brands you trust.
5060
Horizontal
Split-case Capacities to 7000 GPM
Pumps Heads to 500 Feet
Single stage, double suction
Three year shaft warranty
D
eming Double-Suction, Horizontal Split-Case
Centrifugal pumps combine the latest in APPLICATIONS:
hydraulic design with almost a century of • General Water Supply
application experience to meet today’s industrial and • Booster Service
• Municipal Waterworks
municipal requirements.
• Air Wash Applications
• Condenser Cooling
Deming Split-Case pumps offer long life, higher • Water Circulation
efficiencies, less downtime and lower maintenance • Industrial Service
costs. Maximum interchangeability of standardized • Building Service
parts simplifies the design. Heavy fabricated steel • Chemical Plants
bases or cast iron, including drip lip type, are available • Pollution Control
• Power Plants
to mount the pump and driver. Flexible shaft coupling
• Marine Service
connects drive to pump.
A standard horizontal design pump can also be vertically
mounted with grease lubricated bearings and mechanical
shaft seal. Vertical units require minimum floor space,
offer an in-line piping arrangement and provide greater
motor protection in areas prone to flooding. The flexibility
of the Deming 5060 Series supports a wide variety of
applications.
DEMING 5060 SERIES
Design Features: impeller ring is pressed on, then
1. Compact design - Heavy shaft attached with double set screws.
and short bearing span reduce 5. Shaft sleeve - Protects the
shaft deflection, providing longer shaft against corrosion and
mechanical seal and bearing life, wear. Extends through gland
and lower maintenance costs. for maximum shaft protection.
Requires less floor space. Outboard and inboard sleeves
2. Casing - Horizontally threading in opposite directions
split, upper and lower against the impeller hub so both
half bolted and doweled sleeves tighten with rotation and
to provide perfect allow for thermal expansion.
alignment. Bearing 6. Shaft - Large diameter, precision
supports are cast and machined; 4140 steel shaft
bored integrally with provides maximum strength with
lower half casing. Upper minimum deflection. Alloy shafts
half easily removed for are also available.
inspection of complete 7. Bearings - Outboard bearing is
rotating assembly without double row type, accepting radial
disturbing bearings or alignment. and thrust loads. Inboard bearing
Flanged suction and discharge is single row, to handle radial
connections located in the lower load, and is free to move axially in
half casing, permit inspection and housing to compensate for shaft
maintenance without disturbing expansion due to temperature
piping or drive alignment. Short changes. Dual lip seals protect
dimension between suction from dirt and moisture. Grease
and discharge flanges permits lubrication is standard, with oil
retrofitting of other split-case optional.
units. 8. Stuffing box/mechanical seal
3. Impeller - Enclosed, double- - Stuffing box is extra deep to
suction type. Cast in one-piece and accept minimum of five rings
hydraulically balanced to minimize of packing and lantern ring.
thrust, ensure longer bearing life, Internally drilled liquid passage
and smooth operation. Keyed to in upper half casing provides
shaft and locked in position by balanced pressure and lubrication
threaded shaft sleeves. to the packing/seal area and
4. Wearing Rings - Close running eliminates the requirement for
clearance minimizes pressure outside recirculation lines that
leakage between suction and can be pinched or bent. External
discharge chambers of the casing. lubrication, such as water under
Easily replaceable. Casing rings pressure, may be connected to
standard on all sizes are designed upper half casing. Heavy split
with a labyrinth to prevent gland facilitates maintenance.
rotation. No need to worry about Wide choice of mechanical seals
a pin shearing under load. The available.
2012 Crane Pumps & Systems, Inc.
A Crane Co. Company A Crane Co. Company
Printed in U.S.A.
D5060BRO - Rev. B (5/14)
Crane Pumps & Systems Crane Pumps & Systems Canada
420 Third Street 83 West Drive
Piqua, Ohio 45356 Brampton, Ont. Canada L6T 2J6
(937) 778-8947 (905) 457-6223
Fax (937) 773-7157 Fax (905) 457-2650
www.cranepumps.com
brands you trust.
