Scribd
Upload
62 views2 pages

Iber Initial Configuration

Uploaded by

oscar ruben
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
62 views2 pages

Iber Initial Configuration

Uploaded by

oscar ruben
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Support document

Contact: [email protected]

Installation process
Setup of Iber
The setup process is easy and fast:

 Open the zip file and unzip IberXXX-win-xZZ-Install.exe, where XXX is the downloaded version and ZZ is 32
or 64 bits system (the system type is shown on your computer Properties).
 Install Iber:

Your first time with Iber


When you open Iber for the first time, you should configure the visualization themes and the graphical card
configuration:

 For integrated graphical cards or if you don’t know the graphical card model, it is convenient to use “Safe 1
visualization mode”.
 Is you have a 250 Mb graphical card or higher, it is better to use “Fast visualization mode”.

© Copyright. CIMNE – UdC – UPC. All rights reserved.


www.iberaula.es
www.ibercursos.com
Support document
Contact: [email protected]

If appears the following message, the graphical card configuration has not been done properly.

It is necessary to changes the graphical configuration. Go to Start >> Programs >> Iber >> Iber Safe Mode menu.

This window allows you to:

 Change the Initial graphics configuration:


o Fast visualization mode needs to activate Software OpenGL
o Secure visualization mode does not need to activate Software OpenGL
 Reset preferences (it is recommendable to “Reset preferences” when you changes your graphical card
configuration).

When I know if I have the properly graphical configuration?


Depends on the graphical card of your computer, it is convenient to change your visualization mode when you
detect some visualization problems. For example:

 If some area of the geometry or the mesh is selected and the selection does not be represented (the
colour does not change)
 The mesh has wrong visualization (different colours and lines sizes)
 If a line is drawn but it does not appear on the screen

© Copyright. CIMNE – UdC – UPC. All rights reserved.


www.iberaula.es
www.ibercursos.com

You might also like