Obitek Sap500: Access Points

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

DATASHEET | SAP500

OBITEK SAP500 ACCESS POINTS


802.11ac dual band 2x2 MIMO Indoor access point

SAP500 is an 802.11ac Wi-Fi standard high power Ceiling Wireless


Access Point with MTK chipset, combined 1200Mbps Wi-Fi speed over
2.4GHz (300Mbps) and 5GHz (900Mbps), make more than 80 end
users can access into it. It is an economic option for hotel, school,
restaurant or other enterprise place.

802.11a/b/g/n/ac 1200 Mbps, 2x2 MIMO Concurrent user 128+

FIT/FAT together Standard PoE input Cloud management

Features and Highlights


Entry-level enterprise-class indoor 802.11ac wireless Good PoE compatibility
access point
SAP500 has integrated IEEE802.3at Power over
SAP500 supports the 802.11a/b/g/n/ac standard, Ethernet (PoE), for easy installation and lower cost.
operates in 2.4 GHz and 5 GHz both bands, and So it can be installed in areas where power outlets
provides an access bandwidth up to 1200Mbps. are not readily available, eliminating the mess of
Based on a good performance, concurrent users can altering existing network infrastructure.
be 128+.

Flexible mounting Support Mesh mode


SAP500 can support wall mounting, ceiling SAP500 can support Mesh mode under both fits/fat
mounting, you can deploy it according to the actual AP mode. Use 2.4GHz and 5GHz to achieve wireless
environment. bridging function.

Cloud management Dual-mode fit & fat


SAP500 can operate with the Obitek cloud platform SAP500 can work in fit or fat mode and can flexibly
seamlessly to provide a better cost-performance switch between the fit mode and the fat mode
solution; it can help SMB customers enjoy the stable according to network planning requirements.
wireless connection at a lower cost.

1
© 2021 Obitek Networks Ltd. All rights reserved | SAP500 indoor access point datasheet
HARDWARE
Chipset MT7628DAN + MT7613BEN
Standard 802.11 b/g/n/ac, 2x2 MIMO technology
Memory 64MB
Flash SPI NOR 8MB
1 x 10/100/1000Mbps RJ45 WAN Port
Interface 1 x 10/100/1000Mbps RJ45 LAN Port
1 x Reset button, press 15 seconds to revert to default setting
Build in 5.5dBi 2.4GHz MIMO Antenna
Antenna
Build in 4.5dBi 5.8GHz MIMO Antenna
WI-FI FEATURES
2.4GHz: 802.11b/g/n: 2.4GHz ~ 2.484GHz,
Frequency band
5GHz: 802.11a/n/ac: 5.150GHz ~ 5.850GHz
RF Power ≤ 22dBm (2.4GHz), ≤ 21dBm (5GHz)
Country code FCC, IC, ETSI, MKK, MKK1, MKK2, MKK3, NCC, RUSSIAN, CN
OFDM = BPSK, QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM
Modulation
DSSS = DBPSK, DQPSK, CCK
Throughput 1200Mbps
SSID 8 SSID (4 SSID for 2.4GHz, 4 SSID for 5.8GHz)
Wireless Security 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption
Max Users Up to 128 (64 per frequency)
Operation mode Wireless AP, Gateway
WAN Type Dynamic IP/Static IP/PPPoE
IP Address Filter/MAC Address Filter/Domain Filter
Firewall IP and MAC Address Binding
DMZ
Protocols IPv4
PPM ±20ppm
POWER SUPPLY
PoE WAN Port 48V 0.5A 802.3at PoE
External power adapter 12VDC 1A
Power consumption ≤ 10W
ESD ±6KV
Surge Protection Different mode: ±2KV
OTHERS
Dimensions (L x W x D) 188mm x 188mm x 33mm
Weight NA
LED Indicator Sys, 2.4GHz WIFI, 5.8GHz WIFI, LAN, WAN
SAP500 dual band wireless access point
Ethernet cable
Package Contents
Quick installation guide
Installation accessory
Operating temperature: -20~55 ℃
Extremity working temperature: -30~70 ℃
Environment
Storage temperature: -40~70 ℃
Humidity: 5%~95% non-condensing
Management WLAN Controller, Cloud Management System
Certification CE, ROHS, FCC, TUV

2
© 2021 Obitek Networks Ltd. All rights reserved | SAP500 indoor access point datasheet

You might also like