Scribd
Upload
168 views2 pages

Beam Analysis: LP LB LR

This document summarizes the results of a beam analysis for a W16X89 steel beam. It provides key properties of the beam section including dimensions, section properties, and material properties. It then analyzes the beam for bending about its major and minor axes. For bending about the major axis, it determines the beam is compact and calculates the nominal moment capacity as 989.43 kN-m and design moment capacity as 890.49 kN-m. For bending about the minor axis, the nominal moment capacity is 271.66 kN-m and design capacity is 244.50 kN-m. In both cases, the maximum moment is less than the design capacity so the beam passes the design checks.

Uploaded by

Lester John Precillas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
168 views2 pages

Beam Analysis: LP LB LR

This document summarizes the results of a beam analysis for a W16X89 steel beam. It provides key properties of the beam section including dimensions, section properties, and material properties. It then analyzes the beam for bending about its major and minor axes. For bending about the major axis, it determines the beam is compact and calculates the nominal moment capacity as 989.43 kN-m and design moment capacity as 890.49 kN-m. For bending about the minor axis, the nominal moment capacity is 271.66 kN-m and design capacity is 244.50 kN-m. In both cases, the maximum moment is less than the design capacity so the beam passes the design checks.

Uploaded by

Lester John Precillas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

BEAM ANALYSIS

3G-2
PROPERTIES of : W16X89 English Unit
W410X132 S.I. Unit
Steel Grade = A992 Zx = 2870.00 mm^3
Area = 16900.00 mm^2 Sy = 515.00 mm^3
d = 427.00 mm Zy = 788.00 mm^3
bf = 264.00 mm ry = 63.20 mm
tw = 13.30 mm J = 2270.00 mm^4
tf = 22.20 mm Cw = 2740.00 mm^6
rts = 73.20 mm ho = 404.00 mm
Ix = 541.00 mm^4 Fy = 344.75 MPa
Sx = 2540.00 mm^3 Fu = 448.18 MPa
rx = 179.00 mm E = 200000.00 MPa
For Cb :
Mmax = 703.481
Ma = 181.79
Mb = 365.222
Mc = 63.382
Computed Cb = 2.22
Classification of Shapes Results
𝝀 𝝀𝒑 𝝀𝒓
5.92 9.15 24.09

27 90.56 137.29

REMARKS : Lb = 9000.00 mm
Flange Flange is Compact!! Lp = 2679.12 mm
Web Web is compact!! Lr = 9201.98 mm

Therefore, use
equation :
Lp < Lb ≤ Lr
FOR COMPACT SECTION

Proceed to CONDITION 2

NOTE: ignore the other condition that is not mention above !!


CONDITION 1 :
Mn = Mp
Mn = Mp = 989.433 kN.m
ØMn = 890.489 kN.m

CONDITION 2 :
Mn = 989.433 kN.m
ØMn = 890.489 kN.m

CONDITION 3 :
Fcr = 550.92 MPa
Mn = 989.433 kN.m
ØMn = 890.489 kN.m

FOR NONCOMPACT SECTION

NOTE: if the section is compact, this data is not applicable !!


Mn = -131486.641 kN.m
ØMn = -118337.977 kN.m

Therefore, use ØMnx :

Mnx = 989.433 kN.m


ØMnx = 890.489 kN.m
REMARKS:
Mmax ≤ ØMn
SAFE!

BENT ABOUT THEIR MINOR AXIS

@Yielding
Mn = Mp = 271.663 kN.m
ØMn = 244.497 kN.m

@Flange Local Buckling Note : Local Buckling Does Not Apply if the flange is
Flange is Compact!! Compact
Mn = 271.663 kN.m
ØMn = 244.497 kN.m

Therefore, use ØMny :

Mny = 271.663 kN.m


ØMny = 244.497 kN.m
REMARKS:
Mmax ≤ ØMny
SAFE!

You might also like