycling (Pet-coke Furnace)
8. First class workmanship and superior parts
We have the best supply chain management to make sure every single parts and components come with the best qualities and reasonable pricing.
Every single parts of PPGT-BP plant have passed the severe inspection procedures including Raw Material Inspections, Hot Rolling Process, Ultrasonic Flaw
Detections, Pressure Tests, Humidity & High Temperature Resistance Tests, Piping & Instrument Tests, Valve Tests and even Running Test before the shipment to
ensure the best quality to be delivered to each of our valuable customer.
_ ________________________________________________________________________________________________
9. REAL- AUTOMATION(OPTIONAL)
 Mobile App Real-Time Monitoring & DCS/PLC Control System optional
 Dual Control (Automatic & Manual) Design, make sure the plant will be running
properly even if the PLC is not functioning.
App Real-Time Monitoring, have everything under control.

All running statuses of this plant, including the Temperatures, Pressures, Vacuums, Flows,
Oil Levels, Catalysts & Adsorbent consumptions and Flammable Gas Detection will be
displayed in your
mobile App.
_ ________________________________________________________________________________________________
10. Extra thicker steel plates delivery extra durability and

safety.
11. International brand parts & components available

(Controller, Pump, Burner, Sensors, Breaker etc.)
12．TOP SECERUITY DEVICES (OPTIONAL)
Flammable gas detections, Weather Resistant, Lightning Proof, Anti-Explosion Design, Making everything under your control.
_ ________________________________________________________________________________________________
APPLICATIONS (Converting waste lubricants into commercial diesel fuel)
WASTE OIL (INCLUDING MINERAL OIL, SYNTHETIC OIL AND SEMI-SYNTHETIC OIL)
WASTE ENGINE OIL, HYDRAULIC OIL, GEAR OIL，TRANSFORMER OIL, TYRE/PLASTIC PYROLYSIS OIL
_ ________________________________________________________________________________________________
What makes PurePath is so different from others?

Difference PPGT-BP Competitors Our Advantages
Professional Engineers Team Yes No Mechanical, petrochemical process, Piping & Instrument , Electrical and Pressure Vessel Engineers
Continuous Operation Yes No Authentic Continuous Operation, Cost effective & Time saving
Patented Catalysts Yes No Improve the purity, viscosity & color of the product oil
Real Fractionating Technology Yes No Ensuring gas-liquid mass transfer process and getting the purest product oil
Thin Film Evaporation Yes No TFE technology for light HC and water removal
DCS/PLC Control System Yes No DCS & PLC control optional
Indirect Heating Yes No More secure & less coking
Mobile App Real-Time Monitoring Yes No Temps, pressures, vacuums, flows, oil level and catalysts consumptions etc. online monitoring
Exclusive Desulphurization Technology Yes No Exclusive desulfurization unit and formulated catalysts
High Temp. Resistance Painting Yes No High temperature and corrosion resistance
Dual Control System(Auto-Manual) Yes No Auto-Manual dual controls to prevent PLC malfunctioning
Reflux Unit Yes No Precisely controlled reflux ratio makes precise cuts to be separated
Exhaust Purification Unit Yes No Spray column, Adsorption column & UV photolysis unit ensuring ZERO pollutions to environment
5S & ISO Quality Control Yes No More options on buyer’s hands
Lifespan After sale service Yes No PPGT providing you after sell service in its whole life-cycle of our distillation plant
Anti-Coking Technology Yes No Prevent coking in distillation column from happening
Supply Chain Management Yes No Well organized and scientific SCM system
High Quality Product Base Oil Yes No API Group 1 SN150,SN350 Base Oil
Weather Resistance Yes No Rain proof, Lightning proof
Anti-Explosion Design Yes No Anti-Explosion motors and control system are provided
Flammable Gas Detection Yes No Preventing accident caused by flammable gas leakage
Dual Safety Valves Yes No Dual safety valves deliveries dual protections
One-Stop Service Yes No Catalysts, Absorbents, Lab Instruments, Additive Package & Blending unit are provided
Full set of professional manuals & drawings Yes No Instruction Manual, Layout, PFD, PID, CLD & HAZOP are provided
_ ________________________________________________________________________________________________
We don’t compromise on price as we don’t compromise on quality.
We only take reasonable profit for our equipment as we have to keep providing our clients with the best product and service. In the meanwhile, PPGT has been paying
a lot on the R&D of new technologies every single year.
What are the byproducts out from PPGT-LP waste oil distillation plant, how do I dispose it?
The byproduct is usually including syngas, water, oil sludge/residue & used catalysts
The syngas will be purified for emission or recycled as heating fuel before purification process;
The water can be separated from light HC and further purified before discharging;
The oil sludge can be used for burning or as material for making pet-coke, asphalt etc.
The used catalysts can be either handling over to the recycler or regenerated by special equipment.
What are the consumables of this system?
Desc. Dosage Unit Price(MT) Cost Per Ton of waste oil Function
Pretreatment Additives 1% 450USD 4.5usd Removal of heavy metals, impurities, sulfur etc.
Cracking Catalyst 0.5% 1500USD 7.5usd Cracking molecular links from waste oil to produce diesel
Refining Adsorbent 3-5% 750USD 37.5usd Removal of color bodies, asphaltenes, colloids & impurities
 The prices of above consumables might be subject to change due to market condition.
_ ________________________________________________________________________________________________
Are those consumables essential or can we work without them?
As a matter of fact, those additives required for PPGT process are carefully selected and proved to be essential to the re-refining/pyrolysis process even for those
famous refineries from all over the world.
In order to get you a better understanding of all consumables which may be required for waste oil re-refining/distillation process, let’s us introduce you with each of
those one by one.
 Pretreatment Additives, it is used to be acting as a super flocculants which is able to remove the heavy metals, suspensions, mechanical impurities and
damaged engine oil additives which will effect the purity, viscosity and color of product base oil and thus it is absolutely necessary and essential;
 Cracking catalyst inside of distillation column will be applied for cracking the molecules of long chain hydrocarbons into short chains to produce high quality
diesel fuel;
 Refining Adsorbents, also known silicon dioxide based adsorbent which is able to adsorbing color bodies, oxidants, sulfide & impurities from product oil;
_ ________________________________________________________________________________________________
What is the yield of this system? How long can I take back my investment? (DAILY TURNOVER)
Daily cost of PPGT-LP-7
Items Consumptions Q'TY(MT) Unit Cost(USD) Cost Per Day(USD) Remark
Power 25 Kwh/T 50 0.174 $217.50
Utilities Fuel Oil 20 KGS/T 50 0 $0.00 Produced by plant
Cooling Water 100 T 200 0 $0.00 Reusable
Cracking Catalyst 5 KGS/T 50 1.5 $375.00
PRE Additive 10 KGS/T 50 0.45 $225.00
Raw Materials
Refining Adsorbent 50 KGS/T 50 0.75 $1875.00
Waste Oil 1 T 50 150 $7500.00
Labor Cost Technicians 3 Shift 4 People 25 $300.00
Cost in Total: $10,492.50
Daily profit of PPGT-LP-7
Items Yield Q'TY(MT) Unit Price Total Price Remark
Fuel oil 5% 2.5 500 $1,250.00
Diesel Fuel 85% 42.5 600 $25,500.00
Output
Asphalt 7% 3.5 275 $962.50
Water & Gas 3% 0 0 $0.00
Price in Total: $27,712.50
Daily Gross Income: $17,220.00
CHARACTERISTICS OF TYPICAL USED LUBE OIL

_ ________________________________________________________________________________________________
Specific gravity 0.915

Viscosity, cst
at 40°C 130
at 100°C 15
PCB / PCT, wt ppm 25 max

Cl, wt % 0.5 max
S, wt % 1.5 max
Saponification N°, mg KOH/g 20 max
Heavy fuel oil (drop test) pass
Fatty acids (lux test) pass
OVERALL MATERIAL BALANCE (NORM.)
USED LUBE OIL 100%
Water & Light ends 3%

Gasoil 5%
Diesel Fuel Fraction 85%
Asphaltic Residue 7%
CHARACTERISTICS OF DIESEL FUEL PRODUCED BY PPGT-LP WASTE OIL DISTILLATION PLANT
_ ________________________________________________________________________________________________
Characteristics Diesel Fuel
Flash point, °C 61
Water & Sediment Trace
Density at 15 °C kg/L 0.8355
Ash Content % (m/m) 0.001
Sulfur, wt.% 0.005
Cetane Index 55.8
Copper Strip Corrosion 1a
Carbon Residue % 0.1
Pour Point °C -21
Color 1.0
CHARACTERISTICS OF ASPHALTIC RESIDUE OUT OF PPGT-BP WASTE OIL RE-REFINING PLANT
Specific gravity at 15 °C 0.950 -1.050

Viscosity, cst
at 40 °C 10,000
at 100 °C 80
Sulfated ash, wt% 3-4
Sulfur, wt% 1-2
Penetration, mm/10 at 25 °C 200-400
Softening point, °C 15-20
Residue contains high quantity of polymers and metals and can be used for asphalt blending, production of paving asphalt, bitumen protective covering or as
fuel in the cement factories.
Installation and Commissioning:
_ ________________________________________________________________________________________________
The seller shall send at least one engineer to the buyer’s assigned place at agreed time by both parties to conduct installation, commissioning and training of sold
machines. The cost which may be including Visa, Round tickets, Accommodation, Meals, Transportations, Essential tools etc. during engineer service process shall be
borne by the buyer.
Guarantee of Quality:
The Seller shall guarantee that the goods are made of the best materials and of first class workmanship, brand new, and comply in all respects with the quality and
specifications and performance as stipulated in this Contract. The Seller shall guarantee that the goods, when correctly installed, properly operated and maintained,
shall give satisfactory performance for a period of up to 24 months after the day of completion of installations.
Coverage：
The warranty foresees the supply, free of charge, of the parts of the machine that get broken due to manufacturing defects.
The warranty does not cover damages and/or loss of production due to machine stops or for the bad running caused by the damage.
The warranty does not cover the time required for the arrival of the new parts.
_ ________________________________________________________________________________________________
PRO/II SIMULATION
_ ________________________________________________________________________________________________
ASPEN SIMULATION
_ ________________________________________________________________________________________________
LABORATORY
_ ________________________________________________________________________________________________
MANUFACTURING PROCESS
_ ________________________________________________________________________________________________
REFERNCE PROJECT

Factory Address: Luohuang Industrial Park, Jiangjin Dist., Chongqing, China E-Mail: Tel

Uploaded by

Copyright:

Available Formats

Factory Address: Luohuang Industrial Park, Jiangjin Dist., Chongqing, China E-Mail: Tel

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Factory Address: Luohuang Industrial Park, Jiangjin Dist., Chongqing, China E-Mail: Tel

Uploaded by

Copyright:

Available Formats

CHONGQING PUREPATH GREEN TECHNOLOGY CO., LTD.

Factory Address: Luohuang Industrial Park, Jiangjin Dist., Chongqing, China

PPGT-LP Waste Oil Distillation Plant (for Diesel Production)

PROCESS FLOW DIAGRAM OF PPGT-LP WASTE OIL DISTILLATION PLANT

Heating Power 21KGS LPG/24KGS FUEL OIL/280KWH/PER TON OF WASTE OIL

Power Consumption 15KWH PER TONS OF WASTE OIL

Vacuum Degree ≦-0.05KPa

Heating Method Fuel Oil/Natural Gas/LPG/Electricity

Heating Temp. 160-450℃

Voltage 220/380/415V 50/60HZ

Dimensions(L*W*H) 10*4.2*5.8 M 11.5*4.5*6.0 M 13*5.0*7.0 M 15*5.5*7.5 M 18*6.0*8.0 M 25*7.0*10 M 35*10*12 M

Approx. Weight 10T 12T 15T 18T 22T 26T 35T

*TPD=Tons Per Day

FEATURES & ADVANTAGES

1. Designed by PurePath engineers team

Professional makes Perfect

2. API Standards of Diesel Fuel

Refer the test report for more information.

3. Exclusive Sulfur Removal Unit

PPGT Sulfur Removal Unit was developed by our

* If you are looking for a result of Sulphur content to be

5. Thin Film Evaporator

6. Real Fractionating with exclusive customized plate column

Precisely calculated numbers, distances & fractional hole areas of

7. ZERO Emission and ZERO Environment Impact

8. First class workmanship and superior parts

App Real-Time Monitoring, have everything under control.

10. Extra thicker steel plates delivery extra durability and

11. International brand parts & components available

12．TOP SECERUITY DEVICES (OPTIONAL)

APPLICATIONS (Converting waste lubricants into commercial diesel fuel)

What makes PurePath is so different from others?

We don’t compromise on price as we don’t compromise on quality.

What are the consumables of this system?

Are those consumables essential or can we work without them?

Daily Gross Income: $17,220.00

CHARACTERISTICS OF TYPICAL USED LUBE OIL

Specific gravity 0.915

PCB / PCT, wt ppm 25 max

OVERALL MATERIAL BALANCE (NORM.)

USED LUBE OIL 100%

Water & Light ends 3%

CHARACTERISTICS OF DIESEL FUEL PRODUCED BY PPGT-LP WASTE OIL DISTILLATION PLANT

Characteristics Diesel Fuel

CHARACTERISTICS OF ASPHALTIC RESIDUE OUT OF PPGT-BP WASTE OIL RE-REFINING PLANT

Specific gravity at 15 °C 0.950 -1.050

Installation and Commissioning:

You might also like

Dimensions(LWH) 104.25.8 M 11.54.56.0 M 135.07.0 M 155.57.5 M 186.08.0 M 257.010 M 351012 M