TIJ BK640 Ink Data Sheet

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

G20i Thermal Ink Jet Ink BK640

BK640 is a high contrast ink suitable for printing onto a wide


range of porous substrates such as

BK640 is a water based black BK640 has been developed by  Domino developed ink
ink that is unique to Domino. Domino, targeting pack and case to deliver market
Developed to ensure dark, clear coding to ensure the ink meets and leading contrast, to
produce crisp and clear
codes with the best code quality exceeds the ink performance
codes onto porous
every time, BK640 provides requirements in these target substrates.
long de-cap times, improved applications.
throw distance and high  Long throw distance of
up to 5mm allowing
contrast
variance of product
presentation to the
print head.

 Extended de-cap times


over 4 hours to ensure
perfect first code even
on slow and
intermittent product
lines.

FIG .1

Domino. Do more
Product overview
G20i Black Water Based Ink. BK640

Applications and Regulatory Considerations

This ink is suitable for use on Functional barriers.


With some packaging, such as plastic containers and film
substrates, it is possible that ink components may migrate
through to the foodstuffs inside: a ‘functional barrier’ is
where any migration is within defined limits. It is the
customer’s responsibility to carry out migration tests of the
printed codes on their products; Domino can offer support
under NDA.

This ink is suitable for use on Absolute barriers


Containers such as metal cans where there is zero
possibility of ink components migrating through the
container into the packed food/drink inside.

This ink is compliant with Swiss Ordinance SR817.023.21. This ink is manufactured to EuPIA GMP standards. If unclear
about the suitability of this ink in a given application, please refer to your local Account Contact who will escalate via Channel
Support as needed.

Part numbers and packaging


Part number Container Quantity Shelf life
Ink TIJ-Bk640-5 Cartridge (42ml) Each 12 months

Printer compatibility
G20i Only (Cannot be used with G100, G200. G300, G130i,
G230i, G120i, G220i, G320i or G320i OEM)

End user properties


Long de-cap time / up to 5mm throw distance / high prints per cartridge: e.g. 290,000 prints/cartridge at 300x300 dpi for the
Fig. 1 sample message shown on the front page /.

Storage and operational environment


Fluids storage and transportation Temperature: 100C to 300C Humidity: 10%-90% RH non-condensing
Printer operational environment Temperature: 100C to 400C Humidity: 10%-90% RH non-condensing
(De-cap time will be adversely affected at 100C and between 300C - 400C)

Supporting Documentation
Safety Data Sheets SDS’s for all supported jurisdictions / languages are available through Dominocasecoding.com
Technical Data Sheet Available through Dominocasecoding.com

Quality Assurance
Domino always recommends that only Domino fluids are used in Domino printers. All Domino fluids are fully tested in Domino
printers to assure optimum levels of performance throughout the specified operational envelope. All Domino fluids should be
used within their rated Shelf Life.

We reserve the right to change the design or specification of our products without notice. Some of the information contained in this brochure
is general in nature and customers should check that it is applicable to their individual circumstances. Version OD1 September 2016.

Domino UK Limited Bar Hill Cambridge CB23 8TU T +44 1954 782551 F +44 1954 785554
Registered Office Bar Hill Cambridge CB23 8TU Reg No. 1750201 England VAT No. 388 7030 22

You might also like