Scribd Logo
Upload

Welcome to Scribd!

  • 38 views

    Telephone: Fax: VAT Registration No.:: Tightening Torques

    Uploaded by

    Adrian Macaya
    This document provides tightening torque specifications and instructions for various components of a 2000-01 Jeep Cherokee 4.0 engine. It lists torque values for main bearings, big end bearings, cylinder head bolts, sump bolts, flywheel, and other parts. Notes provide additional instructions, such as tightening cylinder head bolts in stages and applying locking fluid to reused bolts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Telephone: Fax: VAT Registration No.:: Tightening Torques

    Uploaded by

    Adrian Macaya
    38 views3 pages
    This document provides tightening torque specifications and instructions for various components of a 2000-01 Jeep Cherokee 4.0 engine. It lists torque values for main bearings, big end bearings, cylinder head bolts, sump bolts, flywheel, and other parts. Notes provide additional instructions, such as tightening cylinder head bolts in stages and applying locking fluid to reused bolts.

    Original Title

    _untitled

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides tightening torque specifications and instructions for various components of a 2000-01 Jeep Cherokee 4.0 engine. It lists torque values for main bearings, big end bearings, cylinder head bolts, sump bolts, flywheel, and other parts. Notes provide additional instructions, such as tightening cylinder head bolts in stages and applying locking fluid to reused bolts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    38 views3 pages

    Telephone: Fax: VAT Registration No.:: Tightening Torques

    Uploaded by

    Adrian Macaya
    This document provides tightening torque specifications and instructions for various components of a 2000-01 Jeep Cherokee 4.0 engine. It lists torque values for main bearings, big end bearings, cylinder head bolts, sump bolts, flywheel, and other parts. Notes provide additional instructions, such as tightening cylinder head bolts in stages and applying locking fluid to reused bolts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

     

    Telephone:    
    Fax:
    VAT Registration No.:

    Notes Specified value Measured value


    Tightening torques
    00000001 Cylinder head instructions  
    Other engine tightening torques
    Renew
    Main bearings No  
    bolts/nuts
    00000002 Main bearings Stage 1  
    Renew
    Big end bearings No  
    bolts/nuts
    Big end bearings Stage 1 22 Nm  
    Big end bearings Stage 2 45 Nm  
    Oil pump to cylinder block 23 Nm  
    00000029 Sump bolts  
    Sump drain bolt 34 Nm  
    00000052 Flywheel/driveplate 143 Nm  
    Clutch pressure plate 54 Nm  
    Crankshaft pulley/damper centre bolt 108 Nm  
    Camshaft sprocket/gear 108 Nm  
    Camshaft/rocker cover 10 Nm  
    Inlet manifold to cylinder head 32 Nm  
    Exhaust manifold to cylinder head 32 Nm  
    Exhaust downpipe to manifold 31 Nm  
    Water pump 23 Nm  
    Spark plugs 35-41 Nm  
    Fuel rail 37 Nm  
    Crankshaft position (CKP) sensor/engine speed (RPM)
    19 Nm  
    sensor
    Camshaft position (CMP) sensor 2 Nm  
    Engine coolant temperature (ECT) sensor 11 Nm  
    Lambda sensor (Oxygen) 30 Nm  
    Oil filter 18 Nm  
    Chassis tightening torques
    Front hub 237 Nm  
    Steering wheel 54 Nm  
    Steering rack/box mounting 95 Nm  
    Steering track rod end 74 Nm  
    Brake caliper to carrier Front 15 Nm  
    Back plate to hub Rear 115 Nm  
    00000051 ABS sensor Front 5 Nm  
    00000051 ABS sensor Rear 13 Nm  
    00000075 Road wheels 115-156 Nm  

    Autodata Note 1

    Cylinder head bolts

    Fig. 75481 , Fig. 75479


    Only re-use cylinder head bolts once, coat the threads of bolt 7 (11 for 6 cyl.) with Loctite PST sealant or equivalent.
    Tighten bolts in following stages:
    Manufacturer: Jeep Model: Cherokee (84-01) 4,0 (c) Autodata Limited 2013
    Engine code: ERH Output: 127 (173) 4600 . 12/09/2019
    Tuned for: Map-DIS Year: 2000-01 V9.200-
    1) 30 Nm
    2) 61 Nm
    3) Recheck bolts are tightened to 61 Nm
    4) Bolts 1-6 (1-10 for 6 cyl.) = 149 Nm
    5) Bolt 7 (11 for 6 cyl.) = 136 Nm
    6) Bolts 8-10 (12-14 for 6 cyl.) = 149 Nm.

    Autodata Note 2

    Main bearings

    Tighten bolts of caps 1,3,4 & 5 (1,2,4,5,6 & 7 for 6 cyl.) in following stages:
    1) 54 Nm
    2) 95 Nm
    3) 108 Nm
    Move the crankshaft backwards and forwards, then load the crankshaft at the front or rear and tighten bolts of cap 2 (3 for 6 cyl.)
    as in stages 1,2 & 3.

    Autodata Note 29

    Sump bolts

    1/4 x 20 = 9,5 Nm
    5/16 x 18 = 15 Nm.

    Autodata Note 51

    If original bolts/parts are re-used apply locking fluid.

    Autodata Note 52

    Flywheel/driveplate

    Use new bolts and apply locking fluid.

    Autodata Note 75

    Road wheels

    Do NOT lubricate studs, nuts or mating surfaces.

    75481 75479

    Manufacturer: Jeep Model: Cherokee (84-01) 4,0 (c) Autodata Limited 2013
    Engine code: ERH Output: 127 (173) 4600 . 12/09/2019
    Tuned for: Map-DIS Year: 2000-01 V9.200-
    Tightening sequence

    Manufacturer: Jeep Model: Cherokee (84-01) 4,0 (c) Autodata Limited 2013
    Engine code: ERH Output: 127 (173) 4600 . 12/09/2019
    Tuned for: Map-DIS Year: 2000-01 V9.200-

    You might also like