Data sheet 6GK1571-1AA00
Product type designation CP 5711
COMMUNICATIONS PROCESSOR CP5711 USB-ADAPTOR (USB
V2.0) FOR CONNECTING A PG OR NOTEBOOK TO PROFIBUS
OR MPI; CONTAINS 2M USB CABLE
Transmission rate
Transfer rate
● at the 1st interface / acc. to PROFIBUS 9.6 kbit/s ... 12 Mbit/s
Interfaces
Number of electrical connections
● at the 1st interface / acc. to PROFIBUS 1
● for power supply 1
Number of interfaces / acc. to USB 1
Type of electrical connection
● at the 1st interface / acc. to PROFIBUS 9-pin Sub-D socket (RS 485)
● for power supply 2-pole terminal block
● of the USB interface Standard-B socket with mechanical interlock
Standard for interfaces / USB 2.0 Yes
Supply voltage, current consumption, power loss
Type of voltage / of the supply voltage DC
Type of voltage supply / optional external supply Yes
Supply voltage
6GK1571-1AA00 Subject to change without notice
Page 1/4 10/20/2017 © Copyright Siemens
● from USB 5 V
● external 24 V
● external 18 ... 30 V
● Note Supplied directly from USB provided that supply from PC is
adequate; alternative external supply is possible
Relative symmetrical tolerance / at DC
● at 5 V 5 %
● at 24 V 5 %
Consumed current
● from USB 0.5 A
● from external supply voltage / at DC / at 24 V / 0.3 A
maximum
Power loss [W] 2.5 W
Permitted ambient conditions
Ambient temperature
● during operation 0 ... 60 °C
● during storage -40 ... +60 °C
● during transport -40 ... +60 °C
Relative humidity / at 25 °C / without condensation / 85 %
during operation / maximum
Protection class IP IP20
Design, dimensions and weight
Module format USB V2.0 adapter
Width 85 mm
Height 137 mm
Depth 35 mm
Net weight 300 g
Mounting type Mounting on DIN rail with optional mounting rail support
Mounting type / 35 mm DIN rail mounting Yes
Number of plug-in cards of same design / plug-in / 1
per PC station
Number of units / Note -
Performance data
Performance data / open communication
Software / for open communication / by means of Yes, SOFTNET-PB DP / SOFTNET-PB DP Slave / SOFTNET-PB
SEND/RECEIVE / required S7
Number of possible connections / for open 50
communication / by means of SEND/RECEIVE /
maximum
Performance data / PROFIBUS DP
Software / for DP master function / required Yes, SOFTNET-PB DP
Service / as DP master
6GK1571-1AA00 Subject to change without notice
Page 2/4 10/20/2017 © Copyright Siemens
● DPV0 Yes
● DPV1 No
● DPV2 No
Number of DP slaves / on DP master / usable 64
Amount of data
● of the address area of the inputs / as DP 15616 byte
master / total
● of the address area of the outputs / as DP 15616 byte
master / total
● of the address area of the inputs / per DP slave 244 byte
● of the address area of the outputs / per DP 244 byte
slave
● of the address area of the diagnostic data / per 244 byte
DP slave
Software / for DP slave function / required Yes, SOFTNET-PB DP slave
Service / as DP slave
● DPV0 Yes
● DPV1 No
Amount of data
● of the address area of the inputs / as DP slave / 122 byte
total
● of the address area of the outputs / as DP slave 122 byte
/ total
Performance data / S7 communication
Software / for S7 communication / required Yes, SOFTNET-PB S7
Number of possible connections / for S7/PG 8
communication / maximum
Performance data / multi-protocol mode
Number of configurable connections / per PC station 207
Product functions / management, configuration
Configuration software / required Included in the scope of delivery of the required software product
Product functions / Diagnosis
Product function
● Port diagnostics Yes
Standards, specifications, approvals
Standard
● for EMC 2004/108/EC
● for safety / from CSA and UL CAN/CSA C22.2 & UL 60950-1
● for emitted interference EN 61000-6-3, EN 61000-6-4
● for interference immunity EN 61000-6-1, EN 61000-6-2
Certificate of suitability
6GK1571-1AA00 Subject to change without notice
Page 3/4 10/20/2017 © Copyright Siemens
● CE marking Yes
● C-Tick Yes
Accessories
accessories optional: MPI cable, mounting rail support
Further Information / Internet Links
Internet-Link
● to website: Selector SIMATIC NET http://www.siemens.com/snst
SELECTION TOOL
● to website: Industrial communication http://www.siemens.com/simatic-net
● to website: Industry Mall http://www.siemens.com/industrial-controls/mall
● to website: Information and Download Center http://www.siemens.com/industry/infocenter
● to website: Image database http://automation.siemens.com/bilddb
● to website: CAx Download Manager http://www.siemens.com/cax
● to website: Industry Online Support https://support.industry.siemens.com
Security information
Security information Siemens provides products and solutions with industrial security
functions that support the secure operation of plants, solutions,
machines, equipment and/or networks. They are important
components in a holistic industrial security concept. With this in
mind, Siemens’ products and solutions undergo continuous
development. Siemens recommends strongly that you regularly
check for product updates. For the secure operation of Siemens
products and solutions, it is necessary to take suitable preventive
action (e.g. cell protection concept) and integrate each component
into a holistic, state-of-the-art industrial security concept. Third-
party products that may be in use should also be considered. For
more information about industrial security, visit
http://www.siemens.com/industrialsecurity. To stay informed about
product updates as they occur, sign up for a product-specific
newsletter. For more information, visit
http://support.automation.siemens.com. (V3.4)
last modified: 09/20/2017
6GK1571-1AA00 Subject to change without notice
Page 4/4 10/20/2017 © Copyright Siemens
